Automated accurate emotion recognition system using rhythm-specific deep convolutional neural network technique with multi-channel EEG signals

Deep convolutional neural networks (DCNNs) for diagnosis of disease on chest radiographs (CXR) have been shown to be biased against males or females if the datasets used to train them have unbalanced sex representation. Prior work has suggested that DCNNs can predict sex on CXR, which could aid forensic evaluations, but also be a source of bias. To (1) evaluate the performance of DCNNs for predicting sex across different datasets and architectures and (2) evaluate visual biomarkers used by DCNNs to predict sex on CXRs. Chest radiographs were obtained from the Stanford CheXPert and NIH Chest XRay14 datasets which comprised of 224,316 and 112,120 CXRs, respectively. To control for dataset size and class imbalance, random undersampling was used to reduce each dataset to 97,560 images that were balanced for sex. Each dataset was randomly split into training (70%), validation (10%), and test (20%) sets. Four DCNN architectures pre-trained on ImageNet were used for transfer learning. DCNNs were externally validated using a test set from the opposing dataset. Performance was evaluated using area under the receiver operating characteristic curve (AUC). Class activation mapping (CAM) was used to generate heatmaps visualizing the regions contributing to the DCNN's prediction. On the internal test set, DCNNs achieved AUROCs ranging from 0.98 to 0.99. On external validation, the models reached peak cross-dataset performance of 0.94 for the VGG19-Stanford model and 0.95 for the InceptionV3-NIH model. Heatmaps highlighted similar regions of attention between model architectures and datasets, localizing to the mediastinal and upper rib regions, as well as to the lower chest/diaphragmatic regions. DCNNs trained on two large CXR datasets accurately predicted sex on internal and external test data with similar heatmap localizations across DCNN architectures and datasets. These findings support the notion that DCNNs can leverage imaging biomarkers to predict sex and potentially confound the accurate prediction of disease on CXRs and contribute to biased models. On the other hand, these DCNNs can be beneficial to emergency radiologists for forensic evaluations and identifying patient sex for patients whose identities are unknown, such as in acute trauma.

Interstitial lung disease (ILD) refers to a group of various abnormal inflammations of lung tissues and early diagnosis of these disease patterns is crucial for the treatment. Yet it is difficult to make an accurate diagnosis due to the similarity among the clinical manifestations of these diseases. In order to assist the radiologists, computer-aided diagnosis systems have been developed. Besides, the potential of deep convolutional neural networks (CNNs) is also expected to exert on the medical image analysis in recent years. In this paper, we design a new deep convolutional neural network (CNN) architecture to achieve the classification task of ILD patterns. Furthermore, we also propose a novel two-stage transfer learning (TSTL) method to deal with the problem of the lack of training data, which leverages the knowledge learned from sufficient textural source data and auxiliary unlabeled lung CT data to the target domain. We adopt the unsupervised manner to learn the unlabeled data, by which the objective function composed of the prediction confidence and mutual information are optimized. The experimental results show that our proposed CNN architecture achieves desirable performance and outperforms most of the state-of-the-art ones. The comparative analysis demonstrates the promising feasibility and advantages of the proposed two-stage transfer learning strategy as well as the potential of the knowledge learning from lung CT data. Graphical Abstract The framework of the proposed two-stage transfer learning method.

In the field of Brain-Computer Interface (BCI), usage of Electroencephalogram (EEG) signals provides various applications in many fields. EEG signals investigation is necessary due to an effective way of determining neurological brain disorders. These disorders include Epileptic and autism in the brain structures which are identified by the abnormal synchronous electrical discharge of the neuronal activities. The multichannel EEG signals are recorded these abnormal electrical events which can be positioned on the scalp of the brain. The aim of this research work is to classify various patterns of EEG recording samples namely autistic, epilepsy and normal using the deep learning algorithm. In order to remove the artifacts from EEG dataset, the Independent Components Analysis (ICA) technique is used to minimization the noise which is segmented and filtered using an elliptic band-pass filter. Next, EEG signal transforms to Power Spectrum Density Energy Diagrams (PSDEDs). Therefore, the techniques of feature extraction can transform the signals into various feature vectors which it automatically extracts features from the PSDED by applying Deep Convolutional Neural Networks (DCNN) and by making use of the Fully Connected (EC) layer the signals can be classified as autistic, epilepsy and normal. The classification accuracy created by the suggested DCNN model is achieved 80% for training data set validation.

