Boundary Method for Differential Subordinations of the Geometric Mean

Sanford S. Miller and Petru T. Mocanu’s theory of second-order differential subordinations was extended for the case of third-order differential subordinations by José A. Antonino and Sanford S. Miller in 2011. In this paper, new results are proved regarding third-order differential subordinations that extend the ones involving the classical second-order differential subordination theory. A method for finding a dominant of a third-order differential subordination is provided when the behavior of the function is not known on the boundary of the unit disc. Additionally, a new method for obtaining the best dominant of a third-order differential subordination is presented. This newly proposed method essentially consists of finding the univalent solution for the differential equation that corresponds to the differential subordination considered in the investigation; previous results involving third-order differential subordinations have been obtained mainly by investigating specific classes of admissible functions. The fractional integral of the Gaussian hypergeometric function, previously associated with the theory of fuzzy differential subordination, is used in this paper to obtain an interesting third-order differential subordination by involving a specific convex function. The best dominant is also provided, and the example presented proves the importance of the theoretical results involving the fractional integral of the Gaussian hypergeometric function.

The goal of this paper is to investigate some of the features of differential subordination of analytic univalent functions in an open unit disc. In addition, it has shed light on geometric features such as coefficient inequality, Hadamard product qualities, and the Komatu integral operator. Some intriguing results for third-order differential subordination and superordination of analytic univalent functions have been installed. Then, using the convolution of two linear operators, certain results of third order differential subordination involving linear operators were reported. As a result, we use features of the Komatu integral operator to analyze and study third-order subordinations and superordinations in relation to the convolution. Finally, several results for third order differential subordination in the open unit disk using generalized hypergeometric function have been addressed using the convolution operator.

Differential equations play a noticeable role in engineering, physics, economics, and other disciplines. In this paper, a general approach is suggested to solve a variety of linear and nonlinear ordinary differential equations (ODEs). With the aid of certain fundamental concepts of mathematics, Fourier series expansion and metaheuristic optimization methods, ODEs can be represented as an optimization problem. The aim is to minimize the weighted residual function (error function) of the ODEs. The boundary and initial values of ODEs are considered as constraints for the optimization model. Generational distance metric is used for evaluation and assessment of approximate solutions versus exact solutions. Two ODEs and one mechanical problem are approximately solved and compared with their exact solutions. The optimization task is carried out using different optimizers including the particle swarm optimization and the water cycle algorithm. The optimization results obtained show that the metaheuristic algorithms can be successfully applied for approximate solving of different types of ODEs.

Solving ordinary differential equations (ODEs) is vital in diverse fields. However, it is difficult to obtain the exact analytical solutions of ODEs due to their changeable mathematical forms. Traditional numerical methods can find approximate solutions for specific ODEs. Unfortunately, they often suffer from ODEs' forms and characteristics. To approximate different types of ODEs, this paper proposes a generic method based on adaptive differential evolution. Besides, in order to further reduce the error of the obtained approximate solutions, an improved Fourier periodic expansion function is developed, which is then combined with the least square weight method to formulate the ODEs as an optimization problem. Since the proposed method is not limited to ODEs' forms and constraint conditions, it can be used to approximate any ODEs, including linear ODEs and nonlinear ODEs. The proposed method is evaluated on twenty popular test cases. The results indicate that the proposed method is able to accurately approximate different ODEs with better performance compared with other methods.

Let α e [0,1]p be an analytic function in the unit disc E q and h be analytic and univalent functions in E, Φ be an analytic function in a certain domain D⊃ q (E). The authors study the differential subordinations and where z⊂E Examples of the application of these results are given.

