- Research Article
- 10.13182/nt79-a32269
Authors
- Aug 01, 1979
- Nuclear Technology
- H.I Avci + 19 more +19
Authors
Authors
Authors
Authors
Authors
Authors
Authors
Authors
Authors
Click to increase image sizeClick to decrease image size Additional informationNotes on contributorsCharles W. BagnalCharles W. Bagnal Jr. (BS, nuclear engineering, Georgia Institute of Technology, 1980) is a consulting engineer at GRP Consulting, Inc., currently engaged in reactor physics methods development and nuclear engineering support services. He has been involved in nuclear reactor design analysis and software development for six years. His experience includes advanced light water reactor (LWR) and heavy water reactor designs, including extended burnup fuel cycles using gadolinia burnable poison.Gerard P. CavanaughGerard P. Cavanaugh (BS, physics, Massachusetts Institute of Technology, 1969; MS, 1970, and PhD, 1976, nuclear engineering, University of Illinois, Urbana-Champaign) worked from 1973 to 1975 in the Neutronics Physics Division at Oak Ridge National Laboratory. He is currently supervisor of radiation physics and criticality analysis at Combustion Engineering, Inc. (C-E). His primary technical interests are in the areas of radiation transport, stochastic sampling methodologies, and computer applications ranging from mainframes to personal computers.Robert P. HarrisRobert P. Harris (BS, 1974, and MS, 1975, nuclear engineering, and MS, 1984, metallurgy, Rensselaer Polytechnic Institute) has worked in the core design, safety analysis, and licensing of C-E pressurized water reactors since 1973. He is currently involved in the neutronic design of advanced burnable poisons and fuel assemblies. He consults in the areas of core fuel management, safety analysis, and startup physics testing.Regis A. MatzieRegis A. Matzie (BS, physics, U.S. Naval Academy, 1965; MS, 1971, and PhD, 1976, nuclear engineering, Stanford University) is currently the manager of analog plants in the nuclear engineering department at C-E. His current technical interests include advanced LWR designs, methods of improving fuel utilization and fuel cycle costs in current design LWRs, and alternate fuel cycles for advanced converter reactors.Laszlo B. TarkoLaszlo B. Tarko (BS, physics, University of Connecticut, 1980) is currently the lead engineer in the radiation physics group at C-E. His current technical interests include radiation transport, ex-core radiation physics, dose rates, energy deposition, and associated computer techniques.Howard OckenHoward Ocken (D. Eng., metallurgy, Yale University, 1966) is a project manager in the Nuclear Power Division of the Electric Power Research Institute. He has managed projects that addressed materials performance in nuclear core components. His current interests include materials aspects associated with reducing radiation fields, especially replacing cobalt sources and decontamination and preconditioning technology.Per Hedemann JensenPer Hedemann Jensen (BSc, electronic engineering, Technical University, Aarhus, Denmark, 1970) is a senior health physicist at Ris0 National Laboratory, where he is head of the Section for Applied Health Physics. He has been involved in studies of radiological consequences from hypothetical core-melt accidents at nuclear power plants. His current technical interest is experimental work on internal dosimetry problems.Ian J. HastingsIan J. Hastings (PhD, metallurgical science, University of Queensland, 1968) is head of the Fuel Properties and Behaviour Group in the Fuel Materials Branch at the Chalk River Nuclear Laboratories (CRNL) of Atomic Energy of Canada Limited. His current interests are in oxide fuel behavior under irradiation, particularly release of short-lived fission products under normal and accident conditions, and in fusion ceramics.Elio MizzanElio Mizzan (BA Sc, chemical engineering, University of Toronto, 1949) is a supervisor at the Fuel Materials Branch Hot Cell Facility at CRNL. His interests have been in the areas of postirradiation examination of reactor fuels and materials, particularly postdefect handling of spent U02 fuel.Alan M. RossAlan M. Ross (BSc, general, University of London, 1953) is a supervisor at the Recycle Fuel Fabrication Laboratories of the Fuel Materials Branch of CRNL. His interests include the fabrication, nondestructive