Boundary-Assisted Learning for Building Extraction from Optical Remote Sensing Imagery

The stability of arc bubble is a crucial indicator of underwater wet welding process. However, limited research exists on detecting arc bubble edges in such environments, and traditional algorithms often produce blurry and discontinuous results. To address these challenges, we propose a novel arc bubble edge detection method based on deep transfer learning for processing underwater wet welding images. The proposed method integrates two training stages: pre-training and fine-tuning. In the pre-training stage, a large source domain dataset is used to train VGG16 as a feature extractor. In the fine-tuning stage, we introduce the Attention-Scale-Semantics (ASS) model, which consists of a Convolutional Block Attention Module (CBAM), a Scale Fusion Module (SCM) and a Semantic Fusion Module (SEM). The ASS model is further trained on a small target domain dataset specific to underwater wet welding to fine-tune the model parameters. The CBAM can adaptively weight the feature maps, focusing on more crucial features to better capture edge information. The SCM training method maximizes feature utilization and simplifies training by combining multi-scale features. Additionally, the skip structure of SEM effectively mitigates semantic loss in the high-level network, enhancing the accuracy of edge detection. On the BSDS500 dataset and a self-constructed underwater wet welding dataset, the ASS model was evaluated against conventional edge detection models—Richer Convolutional Features (RCF), Fully Convolutional Network (FCN), and UNet—as well as state-of-the-art models LDC and TEED. In terms of Mean Absolute Error (MAE), accuracy, and other evaluation metrics, the ASS model consistently outperforms these models, demonstrating edge detection capabilities that are both effective and stable in detecting arc bubble edges in underwater wet welding images.

Weeds are one of the primary factors that reduce crop productivity by competing for nutrients and water, causing the plant to lose weight and resulting in reduced grain yield. Traditional agricultural practices often rely on uniform herbicide application, which can contaminate soil and raise costs. On agricultural land, selective weed treatment are an efficient and cost-effective way to control weeds that require a deep learning-based crop and weed segmentation system. Many existing crop and weed segmentation research works focus on achieving precise crop and weed segmentation results, rather than building lightweight models to deploy on edge devices. To attain this, we develop an effective and efficient convolutional neural network, namely the Concatenated Attention U-Net with Convolutional Block Attention Module (CAUC). By integrating Linear Concatenated Blocks (LCB), Attention Gate (AG) connections, and Convolutional Block Attention Module (CBAM), the proposed model efficiently utilizes feature maps among its architectural components to achieve superior performance. Depth-wise convolution layers and 1 × 1 convolution layers in LCBs reduce computational complexity. To enable the proposed model to identify the weed portions in multiple crop fields, we integrated three datasets in this research work, namely the Crop/Weed Field Image Dataset (CWFID), Sugar Beet, and Sunflower datasets. Experimental results on carrot, sugar beet, and sunflower crop datasets demonstrate high Accuracy (99.09%), MIoU (81.02%), and F1-score (99.06%), with a modest model size (5.6 MB) and computational parameters (0.377 million). We developed a lightweight computer vision application (13.7 MB) to demonstrate the model’s efficacy on low-computational devices.

Acquiring the growth information of tobacco plants quickly and accurately is an important prerequisite for their daily management. In view of the problem that the convolutional neural network is easily affected by background information, this study introduces the Convolutional Block Attention Module into the U <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2-</sup> Net. This method is mainly composed of an encoder and a decoder. Before the feature map is decoded, it will go through the Convolutional Block Attention Module to filter more important features and inhibit the invalid features. In the decoder, in order to fuse the features of objects in different scales, the feature maps in the decoder are up-sampled and then concatenated. This information aggregation solves the problem of difficult object detection at different scales to some extent. The results of this method are compared with four current mainstream deep learning models(U <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> -Net, DeeplabV3+, PSP-Net, U-Net). The result shows: 1) The U <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> -Net network based on the Convolutional Block Attention Module has the highest extraction accuracy for the UAV visible light remote senseing of tobacco(accuracy was 98.53%, recall was 96.00%,F1-Score was 96.38%, kappa coefficient was 0.95, IOU was 93.02%); 2)In the extraction of the three test areas, the extraction value of this method is highly consistent with the label area value(the area ratios of a total of 13 plants in the three regions were kept between 90% and 100%),the effect is much higher than that of DeeplabV3+ and PSP-Net, and slightly higher than the extraction effect of U <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> -Net and U-Net. 3)In the segmentation of three typical canopy closure regions of A, B, and C, most of the accuracy factors in different regions can reach 94% and above. It can be seen that the method in this study has certain advantages in feature extraction and has certain value in practical application.