The influencing factors of community risk are complex. For the low accuracy of traditional prediction model, a multichannel convolutional neural network community risk prediction model is proposed by improving convolutional neural network of deep learning. First of all, in the community risk prediction model, the structure of multichannel input convolutional neural network is selected. Then, add it into the full connection layer. Subsequently, the DenseNet layer is added to establish connections between different network layers. Finally, the receptive field is improved, and the gradient disappearance is solved. Thus, the prediction accuracy of model is improved. Compared with the traditional model, the proposed multichannel convolutional neural network model has better prediction accuracy. In addition, it performs better on the three indicators, namely, correlation coefficient R , coefficient of determination R 2 , and mean square root error RMSE. Compared with the commonly used LSTM model and logic regression model, the proposed model also has certain advantages, which is more suitable for community risk prediction.

The categorization of sleep stages helps to diagnose different sleep-related ailments. In this paper, an entropy-based information–theoretic approach is introduced for the automated categorization of sleep stages using multi-channel electroencephalogram (EEG) signals. This approach comprises of three stages. First, the decomposition of multi-channel EEG signals into sub-band signals or modes is performed using a novel multivariate projection-based fixed boundary empirical wavelet transform (MPFBEWT) filter bank. Second, entropy features such as bubble and dispersion entropies are computed from the modes of multi-channel EEG signals. Third, a hybrid learning classifier based on class-specific residuals using sparse representation and distances from nearest neighbors is used to categorize sleep stages automatically using entropy-based features computed from MPFBEWT domain modes of multi-channel EEG signals. The proposed approach is evaluated using the multi-channel EEG signals obtained from the cyclic alternating pattern (CAP) sleep database. Our results reveal that the proposed sleep staging approach has obtained accuracies of 91.77%, 88.14%, 80.13%, and 73.88% for the automated categorization of wake vs. sleep, wake vs. rapid eye movement (REM) vs. Non-REM, wake vs. light sleep vs. deep sleep vs. REM sleep, and wake vs. S1-sleep vs. S2-sleep vs. S3-sleep vs. REM sleep schemes, respectively. The developed method has obtained the highest overall accuracy compared to the state-of-art approaches and is ready to be tested with more subjects before clinical application.

Ultrasound imaging has become a prevalent examination method in prenatal diagnosis. Accurate acquisition of fetal facial standard plane (FFSP) is the most important precondition for subsequent diagnosis and measurement. In the past few years, considerable effort has been devoted to FFSP recognition using various hand-crafted features, but the recognition performance is still unsatisfactory due to the high intraclass variation of FFSPs and the high degree of visual similarity between FFSPs and other non-FFSPs. To improve the recognition performance, we propose a method to automatically recognize FFSP via a deep convolutional neural network (DCNN) architecture. The proposed DCNN consists of 16 convolutional layers with small 3 × 3 size kernels and three fully connected layers. A global average pooling is adopted in the last pooling layer to significantly reduce network parameters, which alleviates the overfitting problems and improves the performance under limited training data. Both the transfer learning strategy and a data augmentation technique tailored for FFSP are implemented to further boost the recognition performance. Extensive experiments demonstrate the advantage of our proposed method over traditional approaches and the effectiveness of DCNN to recognize FFSP for clinical diagnosis.

