Ti-4Al-3Mo-1V

ARMCO 400 is a low-chromium (low-cost) non-hardenable ferritic stainless steel with relatively high corrosion and oxidation resistance and good fabricating characteristics: This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: SS-250. Producer or source: Armco Steel Corporation, Advanced Materials Division.

RMI 8A1-1Mo-1V is an alpha-beta titanium alloy with a tensile strength of 135,000 psi in the mill-annealed condition. It has an excellent combination of tensile strength and creep resistance that makes it suitable for service to 1000 F. It is recommended for aircraft and jet-engine parts requiring high strength with superior creep resistance and toughness. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as creep. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, joining, and surface treatment. Filing Code: Ti-84. Producer or source: RMI Company.

RMI 25 is a grade of commercially pure titanium. It has a guaranteed minimum yield strength of 25,000 psi with good ductility and formability. Its yield strength is about the same as that of the annealed austenitic stainless steels of lowest yield strength. It has excellent resistance to corrosion by many chemicals, seawater and marine atmospheres. It is used for equipment in the chemical and marine industries. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-76. Producer or source: RMI Company.

AISI Type 204 is a chromium-nickel-manganese type stainless steel comparable in properties to Type 304 stainless steel. It is austenitic, non-magnetic, and highly corrosion resistant. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-163. Producer or source: Stainless steel mills.

NIMONIC 110 is a highly alloyed nickel-base alloy having high creep and oxidation resistance. It is recommended for aircraft gas turbine components to resist the stresses at the very high temperatures of operation. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-128. Producer or source: Henry Wiggin & Company Ltd.

Ti-7AI-12Zr is an alpha-type titanium alloy recommended for high temperature applications in the 800-1100 F range where minimum creep and high Creep strength are required. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ti-46. Producer or source: Reactive Metals Corporation.

FIRTH-VICKERS 448 is a ferritic type stainless steel having high oxidation resistance and strength at elevated temperatures. It has good creep resistance in the range 1020 to 1200 deg. F. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep, deformation, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-51. Producer or source: Firth-Vickers Stainless Steels Ltd.

SANDVIK SANICRO 31HT is an austenitic iron-nickel-chromium alloy characterized by very good resistance to oxidation with good mechanical properties at elevated temperatures. It is recommended for resistance element sheathing, pyrometer tubes, airheaters, equipment for heat treating, furnace tubes, and other equipment in the petrochemical industry. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-530. Producer or source: Sandvik.

MISCO-C is a 29% Cr-9% Ni type casting alloy having high corrosion and heat resistance. It is a type CE-30 stainless steel. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, and joining. Filing Code: SS-15. Producer or source: Michigan Steel Casting Company, Alloy Casting Division. Originally published June 1954, revised April 1965.

PYROMET 901 is a nickel-chromium super alloy designed for high strength and corrosion resistance in the temperature range of 1000-1400 F. Compounds of Ni3 (Al, Ti) type produce the precipitation hardening. It is used in a variety of high-temperature applications such as components in aircraft and gas turbines. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-216. Producer or source: Carpenter Technology Corporation.

ALUMINUM 850.0 is an aluminum-tin-nickel-copper alloy for bearings. It is used principally in the form of permanent-mold castings which, because of their rapid solidification, are characterized by a fine, dense, fatigue-resistant structure. Solid bearings machined from permanent-mold castings of this alloy are used principally in the artificially aged T5 temper for heavy-duty engine bearings. In this field Aluminum 850.0 alloy has provided satisfactory performance under conditions of very high unit loading at medium speeds and temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, forming, heat treating, machining, joining, and surface treatment. Filing Code: Al-252. Producer or source: Various aluminum companies.

Republic RS-110A is a titanium alloy containing manganese as its principle alloying element. The alloy is a medium strength, highly formable sheet alloy which has been used extensively as an aircraft structural material. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-35. Producer or source: Republic Steel Corporation, Titanium Division.

Elektron TZ6 is a further variant of Elektron Z5Z having slightly higher tensile properties and also suitable for making castings which are subject to hot tearing. This alloy also has a very low tendency to microporosity and is weldable by the argonarc process. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Mg-10. Producer or source: Magnesium Elektron Ltd.

ALUMINUM 380.0 is a copper-silicon type of aluminum die-casting alloy. It has good castability and fairly good machinability; it is the most widely used aluminum die-casting alloy. It has satisfactory strength and ductility. Among the many applications of Aluminum 380.0 are internal combustion engine parts, pressure-tight castings, ornamental castings and machine frames. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Al-239. Producer or source: Various aluminum companies.

TANTALUM is a high-density, ductile metal with excellent resistance to corrosion by most acids and good high-temperature properties. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ta-2. Producer or source: Kawecki Berylco Industries Inc.. See also Alloy Digest Ta-10, June 1988.