assay, properties, irradiation behavior, and neutron radiography of current and advanced thermal reactor fuels.John R. KelmJohn R. Kelm is a research technician in the Fuel Materials Branch at CRNL. His research responsibility is the operation of a special project hot cell. His current interest is U02 oxidation and stress corrosion cracking.Real J. ChenierReal J. Chenier is a research technician in the Fuel Materials Branch at CRNL. His current research responsibility is operation of the postirradiation metallographic facilities.D. H. RoseD. H. Rose is a research technologist in the Fuel Properties and Behaviour Group of the Fuel Materials Branch at CRNL. His current responsibility is fabrication and operation of instrumented in-reactor experiments.J. NovakJ. Novak (BASc, engineering science, University of Toronto, 1974) is employed in Central Nuclear Services, Nuclear Generation Division of Ontario Hydro. Since 1976 he has been engaged in the areas of nuclear fuel production and development. His current technical interests include behavior of irradiated fuel in air, U02 powder characteristics, and fuel performance improvement.Claudio RonchiClaudio Ronchi (Dr. rer. nat. phys., State University, Milan, Italy, 1965) is a research officer at the Joint Research Centre (JRC) of the Commission of European Communities. After having worked in the research and development of advanced fuels for fast breeders, he is now engaged in reactor safety studies.Jacques van de LaarJacques van de Laar (Ingenieur Fysische Techniek, H.T.S., Heerlen, The Netherlands, 1974) works in thec mathematical modeling department of JRC-Karlsruhe. He is currently involved in the development and execution of computer programs for reactor fuel performance and safety analysis.Hubert BlankHubert Blank (PhD, metal physics, Technical University of Stuttgart, 1957), head of the Physics Division of the European Institute for Transuranium Elements, Karlsruhe, has directed the “Swelling of Advanced Fuels” project at this institute since 1973.Tetsuo FukasawaTetsuo Fukasawa (BS, 1976; MS, 1978; and Dr. Eng., 1981, nuclear engineering, Tohoku University) is a researcher in the Energy Research Laboratory (ERL), Hitachi, Ltd. He has specialized in the radiochemistry of actinide elements and is currently working in the field of low-level radioactive waste treatment and spent fuel reprocessing.Koichi ChinoKoichi Chino (BS, 1972, and MS, 1974, mechanical engineering, Tokyo Institute of Technology) is a researcher at ERL. His primary areas of interest are transport phenomena and radioactive waste management.Osamu KuriyamaOsamu Kuriyama (BS, 1973, and MS, 1975, Tohoku University) is a researcher at ERL. His current interests include the radioactive waste management and chemistry of nuclear waste.Fumio KawamuraFumio Kawamura (BS, chemical engineering, Gunma University,1970; MS, 1972, and Dr. Eng., 1976, Tohoku University) is a researcher at ERL where he is involved in radioactive waste management and reactor water chemistry.Hideo YusaHideo Yusa (BS, physics, Tohoku University, 1959; Dr. Eng., Osaka University, 1969) is a chief researcher at ERL. He is responsible for the research and development of radioactive waste management systems.Bernard L. CohenBernard L. Cohen (BS, Case Institute of Technology, 1944; MS, University of Pittsburgh, 1948; DSc, Carnegie Institute of Technology, 1950) did basic research on nuclear structure using accelerators at Oak Ridge National Laboratory from 1950 to 1958 and at the University of Pittsburgh until the mid-1970s. He then turned his research efforts to the environmental impacts of energy generation, including studies of radioactive waste, health effects of radiation, risk and risk aversion, radon problems, and reactor safety. He is a professor of physics at the University of Pittsburgh and a former director (1965 to 1978) of its Scaife Nuclear Laboratories.K. TasakaK. Tasaka (PhD, nuclear engineering, University of Tokyo, 1976) first worked in breeder reactor safety and fission product characteristics research for ten years and in light water reactor (LWR) safety research for nine years at the Japan Atomic Energy Research Institute (JAERI). He is the project leader of the Rig of Safety Assessment (ROSA) program, and his current interests include analysis of thermal-hydraulic behavior during a loss-of-coolant accident (LOCA) and an