Application of grey correlation method in wireless sensor networks

Node Localization technology is one of key technologies in wireless sensor network. DV-Hop localization algorithm is a kind of range-free algorithm. In this paper, an improved DV-Hop algorithm aiming to enhance localization accuracy is proposed. To enhance localization accuracy, average per-hop distance is replaced by corrected value of global average per-hop distance and global average per-hop error. When calculating hop distance, unknown nodes use corresponding average per-hop distance expression according to different hop value. Comparison with DV-Hop algorithm, simulation results show that the improved DV-Hop algorithm can reduce the localization error and enhance the accuracy of sensor nodes localization more effectively.

The growing awareness of the strategic value of service along with higher product performance expectations has directed many industries to adopt service centric competitive strategies in managing their supply chains. Service innovation based on currently available advanced technologies has become critical in improving enterprises’ competitive strengths. Wireless sensor network (WSN) technology, which can provide a mobile, scalable, and reliable monitoring solution, is emerging as a tool for service innovation in supply chain management. This paper provides an overview of wireless sensor network technology and discusses how it can benefit modern industries. The fundamental theories of WSN are introduced as well as an overview of the development. The impact of information technologies on supply chain management and service innovation is then briefly discussed. Much emphasis is placed on the feasibility, procedures, and critical challenges of implementing WSN in supply chain management innovation. Current and future applications of WSN are also provided, followed by a case study demonstrating the application potentials of WSN for service innovation in the healthcare industry.

This paper mainly introduces the application of multichannel communication technology in wireless sensor network. The corresponding solutions are proposed based on the analysis of the structure and characteristics of wireless sensor, and the multi-channel MAC protocol in wireless sensor network. In this paper, multi-channel communication technology in wireless sensor network (WSN) is studied, the existing problems and reasons are analysed, and some solutions to further promote the further development of the technology are put forward. With the wide application of WSN, the security of WSN has been paid more and more attention. In this paper, the existing time synchronization protocol, from the security point of view, and the fault tolerance design of the fits protocol. The protocol has an intrusion detection mechanism, which can detect the attack of malicious nodes in time synchronization. Aiming at the small deviation of slow attack and the problem of time synchronization error, information fusion is based on the quality principle, and according to the time synchronization information of different nodes, we make random weighted average correction for local time nodes. The simulation results show that the fits time synchronization protocol has good intrusion detection and fault tolerance capability.

The growing awareness of the strategic value of service along with higher product performance expectations has directed many industries to adopt service centric competitive strategies in managing their supply chains. Service innovation based on currently available advanced technologies has become critical in improving enterprises’ competitive strengths. Wireless sensor network (WSN) technology, which can provide a mobile, scalable, and reliable monitoring solution, is emerging as a tool for service innovation in supply chain management. This paper provides an overview of wireless sensor network technology and discusses how it can benefit modern industries. The fundamental theories of WSN are introduced as well as an overview of the development. The impact of information technologies on supply chain management and service innovation is then briefly discussed. Much emphasis is placed on the feasibility, procedures, and critical challenges of implementing WSN in supply chain management innovation. Current and future applications of WSN are also provided, followed by a case study demonstrating the application potentials of WSN for service innovation in the healthcare industry.

Node localization is one of the key technologies in wireless sensor networks. Taking into account the reasons for the hardware and cost, DV-Hop algorithm is wildly used. The main DV-Hop localization error is the distance between unknown nodes and anchor nodes. In this paper, the estimation of average hop-length and RSSI value has been applied to reduce the error of measurement, which is the distance between unknown nodes and anchor nodes. Simulation results show that this localization algorithm is effective, which improves the positioning accuracy.

