Multi-output On-Line ATC Estimation in Deregulated Power System Using ANN

Multivariate regression (MVR) and different artificial neural network (ANN) models developed for optical transparency of conductive polymer nanocomposite films

Experimental and theoretical evaluation of thermophysical properties for moist air within solar still by using different algorithms of artificial neural network

The present study was carried out using artificial neural network (ANN) model for predicting the sodium hazardness, i.e., sodium adsorption ratio (SAR), percent sodium (%Na) residual, Kelly’s ratio (KR), and residual sodium carbonate (RSC) in the groundwater of the Pratapgarh district of Southern Rajasthan, India. This study focuses on verifying the suitability of water for irrigational purpose, wherein more groundwater decline coupled with water quality problems compared to the other areas are observed. The southern part of the Rajasthan State is more populated as compared to the rest of the parts. The southern part of the Rajasthan is more populated as compared to the rest of the Rajasthan, which leads to the industrialization, urbanization, and evolutionary changes in the agricultural production in the southern region. Therefore, it is necessary to propose innovative methods for analyzing and predicting the water quality (WQ) for agricultural use. The study aims to develop an optimized artificial neural network (ANN) model to predict the sodium hazardness of groundwater for irrigation purposes. The ANN model was developed using ‘nntool’ in MATLAB software. The ANN model was trained and validated for ten years (2010–2020) of water quality data. An L-M 3-layer back propagation technique was adopted in ANN architecture to develop a reliable and accurate model for predicting the suitability of groundwater for irrigation. Furthermore, statistical performance indicators, such as RMSE, IA, R, and MBE, were used to check the consistency of ANN prediction results. The developed ANN model, i.e., ANN4 (3-12-1), ANN4 (4-15-1), ANN1 (4-5-1), and ANN4 (3-12-1), were found best suited for SAR, %Na, RSC, and KR water quality indicators for the Pratapgarh district. The performance analysis of the developed model (3-12-1) led to a correlation coefficient = 1, IA = 1, RMS = 0.14, and MBE = 0.0050. Hence, the proposed model provides a satisfactory match to the empirically generated datasets in the observed wells. This development of water quality modeling using an ANN model may help to useful for the planning of sustainable management and groundwater resources with crop suitability plans as per water quality.

In this research work, we developed a mathematical model of a digital currency market, involving daily closing price as a function of time. We proposed the Artificial Neural Network (ANN) model. We observed that our ANN model was able to predict the daily closing price of Bitcoin and also make six weeks forecast to a reasonable degree of accuracy. We equally observe that the time dependent ANN model can actually give digital currency traders and investors a clue on when to trade off their digital assets with minimum risk. We therefore, recommend that ANN model should be incorporated into digital currency trading platforms as a signal tool to enable digital currency traders take more informed and less risky trading decisions. From our findings, we would advise traders who wish to employ ANN model to consider a smaller time frame say a few weeks’ time interval for their predictions. We observed also that ANN models have limitations when it comes to manual computation or implementation in Microsoft Excel, especially when dealing with very large input values. This is because of the saturation characteristic of our ANN inner layer activation function (viz; tanh function) which can lead to identical output values for different input values, making it difficult to replicate the ANN model's behavior. Furthermore, ANN models often involve complex interactions between multiple neurons, layers, and activation functions, which can be challenging to replicate manually.

Monthly river flow forecasting using artificial neural network and support vector regression models coupled with wavelet transform

According to the thought of intelligent forecasting and hybrid forecasting, an Intelligent Hybrid (IH) model for short-term traffic flow forecasting was presented. The IH model had three sub-models: History Mean (HM) model, Artificial Neural Network (ANN) model and the Fuzzy Combination (FC) model. By means of the good static stabilization character of HM method, the HM model predicted the traffic flow by the Single Exponential Smoothing method based on the historical traffic data. Otherwise, the ANN model was a 1.5-layer feed-forward neural network built by some common S-function neurons. Because of the strong dynamic nonlinear mapping ability of ANN, the ANN model can estimate the actual traffic flow in a very precise and satisfactory sense. The FC model mixed the two individual forecasting results by fuzzy logic and its output was regarded as the final forecasting of the traffic flow. Factual application results show that the IH model, which takes advantage of the unique strength of the HM model and the ANN model, can produce more precise forecasting than that of two individual models. Thus, the IH model can be an efficient method to the short-term traffic flow forecasting.