Chaos Game Representation (CGR) is an emerging means of visualising and representing genomic and proteomic sequences. There exist many open questions related to its effective application to various computational tasks. In this work, we begin to address some of these questions by comparing four variants of the Chaos Game to generate CGR imagery as part of a multi-class classification task to identify the source organism for a given protein. We propose a novel nodal configuration for icosagon and 20-flake CGRs. Using two datasets, we performed fine-tuning using seven deep convolutional neural network (CNN) architectures and report modest performance over random among the 56 test conditions, highlighting certain shortcomings in effectively leveraging CGR in conjunction with deep CNN architectures. Many of the insights from this work will serve to orient subsequent protein-related studies involving CGR-based encoding and be generally applicable to disparate domains seeking to leverage CGR for sequence-type data.

In deep convolutional neural networks (DCNNs), model size and computation complexity are two important factors governing throughput and energy efficiency when deployed to hardware for inference. Recent works on compact DCNNs as well as pruning methods are effective, yet with drawbacks. For instance, more than half the size of all MobileNet models lies in their last two layers, mainly because compact separable convolution (CONV) layers are not applicable to their last fully connected (FC) layers. Also, in pruning methods, the compression is gained at the expense of irregularity in the DCNN architecture, which necessitates additional indexing memory to address nonzero weights, thereby increasing memory footprint, decompression delays, and energy consumption. In this article, we propose cyclic sparsely connected (CSC) architectures, with memory/computation complexity of <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\mathcal {O}(N\log {}N)$ </tex-math></inline-formula> , where <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$N$ </tex-math></inline-formula> is the number of nodes/channels given a DCNN layer that, contrary to compact depthwise separable layers, can be used as an overlay for both FC and CONV layers of <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\mathcal {O}(N^{2})$ </tex-math></inline-formula> . Also, contrary to pruning methods, CSC architectures are structurally sparse and require no indexing due to their cyclic nature. We show that both standard convolution and depthwise convolution layers are special cases of the CSC layers, whose mathematical function, along with FC layers, can be unified into one single formulation and whose hardware implementation can be carried out under one arithmetic logic component. We examine the efficacy of the CSC architectures for compression of LeNet, AlexNet, and MobileNet DCNNs with precision ranging from 2 to 32 bits. More specifically, we surge upon the compact 8-bit quantized 0.5 MobileNet V1 and show that by compressing its last two layers with CSC architectures, the model is compressed by <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\sim 1.5\times $ </tex-math></inline-formula> with a size of only 873 kB and little accuracy loss. Finally, we design a configurable hardware that implements all types of DCNN layers including FC, CONV, depthwise, CSC-FC, and CSC-CONV indistinguishably within a unified pipeline. We implement the hardware on a tiny Xilinx field-programmable gate array (FPGA) for total on-chip processing of the compressed MobileNet that, compared to the related work, has the highest Inference/J while utilizing the smallest FPGA.

The evolution and improvements of deep learning are being used to tackle any research obstacles that could be converted into classification problems in all spheres of life. Each Deep convolutional neural network (DCNN) design's output is determined by the depth and value of the hyperparameters, which explains why so many of them have been proposed. These DCNN architectures must be created entirely from scratch, and they can only be used for the applications for which they were intended. Transfer learning may be used to modify these pre-trained networks so they are more appropriate for particular purposes. This article aims to evaluate the empirical performance of the applicability of pre-trained DCNN models to identify human face presentation threats (FPAD). Human FPAD is one of the most significant and crucial areas of research right now because of the introduction of ambient computing, which necessitates contact-free identification of persons with the help of their biometric traits. Six pre-trained DCNN models are taken into account for an experimental evaluation in human FPAD alias VGG19, VGG16, DensNet121, MobileNet, Xception, and InceptionV3. The investigation makes use of the NUAA and Replay-Attack benchmark FPAD datasets. Thepade's sorted block truncation coding (SBTC) 10-ary features are merged with deep learning features produced from the finest performing finetuned DCNNs to enhance the FPAD capabilities of analyzed machine learning (ML) classifiers. The integration of features of Thepade's SBTC 10-ary and DCNN has considerably increased the FPAD accuracy of ML classifiers with slightly more computations of feature extraction.