anticipated transient without scram in LWRs.M. SuzukiM. Suzuki (MS, mechanical engineering, Kyoto University, 1971) has worked for the ROSA program since 1974. His current interests include safety evaluation of an LWR.Y. AnodaY. Anoda (PhD, mechanical engineering, University of Tokyo, 1979) is a research engineer for the ROSA program. His current interests include two-phase flow during a LOCA.Y. KoizumiY. Koizumi (PhD, mechanical engineering, University of Tokyo, 1977) is a research engineer for the ROSA program. His current interests include analysis of thermal-hydraulic behavior during a LOCA with emphasis on two-phase flow characteristics and heat transfer.T. YonomotoT. Yonomoto (MS, nuclear engineering, University of Osaka, 1982) is a research engineer for the ROSA program. His current interests include analysis of thermal-hydraulic behavior during a LOCA.H. KumamaruH. Kumamaru (PhD, nuclear engineering, University of Tokyo, 1980) is a research engineer for the ROSA program. His current interests include core heat transfer under LOCA conditions.H. NakamuraH. Nakamura (MS, crystalline material engineering, Nagoya University, 1981) is a research engineer for the ROSA program. His current interests include analysis of thermal-hydraulic behavior during a LOCA.M. ShibaM. Shiba (MS, mechanical engineering, Waseda University, 1959) is the general manager of Reactor Safety Laboratory 1 at JAERI. He has worked for 22 years at JAERI in the field of reactor engineering and safety and is currently responsible for simulated LOCA experiments.Genichi MatsumotoGenichi Matsumoto (BS, physics, Tokyo University, 1946) has been an associate professor of nuclear engineering at Nagoya University from 1963 to the present, where he is responsible for research and education in nuclear reactor engineering. He worked as a member of the Scientific Research Institute of Tokyo following his graduation from Tokyo University, and from 1950 to 1963, he served on the technical staff of the Research Reactor Operation Division of the Japan Atomic Energy Research Institute. His current research field includes nuclear safety, neutron radiography (especially neutron television technology), and heat pipe technology.Soichi DoiSoichi Doi (BS, 1976, and MS, 1978, nuclear engineering, Nagoya University) has been employed by the Mitsubishi Atomic Power Industry Co. since 1978, where he is responsible for the nuclear fuel engineering of light water reactors.Kohei OhkuboKohei Ohkubo (BS, mechanical engineering, Aichi Institute of Technology, 1975) is a staff member of Nagoya University.Yasushi IkedaYasushi Ikeda (BS, physics, 1963, and PhD, nuclear engineering, 1982, Nagoya University) has been an assistant staff member of Nagoya University from 1964 to the present. He has investigated thermodynamics of nuclear materials using mass spectrometric technology; neutron radiography technology is also included in his research interests.Günther HesselGünther Hessel [BS, physics, Technical University Dresden, German Democratic Republic (GDR), 1970] is a research scientist at the Central Institute of Nuclear Research (CIN), Rossendorf. He is involved in experimental investigations and developments for technical diagnosis, especially at nuclear power plants.Hans-Erich KöppenHans-Erich Köppen (BS, computer science, Technical University Dresden, 1973) is a research scientist at the CIN. His area of expertise is microprocessor hard- and software and the construction of autonomously working monitors.Peter LiewersPeter Liewers (BS, physics, University of Halle, GDR, 1957; PhD, physics, University of Leipzig, GDR, 1962) is the scientific leader of the group for reactor diagnostics at the CIN. His interests and activities have shifted from reactor physics to technical diagnostics.Peter SchumannPeter Schumann (BS, nuclear engineering, Technical University Dresden, 1963; PhD, physics, Bergakademie Freiberg, GDR, 1970) is a staff scientist at the CIN where he is concerned with digital signal processing and computer software. Formerly he worked in the field of in-core measuring techniques and neutron spectrometryFrank-Peter WeiβFrank-Peter Weiβ (BS, physics, Technical University Dresden, 1973) is a research scientist in the group for technical diagnostics at the CIN. His current interest is the application of statistical pattern recognition to technical diagnostics.
