B*Bπcoupling using relativistic heavy quarks

Precision Lattice Calculation of Kaon Decays with Mobius Domain Wall Fermions Hantao Yin We report our recent development in algorithms and progress in measurements in lattice QCD. The algorithmic development includes the forecasted force gradient integrator, and further theoretical development and implementation of the Mobius domain wall fermions. These new technologies make it practical to simulate large 48 × 96 and 64 × 128 lattice ensembles with (5.5fm) boxes and 140MeV pion. The calculation was performed using the Mobius domain wall fermions and the Iwasaki gauge action. Simulated directly at physical quark masses, these ensembles are of great value for our ongoing and future lattice measurement projects. With the help of measurement techniques such as the eigCG algorithm and the all mode averaging method, we perform a direct, precise lattice calculation of the semileptonic kaon decay K −→ πlν using these newly generated high quality lattice ensembles. Our main result is the form factor f± Kπ(q ) evaluated directly at zero momentum transfer q = 0. Free of various systematic errors, this new result can be used to determine the CKM matrix element Vus to a very high precision when combined with experimental input. The calculation also provides results for various low energy strong interaction constants such as the pseudoscalar decay constants fK and fπ, and the neutral kaon mixing matrix element BK . These calculations are naturally performed by reusing the propagators calculated for the kaon semileptonic decay mentioned above. So they come with no or very low additional cost. The results allow us to also determine these important low energy constants on the lattice to unprecedented accuracy.

We present a lattice computation of the first moment of the kao n’s leading-twist distribution amplitude. We use ensembles with 2+1 dynamical flavours of doma in wall fermions and the Iwasaki gauge action from the RBC and UKQCD joint dataset. We observethe expected chiral behaviour and obtain h ξ i (2 GeV) ≡ 3/5 a 1 (2 GeV) = 0.032(3), which agrees very well with other results obtained using QCD sum-rules and the recent lattice result from the UKQCD/QCDSF collaboration.

We present an update on ongoing work to extract pseudoscalar and vector decay constants for $B^{(*)}$, $B^{(*)}_s$ and $B^{(*)}_c$ mesons and determine phenomenologically-interesting ratios such as $f_{B_s}/f_B$ or $f_{B^*}/f_B$. Our calculation is based on ${\rm N_f}=2+1$ dynamical flavour gauge field ensembles generated by the RBC/UKQCD collaborations using domain-wall fermions and the Iwasaki gauge action. Using domain-wall light, strange, and charm quarks and relativistic $b$ quarks, we obtain results at multiple lattice spacings and valence quark masses.

We report on our computation of the hadronic matrix elements of the four-quark operators needed for the study of $K^0-{\bar K^0}$ mixing beyond the Standard Model (SM). We consider nf=2+1 Domain-Wall fermions on Iwasaki gauge action with lightest unitary pion of 290 MeV and a single lattice spacing a=0.086 fm. The renormalization is performed non-perturbatively through the RI-MOM scheme and our results are converted perturbatively to MSbar. We have estimated the various systematic errors. Our results confirm a previous quenched study, where large ratios of non-SM to SM matrix elements were obtained.

{Delta}u-{Delta}d} are in agreement with experiment, and show only very mild quark mass dependence. The second, RBC/UK, set of ensembles employs one strange and two degenerate (up and down) dynamical DWF quarks and Iwasaki gauge action. The strange quark mass is set at 0.04, and three up/down mass values of 0.03, 0.02 and 0.01 in lattice units are used. The lattice cutoff is a{sup -1} {approx} 1.6GeV and the spatial volume is about (3.0fm){sup 3}. Even with preliminary statistics of 25-30 gauge configurations, the ratios g{sub A}/g{sub V} and <x>{sub u-d}/<x>{sub {Delta}u-{Delta}d} are consistent with experiment and show only very mild quark mass dependence. Another structure function moment, d{sub 1}, though yet to be renormalized, appears small in both sets.

Lattice QCD with domain wall quarks and applications to weak matrix elements

The light baryon spectrum calculated with 2+1 flavors of domain wall fermions

We report on numerical lattice QCD calculations of some of the low moments of the nucleon structure functions. The calculations are carried out with gauge configurations generated by the RBC and UKQCD collaborations with (2+1)-flavors of dynamical domain wall fermions and the Iwasaki gauge action ($\beta = 2.13$). The inverse lattice spacing is $a^{-1} = 1.73$ GeV, and two spatial volumes of ((2.7{\rm fm})^3) and ((1.8 {\rm fm})^3) are used. The up and down quark masses are varied so the pion mass lies between 0.33 and 0.67 GeV while the strange mass is about 12 % heavier than the physical one. The structure function moments we present include fully non-perturbatively renormalized iso-vector quark momentum fraction, (< x >_{u-d}), helicity fraction, (< x >_{\Delta u - \Delta d}), and transversity, (< 1 >_{\delta u - \delta d}), as well as an unrenormalized twist-3 coefficient, (d_1). The ratio of the momentum to helicity fractions, (< x >_{u-d}/< x >_{\Delta u - \Delta d}), does not show dependence on the light quark mass and agrees well with the value obtained from experiment. Their respective absolute values, fully renormalized, show interesting trends toward their respective experimental values at the lightest quark mass. A prediction for the transversity, (0.7 < < 1 >_{\delta u -\delta d} < 1.1), in the (\bar{\rm MS}) scheme at 2 GeV is obtained. The twist-3 coefficient, (d_1), though yet to be renormalized, supports the perturbative Wandzura-Wilczek relation.