Over the past decades, hardware and software technologies for wireless sensor networks (WSNs) have significantly progressed, and WSNs are widely used in various areas including Internet of Things (IoT). In general, existing WSNs are mainly used for applications that require delay-tolerance and low-computation due to the poor resources of traditional sensor nodes in WSNs. However, compared to the traditional sensor nodes, today’s devices for WSNs have more powerful resource. Thus, sensor nodes these days not only conduct sensing and transmitting data to servers but also are able to process many operations, so more diverse applications can be applied to WSNs. Especially, many applications using audio data have been proposed because audio is one of the most widely used data types, and many mobile devices already have a built-in microphone. However, many of the applications have a requirement that heavy-operations should be done by a tight deadline, so it is difficult for a single node in WSNs to run relatively heavy applications by itself. In this paper, to overcome this limitation of WSNs, we propose a new emerging system, HeaLow, a cooperative computing system for heavy-computation and low-latency processing in WSNs. We designed HeaLow and carried out the practical implementation on real devices. We confirmed the effectiveness of HeaLow through various experiments using the real devices and simulations. Using HeaLow, nodes in WSNs are able to perform heavy-computation processes while satisfying a completion time requirement.

Recently, the technology of wireless sensor networks (WSNs) experiences a growing use in home automation or advanced industry infrastructure applications. Despite a strong interest of industries in this technology, key issues like miniaturization and security of WSN nodes has not been solved yet. State-of-the-art WSN nodes do not provide credible security nor satisfying configurability and miniaturized implementations. This publication deals with these limitations and presents a WSN node that provides security, configurability, and a miniaturized design. To show the sensor node feasibility, the WSN node is implemented within a smart home demonstrator. Additionally, a miniaturized pre-study WSN node design is presented using the novel embedded wafer level ball grid array (eWLB) packaging technology. Furthermore, an eWLB based WSN node design is proposed that further miniaturize the presented WSN node.

In the field of high-risk observation, the nodes in Wireless Sensor Network (WSN) are distributed randomly. The result from sensing becomes meaningless if it is not known from where the originating node is. Therefore, a sensor node positioning scheme, known as the localization scheme, is required. The localization scheme consists of distance estimation and position computing. Thus, this research used connectivity as distance estimation within range free algorithm DV-Hop and Amorphous, and then trilateral algorithm for computing the position. Besides that, distance estimation using the connectivity between nodes is not needed for the additional hardware ranging as required by a range-based localization scheme. In this research compared the localization algorithm based on range free localization, which are DV-Hop algorithm and Amorphous algorithm. The simulation result shows that the amorphous algorithm have achieved 13.60% and 24.538% lower than dv-hop algorithm for each parameter error localization and energy consumption. On node density variations, dv-hop algorithm gained a localization error that is 26.95% lower than amorphous algorithm, but for energy consumption parameter, amorphous gained 14.227% lower than dv-hop algorithm. In the communication range variation scenario, dv-hop algorithm gained a localization error that is50.282% lower than amorphous. However, for energy consumption parameter, amorphous algorithm gained 12.35%. lower than dv-hop algorithm.

DV-Hop and Centroid-based algorithms are fundamental methods in wireless sensor networks. Nevertheless, they both have disadvantages. In order to utilize these two methods efficiently, a new hybrid range-free localization algorithm which combines the two methods is proposed in this paper. The average localization error rate of this hybrid algorithm is discussed and the algorithm energy consumption is analyzed.

Wide usage of wireless sensor network (WSN) is the reason for development of many routing protocols. Recent advances in WSN observe the increased interest in the potential use in applications like Military, Environmental, Health, Vehicular, Mechanical stress levels on attached objects, disaster management etc. Wireless sensor networks are callously restricted by storage capacity, energy and computing power. So it is essential to design an energy efficient aware protocol in order to augment the network lifetime. WSN also has the influencing features to perform remote communication, it is also shrouded with various loopholes in its precise operation, where majority of the communication issues are raised from deployment of existing standards of routing protocols and algorithm. Sensors are expected to be remotely deployed in unnoticed environments. Routing as one key technologies of wireless sensor network has now become very important research work because the applications of WSN is everywhere, it is impractical that there is a routing protocol suitable for all applications. In this paper, a review on routing protocol in WSNs is carried out which are classified as data-centric, hierarchical and location based depending on the network structure. Then some of the multipath routing protocols which are widely used in WSNs like Multipath Multispeed Protocol (MMSPEED), Braided Multipath Routing Protocol, Energy-Aware Routing to improve network performance are also discussed. Massive research work has already been carried out in past to introduce some of the effective routing protocols to enable robust communication system in WSN. Advantages and disadvantages of each routing algorithm are discussed thereafter. This paper also discusses the critical open issues that are yet to be solved. This paper compares and summarizes the performances of routing protocols.

