ARTIFICIAL NEURAL NETWORK (ANN)-BASED PREDICTIVE TOOL FOR ESTIMATING LIGHTNING DAMAGE IN COMPOSITES

Castellated steel beams (CSB) are an attractive option for the steel construction industry thanks to outstanding advantages, such as the ability to exceed large span, lightweight, and allowing flexible arrangement of the technical pipes through beams. In addition, the complex localized and global failures characterizing these structural members have led researchers to focus on the development of efficient design guidelines. This paper aims to propose an artificial neural network (ANN) model with optimal architecture to predict the load‐carrying capacity of CSB with a scheme of the simple beam bearing load located at the center of the beam. The ANN model is built with 9 input variables, which are essential parameters equivalent to the geometrical properties and mechanical properties of the material, such as the overall depth of the castellated beam, the vertical projection of the inclined side of the opening, the web thickness, the flange width, the flange thickness, the width of web post at middepth, the horizontal projection of inclined side of the opening, the minimum web yield stress, and the minimum flange yield stress. The output variable is the load‐carrying capacity of the CSB. With the optimal ANN architecture [9‐1‐1] containing one hidden layer, the performance of the ANN model is evaluated based on statistical criteria such as R2, RMSE, and MAE. The results show that the optimal ANN model is a highly effective predictor of the load‐carrying capacity of the CSB with the best value of R2 = 0.989, RMSE = 3.328, and MAE = 2.620 for the testing part. The ANN model seems to be the best algorithm of machine learning for predicting the CSB load‐carrying capacity.

In this study, a feed-forward backpropagation (FFBP) artificial neural network (ANN) model based on multilayer perceptron (MLP) for computing the pull-in voltage value of fixed–fixed micro-actuators is presented. The proposed ANN model is trained using the numerous pull-in voltage value results of clamped–clamped actuators, which have various physical properties, simulated by a software that employs the finite element method (FEM). As the presented ANN model has been trained for the simulation data, it implicitly takes into account the fringing field, mid-plane stretching and size effects. The accuracy and robustness of the results obtained by the proposed ANN model are verified by comparing with those of the theoretical ones through the simulation and experimental studies previously presented in the literature. The average percentage errors for training and testing data are found to be 0.30 and 0.40 %, respectively, while the maximum percentage error for literature data is calculated as 1.96 %. These results show that the main advantage of the presented ANN model gives satisfying pull-in voltage results over solution space of the simulations with effortless way.

Geopolymer concrete (GPC) offers a potential solution for sustainable construction by utilizing waste materials. However, the production and testing procedures for GPC are quite cumbersome and expensive, which can slow down the development of mix design and the implementation of GPC. The basic characteristics of GPC depend on numerous factors such as type of precursor material, type of alkali activators and their concentration, and liquid to solid (precursor material) ratio. To optimize time and cost, Artificial Neural Network (ANN) can be a lucrative technique for exploring and predicting GPC characteristics. In this study, the compressive strength of fly-ash based GPC with bottom ash as a replacement of fine aggregates, as well as fly ash, is predicted using a machine learning-based ANN model. The data inputs are taken from the literature as well as in-house lab scale testing of GPC. The specifications of GPC specimens act as input features of the ANN model to predict compressive strength as the output, while minimizing error. Fourteen ANN models are designed which differ in backpropagation training algorithm, number of hidden layers, and neurons in each layer. The performance analysis and comparison of these models in terms of mean squared error (MSE) and coefficient of correlation (R) resulted in a Bayesian regularized ANN (BRANN) model for effective prediction of compressive strength of fly-ash and bottom-ash based geopolymer concrete.

این مطالعه به منظور بررسی پیش بینی شاخص های عملکرد تولیدی در مرغان تخم گذار با استفاده از شبکه های عصبی مصنوعی و رگرسیون غیرخطی چندگانه انجام شد. بررسی بر روی اطلاعات چهار دوره متوالی پرورش در یک واحد پرورش مرغ تخم گذار صورت گرفت. روش های داده-کاوی شامل رگرسیون خطی و غیر خطی، شبکه عصبی پرسپترون سه لایه، شبکه عصبی پرسپترون چهار لایه و شبکه عصبی با تابع پایه ای شعاعی بود. در این مدل ها از متغیرهای سن گله، میزان خوراک مصرفی و فصل تولید به عنوان متغیر پیشگو و شاخص های عملکرد تولیدی شامل درصد تخم-گذاری، وزن توده ای تخم مرغ تولیدی و ضریب تبدیل غذایی به عنوان متغیر پاسخ استفاده شد. نتایج نهایی رگرسیون های خطی نشان داد که برای تمامی متغیرهای وابسته مورد مطالعه متغیر مستقل سن گله معنی دار می باشد. بنابراین رگرسیون غیر خطی شاخص های عملکرد تولیدی در مقابل سن برای مقایسه با شبکه های عصبی مختلف مورد بررسی قرار گرفت و برای مقایسه کلیه مدل ها از ضریب تعیین (R2) و میانگین قدر مطلق خطا (MAE) استفاده شد. نتایج نشان داد بین شبکه های عصبی مصنوعی مختلف مورد مطالعه، شبکه با تابع پایه ای شعاعی بهتر از سایر مدل های در پیش‌بینی شاخص های عملکرد تولیدی مرغان تخم گذار عمل می کند.

