Experimental and theoretical evaluation of thermophysical properties for moist air within solar still by using different algorithms of artificial neural network

In this study, a feed-forward backpropagation (FFBP) artificial neural network (ANN) model based on multilayer perceptron (MLP) for computing the pull-in voltage value of fixed–fixed micro-actuators is presented. The proposed ANN model is trained using the numerous pull-in voltage value results of clamped–clamped actuators, which have various physical properties, simulated by a software that employs the finite element method (FEM). As the presented ANN model has been trained for the simulation data, it implicitly takes into account the fringing field, mid-plane stretching and size effects. The accuracy and robustness of the results obtained by the proposed ANN model are verified by comparing with those of the theoretical ones through the simulation and experimental studies previously presented in the literature. The average percentage errors for training and testing data are found to be 0.30 and 0.40 %, respectively, while the maximum percentage error for literature data is calculated as 1.96 %. These results show that the main advantage of the presented ANN model gives satisfying pull-in voltage results over solution space of the simulations with effortless way.

Fast and accurate evaluation of the Available Transfer Capability (ATC) is essential for the efficient use of networks in a deregulated power system. This paper proposes multi output Feed Forward neural network for on line estimation of ATC. Back Propagation Algorithm is used to train the Feed Forward neural network. The data sets for developing Artificial Neural Network (ANN) models are generated using Repeated Power Flow (RPF) algorithm. The effectiveness of the proposed ANN models are tested on IEEE 24 bus Reliability Test System (RTS). The results of ANN model is compared with RPF results. From the results, it is observed that the ANN model developed is suitable for fast on line estimation of ATC.

Hydraulic jump has numerous applications in the field of hydraulic engineering, such as energy dissipation over spillways, chlorinating of wastewater and many others. The sequent depth ratio is one of the important characteristics of hydraulic jump useful in designing the stilling basin. Despite its importance, the exact value of sequent depth ratio is still undetermined. In the present study an attempt has been made to find out the effects of roughness heights and slopes by conducting an experimental study and artificial neural network (ANN) model. Three different roughness heights of crushed and rounded aggregates and two positive bed slopes were used. The experimental results show that the reductions in sequent depth ratios are more in the case of crushed aggregate (4%–35%) than rounded on the same slope. By increasing bed slope, the sequent depth ratios show increasing trend in the range 3%–45%. The proposed ANN model has the capability to predict the sequent depth ratio with least MAPE (mean absolute percentage error) value 3.15%. Therefore, based on the results obtained from the empirical model and ANN model, it has been concluded that the present study can be better utilized for the estimation of the sequent depth ratio of hydraulic jump.

A prediction on structural stress and deformation of fish cage in waves using machine-learning method

In this study, three artificial neural network (ANN) models are developed with back propagation (BP) optimization algorithms to predict various lightning damage modes in carbon/epoxy laminates. The proposed ANN models use three input variables associated with lightning waveform parameters (i.e., the peak current amplitude, rising time, and decaying time) to predict fiber damage, matrix damage, and through-thickness damage in the composites. The data used for training and testing the networks was actual lightning damage data collected from peer-reviewed published literature. Various BP training algorithms and network architecture configurations (i.e., data splitting, the number of neurons in a hidden layer, and the number of hidden layers) have been tested to improve the performance of the neural networks. Among the various BP algorithms considered, the Bayesian regularization back propagation (BRBP) showed the overall best performance in lightning damage prediction. When using the BRBP algorithm, as expected, the greater the fraction of the collected data that is allocated to the training dataset, the better the network is trained. In addition, the optimal ANN architecture was found to have a single hidden layer with 20 neurons. The ANN models proposed in this work may prove useful in preliminary assessments of lightning damage and reduce the number of expensive experimental lightning tests.

