Ti-7Al-12Zr

RMI 25 is a grade of commercially pure titanium. It has a guaranteed minimum yield strength of 25,000 psi with good ductility and formability. Its yield strength is about the same as that of the annealed austenitic stainless steels of lowest yield strength. It has excellent resistance to corrosion by many chemicals, seawater and marine atmospheres. It is used for equipment in the chemical and marine industries. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-76. Producer or source: RMI Company.

TANTALUM is a high-density, ductile metal with excellent resistance to corrosion by most acids and good high-temperature properties. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ta-2. Producer or source: Kawecki Berylco Industries Inc.. See also Alloy Digest Ta-10, June 1988.

RMI 8A1-1Mo-1V is an alpha-beta titanium alloy with a tensile strength of 135,000 psi in the mill-annealed condition. It has an excellent combination of tensile strength and creep resistance that makes it suitable for service to 1000 F. It is recommended for aircraft and jet-engine parts requiring high strength with superior creep resistance and toughness. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as creep. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, joining, and surface treatment. Filing Code: Ti-84. Producer or source: RMI Company.

Ti-4A1-3Mo-IV is an alpha-beta type titanium alloy having a good combination of high strength, creep and stability at elevated temperatures. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear, bearing, and bend strength as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-26. Producer or source: Titanium Metals Corporation of America.

BERYLCO NICKEL ALLOY 440 is an age-hardenable nickel-beryllium-titanium alloy that offers high strength, excellent spring properties outstanding formability, good high-temperature mechanical properties, and resistance to corrosion and fatigue. Complex shapes can be produced in the solution-treated (soft) condition and then aged to a minimum tensile strength of 215,500 psi. It is used for mechanical and electrical/electronic components in the temperature range -320 to 800 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-94. Producer or source: Kawecki Berylco Industries Inc.. Originally published September 1964, revised September 1975.

Sumitomo HR11N is a high temperature nickel alloy with a high chromium content to provide excellent corrosion and oxidation resistance. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming and joining. Filing Code: Ni-718. Producer or source: Sumitomo Metal USA Corporation.

Pyromet Alloy 617 is both oxidation resistant and very strong at high temperatures. It has one of the highest allowable stress values in the ASME Boiler and Pressure Vessel Code at 982 deg C (1800 deg F). This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and machining. Filing Code: Ni-695. Producer or source: Carpenter Specialty Alloys.

APEX 85 is beat treatable aluminum sand and permanent mold casting alloy. It is recommended for applications where good high temperature strength, high hardness, resistance to wear and good machinability are required. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-177. Producer or source: Apex Smelting Company.

ALUMINUM 122 is an aluminum sand and permanent mold casting alloy recommended for applications where good high temperature strength, high hardness, resistance to wear and good machinability are required. It responds to an age-hardening heat treatment. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: Al-48. Producer or source: Aluminum Company of America.

PYROMET 901 is a nickel-chromium super alloy designed for high strength and corrosion resistance in the temperature range of 1000-1400 F. Compounds of Ni3 (Al, Ti) type produce the precipitation hardening. It is used in a variety of high-temperature applications such as components in aircraft and gas turbines. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-216. Producer or source: Carpenter Technology Corporation.

AISI Type 204 is a chromium-nickel-manganese type stainless steel comparable in properties to Type 304 stainless steel. It is austenitic, non-magnetic, and highly corrosion resistant. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-163. Producer or source: Stainless steel mills.

ARMCO 400 is a low-chromium (low-cost) non-hardenable ferritic stainless steel with relatively high corrosion and oxidation resistance and good fabricating characteristics: This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: SS-250. Producer or source: Armco Steel Corporation, Advanced Materials Division.

MISCO-C is a 29% Cr-9% Ni type casting alloy having high corrosion and heat resistance. It is a type CE-30 stainless steel. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, and joining. Filing Code: SS-15. Producer or source: Michigan Steel Casting Company, Alloy Casting Division. Originally published June 1954, revised April 1965.

Inconel Alloy 725HS is a Ni-Cr-Mo-Cb alloy that is age hardenable and is a higher strength version of Inconel alloy 725 (see Alloy Digest Ni-445, January 1994). The alloy is corrosion resistant and is often used in fastener or marine fabrication applications. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as heat treating and machining. Filing Code: Ni-604. Producer or source: Special Metals Corporation.

Crucible CG27 is a forgeable iron-nickel base alloy having an excellent combination of high temperature stress-rupture and tensile properties. It resists oxidation up to 1500 F and is recommended for gas turbine engines and turbine wheels. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-219. Producer or source: Crucible Materials Corporation.