- Research Article
- 10.13182/nt76-a31589
Authors
- Jun 01, 1976
- Nuclear Technology
- R.J Teitel + 50 more +50
Authors
Authors
Authors
Authors
Authors
Authors
Authors
Authors
Authors
Click to increase image sizeClick to decrease image size Additional informationNotes on contributorsCharles W. BagnalCharles W. Bagnal Jr. (BS, nuclear engineering, Georgia Institute of Technology, 1980) is a consulting engineer at GRP Consulting, Inc., currently engaged in reactor physics methods development and nuclear engineering support services. He has been involved in nuclear reactor design analysis and software development for six years. His experience includes advanced light water reactor (LWR) and heavy water reactor designs, including extended burnup fuel cycles using gadolinia burnable poison.Gerard P. CavanaughGerard P. Cavanaugh (BS, physics, Massachusetts Institute of Technology, 1969; MS, 1970, and PhD, 1976, nuclear engineering, University of Illinois, Urbana-Champaign) worked from 1973 to 1975 in the Neutronics Physics Division at Oak Ridge National Laboratory. He is currently supervisor of radiation physics and criticality analysis at Combustion Engineering, Inc. (C-E). His primary technical interests are in the areas of radiation transport, stochastic sampling methodologies, and computer applications ranging from mainframes to personal computers.Robert P. HarrisRobert P. Harris (BS, 1974, and MS, 1975, nuclear engineering, and MS, 1984, metallurgy, Rensselaer Polytechnic Institute) has worked in the core design, safety analysis, and licensing of C-E pressurized water reactors since 1973. He is currently involved in the neutronic design of advanced burnable poisons and fuel assemblies. He consults in the areas of core fuel management, safety analysis, and startup physics testing.Regis A. MatzieRegis A. Matzie (BS, physics, U.S. Naval Academy, 1965; MS, 1971, and PhD, 1976, nuclear engineering, Stanford University) is currently the manager of analog plants in the nuclear engineering department at C-E. His current technical interests include advanced LWR designs, methods of improving fuel utilization and fuel cycle costs in current design LWRs, and alternate fuel cycles for advanced converter reactors.Laszlo B. TarkoLaszlo B. Tarko (BS, physics, University of Connecticut, 1980) is currently the lead engineer in the radiation physics group at C-E. His current technical interests include radiation transport, ex-core radiation physics, dose rates, energy deposition, and associated computer techniques.Howard OckenHoward Ocken (D. Eng., metallurgy, Yale University, 1966) is a project manager in the Nuclear Power Division of the Electric Power Research Institute. He has managed projects that addressed materials performance in nuclear core components. His current interests include materials aspects associated with reducing radiation fields, especially replacing cobalt sources and decontamination and preconditioning technology.Per Hedemann JensenPer Hedemann Jensen (BSc, electronic engineering, Technical University, Aarhus, Denmark, 1970) is a senior health physicist at Ris0 National Laboratory, where he is head of the Section for Applied Health Physics. He has been involved in studies of radiological consequences from hypothetical core-melt accidents at nuclear power plants. His current technical interest is experimental work on internal dosimetry problems.Ian J. HastingsIan J. Hastings (PhD, metallurgical science, University of Queensland, 1968) is head of the Fuel Properties and Behaviour Group in the Fuel Materials Branch at the Chalk River Nuclear Laboratories (CRNL) of Atomic Energy of Canada Limited. His current interests are in oxide fuel behavior under irradiation, particularly release of short-lived fission products under normal and accident conditions, and in fusion ceramics.Elio MizzanElio Mizzan (BA Sc, chemical engineering, University of Toronto, 1949) is a supervisor at the Fuel Materials Branch Hot Cell Facility at CRNL. His interests have been in the areas of postirradiation examination of reactor fuels and materials, particularly postdefect handling of spent U02 fuel.Alan M. RossAlan M. Ross (BSc, general, University of London, 1953) is a supervisor at the Recycle Fuel Fabrication Laboratories of the Fuel Materials Branch of CRNL. His interests include the fabrication, nondestructive