The leather industry plays a crucial role in the production of high-quality leather products to remain competitive in the market. Due to various reasons such as material handling and turning, leather defects can appear at different stages of the production process. This paper proposed deep learning techniques, specifically transfer learning, deep convolutional neural networks (D-CNN), and ensemble learning for automating leather defect detection and classification. The dataset was taken from the open source Kaggle. The dataset was preprocessed from the beginning. However, we performed Error Level Analysis (ELA) to detect possible changes or fraud in the image. We also used data augmentation techniques (resizing, rescaling, flipping, rotation, zooming, and contrasting) on the dataset to improve the model performance. This study investigated deep learning architectures for automatic leather defect detection, comparing them with seven deep convolutional neural networks (D-CNN) models and transfer learning architectures. Furthermore, we introduce and evaluate two novel ensemble models: MER built on transfer learning architecture (MobileNetV2, EfficientNetB0, and ResNet50) and AZL built on D-CNN architecture (AlexNet, ZfNet, and LeNet). A key contribution of this study is the demonstration of significant performance improvements achieved by strategically integrating squeeze and excitation and label smoothing techniques into transfer learning, D-CNN, and ensemble frameworks. Our proposed MER ensemble method achieves a state-of-the-art of 96.39% for leather defect detection. The proposed model was evaluated using performance metrics including precision, recall, F1-score, AUC, ROC, and Matthews Correlation Coefficient (MCC). Additionally, Grad-CAM was employed for explainable AI to visualize and interpret the model’s decision-making process. Comparative analysis against separate transfer learning and D-CNN models fails to establish the superior performance of our MER ensemble, which highlights the potential to significantly advance automated quality inspection in leather production. This study provides insights into evaluating the best deep learning techniques for leather defect classification, paving the way for more accurate, efficient, and reliable industrial applications. Proposes a robust deep learning-based framework for automated leather defect detection using transfer learning, deep CNNs, and two novel ensemble models (MER and AZL), enhanced with squeeze-and-excitation and label smoothing techniques. Achieves state-of-the-art performance with the proposed MER ensemble model, achieve 96.39% accuracy, and demonstrates superior results across precision, recall, F1-score, AUC–ROC, and MCC. Integrates Error Level Analysis (ELA), extensive data augmentation, and Grad-CAM–based explainable AI to ensure data reliability, improve generalization, and provide transparent visual interpretation of defect regions for industrial quality inspection.

Human activity recognition (HAR) is one of the important research areas in pervasive computing. Among HAR, sensor-based activity recognition refers to acquiring a high-level knowledge about human activities from readings of many low-level sensor. In recent years, although traditional methods of deep learning (DL) have been widely used for sensor-based HAR with some good performance, they still face such challenges as feature extraction and characterization, continuous action segmentation in dealing with time series problems. In this study, a multichannel fusion model is proposed by the idea of dividing. In this proposed architecture, a multichannel convolutional neural network (CNN) is used to enhance the ability to extract features at different scales, and then the fused features are fed into gated recurrent unit (GRU) for feature labeling and enhanced feature representation, through the learning of temporal relationships. Finally, the multichannel CNN-GRU model is designed using global average pooling (GAP) to connect the feature maps with the final classification. The model performance was conducted on three benchmark datasets of WISDM, UCI-HAR, and PAMAP2 with the accuracy of 96.41%, 96.67%, and 96.25% respectively. The results show that the proposed model demonstrates better activity detection capability than some of the reported results.

The perceived texture directionality is an important, not fully explored image characteristic. In many applications texture directionality detection is of fundamental importance. Several approaches have been proposed, such as the fast Fourier-based method. We recently proposed a method based on the interpolated grey-level co-occurrence matrix (iGLCM), robust to image blur and noise but slower than the Fourier-based method. Here we test the applicability of convolutional neural networks (CNNs) to texture directionality detection. To obtain the large amount of training data required, we built a training dataset consisting of synthetic textures with known directionality and varying perturbation levels. Subsequently, we defined and tested shallow and deep CNN architectures. We present the test results focusing on the CNN architectures and their robustness with respect to image perturbations. We identify the best performing CNN architecture, and compare it with the iGLCM, the Fourier and the local gradient orientation methods. We find that the accuracy of CNN is lower, yet comparable to the iGLCM, and it outperforms the other two methods. As expected, the CNN method shows the highest computing speed. Finally, we demonstrate the best performing CNN on real-life images. Visual analysis suggests that the learned patterns generalize to real-life image data. Hence, CNNs represent a promising approach for texture directionality detection, warranting further investigation.