With the continuous development of deep learning technologies, fault prediction techniques based on various neural networks have been evolving. The deep learning modules based on U-Net residual networks have shown significant advantages in both learning efficiency and effectiveness. In this paper, we propose a deep learning model that integrates a 3D U-Net residual architecture, Convolutional Block Attention Module (CBAM), and Multi-scale Enhanced Global Attention (MEGA) module for automatic seismic fault detection and segmentation. This model can effectively handle complex 3D seismic data, fully exploiting both spatial and channel information, significantly improving the prediction accuracy for small faults, while only slightly increasing the computational cost.Firstly, the model uses the 3D U-Net as the backbone framework, where the residual blocks (BasicRes) extract features through multiple convolution layers. The CBAM module is incorporated to apply attention weighting, enhancing the model's ability to focus on critical information. The CBAM module combines channel attention and spatial attention, effectively adjusting the importance of feature maps from different dimensions, enabling the model to identify potential fault features in complex seismic data.Secondly, the MEGA module is introduced into the model, which further improves the model's feature representation ability by fusing multi-scale features and applying a global attention mechanism. By weighting global information, the MEGA module helps the model better capture key seismic fault features during feature fusion. This design allows the model to focus not only on local details but also to fully utilize the global contextual information in 3D data, thereby enhancing the accuracy of fault detection.After validation, the model achieved promising results in seismic fault detection tasks, automatically identifying and segmenting fault structures in seismic data. The accuracy was improved from 80% with the original 3D U-Net residual network to 85%-87%. This provides strong support for applications such as seismic exploration and subsurface imaging.Keywords: Seismic Fault Detection, 3D U-Net, Convolutional Block Attention Module (CBAM), Multi-scale Enhanced Global Attention (MEGA), Deep Learning

Motivated by the increasing popularity and success of attention mechanisms, we observe that popular convolutional attention models like Squeeze-and-Excite (SE) and Convolutional Block Attention Module (CBAM) rely on expensive multi-layer perceptron (MLP) layers. These MLP layers significantly increase computational complexity, making such models less applicable to 3D image contexts, where the data dimensionality and computational costs are inherently higher. In 3D medical imaging, such as pulmonary CT scans, efficient processing is crucial due to the large volume of data. Traditional 2D attention mechanisms, when generalized to 3D, increase the computational load, creating a demand for more efficient attention mechanisms that can operate effectively within a 3D tasks. In this work, we investigate the possibility of incorporating fully convolutional attention within 3D context. Particularly, we present two 3D fully convolutional attention blocks in which we demonstrate effectiveness within the 3D context. We demonstrate effectiveness of the proposed method using the pulmonary CT scans for 3D lung nodule detection. Building on existing 3D nodule detection methods, we present AttentNet, an automated lung nodule detection framework from CT images that performs detection as an ensemble of two stages, candidate proposal stage (Region Proposal Network), in which a high number of candidates is produced, and a false positive reduction stage to reduce the number of false alarms. Throughout our work, we compare the proposed 3D convolutional attention blocks to a number of popular 2D convolutional attention mechanisms by generalizing them to 3D modules, including SE units and CBAM channel attention and spatial attention units. We also compare these to Transformer self-attention units. For the False positive reduction stage, we incorporate a joint analysis approach that considers the variable nodule morphology by aggregating spatial information from different contextual levels. We use LUNA-16 lung nodule detection dataset to demonstrate the benefits of using the proposed fully convolutional attention blocks comparing to baseline popular lung nodule detection methods where no attention is used. It is worth noting that our work does not aim at achieving state-of-the-art results in the lung nodule detection task, rather to demonstrate the benefits of incorporating fully convolutional attention within a 3D context.

