Authentication Protocol for Intelligent Electronic Devices in an Edge IoT Environment with Key Agreement

The environmental impacts that are associated with the interconnected sensor devices in the Internet of Things (IoT) network are minimized with the utilization of green communication. This is because, when the IoT devices tend to grow, the IoT system becomes more prone to issues regarding the utilization of resources, sustainability, and energy consumption within the communication system. Tuning the communication protocols, lowering the IoT device’s energy usage rate, and establishing an effective technique for the transmission of data are performed. This is achieved by the green communication technique, which aids in the establishment of significant energy savings in the IoT network. For devices with limited power sources, the green communication technology offers an extended battery life. Despite the enormous potential of IoT technology, a number of obstacles need to be overcome, including those related to load balancing, security, storage, privacy, energy management, and device heterogeneity. In response to the challenges posed by conventional models, an innovative solution for the selection of Cluster Head (CH) using a hybrid approach is devised here. The energy consumption of sensor nodes is influenced by various factors, such asCH load, temperature, distance, residual energy, the number of alive nodes, delay, and so on. To address these challenges in IoT networks, a hybrid approach that combines the Squid Game Optimizer (SGO) and the Artificial Gorilla Troops Optimizer (AGTO) for the optimal selection of CH is suggested. The implemented approach is named Hybrid Squid Game with Artificial Gorilla Troops Optimizer (HSG-AGTO). This approach aims to optimize the above-mentioned factors and overcome energy consumption challenges in IoT networks. The effectiveness of the model is validated, and the results demonstrate the superior performance of the suggested model.

In the wireless Internet of Things (IoT) networks with resource-constrained devices, fog computing has been introduced to deal with the computation-intensive applications at the edges of the networks. While fog computing decreases the computation delay and fronthaul traffic data, it also brings the severe challenge on complex resource allocation of the available computation and communication resources under the stringent quality of service (QoS) requirements. In this paper, we investigate the problem of tasks scheduling and heterogeneous resource allocation for multiple devices in the wireless IoT networks. The IoT devices that collect a massive amount of data need to make proper offloading decision to transfer the data to the fog computing nodes (FNs). Moreover, to support a massive number of device connections and transfer a huge amount of data with low latency and limited resource, we consider the deployment of non-orthogonal multiple access (NOMA) in IoT networks, which enables multiple IoT devices to simultaneously transmit data to the same FN at the same time, frequency, and code domain. We jointly optimize the allocation of resource blocks and transmit power of multiple IoT devices, subject to the respective QoS requirements. Furthermore, the optimization problem is formulated as a mixed-integer nonlinear programming problem to minimize the system energy consumption. Since it is an NP-hard problem, we introduce an improved genetic algorithm (IGA) to solve it. The simulation results show that the proposed scheme achieves good performance in throughput, delay, outage probability, and energy consumption.

Comparative study of IoT forensic frameworks

Lightweight devices are widely used in the Internet of Things (IoT), Due to the limited computation and communication resources, lightweight devices can only conduct simple actions and will thereby hinder the intelligent cooperation of the devices in IoT. Such situation will last long since currently it is hard to replace all lightweight devices with intelligent ones. To address this issue and improve the integrated intelligence of IoT, we propose an augmented digital twin empowered intelligence for lightweight devices in IoT. The augmented digital twin, or shorten as augmented twin (AT), is a virtual entity built for a given lightweight device, which can be constructed on some resource-rich devices such as a gateway or an edge server. Based on the resources in its carrier, AT can not only clone all functions of the lightweight device, but also extend some intelligent analysis and cooperation abilities for this device. We first propose the architecture of AT for lightweight device in IoT. Then, to achieve the most effective AT carrier selection of the lightweight device, we formulate an optimization problem and present a self-initialized genetic algorithm to solve this problem. Simulations are conducted to evaluate the cost in constructing the ATs of the lightweight devices, as well as the performance promotion when AT is used in an IoT network. Compared to the benchmark schemes, AT can decrease the scheduling latency and energy consumption by 60.38% and 32.16% respectively than normal digital twin with reasonable constructing cost.

Cognitive radio (CR) is considered as a key enabling communication technology that offers efficient wireless connectivity to Internet of Things (IoT) devices. Its integration with the future 5G architecture is expected to advance the IoT paradigm. Security attacks can severely degrade the performance of such CR‐based IoT (CRIoT) networks. The effect of security attacks can be reduced by implementing defensive approaches. However, such solutions come at the expense of degrading spectrum efficiency and consuming more network resources. In this paper, we investigate the spectrum sharing and access problem in a multidevice single‐transceiver CRIoT network with time‐critical applications under jamming attacks. Our main goal is to maximize the number of simultaneously served IoT devices over all available idle channels while ensuring delay requirement, hardware, link quality, security attacks, and spectrum utilization constraints. This problem is formulated as a total unimodular binary linear programming, which is shown to be solvable in polynomial time. Unlike most of previous security‐aware channel assignment solutions that conduct the channel assignment sequentially, our solution simultaneously provides secured distributed channel‐assignment decisions for multiple CRIoT links (batching method). Batching can be realized through an admission control stage for CR IoT devices to announce their control packets. Simulation results reveal that our solution significantly improves network performance compared to previous security‐aware schemes.