The power capacity of solar photovoltaics (PVs) in Korea has grown dramatically in recent years, and an accurate estimation of solar resources is crucial for the efficient management of these solar PV systems. Since the number of solar irradiance measurement sites is insufficient for Korea, satellite images can be useful sources for estimating solar irradiance over a wide area of Korea. In this study, an artificial neural network (ANN) model was constructed to calculate hourly global horizontal solar irradiance (GHI) from Korea Communication, Ocean and Meteorological Satellite (COMS) Meteorological Imager (MI) images. Solar position variables and five COMS MI channels were used as inputs for the ANN model. The basic ANN model was determined to have a window size of five for the input satellite images and two hidden layers, with 30 nodes on each hidden layer. After these ANN parameters were determined, the temporal and spatial applicability of the ANN model for solar irradiance mapping was validated. The final ANN ensemble model, which calculated the hourly GHI from 10 independent ANN models, exhibited a correlation coefficient (R) of 0.975 and root mean square error (RMSE) of 54.44 W/m² (12.93%), which were better results than for other remote-sensing based works for Korea. Finally, GHI maps for Korea were generated using the final ANN ensemble model. This COMS-based ANN model can contribute to the efficient estimation of solar resources and the improvement of the operational efficiency of solar PV systems for Korea.

We present an Artificial Neural Network (ANN) model and a new correlation for predicting natural gas density under nanoconfined conditions, accounting for pressure, temperature, fluid composition, pore size, and fluid-solid interaction coefficients. We investigate a five-component, single-phase dry shale-gas system over a broad composition space, generating 7,500 data points using the multicomponent simplified local density (MSLD) method. Gas compositions together with key input parameters – pressure (P), temperature (T), pore size (d), solid-solid interaction energy (ɛss), and solid-solid molecular diameter (σss) are sampled via Latin Hypercube Sampling (LHS) to obtain a space-filling design that covers the full range of each input with far fewer runs than a full factorial design. These data points are divided into 70% for the training set, 15% for the validation set, and 15% for the testing set. The ANN model is then optimized by adjusting key parameters such as the number of hidden layers, the number of neurons per layer, and the choice of training algorithms, among others. The performance of the ANN model is evaluated by comparing its predictions with those of MSLD. An empirical correlation is further developed from the MSLD-generated dataset to provide a simple, explicit, and fast predictive expression suitable for direct implementation in reservoir simulators. The results demonstrate that the ANN model can effectively replace the computationally intensive MSLD calculations, offering a significantly faster alternative without compromising accuracy. The ANN model achieved over 99% prediction accuracy. The fine-tuned ANN model and empirical correlation enable highly accurate predictions while delivering substantial computational savings, making it well-suited for compositional reservoir simulations of hydrocarbon flow in nanopores. To demonstrate the practical applicability of the proposed approach, a compositional reservoir simulation case of CO2 injection into a shale gas system is performed using MSLD, the ANN model, and the developed empirical correlation, enabling a direct comparison of their predictive capability and computational efficiency.

Experimental and theoretical evaluation of thermophysical properties for moist air within solar still by using different algorithms of artificial neural network

Predication of performance and emissions characteristics adual fuel engine energized with liquid and gaseous materials by Artificial neural network

Fused Filament Fabrication (FFF), a process parameters-dependent manufacturing method, currently dominates the additive manufacturing (AM) sector because of its prominent ability to produce parts with intricate profiles, customise products, and minimise waste. Though the effects of FFF process parameters were investigated experimentally, recent research highlighted the importance of developing numerical modelling and computational methods on optimising the FFF printing process and FFF-printed materials. This study aims to investigate the tensile strength (TS) of FFF-printed high-impact polystyrene (HIPS) via devising a systematic testing and analysis framework, which combines experimental testing, representative volume element (RVE)-finite element method (FEM), rule of mixture (ROM), and artificial neural networks (ANN). HIPS samples are fabricated using FFF considering the variations of infill density, layer thickness, nozzle temperature, raster angle, and build orientation, and tested with standard tensile testing. The rule of mixtures (ROM) and its modified version (MROM) are employed to calculate the TS of longitudinally and transversely built samples at various infill densities, respectively, while an ANN model is constructed to investigate the effect of material anisotropy precisely. The optimal ANN architecture is built with five hidden layers with the number of neurons in each layer as 44, 82, 169, 362, and 50. Although both MROM and ANN perform well on the validation set, ANN exhibits superior accuracy with only a maximum error of 0.13% for training set and 11% for validation set. The combination of the RVE-FEM, MROM, and ANN approaches can significantly improve the FFF printing process of polymers for optimisation.