SummaryThis paper reviews the most popular methods which are used in lattice QCD to compute the determinant of the lattice Dirac operator: Gaussian integral representation and noisy methods. Both of them lead naturally to matrix function problems. We review the most recent development in Krylov subspace evaluation of matrix functions. The second part of the paper reviews the formal relationship and algebraic structure of domain wall and overlap fermions. We review the multigrid algorithm to invert the overlap operator. It is described here as a preconditioned Jacobi iteration where the preconditioner is the Schur complement of a certain block of the truncated overlap matrix.

We report our numerical lattice QCD calculations of the isovector nucleon form factors for the vector and axialvector currents: the vector, induced tensor, axialvector, and induced pseudoscalar form factors. The calculation is carried out with the gauge configurations generated with N{sub f} = 2+1 dynamical domain wall fermions and Iwasaki gauge actions at {beta} = 2.13, corresponding to a cutoff a{sup -1} = 1.73 GeV, and a spatial volume of (2.7 fm){sup 3}. The up and down quark masses are varied so the pion mass lies between 0.33 and 0.67 GeV while the strange quark mass is about 12% heavier than the physical one. We calculate the form factors in the range of momentum transfers, 0.2 &amp;lt; q{sup 2} &amp;lt; 0.75 GeV{sup 2}. The vector and induced tensor form factors are well described by the conventional dipole forms and result in significant underestimation of the Dirac and Pauli mean-squared radii and the anomalous magnetic moment compared to the respective experimental values. We show that the axial-vector form factor is significantly affected by the finite spatial volume of the lattice. In particular in the axial charge, g{sub A}/g{sub V}, the finite volume effect scales with a single dimensionless quantity, m{sub {pi}}L, the product of the calculated pion mass and the spatial lattice extent. Our results indicate that for this quantity, m{sub {pi}} L &amp;gt; 6 is required to ensure that finite volume effects are below 1%.

We present a calculation of the electromagnetic form factor of the pion in N f = 2 + 1 flavor lattice QCD. Calculations are made on the PACS-CS gauge field configurations generated using Iwasaki gauge action and Wilson-clover quark action on a 323 × 64 lattice volume with the lattice spacing estimated as a = 0.0907(13) fm at the physical point. Measurements of the form factor are made using the technique of partially twisted boundary condition to reach small momentum transfer as well as periodic boundary condition with integer momenta. Additional improvements including random wall source techniques and a judicious choice of momenta carried by the incoming and outgoing quarks are employed for error reduction. Analyzing the form factor data for the pion mass at M π ≈ 411 MeV and 296 MeV, we find that the NNLO SU(2) chiral perturbation theory fit yields 〈r 2〉 = 0.441 ± 0.046 fm2 for the pion charge radius at the physical pion mass. Albeit the error is quite large, this is consistent with the experimental value of 0.452 ± 0.011 fm2. Below M π ≈ 300 MeV, we find that statistical fluctuations in the pion two-and three-point functions become too large to extract statistically meaningful averages on a 323 spatial volume. We carry out a sample calculation on a 644 lattice with the quark masses close to the physical point, which suggests that form factor calculations at the physical point become feasible by enlarging lattice sizes to M π L ≈ 4.

We report a lattice QCD calculation of the hadronic light-by-light contribution to the muon anomalous magnetic moment at a physical pion mass. The calculation includes the connected diagrams and the leading, quark-line-disconnected diagrams. We incorporate algorithmic improvements developed in our previous work. The calculation was performed on the 48^{3}×96 ensemble generated with a physical pion mass and a 5.5fm spatial extent by the RBC and UKQCD Collaborations using the chiral, domain wall fermion formulation. We find a_{μ}^{HLbL}=5.35(1.35)×10^{-10}, where the error is statistical only. The finite-volume and finite lattice-spacing errors could be quite large and are the subject of ongoing research. The omitted disconnected graphs, while expected to give a correction of order 10%, also need to be computed.

We present preliminary results on the light, charmed and bottom baryon spectra using overlap valence quarks on the background of 2+1+1 flavours HISQ gauge configurations of the MILC collaboration. These calculations are performed on three different gauge ensembles at three lattice spacings (a ∼ 0.12 fm, 0.09 fm and 0.06 fm) and for physical strange, charm and bottom quark masses. The SU(2) heavy baryon chiral perturbation theory is used to extrapolate baryon masses to the physical pion mass and the continuum limit extrapolations are also performed. Our results are consistent with the well measured charmed baryons. We predict the masses of many other states which are yet to be discovered.

We present the results of the physical point simulation in 2+1 flavor lattice QCD with the nonperturbatively $O(a)$-improved Wilson quark action and the Iwasaki gauge action at $\beta=1.9$ on a $32^3 \times 64$ lattice. The physical quark masses together with the lattice spacing is determined with $m_\pi$, $m_K$ and $m_\Omega$ as physical inputs. There are two key algorithmic ingredients to make possible the direct simulation at the physical point: One is the mass-preconditioned domain-decomposed HMC algorithm to reduce the computational cost. The other is the reweighting technique to adjust the hopping parameters exactly to the physical point. The physics results include the hadron spectrum, the quark masses and the pseudoscalar meson decay constants. The renormalization factors are nonperturbatively evaluated with the Schr{\"o}dinger functional method. The results are compared with the previous ones obtained by the chiral extrapolation method.

We present preliminary results for nucleon form factors including the axial charge and the isovector electric radius in 2+1 flavor QCD at almost the physical pion mass on a $96^4$ lattice with the lattice spacing of 0.085 fm. The configurations are generated with the stout-smeared $O(a)$-improved Wilson quark action and the Iwasaki gauge action at $\beta$=1.82. A large spatial volume of $(8.1 {\rm fm})^3$ allows us to investigate the form factors at small momentum transfer region. We discuss analyses of the momentum dependence of the form factors with the z-expansion.