The generalization ability of artificial neural networks (ANNs) and M5 model tree (M5Tree) in modeling reference evapotranspiration (ET 0 ) is investigated in this study. Daily climatic data, average temperature, solar radiation, wind speed, and relative humidity from six different stations operated by California Irrigation Management Information System (CIMIS) located in two different regions of the USA were used in the applications. King-City Oasis Rd., Arroyo Seco, and Salinas North stations are located in San Joaquin region, and San Luis Obispo, Santa Monica, and Santa Barbara stations are located in the Southern region. In the first part of the study, the ANN and M5Tree models were used for estimating ET 0 of six stations and results were compared with the empirical methods. The ANN and M5Tree models were found to be better than the empirical models. In the second part of the study, the ANN and M5Tree models obtained from one station were tested using the data from the other two stations for each region. ANN models performed better than the CIMIS Penman, Hargreaves, Ritchie, and Turc models in two stations while the M5Tree models generally showed better accuracy than the corresponding empirical models in all stations. In the third part of the study, the ANN and M5Tree models were calibrated using three stations located in San Joaquin region and tested using the data from the other three stations located in the Southern region. Four-input ANN and M5Tree models performed better than the CIMIS Penman in only one station while the two-input ANN models were found to be better than the Hargreaves, Ritchie, and Turc models in two stations.

Monthly river flow forecasting using artificial neural network and support vector regression models coupled with wavelet transform

The present study was carried out using artificial neural network (ANN) model for predicting the sodium hazardness, i.e., sodium adsorption ratio (SAR), percent sodium (%Na) residual, Kelly’s ratio (KR), and residual sodium carbonate (RSC) in the groundwater of the Pratapgarh district of Southern Rajasthan, India. This study focuses on verifying the suitability of water for irrigational purpose, wherein more groundwater decline coupled with water quality problems compared to the other areas are observed. The southern part of the Rajasthan State is more populated as compared to the rest of the parts. The southern part of the Rajasthan is more populated as compared to the rest of the Rajasthan, which leads to the industrialization, urbanization, and evolutionary changes in the agricultural production in the southern region. Therefore, it is necessary to propose innovative methods for analyzing and predicting the water quality (WQ) for agricultural use. The study aims to develop an optimized artificial neural network (ANN) model to predict the sodium hazardness of groundwater for irrigation purposes. The ANN model was developed using ‘nntool’ in MATLAB software. The ANN model was trained and validated for ten years (2010–2020) of water quality data. An L-M 3-layer back propagation technique was adopted in ANN architecture to develop a reliable and accurate model for predicting the suitability of groundwater for irrigation. Furthermore, statistical performance indicators, such as RMSE, IA, R, and MBE, were used to check the consistency of ANN prediction results. The developed ANN model, i.e., ANN4 (3-12-1), ANN4 (4-15-1), ANN1 (4-5-1), and ANN4 (3-12-1), were found best suited for SAR, %Na, RSC, and KR water quality indicators for the Pratapgarh district. The performance analysis of the developed model (3-12-1) led to a correlation coefficient = 1, IA = 1, RMS = 0.14, and MBE = 0.0050. Hence, the proposed model provides a satisfactory match to the empirically generated datasets in the observed wells. This development of water quality modeling using an ANN model may help to useful for the planning of sustainable management and groundwater resources with crop suitability plans as per water quality.

This article presents a theoretical background for an artificial neural network (ANN) model of the alpha type Stirling engine where thermodynamic dependencies, connected with equations of motion for the piston-crankshaft system with three degrees of freedom were taken into account. Because of the highly nonlinear description of Stirling engine dynamics, the ANN was employed, that modelled output power of Stirling engine as a function of the input power, molar mass, load current, pressure obtained by gas combustion and working parameters of the engine. The ANN model was tested on experimental data, gathered at the laboratory stand, in different working conditions. The proposed ANN model provides good results for both training and testing data-sets.

In this research work, we developed a mathematical model of a digital currency market, involving daily closing price as a function of time. We proposed the Artificial Neural Network (ANN) model. We observed that our ANN model was able to predict the daily closing price of Bitcoin and also make six weeks forecast to a reasonable degree of accuracy. We equally observe that the time dependent ANN model can actually give digital currency traders and investors a clue on when to trade off their digital assets with minimum risk. We therefore, recommend that ANN model should be incorporated into digital currency trading platforms as a signal tool to enable digital currency traders take more informed and less risky trading decisions. From our findings, we would advise traders who wish to employ ANN model to consider a smaller time frame say a few weeks’ time interval for their predictions. We observed also that ANN models have limitations when it comes to manual computation or implementation in Microsoft Excel, especially when dealing with very large input values. This is because of the saturation characteristic of our ANN inner layer activation function (viz; tanh function) which can lead to identical output values for different input values, making it difficult to replicate the ANN model's behavior. Furthermore, ANN models often involve complex interactions between multiple neurons, layers, and activation functions, which can be challenging to replicate manually.