assay, properties, irradiation behavior, and neutron radiography of current and advanced thermal reactor fuels.John R. KelmJohn R. Kelm is a research technician in the Fuel Materials Branch at CRNL. His research responsibility is the operation of a special project hot cell. His current interest is U02 oxidation and stress corrosion cracking.Real J. ChenierReal J. Chenier is a research technician in the Fuel Materials Branch at CRNL. His current research responsibility is operation of the postirradiation metallographic facilities.D. H. RoseD. H. Rose is a research technologist in the Fuel Properties and Behaviour Group of the Fuel Materials Branch at CRNL. His current responsibility is fabrication and operation of instrumented in-reactor experiments.J. NovakJ. Novak (BASc, engineering science, University of Toronto, 1974) is employed in Central Nuclear Services, Nuclear Generation Division of Ontario Hydro. Since 1976 he has been engaged in the areas of nuclear fuel production and development. His current technical interests include behavior of irradiated fuel in air, U02 powder characteristics, and fuel performance improvement.Claudio RonchiClaudio Ronchi (Dr. rer. nat. phys., State University, Milan, Italy, 1965) is a research officer at the Joint Research Centre (JRC) of the Commission of European Communities. After having worked in the research and development of advanced fuels for fast breeders, he is now engaged in reactor safety studies.Jacques van de LaarJacques van de Laar (Ingenieur Fysische Techniek, H.T.S., Heerlen, The Netherlands, 1974) works in thec mathematical modeling department of JRC-Karlsruhe. He is currently involved in the development and execution of computer programs for reactor fuel performance and safety analysis.Hubert BlankHubert Blank (PhD, metal physics, Technical University of Stuttgart, 1957), head of the Physics Division of the European Institute for Transuranium Elements, Karlsruhe, has directed the “Swelling of Advanced Fuels” project at this institute since 1973.Tetsuo FukasawaTetsuo Fukasawa (BS, 1976; MS, 1978; and Dr. Eng., 1981, nuclear engineering, Tohoku University) is a researcher in the Energy Research Laboratory (ERL), Hitachi, Ltd. He has specialized in the radiochemistry of actinide elements and is currently working in the field of low-level radioactive waste treatment and spent fuel reprocessing.Koichi ChinoKoichi Chino (BS, 1972, and MS, 1974, mechanical engineering, Tokyo Institute of Technology) is a researcher at ERL. His primary areas of interest are transport phenomena and radioactive waste management.Osamu KuriyamaOsamu Kuriyama (BS, 1973, and MS, 1975, Tohoku University) is a researcher at ERL. His current interests include the radioactive waste management and chemistry of nuclear waste.Fumio KawamuraFumio Kawamura (BS, chemical engineering, Gunma University,1970; MS, 1972, and Dr. Eng., 1976, Tohoku University) is a researcher at ERL where he is involved in radioactive waste management and reactor water chemistry.Hideo YusaHideo Yusa (BS, physics, Tohoku University, 1959; Dr. Eng., Osaka University, 1969) is a chief researcher at ERL. He is responsible for the research and development of radioactive waste management systems.Bernard L. CohenBernard L. Cohen (BS, Case Institute of Technology, 1944; MS, University of Pittsburgh, 1948; DSc, Carnegie Institute of Technology, 1950) did basic research on nuclear structure using accelerators at Oak Ridge National Laboratory from 1950 to 1958 and at the University of Pittsburgh until the mid-1970s. He then turned his research efforts to the environmental impacts of energy generation, including studies of radioactive waste, health effects of radiation, risk and risk aversion, radon problems, and reactor safety. He is a professor of physics at the University of Pittsburgh and a former director (1965 to 1978) of its Scaife Nuclear Laboratories.K. TasakaK. Tasaka (PhD, nuclear engineering, University of Tokyo, 1976) first worked in breeder reactor safety and fission product characteristics research for ten years and in light water reactor (LWR) safety research for nine years at the Japan Atomic Energy Research Institute (JAERI). He is the project leader of the Rig of Safety Assessment (ROSA) program, and his current interests include analysis of thermal-hydraulic behavior during a loss-of-coolant accident (LOCA) and an