Deep learning-based building extraction methods have achieved a high accuracy in closed remote sensing datasets. In fact, the distribution bias between the source and target domains can lead to a dramatic decrease in their building extraction effect in the target domain. However, the mainstream domain adaptation methods that specifically address this domain bias problem require the reselection of many unlabeled samples and retraining in other target domains. This is time-consuming and laborious and even impossible at small regions. To address this problem, a novel domain adaptation framework for cross-domain building extraction is proposed from a perspective of anomaly detection. First, the initial extraction results of images in the target domain are obtained by a source domain-based pre-trained model, and then these results are classified into building mixed and non-building layers according to the predicted probability. Second, anomalous objects in the building layer are detected using the isolation forest method. Subsequently, the remaining objects in the building layer and the objects in the non-building layer are used as positive and negative samples, respectively, to reclassify the mixed layer using the random forest classifier. The newly extracted objects are fused with the remaining objects in the building layer as the final result. Four different experiments are performed on different semantic segmentation models and target domains. Some experimental results indicate that our framework can improve cross-domain building extraction compared to the pre-trained model, with an 8.7% improvement in the F1 metric when migrating from the Inria Aerial Image Labeling dataset to the Wuhan University dataset. Furthermore, experimental results show that our framework can be applied to multiple target domains without retraining and can achieve similar results to domain adaptation models based on adversarial learning.

MRI image classification of brain tumors is critical for accurate and early diagnosis. New developments in deep learning have revealed that inserting attention mechanisms into convolutional neural networks can greatly improve classification performance. This work assesses the effectiveness of Squeeze-and-Excitation (SE) and Convolutional Block Attention Module (CBAM) integrated with the ResNet50 model for brain tumor classification. The SE module recalibrates channel-wise feature responses, while CBAM enhances feature representation by combining channel and spatial attention. The SE and CBAM are combined with ResNet50, greatly increasing classification accuracy, precision, and recall when compared to the basic model, according to experimental results on MRI datasets. The suggested model employs attention mechanisms to focus valuable information selectively and suppress irrelevant information. The experiments on publicly available brain tumor datasets display great improvements over basic CNN models, with precision, recall, accuracy, as well as F1 score at 0.9914, 0.9903, 0.9945, and 0.9908, respectively. From these results, the importance of attention mechanisms in deep learning models for medical imaging is highlighted, which suggests that SE and CBAM modules can be available as more dependable and effective instruments for brain tumor classification in clinical settings. Future studies should investigate transformer-based and hybrid attention techniques to enhance automated brain tumor categorization.

Artificial Intelligence (AI) based ultrasound image processing is quite important for diagnosis of renal tumors. Traditional networks, however, struggle with accurate lesion segmentation and differentiation between benign and malignant cases in complex ultrasound images. This paper introduces an advanced multitask network model to overcome these limitations. Our model combines a deep separable Convolutional ResNet with a NestedUNet, enriched with a Convolutional Block Attention Module (CBAM) and residual connections, enhancing its precision in lesion segmentation and classification in intricate images. Compared with the existing methods, the model proposed in this study has the following innovative contributions: (1) combining depthwise separable convolution and NestedUNet, the computational efficiency and feature extraction ability of the model are significantly improved; (2) The Convolutional Block Attention Module (CBAM) is introduced to enhance the attention to key features, to effectively distinguish lesions in complex backgrounds; (3) The gradient flow is improved by the residual connection, which ensures the stable training of the deep network. Experimental results show that the IoU of the model on the kidney tumor dataset reaches 94.23%, which is significantly better than that of STUNet (92.31%). These results show that the model proposed in this study has significant advantages in processing complex ultrasound images, providing a more accurate basis for clinical diagnosis, and has a high application potential.