The present investigation introduces a robust soft computing model by comparing twelve least square support vector machine (LSSVM), six long short-term memory (LSTM), and thirty-six artificial neural network (ANN) models to predict the unconfined compressive strength (UCS) of fine-grained soil. For that purpose, a database of fine content, dry unit weight, porosity, void ratio, degree of saturation, and specific gravity results of 85 soil specimens has been compiled from the literature. 75 and 10 soil specimens were trained and tested for each model. Six training databases have been prepared to analyze the effect of quality and quantity of training database by selecting 50%, 60%, 70%, 80%, 90%, and 100% of 75 soil specimens. The performance comparison demonstrated that the LSTM model (MD 113) requires fewer training datasets (50% of 75) than the LSSVM (MD 102 and MD 108) and ANN (MD 120, MD 127, MD 136, MD139, MD 148, and MD 150) models. Also, it was observed that the nonlinear LSSVM model (MD 108) is unaffected by multicollinearity in training datasets and predicted UCS better than the linear LSSVM model (MD 102). Furthermore, the Levenberg-Marquardt neural network model (MD 120) has outperformed the other ANN models with the root mean square error (RMSE) of 5.1214 N/cm2, the mean absolute error (MAE) of 4.1379 N/cm2, and correlation (R) of 0.9836. The overall performance comparison revealed that the LSTM model is more potent than the LSSVM and ANN models. The LSTM model predicted the UCS of fine-grained soil with the RMSE of 4.7539 N/cm2, the MAE of 4.2461 N/cm2, and R of 0.9880. Conversely, cosine amplitude sensitivity analysis demonstrated that the fine content and dry unit weight influence the prediction of virgin UCS of fine-grained soils.

In this paper, four artificial neural network (ANN) models [i.e., feed-forward neural network (FFNN), function fitting neural network (FITNET), cascade-forward neural network (CFNN) and generalized regression neural network] have been developed for atomic coordinate prediction of carbon nanotubes (CNTs). The research reported in this study has two primary objectives: (1) to develop ANN prediction models that calculate atomic coordinates of CNTs instead of using any simulation software and (2) to use results of the ANN models as an initial value of atomic coordinates for reducing number of iterations in calculation process. The dataset consisting of 10,721 data samples was created by combining the atomic coordinates of elements and chiral vectors using BIOVIA Materials Studio CASTEP (CASTEP) software. All prediction models yield very low mean squared normalized error and mean absolute error rates. Multiple correlation coefficient (R) results of FITNET, FFNN and CFNN models are close to 1. Compared with CASTEP, calculation times decrease from days to minutes. It would seem possible to predict CNTs’ atomic coordinates using ANN models can be successfully used instead of mathematical calculations.

The prediction of spall response of reinforced concrete members like columns and slabs have been attempted by earlier researchers with analytical solutions, as well as with empirical models developed from data generated from physical or numerical experiments, with different degrees of success. In this article, compared to the empirical models, more versatile and accurate models are developed based on model-free approach of artificial neural network (ANN). Synthetic data extracted from the results of numerical experiments from literature have been utilized for the purpose of training and testing of the ANN models. For two concrete members, namely, slabs and columns, different sets of ANN models were developed, each of which proved to have definite advantages over the corresponding empirical model reported in literature. In case of slabs, for all three categories of spall, the ANN model results were superior to the empirical models as evaluated by the various performance metrics, such as correlation, root mean square error, mean absolute error, maximum overestimation and maximum underestimation. The ANN models for each category of column spall could handle three variables together: namely, depth, spacing of longitudinal and transverse reinforcement, as contrasted to the empirical models that handled one variable at a time, and at the same time yielded comparable performance. The application of the ANN models for spall prediction of concrete slabs and columns developed in this study has been discussed along with their limitations.

BackgroundThis study aimed to develop an artificial neural network (ANN) model for predicting synchronous organ-specific metastasis in lung cancer (LC) patients.MethodsA total of 62,151 patients who diagnosed as LC without data missing between 2010 and 2015 were identified from Surveillance, Epidemiology, and End Results (SEER) program. The ANN model was trained and tested on an 75/25 split of the dataset. The receiver operating characteristic (ROC) curves, area under the curve (AUC) and sensitivity were used to evaluate and compare the ANN model with the random forest model.ResultsFor distant metastasis in the whole cohort, the ANN model had metrics AUC = 0.759, accuracy = 0.669, sensitivity = 0.906, and specificity = 0.613, which was better than the random forest model. For organ-specific metastasis in the cohort with distant metastasis, the sensitivity in bone metastasis, brain metastasis and liver metastasis were 0.913, 0.906 and 0.925, respectively. The most important variable was separate tumor nodules with 100% importance. The second important variable was visceral pleural invasion for distant metastasis, while histology for organ-specific metastasis.ConclusionsOur study developed a “two-step” ANN model for predicting synchronous organ-specific metastasis in LC patients. This ANN model may provide clinicians with more personalized clinical decisions, contribute to rationalize metastasis screening, and reduce the burden on patients and the health care system.