anticipated transient without scram in LWRs.M. SuzukiM. Suzuki (MS, mechanical engineering, Kyoto University, 1971) has worked for the ROSA program since 1974. His current interests include safety evaluation of an LWR.Y. AnodaY. Anoda (PhD, mechanical engineering, University of Tokyo, 1979) is a research engineer for the ROSA program. His current interests include two-phase flow during a LOCA.Y. KoizumiY. Koizumi (PhD, mechanical engineering, University of Tokyo, 1977) is a research engineer for the ROSA program. His current interests include analysis of thermal-hydraulic behavior during a LOCA with emphasis on two-phase flow characteristics and heat transfer.T. YonomotoT. Yonomoto (MS, nuclear engineering, University of Osaka, 1982) is a research engineer for the ROSA program. His current interests include analysis of thermal-hydraulic behavior during a LOCA.H. KumamaruH. Kumamaru (PhD, nuclear engineering, University of Tokyo, 1980) is a research engineer for the ROSA program. His current interests include core heat transfer under LOCA conditions.H. NakamuraH. Nakamura (MS, crystalline material engineering, Nagoya University, 1981) is a research engineer for the ROSA program. His current interests include analysis of thermal-hydraulic behavior during a LOCA.M. ShibaM. Shiba (MS, mechanical engineering, Waseda University, 1959) is the general manager of Reactor Safety Laboratory 1 at JAERI. He has worked for 22 years at JAERI in the field of reactor engineering and safety and is currently responsible for simulated LOCA experiments.Genichi MatsumotoGenichi Matsumoto (BS, physics, Tokyo University, 1946) has been an associate professor of nuclear engineering at Nagoya University from 1963 to the present, where he is responsible for research and education in nuclear reactor engineering. He worked as a member of the Scientific Research Institute of Tokyo following his graduation from Tokyo University, and from 1950 to 1963, he served on the technical staff of the Research Reactor Operation Division of the Japan Atomic Energy Research Institute. His current research field includes nuclear safety, neutron radiography (especially neutron television technology), and heat pipe technology.Soichi DoiSoichi Doi (BS, 1976, and MS, 1978, nuclear engineering, Nagoya University) has been employed by the Mitsubishi Atomic Power Industry Co. since 1978, where he is responsible for the nuclear fuel engineering of light water reactors.Kohei OhkuboKohei Ohkubo (BS, mechanical engineering, Aichi Institute of Technology, 1975) is a staff member of Nagoya University.Yasushi IkedaYasushi Ikeda (BS, physics, 1963, and PhD, nuclear engineering, 1982, Nagoya University) has been an assistant staff member of Nagoya University from 1964 to the present. He has investigated thermodynamics of nuclear materials using mass spectrometric technology; neutron radiography technology is also included in his research interests.Günther HesselGünther Hessel [BS, physics, Technical University Dresden, German Democratic Republic (GDR), 1970] is a research scientist at the Central Institute of Nuclear Research (CIN), Rossendorf. He is involved in experimental investigations and developments for technical diagnosis, especially at nuclear power plants.Hans-Erich KöppenHans-Erich Köppen (BS, computer science, Technical University Dresden, 1973) is a research scientist at the CIN. His area of expertise is microprocessor hard- and software and the construction of autonomously working monitors.Peter LiewersPeter Liewers (BS, physics, University of Halle, GDR, 1957; PhD, physics, University of Leipzig, GDR, 1962) is the scientific leader of the group for reactor diagnostics at the CIN. His interests and activities have shifted from reactor physics to technical diagnostics.Peter SchumannPeter Schumann (BS, nuclear engineering, Technical University Dresden, 1963; PhD, physics, Bergakademie Freiberg, GDR, 1970) is a staff scientist at the CIN where he is concerned with digital signal processing and computer software. Formerly he worked in the field of in-core measuring techniques and neutron spectrometryFrank-Peter WeiβFrank-Peter Weiβ (BS, physics, Technical University Dresden, 1973) is a research scientist in the group for technical diagnostics at the CIN. His current interest is the application of statistical pattern recognition to technical diagnostics.