Read moreAuthors
Click to increase image sizeClick to decrease image size Additional informationNotes on contributorsY. OhsawaY. Ohsawa (PhD, Rikkyo University) is a member of the reactor control and instrumentation division staff of Hitachi Atomic Energy Research Laboratory. His interests include plant dynamics, and control and reactor diagnosis.K. KatoK. Kato (center) (ME, nuclear engineering, Tokyo University, 1969) is a member of the reactor control and instrumentation division staff of Hitachi Atomic Energy Research Laboratory, engaged in development of a reactor anomaly system.R. OyamadaR. Oyamada (BE, Ibaraki University, 1959) of the Project Engineering Section staff of Japan Materials Testing Reactor has, in recent years, been engaged in nuclear calculation to choose the core (fuel element and capsules) configuration of the JMTR.E. D. ClaytonE. D. Clayton (PhD, physics, University of Oregon, 1952) is Manager of Criticality Research at the Battelle-Pacific Northwest Laboratories, and research associate professor in the University of Washington’s Department of Nuclear Engineering. Past chairman of the Nuclear Criticality Safety Division of the American Nuclear Society, a pioneer in criticality studies with plutonium, and since its inception in 1961, director of the Plutonium Critical Mass Laboratory of PNL, Clayton is currently chairman of work groups 10 and 12 within Subcommittee ANS-8. His current technical interests include most aspects of criticality measurements and studies.Karl HornyikKarl Hornyik (PhD, nuclear engineering, University of Illinois, 1965) is assistant professor of nuclear engineering at Oregon State University. He has been working with Portland General Electric on various problems concerning nuclear power plant siting and plant safety.John E. GrundJohn E. Grund (MS, nuclear engineering, North Carolina State University, 1957) is chief nuclear engineer for Portland General Electric Company. His areas of interest are nuclear safety and licensing. He has previously worked at the NRTS in Idaho on the SPERT project in the area of reactor kinetics.D. GuarinoD. Guarino (“Perito Tecnico Industriale,” Industrial Technical Institute of Naples, 1959) joined CNEN in 1960 and has worked primarily in the field of uranium compounds chemical analysis. He is presently engaged in the development of LWR fuel elements thermal hydraulics.V. MarinelliV. Marinelli (center) (PhD, nuclear engineering, Politecnico di Torino, 1967), at CNEN since 1969, is leader of thermal hydraulic studies at Gruppo Progettazione e Sperimentazione of CNEN Plutonium Program. His main areas of interest are the development of LWR computer codes as well as the planning and analysis of experimental tests.L. PastoriL. Pastori (“Perito Tecnico Industriale,” Industrial Technical Institute for Nuclear Energy Enrico Fermi, Rome, 1962), at CNEN since 1962, is expert in computer software problems and is presently engaged in studies of core simulator computer codes.M. W. MahoneyM. W. Mahoney (BS, physical metallurgy, University of California, Berkeley) is currently enrolled in an MS program at UCLA. He is a member of the ASME Subcommittee on Elevated Temperature Fatigue and Fracture. He has previously worked in nuclear reactor materials development and is currently investigating fracture, creep, and stress corrosion at elevated temperatures in a variety of materials. The current research interests ofN. E. PatonN. E. Paton (MS, metallurgical engineering, University of Aukland, New Zealand; PhD, Massachusetts Institute of Technology) include stress corrosion, fracture, and mechanical properties of various materials.J. C. WoodJ. C. Wood (MSc, University of Bristol, 1967) has been a member of the Fuels and Materials Division at Atomic Energy of Canada Limited, Chalk River Nuclear Laboratories, since leaving the Central Electricity Generating Board in 1969. His present interests include fuel engineering and stress corrosion cracking.L. D. PhilippL. D. Philipp (center) (BSEE, University of Colorado, 1963; MSEE, University of Washington, 1967; PhD, electrical engineering, University of New Mexico, 1971) has seven years experience in reactor instrumentation at Hanford where he has technical leadership responsibility for programs involving neutron flux instrumentation and insulator research and development.L. D. MuhlesteinL. D. Muhlestein (PhD, physics, Iowa State University, 1966; associate professor of physics, University of Missouri-Columbia, 1966-1973) is presently manager of the refueling and plant programs at Hanford Engineering Development Laboratory.M. R. WoodM. R. Wood (BSEE, University of Washington, 1947), presently a system engineer in the Westinghouse Hanford FFTF project, has worked in the nuclear reactor instrument field for 22 years.D. P. BrownDonald P. Brown (MSEE, University of Washington, 1965), an advanced engineer with Westinghouse Hanford Company, has 16 years of experience in nuclear instrumentation. His recent efforts have been aimed at the development of thermal- and fast-neutron detectors for in-core application.W. G. SpearWard G. Spear (MSEE, University of Idaho, 1960), presently Manager of Reactor Instrument Development at Westinghouse Hanford Company, has been working in the nuclear field for 22 years, with emphasis on reactor instrumentation development for the past 14 years.