MC-ShuffleNetV2: A lightweight model for maize disease recognition

Modulation recognition of single‐component radar signals has been widely studied in the fewer years. Meanwhile, as the electromagnetic environment in the actual battlefields is ever‐increasingly complicated, the demand for the modulation recognition of multi‐component radar signals is also increasing. However, the modulation recognition of single‐component radar signals performs poorly on multi‐component radar signals. To address this problem, a novel modulation recognition method of multi‐component radar signals based on the deep convolutional neural network with a convolutional block attention module (DCNN‐CBAM) is proposed, and the network architecture mainly includes mobile‐inverted bottleneck convolution (MBConv), Fused‐MBConv, and convolutional block attention module (CBAM). An adaptive optimization algorithm Adam with weighted gradient and dynamic bound is proposed for accelerating convergence speed and generalisation performance. The proposed method can not only recognise dual‐component and three‐component radar signals but also four‐component radar signals. The experimental results demonstrate that the recognition accuracies of all radar signals modulation types are more than 83.57% at −8 dB for dual‐component radar signals, 67.41% for three‐component radar signals, and 57.95% for four‐component radar signals, which verify the better recognition performance of DCNN‐CBAM for multi‐component radar signals. The recognition accuracy of the proposed DCNN‐CBAM for dual‐component radar signals can be up to 95.95% at −6 dB, which shows superior recognition performance over the residual method. This work provides an essential guidance for enhancing the recognition performance of multi‐component radar signals.

Brain-computer interfaces (BCI) allow for the brain to communicate with electronic devices. Concerning the BCI paradigms, motor imagery uses brain signals to decode an imagined movement. However, this is a hard task given the low signal-to-noise ratio. Usually, the main steps in BCI models are pre-processing, feature extraction, and classification. In recent years, Convolutional Neural Networks (CNNs) have been gaining relevance in several areas of science due to their feature extraction, translation invariance, and parameter sharing capa-bilities. Another, more recent way of feature extraction is using attention mechanisms, which are layers of neural networks based on human attention and have the ability to highlight important features. A variation of the attention mechanism is the Convolutional Block Attention Module, which combines the CNN structure with the attention mechanism. In this work, we propose a new model that joins the core architecture of EEGNet, a compact CNN widely used in the literature, with the Convolutional Block Attention Module and residual connections. The residual connections were introduced to lower data degradation throughout the model. The results highlight the residual connection's importance for the performance of the model. The proposed model obtained a kappa result 5.2% better than the EEGNet with a p-value less than 0.01 on BCI Competition IV dataset 2a, which is a well-known dataset for Motor Imagery. Furthermore, the proposal was better than EEGNet for most subjects and had the best-worst case.

Change detection with SAR images encounters more difficulties than optical ones due to the presence of the speckle noise. Recently, inspired by the human visual systems, self-attention mechanism is incorporated in large-scale classification tasks to improve the classification performance. Inspired by this, this paper proposed a novel change detection method from SAR images based on self-attention mechanism. First, training samples with pseudo-labels are generated by the log-ratio operator and hierarchical FCM algorithm. Image patches around these pixel are generated, and these patches are fed into a network with the convolutional block attention module (CBAM). After training, all the pixels from multitemporal SAR images are fed into the learned network, and then the final change map can be obtained. Experimental results on two real SAR datasets demonstrate the superiority of the proposed method over two closely related methods.