Read moreAuthors
Authors
Heat transfer from a totally blocked fuel subassembly of a liquid metal fast breeder reactor: II. Numerical simulation
Heat transfer from a totally blocked fuel subassembly of a liquid metal fast breeder reactor: II. Numerical simulation
A mathematical model design for Pu content analyzed by 244Cm in spent fuel of fast reactors
Pyroprocessing is employed in the reprocessing of integral fast reactors (IFR). According to China?s domestic regulations of nuclear material control, analysis of the content of uranium (U) and plutonium (Pu) should be carried out during the interval from unloading spent fuel to its transition into pyroprocessing. Non-Destructive Analysis (NDA) is a common technique to analyze the content of U/Pu in spent fuel. However, due to the high radioactivity of spent fuel from fast reactors, the complexity of the signal characteristics and the weak signal from Pu, it is difficult to apply conventional NDA techniques directly. The article studies the reaction principle between 244Cm and Pu, which provides a theoretical basis for new NDA methods to indirectly measure the content of U/Pu through 244Cm. A model based on the one speed neutron-diffusion equation, which selects burnup (BU), cooling time (CT), initial enrichment of uranium (IE) and the mass of 244Cm to characterize the physical properties of the spent fuel, is established and validated in the article. Then, the liquid metal fast breeder reactors are simulated to obtain the information of plutonium and curium of 336 groups under different BU/CT/IE, and the nonlinear multivariate regression model of Pu content with respect to the BU/CT/IE and 244Cm content is obtained by using the nonlinear multiple regression analysis, and R2 is greater than 0.99.
Read moreArgonne Liquid-Metal Advanced Burner Reactor : components and in-vessel system thermal-hydraulic research and testing experience - pathway forward.
This white paper provides an overview and status report of the thermal-hydraulic nuclear research and development, both experimental and computational, conducted predominantly at Argonne National Laboratory. Argonne from the early 1970s through the early 1990s was the Department of Energy's (DOE's) lead lab for thermal-hydraulic development of Liquid Metal Reactors (LMRs). During the 1970s and into the mid-1980s, Argonne conducted thermal-hydraulic studies and experiments on individual reactor components supporting the Experimental Breeder Reactor-II (EBR-II), Fast Flux Test Facility (FFTF), and the Clinch River Breeder Reactor (CRBR). From the mid-1980s and into the early 1990s, Argonne conducted studies on phenomena related to forced- and natural-convection thermal buoyancy in complete in-vessel models of the General Electric (GE) Prototype Reactor Inherently Safe Module (PRISM) and Rockwell International (RI) Sodium Advanced Fast Reactor (SAFR). These two reactor initiatives involved Argonne working closely with U.S. industry and DOE. This paper describes the very important impact of thermal hydraulics dominated by thermal buoyancy forces on reactor global operation and on the behavior/performance of individual components during postulated off-normal accident events with low flow. Utilizing Argonne's LMR expertise and design knowledge is vital to the further development of safe, reliable, and high-performance LMRs. Argonne believes there remains an important need for continued research and development on thermal-hydraulic design in support of DOE's and the international community's renewed thrust for developing and demonstrating the Global Nuclear Energy Partnership (GNEP) reactor(s) and the associated Argonne Liquid Metal-Advanced Burner Reactor (LM-ABR). This white paper highlights that further understanding is needed regarding reactor design under coolant low-flow events. These safety-related events are associated with the transition from normal high-flow operation to natural circulation. Low-flow coolant events are the most difficult to design for because they involve the most complex thermal-hydraulic behavior induced by the dominance of thermal-buoyancy forces acting on the coolants. Such behavior can cause multiple-component flow interaction phenomena, which are not adequately understood or appreciated by reactor designers as to their impact on reactor performance and safety. Since the early 1990s, when DOE canceled the U.S. Liquid Metal Fast Breeder Reactor (LMFBR) program, little has been done experimentally to further understand the importance of the complex thermal-buoyancy phenomena and their impact on reactor design or to improve the ability of three-dimensional (3-D) transient computational fluid dynamics (CFD) and structures codes to model the phenomena. An improved experimental data base and the associated improved validated codes would provide needed design