Read moreAuthors
Authors
Contributors
Contributors
A comparison of radioactive waste from first generation fusion reactors and fast fission reactors with actinide recycling
Limitations of the fission fuel resources will presumably mandate the replacement of thermal fission reactors by fast fission reactors that operate on a self-sufficient closed fuel cycle. This replacement might take place within the next one hundred years, so the direct competitors of fusion reactors will be fission reactors of the latter rather than the former type. Also, fast fission reactors, in contrast to thermal fission reactors, have the potential for transmuting long-lived actinides into short-lived fission products. The associated reduction of the long-term activation of radioactive waste due to actinides makes the comparison of radioactive waste from fast fission reactors to that from fusion reactors more rewarding than the comparison of radioactive waste from thermal fission reactors to that from fusion reactors. Radioactive waste from an experimental and a commercial fast fission reactor and an experimental and a commercial fusion reactor has been characterized. The fast fission reactors chosen for this study were the Experimental Breeder Reactor 2 and the Integral Fast Reactor. The fusion reactors chosen for this study were the International Thermonuclear Experimental Reactor and a Reduced Activation Ferrite Helium Tokamak. The comparison of radioactive waste parameters shows that radioactive waste from the experimental fast fission reactor may be less hazardous than that from the experimental fusion reactor. Inclusion of the actinides would reverse this conclusion only in the long-term. Radioactive waste from the commercial fusion reactor may always be less hazardous than that from the commercial fast fission reactor, irrespective of the inclusion or exclusion of the actinides. The fusion waste would even be far less hazardous, if advanced structural materials, like silicon carbide or vanadium alloy, were employed.
Read moreIntroduction of Fusion Reactors as Transmutation Systems for Minor Actinides and Fission Products
This paper proposes a new strategy to introduce fusion reactors to the world. These require moderate changes to the design of current fusion reactors but add the functionality to transmute minor actinides. We perform neutron transport and burnup simulations to evaluate the effectiveness of the minor actinide transmutation system in which fusion neutron energy is rather moderate to reduce the heat load, and there is the possibility of using the Pu transmuted from minor actinides as a fertile fuel in a fast reactor. We also estimate the mass balance of a new nuclear fuel cycle with the introduction of fusion reactors. The transmutation of minor actinides by fusion neutrons is very effective in providing support factor 5 when a 1-GW fusion reactor is used with a transmutation volume of 4% of the original blanket in the case of water coolant. The reduction in the tritium breeding ratio due to the introduction of the transmutation region is around 2% in the case of a water coolant. A scenario to introduce the fusion reactors showed that 8.3-GW fusion reactors will operate to support 32 fast reactor plants of 1.5 GW(electric). The Pu generated from the fusion reactors includes 238Pu, so much so that the effective multiplication factor of fast reactors is reduced to around 1.01 and is kept greater than 1.005 for 600 days, which is preferable from the viewpoint of safety. The results indicate that by introducing a few fusion reactors, an option without the geological disposal of high-level wastes becomes available to make the fission fuel cycle system much more attractive.
Read moreIntroduction to Nuclear Physics
"Introduction to Nuclear Physics." Nuclear Science and Engineering, 29(2), pp. 312–313 Additional informationNotes on contributorsDavid L. HetrickDr. Hetrick is Professor of Nuclear Engineering at the University of Arizona. His current interests in graduate teaching and research are nuclear reactor dynamics and safety. He was a reactor physicist at Atomics International for nine years, and has taught physics at Rensselaer Polytechnic Institute and San Fernando Valley State College. He received his PhD in theoretical physics at UCLA in 1954.
Read moreAdvantages of Production of New Fissionable Nuclides for the Nuclear Power Industry in Hybrid Fusion-Fission Reactors
A concept of a large-scale nuclear power engineering system equipped with fusion and fission reactors is presented. The reactors have a joint fuel cycle, which imposes the lowest risk of the radiation impact on the environment. The formation of such a system is considered within the framework of the evolution of the current nuclear power industry with the dominance of thermal reactors, gradual transition to the thorium fuel cycle, and integration into the system of the hybrid fusion-fission reactors for breeding nuclear fuel for fission reactors. Such evolution of the nuclear power engineering system will allow preservation of the existing structure with the dominance of thermal reactors, enable the reprocessing of the spent nuclear fuel (SNF) with low burnup, and prevent the dangerous accumulation of minor actinides. The proposed structure of the nuclear power engineering system minimizes the risk of radioactive contamination of the environment and the SNF reprocessing facilities, decreasing it by more than one order of magnitude in comparison with the proposed scheme of closing the uranium–plutonium fuel cycle based on the reprocessing of SNF with high burnup from fast reactors.