A three-dimensional (3D) orthogonal frequency division multiplexing (OFDM) system with peak-to-average power ratio (PAPR) reduction method for the wireless sensor networks (WSNs) is presented. The transmit power of wireless nodes in an ad hoc network is strictly limited. Thus, high PAPR of the 3D OFDM system is a possible drawback when it is considered as a physical layer transmission scheme for the WSNs. Here, we propose an improved partial transmit sequence (PTS) technique to reduce PAPR of the OFDM system with 3D modulation formats. In the proposed algorithm, the components of 3D signals are assigned to different subblocks using a diagonal rule (DR), increasing randomness of the signals in the disjoint subblocks forcibly. As a result, the proposed method reduces PAPR of the 3D OFDM system significantly without increase in computational complexity. Hence, the proposed algorithm makes the 3D OFDM system be a possible candidate for a physical layer transmission scheme in future WSNs.

Wireless Sensor Network (WSN) have been attracting increasing interest for supporting a new generation of ubiquitous computing systems with great potential for many applications. However, the communication paradigms in WSNs differ from the ones associated to traditional wireless networks, triggering the need for efficient wireless communication technology. Several wireless technologies have emerged ranging from short and medium distance. Bluetooth, ZigBee and Impulse Radio Ultra Wide Band (IR-UWB) are three popular short range wireless communications. Due to its various features and advantages (especially low power consumption and low complexity), IR-UWB is a very promising wireless communication technology for WSN. In this paper, we evaluate the main features and advantages of this new technology (IR-UWB) for WSN in terms of transmission time, data coding and power consumption compared to Bluetooth and ZigBee. To analyze and evaluate the main features and advantages of IR-UWB as an efficient short range wireless communication technology for WSN, we used MiXiM platform under OMNet++ simulator.

Focusing on the problem of the poor locating performance in original DV-Hop algorithm which is one of the range-free algorithms in wireless sensor network (WSN), an intelligent DV-Hop algorithm for locating nodes was proposed in this paper. Fully considering the effect of dynamic topology, the self-adaptive artificial bee colony (SAABC) algorithm was introduced to estimate the unknown nodes location. Simulation results show that the new algorithm has obviously better locating performance precision and precision stability than DV-Hop algorithm without any additional devices and communication overhead. As a result, it is a more promising locating scheme in WSNs with both random distributing nodes and dynamic topology.

This work presents a solar power based water quality monitoring wireless sensor network (WSN) technology, to screen water quality over various destinations as an ongoing application, an astounding framework engineering comprised by disseminated sensor nodes and a base station is proposed. The model and base station are associated utilizing WSN innovation like Zig-Bee. Modeling and implementation of a proposed model using one node powered by solar cell and WSN technology is the challenging work. Data collection by different sensing element at the node side like pH, turbidity conductivity, saltiness and temperature is sent by means of WSN to the base station. Information gathered from the distant site can be shown in visual organization too as it very well may be examined utilizing diverse reproduction apparatuses at base station. This original framework has benefits like no fossil fuel byproduct, low power utilization, more adaptable to send data at far off site, etc.

Recently, wireless sensor network (WSN) technology has been widely used in various fields such as public safety applications since it provides a wide range of surveillance and monitoring applications with an inexpensive price. In this paper, we investigate the use of wireless sensor network technology for fire detection and rescue system. We propose a framework, which can detect fires promptly and support rescue activities, using wireless sensor devices. Our framework consists of fire detection sensor network, information gathering layer, middleware, and escape support system. We have implemented a test-bed and evaluated the performance of fire detection via experiments.