This article presents a theoretical background for an artificial neural network (ANN) model of the alpha type Stirling engine where thermodynamic dependencies, connected with equations of motion for the piston-crankshaft system with three degrees of freedom were taken into account. Because of the highly nonlinear description of Stirling engine dynamics, the ANN was employed, that modelled output power of Stirling engine as a function of the input power, molar mass, load current, pressure obtained by gas combustion and working parameters of the engine. The ANN model was tested on experimental data, gathered at the laboratory stand, in different working conditions. The proposed ANN model provides good results for both training and testing data-sets.

The present study was carried out using artificial neural network (ANN) model for predicting the sodium hazardness, i.e., sodium adsorption ratio (SAR), percent sodium (%Na) residual, Kelly’s ratio (KR), and residual sodium carbonate (RSC) in the groundwater of the Pratapgarh district of Southern Rajasthan, India. This study focuses on verifying the suitability of water for irrigational purpose, wherein more groundwater decline coupled with water quality problems compared to the other areas are observed. The southern part of the Rajasthan State is more populated as compared to the rest of the parts. The southern part of the Rajasthan is more populated as compared to the rest of the Rajasthan, which leads to the industrialization, urbanization, and evolutionary changes in the agricultural production in the southern region. Therefore, it is necessary to propose innovative methods for analyzing and predicting the water quality (WQ) for agricultural use. The study aims to develop an optimized artificial neural network (ANN) model to predict the sodium hazardness of groundwater for irrigation purposes. The ANN model was developed using ‘nntool’ in MATLAB software. The ANN model was trained and validated for ten years (2010–2020) of water quality data. An L-M 3-layer back propagation technique was adopted in ANN architecture to develop a reliable and accurate model for predicting the suitability of groundwater for irrigation. Furthermore, statistical performance indicators, such as RMSE, IA, R, and MBE, were used to check the consistency of ANN prediction results. The developed ANN model, i.e., ANN4 (3-12-1), ANN4 (4-15-1), ANN1 (4-5-1), and ANN4 (3-12-1), were found best suited for SAR, %Na, RSC, and KR water quality indicators for the Pratapgarh district. The performance analysis of the developed model (3-12-1) led to a correlation coefficient = 1, IA = 1, RMS = 0.14, and MBE = 0.0050. Hence, the proposed model provides a satisfactory match to the empirically generated datasets in the observed wells. This development of water quality modeling using an ANN model may help to useful for the planning of sustainable management and groundwater resources with crop suitability plans as per water quality.

Hydraulic jump has numerous applications in the field of hydraulic engineering, such as energy dissipation over spillways, chlorinating of wastewater and many others. The sequent depth ratio is one of the important characteristics of hydraulic jump useful in designing the stilling basin. Despite its importance, the exact value of sequent depth ratio is still undetermined. In the present study an attempt has been made to find out the effects of roughness heights and slopes by conducting an experimental study and artificial neural network (ANN) model. Three different roughness heights of crushed and rounded aggregates and two positive bed slopes were used. The experimental results show that the reductions in sequent depth ratios are more in the case of crushed aggregate (4%–35%) than rounded on the same slope. By increasing bed slope, the sequent depth ratios show increasing trend in the range 3%–45%. The proposed ANN model has the capability to predict the sequent depth ratio with least MAPE (mean absolute percentage error) value 3.15%. Therefore, based on the results obtained from the empirical model and ANN model, it has been concluded that the present study can be better utilized for the estimation of the sequent depth ratio of hydraulic jump.

A prediction on structural stress and deformation of fish cage in waves using machine-learning method

The generalization ability of artificial neural networks (ANNs) and M5 model tree (M5Tree) in modeling reference evapotranspiration (ET 0 ) is investigated in this study. Daily climatic data, average temperature, solar radiation, wind speed, and relative humidity from six different stations operated by California Irrigation Management Information System (CIMIS) located in two different regions of the USA were used in the applications. King-City Oasis Rd., Arroyo Seco, and Salinas North stations are located in San Joaquin region, and San Luis Obispo, Santa Monica, and Santa Barbara stations are located in the Southern region. In the first part of the study, the ANN and M5Tree models were used for estimating ET 0 of six stations and results were compared with the empirical methods. The ANN and M5Tree models were found to be better than the empirical models. In the second part of the study, the ANN and M5Tree models obtained from one station were tested using the data from the other two stations for each region. ANN models performed better than the CIMIS Penman, Hargreaves, Ritchie, and Turc models in two stations while the M5Tree models generally showed better accuracy than the corresponding empirical models in all stations. In the third part of the study, the ANN and M5Tree models were calibrated using three stations located in San Joaquin region and tested using the data from the other three stations located in the Southern region. Four-input ANN and M5Tree models performed better than the CIMIS Penman in only one station while the two-input ANN models were found to be better than the Hargreaves, Ritchie, and Turc models in two stations.

Assessment of performance and exhaust emission quality of different compression ratio engine using two biodiesel mixture: Artificial neural network approach