Background. With the proliferation of Internet of Things (IoT) networks in the digital age, the risk of cyberattacks, especially DDoS attacks, is also increasing. IoT devices such as smart refrigerators, thermostats, webcams and other Internet-connected home appliances are being targeted by attackers who can use them as part of a botnet to conduct DDoS attacks. These devices often have inadequate network security and are rarely updated, making them vulnerable. DDoS attacks can result in significant losses such as lost revenue, reputational damage and costs to restore services. So, the vulnerability of IoT networks to DDoS attacks and the need to develop effective protection measures is a pressing issue. Objective. The purpose of the paper is to analyse software that supports DDoS attacks in IoT networks. Provide general recommendations to help improve approaches to defence measures in IoT networks against DDoS-enabled malware. Methods. Five main DDoS attack models are considered: agent-handler model, reflexive model, IRC-based model, web-based model, and P2P-based model. Three most dangerous software capable of DDoS attacks on IoT networks are analyzed: Mirai, XOR.DDoS and Linux.Hydra. Results. There are many models and methods of DDoS attacks on IoT networks. The most dangerous are Mirai, XOR.DDoS and Linux.Hydra. Each of these software has its own specific characteristics and methods of carrying out attacks. The study also showed that there are several effective measures to counter these attacks, including setting strong passwords, regularly updating software, setting up traffic filters and restricting network access. Conclusions. Key aspects of DDoS attacks, their models and process steps are considered. The paper focuses on the three most dangerous software used to conduct such attacks and provides recommendations on how to counteract them.

The cell-free (CF) network architecture has promising applications in Internet of Things (IoT) networks due to its dynamic and adaptive nature in resource allocation. However, due to the openness of wireless channels and the information interaction of sensitive data, the security issues of CF IoT networks have become more severe, especially in the case of powerful opponents. In this article, a high-level secure transmission technique is utilized to protect the privacy of users, which is called covert communication. Specifically, in the CF IoT network conceived, one IoT device secretly transmits sensitive information to an access point (AP) under the cover of a selected jammer to avoid being detected by other curious IoT devices, which are regarded as potential eavesdroppers (Eves) and determined by the central processing unit (CPU) based on greedy degree. Then, we analyze the joint impact of jamming and greedy degree on the detection error probability (DEP) for Eve, and determine Eve’s minimum DEP as well as the corresponding optimal threshold. To enhance energy efficiency while ensuring communication security, three jamming scheduling schemes have been proposed, namely, the jamming scheduling for both the receiver (Bob) and Eve (JSBE), the jamming scheduling for Eve (JSE), and the jamming scheduling for Bob (JSB). Numerical results indicate that greedy degree dominates the average minimum DEP for Eve when IoT devices tend to be lightweight. Furthermore, JSBE scheme demonstrates superiority in terms of covert rate, covert outage probability (COP), and covert energy efficiency (CEE), which provides an effective solution for high-security transmission of energy-constrained nodes in CF IoT networks.

The massive growth in the popularity of Internet of Things (IoT) and hence expansion in the number of IoT devices has led to network control issues. The heterogeneity observed in the generated data from each device has further contributed to latency delays and network traffic concerns. An integral part of current network research encompasses the monitoring of network activities, device identification, and secure exchange of information between different devices. The recognition and administration of these persistently increasing IoT devices have posed major challenges in various fields of their application, like Cyber-Physical Systems (CPSs). Hence, the management of network traffic flow between these devices has become a concerning issue. The prolonged inconsistency in cybersecurity systems and constrained computational capabilities have further made IoT devices more vulnerable to adversarial threats. To this end, the preservation and administration of network activities become crucial to manage. In this chapter, we address the network traffic administration issue for different IoT devices. We focus on the efficient characterization of inter-arrival rates of data generated from IoT devices for packet-level and flow-level analysis. Thus, making identification and management of IoT devices exceedingly significant for securing stable functioning of network activities. We also discuss some influential works conjectured to IoT devices and network analysis. The empirical results obtained from real-world network flows have been reported to provide a precise understanding of our observations. Finally, the strengths and weaknesses of some state-of-the-art technologies are discussed along with relevant future scopes.KeywordsInternet of Things (IoT)Network traffic analysisCyber-Physical System (CPS)IoT devicesFlow controlDevice identification