tools to the reactor community. The improved codes would also facilitate scale-up from small-scale testing to prototype size and would facilitate comparing performance of one reactor/component design with another. The codes would also have relevance to the design and safety of water-cooled reactors. To accomplish the preceding, it is proposed to establish a national GNEP-LMR research and development center at Argonne having as its foundation state-of-art science-based infrastructure consisting of: (a) thermal-hydraulic experimental capabilities for conducting both water and sodium testing of individual reactor components and complete reactor in-vessel models and (b) a computational modeling development and validation capability that is strongly interfaced with the experimental facilities. The proposed center would greatly advance capabilities for reactor development by establishing the validity of high-fidelity (i.e., close to first principles) models and tools. Such tools could be used directly for reactor design or for qualifying/tuning of lower-fidelity models, which now require costly experimental qualification for each different type of design application. Capabilities required to establish and operate this center are found primarily in Argonne's Nuclear Engineering and Mathematics and Computer Science Divisions. Funding for the center would be sought from DOE-NE (GNEP/Advanced Burner Reactor and Generation IV programs), DOE-SC/ASCR, and the commercial nuclear industry. Having the above experimental and modeling capabilities at Argonne would constitute a national/international center of excellence for conducting the research and engineering and design tool development needed to support the DOE GNEP/ LM-ABR initiative in developing safe, high-performance reactors.
Read moreThe U.S. fast reactor materials and structures program
Materials and structures problems are central to many critical issues concerning the economic competitiveness, reliable performance, and safety of liquid metal fast breeder reactor (LMFBR) power plants.
Read moreHALEU Decontamination Investigations for EBR-II Recovered Uranium. HALEU Drip Casting Results in the Fuel Conditioning Facility Cathode Processor
Many of the new advanced reactor designs being proposed by the nuclear private sector require uranium fuel enriched between 5 and 20%, otherwise known as High Assay Low Enriched Uranium (HALEU), to support their designs. There are currently no commercial facilities based in the United States which have the capability to produce this material, and as a result the nuclear industry has requested support from the Department of Energy (DOE) to meet this need. One approach being considered by DOE to respond to this demand is to recover highly enriched uranium from used nuclear fuels and downblend it to enrichments less than 20 % U-235. DOE’s past research related to liquid metal fast breeder reactors resulted in the irradiation of more than 3 metric tons (MT) of nuclear fuel composed of highly enriched metallic uranium which resides at the Idaho National Laboratory (INL). This inventory of used nuclear fuel is currently being conditioned using an electrometallurgical treatment process (EMT) to facilitate its eventual disposition to a geologic repository. As part of this treatment process, the highly enriched component of this used fuel is separated, recovered, downblended to <20% U-235, and stored as a metallic uranium ingot. The majority of this fuel was irradiated in the Experimental Breeder Reactor II (EBR-II) over the course of its 30 years of operation. This sodium cooled fast reactor utilized a core composed of highly enriched, sodium-bonded, metallic fuel to sustain or “drive” the reactor. This EBR-II driver fuel is currently being treated for sodium neutralization in the Fuel Conditioning Facility (FCF) at the Materials and Fuels Complex (MFC) and the metallic uranium recovered as a component of this process has been proposed as a potential source of supply of high assay low enriched uranium. The irradiation of the metallic uranium fuel results in the creation of fission products and some minor actinides which are not compatible with many reuse scenario’s, and introduces significant challenges associated with fabrication of new fuel elements using this material. However, it is believed that the current EMT process can be slightly enhanced to address these concerns and result in the recovery of a product that can be considered as a source of supply for HALEU applications. Based on this, DOE requested the INL research methods to enhance the EMT process to produce a recovered uranium material that has a lower contaminant level and lower radiological dose rate and could be utilized in glovebox based fuel fabrication scenarios. The report that follows documents the progress toward meeting this goal.