In order to realize the quantitative assessment of muscle strength in hand function rehabilitation and then formulate scientific and effective rehabilitation training strategies, this paper constructs a multi-scale convolutional neural network (MSCNN) - convolutional block attention module (CBAM) - bidirectional long short-term memory network (BiLSTM) muscle strength prediction model to fully explore the spatial and temporal features of the data and simultaneously suppress useless features, and finally achieve the improvement of the accuracy of the muscle strength prediction model. To verify the effectiveness of the model proposed in this paper, the model in this paper is compared with traditional models such as support vector machine (SVM), random forest (RF), convolutional neural network (CNN), CNN - squeeze excitation network (SENet), MSCNN-CBAM and MSCNN-BiLSTM, and the effect of muscle strength prediction by each model is investigated when the hand force application changes from 40% of the maximum voluntary contraction force (MVC) to 60% of the MVC. The research results show that as the hand force application increases, the effect of the muscle strength prediction model becomes worse. Then the ablation experiment is used to analyze the influence degree of each module on the muscle strength prediction result, and it is found that the CBAM module plays a key role in the model. Therefore, by using the model in this article, the accuracy of muscle strength prediction can be effectively improved, and the characteristics and laws of hand muscle activities can be deeply understood, providing assistance for further exploring the mechanism of hand functions .

Flowering is a crucial developing stage for rapeseed (Brassica napus L.) plants. Flowers develop on the main and branch inflorescences of rapeseed plants and then grow into siliques. The seed yield of rapeseed heavily depends on the total flower numbers per area throughout the whole flowering period. The number of rapeseed inflorescences can reflect the richness of rapeseed flowers and provide useful information for yield prediction. To count rapeseed inflorescences automatically, we transferred the counting problem to a detection task. Then, we developed a low-cost approach for counting rapeseed inflorescences using YOLOv5 with the Convolutional Block Attention Module (CBAM) based on unmanned aerial vehicle (UAV) Red-Green-Blue (RGB) imagery. Moreover, we constructed a Rapeseed Inflorescence Benchmark (RIB) to verify the effectiveness of our model. The RIB dataset captured by DJI Phantom 4 Pro V2.0, including 165 plot images and 60,000 manual labels, is to be released. Experimental results showed that indicators R2 for counting and the mean Average Precision (mAP) for location were over 0.96 and 92%, respectively. Compared with Faster R-CNN, YOLOv4, CenterNet, and TasselNetV2+, the proposed method achieved state-of-the-art counting performance on RIB and had advantages in location accuracy. The counting results revealed a quantitative dynamic change in the number of rapeseed inflorescences in the time dimension. Furthermore, a significant positive correlation between the actual crop yield and the automatically obtained rapeseed inflorescence total number on a field plot level was identified. Thus, a set of UAV- assisted methods for better determination of the flower richness was developed, which can greatly support the breeding of high-yield rapeseed varieties.

As coal mining deepens, ground fissures in mining areas pose significant risks to safety and the environment. Traditional geological exploration methods are inefficient and costly, making the precise detection of large-scale fissures difficult. Deep learning methods using unmanned aerial vehicle (UAV) images have become a popular approach for fissure detection, although challenges such as insufficient accuracy and poor adaptability in complex backgrounds remain. This study proposes an residual-depthwise separable convolution UNet (RDC-UNet) model to address these issues, building on U-Net by incorporating residual connections (RC), depthwise separable convolutions (DSC), and the convolutional block attention module (CBAM) attention mechanism. The model was trained on a dataset of 300 UAV images from a DJI Mavic 3e and outperformed the benchmark models, achieving 86.12 % mPrecision, 75.01 % mRecall, 70.72 % mIoU, and 0.7951 mF1. Ablation experiments show that removing any core module leads to a performance drop, with the DSC module reducing mF1 by 3.28 %, CBAM decreasing mIoU by 2.67 %, and RC lowering mRecall by 3.96 %. RDC-UNet is highly efficient, requiring only 7.8 million parameters, with an inference time of 75 milliseconds and a memory footprint of 180 MB, much lower than other models. This makes it well-suited for real-time UAV-based fissure monitoring. The RDC-UNet model offers high accuracy and efficiency, making it an ideal solution for cost-effective real-time monitoring of ground fissures in mining areas.