BackgroundThis study aimed to develop an artificial neural network (ANN) model for predicting synchronous organ-specific metastasis in lung cancer (LC) patients.MethodsA total of 62,151 patients who diagnosed as LC without data missing between 2010 and 2015 were identified from Surveillance, Epidemiology, and End Results (SEER) program. The ANN model was trained and tested on an 75/25 split of the dataset. The receiver operating characteristic (ROC) curves, area under the curve (AUC) and sensitivity were used to evaluate and compare the ANN model with the random forest model.ResultsFor distant metastasis in the whole cohort, the ANN model had metrics AUC = 0.759, accuracy = 0.669, sensitivity = 0.906, and specificity = 0.613, which was better than the random forest model. For organ-specific metastasis in the cohort with distant metastasis, the sensitivity in bone metastasis, brain metastasis and liver metastasis were 0.913, 0.906 and 0.925, respectively. The most important variable was separate tumor nodules with 100% importance. The second important variable was visceral pleural invasion for distant metastasis, while histology for organ-specific metastasis.ConclusionsOur study developed a “two-step” ANN model for predicting synchronous organ-specific metastasis in LC patients. This ANN model may provide clinicians with more personalized clinical decisions, contribute to rationalize metastasis screening, and reduce the burden on patients and the health care system.

Estimation of hydraulic jump on corrugated bed using artificial neural networks and genetic programming

The purpose of this study was to validate the use of artificial neural network (ANN) models for predicting quality of life (QOL) after breast cancer surgery and to compare the predictive capability of ANNs with that of linear regression (LR) models. The European Organization for Research and Treatment of Cancer Quality of Life Questionnaire and its supplementary breast cancer measure were completed by 402 breast cancer patients at baseline and at 2 years postoperatively. The accuracy of the system models were evaluated in terms of mean square error (MSE) and mean absolute percentage error (MAPE). A global sensitivity analysis was also performed to assess the relative significance of input parameters in the system model and to rank the variables in order of importance. Compared to the LR model, the ANN model generally had smaller MSE and MAPE values in both the training and testing datasets. Most ANN models had MAPE values ranging from 4.70 to 19.96 %, and most had high prediction accuracy. The ANN model also outperformed the LR model in terms of prediction accuracy. According to global sensitivity analysis, pre-operative functional status was the best predictor of QOL after surgery. Compared with the conventional LR model, the ANN model in the study was more accurate for predicting patient-reported QOL and had higher overall performance indices. Further refinements are expected to obtain sufficient performance improvements for its routine use in clinical practice as an adjunctive decision-making tool.

The field capacity (FC) and permanent wilting point (PWP) are fundamental hydrological properties critical for assessing water availability within soils, rather than direct measures of soil health. Due to the challenges associated with their field measurement, alternative assessment methods are necessary. In this study, global-scale accessible soil data were retrieved from the world soil database called the World Soil Information Service (WoSIS), and artificial neural network (ANN) and gene-expression programming (GEP) algorithms were used to predict soil FC and PWP based on easily obtainable parameters from the database. The best-fit variable combination for FC (longitude, latitude, altitude, sand content, silt content, clay content, and electrical conductivity) and PWP (best-fit FC combination plus pH) modeling was determined. Both ANN and GEP showed greater accuracy than linear-based models in simulating the FC and PWP from the best-fit variables. The mean absolute error (MAE) was reduced by 51.54% for the FC and 56.38% for the PWP by the ANN model, compared with the linear model used in the previous literature. The normalized root mean square error (NRMSE) evaluation indicated that the ANN model performed best for PWP prediction (NRMSE of 19.9%), while the GEP model was superior for FC prediction (NRMSE of 29.9%). Between the ANN and GEP models, the ANN model showed a slightly higher model of interpretability; however, the GEP model exhibited a similar or better ability to avoid large error, based on the error distribution. Overall, our results demonstrated that machine learning is effective in predicting the FC and PWP from easily accessible data from WoSIS, and the GEP model is more preferable for FC and PWP modeling.

Micellar enhanced ultrafiltration (MEUF) of mercury-contaminated wastewater: Experimental and artificial neural network modeling