The purpose of this study was to validate the use of artificial neural network (ANN) models for predicting quality of life (QOL) after breast cancer surgery and to compare the predictive capability of ANNs with that of linear regression (LR) models. The European Organization for Research and Treatment of Cancer Quality of Life Questionnaire and its supplementary breast cancer measure were completed by 402 breast cancer patients at baseline and at 2 years postoperatively. The accuracy of the system models were evaluated in terms of mean square error (MSE) and mean absolute percentage error (MAPE). A global sensitivity analysis was also performed to assess the relative significance of input parameters in the system model and to rank the variables in order of importance. Compared to the LR model, the ANN model generally had smaller MSE and MAPE values in both the training and testing datasets. Most ANN models had MAPE values ranging from 4.70 to 19.96 %, and most had high prediction accuracy. The ANN model also outperformed the LR model in terms of prediction accuracy. According to global sensitivity analysis, pre-operative functional status was the best predictor of QOL after surgery. Compared with the conventional LR model, the ANN model in the study was more accurate for predicting patient-reported QOL and had higher overall performance indices. Further refinements are expected to obtain sufficient performance improvements for its routine use in clinical practice as an adjunctive decision-making tool.

To differentiate pleomorphic adenoma (PA) and adenoid cystic carcinoma (ACC) on fine needle aspiration cytology (FNAC) is often challenging to cytologists. In the present study, we tried to make an artificial neural network (ANN) model from the FNAC smears to differentiate PA from ACC. The detailed cytomorphological features were analysed on the FNAC of histopathology proven cases of PA (n = 35) and ACC (n = 33) and enumerated semi-quantitatively by two independent observers. These data were used to make an ANN model to distinguish PA from ACC on FNAC material. We used neuro-intelligence software to build the ANN model. The network architecture was 10-2-1. The heuristic search engine was applied to have this model. We used backpropagation neural network to teach ANN. At least 500 iterations were done to train the model. The efficacy of this ANN model was assessed with the help of the confusion matrix and receiver operating characteristic curve. The data were separated automatically by the software as a training set (n = 48), validation set (n = 10) and test set (n = 10). The ANN model was able to differentiate every case (10/10) of PA and ACC in the final test set. The area under the receiver operating characteristic curve was 1. The currently built ANN model is competent to identify PA and ACC cases on FNAC. Additional parameters and new cases can be incorporated into this open-ended ANN model to make it more robust.

In the deregulated power systems, the available transfer capability (ATC) should be known for secure and reliable operation. ATC mainly depends on load for a particular transaction. Due to complex nature of load, it is better if the ATC estimator is able to handle this complex nature. This paper presents fully complex-valued radial basis function (FC-RBF) neural network approach for ATC estimation for bilateral transaction under normal condition. The training patterns for neural network are generated using differential evolution algorithm (DEA). The important feature of the proposed method is the use of input reduction techniques to improve the performance of the developed network. Differential evolution feature selection (DEFS) technique is proposed to reduce the complexity and training time of neural network. The proposed method is tested on IEEE 118 bus system, and results are compared with DEA and repeated power flow (RPF) results. The test results show that the proposed method reduces the training time and it is suitable for online application.

Performance of radial basis and LM-feed forward artificial neural networks for predicting daily watershed runoff

The power capacity of solar photovoltaics (PVs) in Korea has grown dramatically in recent years, and an accurate estimation of solar resources is crucial for the efficient management of these solar PV systems. Since the number of solar irradiance measurement sites is insufficient for Korea, satellite images can be useful sources for estimating solar irradiance over a wide area of Korea. In this study, an artificial neural network (ANN) model was constructed to calculate hourly global horizontal solar irradiance (GHI) from Korea Communication, Ocean and Meteorological Satellite (COMS) Meteorological Imager (MI) images. Solar position variables and five COMS MI channels were used as inputs for the ANN model. The basic ANN model was determined to have a window size of five for the input satellite images and two hidden layers, with 30 nodes on each hidden layer. After these ANN parameters were determined, the temporal and spatial applicability of the ANN model for solar irradiance mapping was validated. The final ANN ensemble model, which calculated the hourly GHI from 10 independent ANN models, exhibited a correlation coefficient (R) of 0.975 and root mean square error (RMSE) of 54.44 W/m² (12.93%), which were better results than for other remote-sensing based works for Korea. Finally, GHI maps for Korea were generated using the final ANN ensemble model. This COMS-based ANN model can contribute to the efficient estimation of solar resources and the improvement of the operational efficiency of solar PV systems for Korea.