Introduction Catathrenia is a rare sleep-related breathing disorder characterized by recurrent monotonous groaning during sleep. The acoustic characteristics of groaning and snoring sounds have been investigated. This study aims to propose a deep convolutional neural network (CNN) for automatic binary classification. Methods This study consisted of 3728 episodes of groaning sounds and 4577 episodes of snoring sounds obtained from synchronized audio of full-night polysomnography. Four features extracted from log-scaled mel-spectrograms were used as input. The background gaussian noise and the time-shifting were used to augment the dataset. The dataset was randomly split into training (70%), validation (15%), and testing datasets (15%). A deep learning convolutional neural network architecture was trained and evaluated. Results The proposed CNN model achieves an accuracy of 95.0% on the binary classification of groaning and snoring sounds. The model attains a sensitivity/recall of 96.4%, a specificity of 93.4%, and an F1 score of 94.84%. Conclusion The proposed CNN architecture has performed well in the automatic binary classification of groaning and snoring sounds, which could reduce difficulties in acoustic analyses of groaning episode detection. The model needs to be verified with more audio data before it can be put into clinical use better. Support (if any)

As the aging of concrete structures becomes increasingly severe, crack detection has become a crucial aspect of maintaining their sustainable use. This paper investigates an automatic detection and analysis method for concrete cracks based on deep convolutional neural network architecture. The study utilized drones equipped with high-definition cameras to capture images of concrete structures such as bridges and roads, collecting over 10,000 original images containing cracks. Using Labelme software for point-by-point image annotation and applying data augmentation techniques like rotation and scaling, the dataset was expanded to 30,000 images to meet the requirements of deep learning model training. An improved AlexNet model was developed, replacing the fully connected layer with global average pooling to enhance robustness and reduce overfitting. The model achieved an average accuracy of 95.42% on the test set, outperforming traditional methods by 15%. The model also proved effective in noisy environments. Additionally, a semantic segmentation model based on Fully Convolutional Network (FCN) was introduced, incorporating atrous convolution and spatial pyramid pooling, achieving a pixel-level accuracy of 97.6%, surpassing benchmark models such as FCN and U-Net. The model accurately estimated crack width, with an error rate within ±2% compared to field measurements. This method improves detection efficiency and accuracy while reducing manual intervention, providing strong support for the maintenance of concrete structures.

In this paper, we discuss the assessment of the emotional state of the user from digitized handwriting for implicit human-computer interaction. The proposed concept exemplifies how a digital system could recognize the emotional context of the interaction. We discuss our approach to emotion recognition and the underlying neurophysiological mechanisms. To verify the viability of our approach, we have conducted a series of tests where participants were asked to perform simple writing tasks after being exposed to a series of emotionally-stimulating video clips from EMDB[6], one set of four clips per each quadrant on the circumplex model of emotion[28]. The user-independent Support Vector Classifier (SVC) built using the recorded data shows up to 66% accuracy for certain types of writing tasks for 1 in 4 classification (1. High Valence, High Arousal; 2. High Valence, Low Arousal; 3. Low Valence, High Arousal; 4. Low Valence, Low Arousal). In the same conditions, a user-dependent classifier reaches an average of 70% accuracy across all 12 study participants. While future work is required to improve the classification rate, this work should be seen as proof-of-concept for emotion assessment of users while handwriting aiming to motivate research on implicit interaction while writing to enable emotion-sensitivity in mobile and ubiquitous computing.