The rapid proliferation of Internet of Things (IoT) devices has ushered in a new era of connectivity and data exchange, revolutionizing various industries. However, the inherent vulnerabilities in traditional centralized transaction systems pose significant security challenges, particularly when dealing with sensitive data generated by IoT devices. This paper introduces an ICAA (Integrity Consensus Authorization Algorithm) for securing transaction records over the IoT network by leveraging Decentralized Distributed Ledger Technology (DDL), integrating the PICA (Proof-of-Integrity Consensus Algorithm) and CTAP (Context-Aware Transaction Authorization Protocol). The proposed system addresses the limitations of centralized architectures by employing a decentralized ledger, ensuring transparency, immutability, and tamper-resistant transaction records. The Proof-of-Integrity Consensus Algorithm enhances the security of the network by validating and confirming transactions based on the integrity of the data stored in the distributed ledger. This consensus mechanism minimizes the risk of fraudulent activities and unauthorized modifications, making it well-suited for the dynamic and distributed nature of IoT environments. Furthermore, the integration of the Context-Aware Transaction Authorization Protocol enhances the adaptability of the system to the diverse contexts in which IoT devices operate. The synergy between the Proof-of-Integrity Consensus Algorithm and the Context-Aware Transaction Authorization Protocol creates a comprehensive and secure framework for managing transaction records in IoT networks. . The proposed HGGC is 5.026% better than the ECMQV-MAC, 0.4215% better than QKD, and 0.0843% better than OTP in the nodes 200. The proposed model contributes to the establishment of a trustworthy and resilient infrastructure for the IoT, laying the foundation for secure and transparent transactions in the connected world.

Optimizing beamforming in IoT-WET: A symbiotic-based approach under imperfect channel state information

Internet of Things (IoT) networks are being designed to connect billions of sensors/devices for an application-specific environment to provide services and carry out special tasks. It enables the virtual connection of the real-world physical devices with Internet cyberspace. While, there is an exponentially growing trend in the use of IoT technology for diverse applications such as smart agriculture, smart industries, smart hospitals, smart homes, etc., there are pressing design issues which affect the IoT network performance in the long run, for example, replacement of batteries for increasing the lifetime of devices to maintain the network longevity. To tackle this challenge, various wireless powered-based energy transfer paradigms were proposed over time. Backscatter communication (BackCom) is likewise one of the energy-efficient solutions proposed, which can satisfy the stringent green communication aspects of IoT networks. To achieve massive connectivity in BackCom-enabled IoT network, selecting a suitable multiple access scheme is also a crucial part. Most multiple access schemes proposed for BackCom systems are based on frequency or timeslots sharing techniques. Multiple access techniques proposed for BackCom IoT system can reap the gain of non-orthogonal multiple access (NOMA) principle. In NOMA, multiple end nodes (ENs) of sensors network is served in the same resource block, thereby, increasing the spectrum efficiency of BackCom IoT system. In this chapter, we discuss the prospects of backscatter technique with application of NOMA for green communication in IoT network.

A fuzzy based Co-Operative Blackmailing Attack detection scheme for Edge Computing nodes in MANET-IOT environment

Internet of Things (IoT) have opened the door to a world of unlimited possibilities for implementations in varied sectors in society, but it also has many challenges. One of those challenges is security and privacy. IoT devices are more susceptible to security threats and attacks. Due to constraints of the IoT devices such as area, power, memory, etc., there is a lack of security solutions that are compatible with IoT devices and applications, which is leading this world of securely connected things to the “internet of insecure things.” A promising solution to this problem is going beyond the standard or classical techniques to implementing the security solutions in the hardware of the IoT device. The integration of emerging technologies in IoT networks, such as machine learning, blockchain, fog/edge/cloud computing, and quantum computing have added more vulnerable points in the network. This paper introduces a comprehensive study on IoT security threats and solutions. Additionally, this survey outlines how emerging technologies such as machine learning and blockchain are integrated in IoT, challenges resulted from this integration, and potential solutions to these challenges. The paper utilizes the 4-layer IoT architecture as a reference to identify security issues with corresponding solutions.

With the growth of wireless network technology-based devices, identifying the communication behaviour of wireless connectivity enabled devices, e.g. Internet of Things (IoT) devices, is one of the vital aspects, in managing and securing IoT networks. Initially, devices use frames to connect to the access point on the local area network and then, use packets of typical communication protocols through the access point to communicate over the Internet. Toward this goal, network packet and IEEE 802.11 media access control (MAC) frame analysis may assist in managing IoT networks efficiently, and allow investigation of inclusive behaviour of IoT devices. This paper presents network traffic traces data of D-Link IoT devices from packet and frame levels. Data collection experiment has been conducted in the Network Systems and Signal Processing (NSSP) laboratory at Universiti Brunei Darussalam (UBD). All the required devices, such as IoT devices, workstation, smartphone, laptop, USB Ethernet adapter, and USB WiFi adapter, have been configured accordingly, to capture and store network traffic traces of the 14 IoT devices in the laboratory. These IoT devices were from the same manufacture (D-Link) with different types, such as camera, home-hub, door-window sensor, and smart-plug.

In recent years, Internet of Things (IoT) networks have been received much attention due to their intelligence and automation. Numerous devices are deployed in the networks, and many applications are willing to obtain the distribution of IoT devices in one range for data analysis. However, some distributions of IoT devices include sensitive information which may disclose the privacy of their owners. And most IoT devices cannot afford heavy computation because of their low computing power and limited storage capacity. In this paper, we propose a privacy-preserving and efficient scheme that satisfies local differential privacy and supports O(1) -time-complexity range counting query which can find the number of IoT devices in a range. It also allows IoT devices to join or exit dynamically. Finally, theoretical analysis proves that our scheme satisfies local differential privacy, and our experiments show that our range counting query scheme can get the microsecond level.