Read moreProtection against local core accidents in liquid metal fast breeder reactors
Protection against local core accidents in liquid metal fast breeder reactors
Chapter 2 - Electromagnetic pump and LMFBR concept
Chapter 2 - Electromagnetic pump and LMFBR concept
ФУНДАМЕНТАЛЬНЫЕ ИССЛЕДОВАНИЯ В ОБЛАСТИ ТЕПЛОФИЗИКИ ЯЭУ: ДОСТИГНУТЫЕ РЕЗУЛЬТАТЫ И ПРОБЛЕМЫ ДАЛЬНЕЙШИХ ИССЛЕДОВАНИЙ
The results of experimental and theoretical calculations of fundamental research in the field of hydrodynamics, heat transfer, physical chemistry and nuclear power technology cooled by water and liquid metal coolants are analyzed, problems and tasks of further research are formulated. The effects and physical phenomena, laws and characteristics for a wide range of processes occurring in the first and second circuits of reactor facilities, including the flow part, the core, the heating equipment, the means of monitoring and cleaning coolants from impurities as applied to watercooled thermal neutron reactors, fast liquid metal reactors, fusion plants, etc. Particular attention in the field of hydrodynamics and heat transfer is given to studies of the heat transfer crisis in watercooled reactors, hydrodynamics of collector systems, stratification and mixing of jets, vibroacoustics, turbulent transfer in complex channels, heat transfer in the channels and assemblies of fast reactor fuel elements, contact thermal resistance, boiling in large volume and bundles of fuel rods, condensation of liquid metals. In the field of physical chemistry and the technology of liquid metal coolants, the types of impurities and the sources of their entry into the coolants for various nuclear power plants, the characteristics of the mass and heat transfer processes in the circuits and equipment of reactor facilities with liquid metal coolants (sodium, potassium, lithium, lead, bismuth lead), the efficiency of using various purification devices (cold and hot traps) and monitoring the state of impurities in coolants are analyzed.Problem questions and suggestions for further research are formulated. Information is given on the key thermophysical problems of basic research in relation to the development of innovative nuclear energy technologies: water-cooled reactors with supercritical water pressure, high-temperature fast reactors with sodium coolant for hydrogen production, thermonuclear installations, nuclear power plants with liquid-metal space coolants.
Read moreSpatial Effects in Transfer-Function Measurements of Large Nuclear Reactor Power Systems
The importance of spatial effects in proposed transfer-function measurements in large, fast reactors was investigated. A general theoretical formulation of space-dependent transfer-functions is derived which includes the effects of input and output device spatial characteristics. A quantitative indication of spatial effects is given by numerical simulation of measured transfer-functions in a Liquid Metal Fast Breeder Reactor (LMFBR). An approximate method of solution using the Galerlkin's procedure was developed in conjunction with the investigation.
Read moreInvestigation of molten fuel coolant interaction phenomena using real time X-ray imaging of simulated woods metal-water system
Investigation of molten fuel coolant interaction phenomena using real time X-ray imaging of simulated woods metal-water system
Read more