Read moreREGULATORY ASPECTS OF NUCLEAR SHIP SAFETY
Journal of the American Society for Naval EngineersVolume 70, Issue 1 p. 97-104 REGULATORY ASPECTS OF NUCLEAR SHIP SAFETY HOLMES F. CROUCH, HOLMES F. CROUCH THE AUTHOR is a graduate of the U. S. Coast Guard Academy in 1940, served on various Coast Guard vessels during World War II, and later (for seven years) as a safety inspector of merchant ships. Subsequent thereto he has specialized in engineering research and technical writing in the electronic, nuclear, and guided missile fields. He holds a Master of Science Degree in Nuclear Engineering from the University of California. Mr. Crouch is presently employed as a nuclear engineer in the Research Division of the Marquardt Aircraft Co., Van Nuys, California.Search for more papers by this author HOLMES F. CROUCH, HOLMES F. CROUCH THE AUTHOR is a graduate of the U. S. Coast Guard Academy in 1940, served on various Coast Guard vessels during World War II, and later (for seven years) as a safety inspector of merchant ships. Subsequent thereto he has specialized in engineering research and technical writing in the electronic, nuclear, and guided missile fields. He holds a Master of Science Degree in Nuclear Engineering from the University of California. Mr. Crouch is presently employed as a nuclear engineer in the Research Division of the Marquardt Aircraft Co., Van Nuys, California.Search for more papers by this author First published: February 1958 https://doi.org/10.1111/j.1559-3584.1958.tb03277.x AboutPDF ToolsRequest permissionExport citationAdd to favoritesTrack citation ShareShare Give accessShare full text accessShare full-text accessPlease review our Terms and Conditions of Use and check box below to share full-text version of article.I have read and accept the Wiley Online Library Terms and Conditions of UseShareable LinkUse the link below to share a full-text version of this article with your friends and colleagues. Learn more.Copy URL Share a linkShare onFacebookTwitterLinkedInRedditWechat Volume70, Issue1February 1958Pages 97-104 RelatedInformation
Read moreFocus on Authors
Focus on Authors
Experiences from the design, deployment, and usage of the UCSB meshnet testbed
In this article we report on our effort and experience in designing, deploying, and using our 30-node wireless mesh testbed, the University of California at Santa Barbara (UCSB) MeshNet. Compared to simulation, the construction and utilization of a wireless mesh testbed poses many new challenges. We discuss the challenges with distributed testbed management, nonintrusive and distributed monitoring, and node status visualization. These are vital components in a sustainable wireless mesh testbed, but at the same time nontrivial to design and. realize. As a case study, we present the UCSB MeshNet architecture, including its management, monitoring, and visualization systems. We share our lessons learned from this effort and believe that they are valuable to other researchers who develop experimental wireless mesh networks
Read moreDesigns for an infrared free-electron laser based on gyrotron-powered electromagnetic wigglers
The possibility of developing gyrotron-powered electromagnetic wiggler free-electron laser (FEL) oscillators is of considerable interest for reducing the electron energy required for operation in the infrared spectrum. This paper considers the design of a 10.6 /spl mu/m electromagnetic wiggler FEL experiment based on the University of California at Santa Barbara (UCSB) 6 MeV electrostatic accelerator. Both waveguide and quasioptical wiggler resonator configurations are considered. A prescription for optimizing the gain of a waveguide electromagnetic wiggler FEL is derived and the nonlinear regime is treated by relating the electromagnetic wiggler FEL equations-of-motion to the "universal" normalized FEL equations. Point designs are given showing accelerator, gyrotron, and output parameters for 10.6 /spl mu/m Proof-of-Principle FEE experiments based on both waveguide gyrotron and quasioptical gyrotron wigglers. Designs are given for both a 5- and a 2-A FEL electron beam.< <ETX xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">></ETX>
Read more