Background The study of theory for analytic univalent and multivalent functions is an old subject in mathematics, particularly in complex analysis, that has captivated a great deal of scholars owing to the sheer sophistication of its geometrical features as well as its many research possibilities. The study of univalent functions is one of many significant elements of complex analysis for both single and multiple variables. Investigators have become keen on the conventional investigation of this topic since at least 1907. Numerous scholars in the area of complex analysis have emerged since then, including Euler, Gauss, Riemann, Cauchy, and other people. Geometric function theory combines geometry and analysis. Methods This study employs the differential subordination technique to derive multiple characteristics from the new linear operator M σ , μ n , ς Υ ( s ) . The concept of the differential subordination subclass of analytical univalent functions is analyzed. Results In this section, We studied some results on differential subordination and superordination using a specific class of univalent functions stated on a specific space of univalent functions stated on the open unit disc. Using properties of the operator, we discovered a number of properties of superordinations and subordinations related to the idea of the Hadamard product. We investigated several aspects of superordinations and subordinations using a new operator M σ , μ n , ς Υ ( s ) . Conclusions A new operator M σ , μ n , ς Υ ( s ) : Λ ⟶ Λ has been established in this paper connected to the Dziok-Srivastava operator T σ n and the Hadamard product corresponding to the Komatu integral operator Ω μ ς . The difference operator M σ , μ n , ς ϒ ( s ) can have specific properties derived by applying the differential subordination technique. And the objective of this paper is to make use of the connection ( β 1 μ + 1 ) M σ , μ n + 1 , ς ϒ ( s ) = w ( M σ , μ n , ς ϒ ( s ) ) ′ + β 1 μ ( M σ , μ n , ς ϒ ( s ) ) .

Numerical methods are crucial for solving ordinary differential equations (ODEs) that frequently arise in various fields of science and engineering. This study compares three numerical methods: the fourth-order Runge-Kutta method (RK4), the fourth-order Runge-Kutta Contra-harmonic Mean method (CoM4), and the fourth-order Adam-Bashforth-Moulton method (ABM4) in solving initial value problems of ODEs. Three IVPs of ODEs have been solved with varying step sizes using the three methods that have been proposed, and the solutions for each step size are examined. Numerical comparisons between RK4, CoM4, and ABM4 methods have been presented to solve three initial problems of ODE. Simulation results show that each method has advantages and limitations depending on the type of ODE being solved. We find that for very small step sizes, the numerical solutions agree the best with the exact solution. As such, all three proposed approaches are sufficient to solve the IVP ODE accurately and efficiently. Among the three proposed methods, we observe that the mean absolute error for the RK4 method is the smallest, followed by the ABM4 method.

Holomorphic functions differ fundamentally from real differentiable functions: they are infinitely often (real and complex) differentiable (II.3, II.7), they even admit power series expansions (II.4), their entire behaviour is determined by their values on arbitrarily small open sets (II.4, II.7), and they satisfy powerful convergence theorems and estimates (II.5). All of these properties are consequences of the Cauchy integral theorem and the integral representations that arise from it (II.1–3). Meromorphic functions extend the class of holomorphic functions (II.6); their study leads to the notion of isolated singularities and to generalizations of power series obtained by allowing negative powers (Laurent series). In addition to the phenomena that occur in the theory of functions of one complex variable, a fundamentally new phenomenon enters the picture in higher dimensions: the simultaneous holomorphic continuation of all holomorphic functions from a given domain to a larger one (II.7). Here the Cauchy integral formula (in one variable!) is again the decisive tool.

Symmetries and dynamic wave solutions for ([formula omitted])-dimensional potential Calogero–Bogoyavlenskii–Schiff equation

By using the differential operator Dm f(z), z∈ U (Definition 1), we introduce a class of holomorphic functions, denoted by , and we obtain some inclusion relations.

Various BMO-type characteristics are given for some class of holomorphic functions with a mixed norm. Some criteria are established for Blaschke products to belong to analytic Besov spaces.

Recently J. Miao proved that if is a holomorphic function with Hadamard gaps on the open unit disc D then f ∈ Xp if and only if f ∈ Bp if and only if if and if only if where Xp, Bp and denote respectively the class of holomorphic functions on D which satisfy |f′(z)|p(1 − |z|2)p − 1dxdy is a finite measure, a Carleson measure and a little Carleson measure on D. In this paper we give a higher-dimensional version of Miao's result.

This article is concerned with the asymptotic behaviour of the Mahler measure (defined for the occasion) of functions of the form \(z^n + f(z)\), where f(z) is a holomorphic function on an open subset of \({\mathbb {C}}\) such that \(f(0) \ne 0\).

We introduce a generalized Cauchy integral formula for special classes of functions, holomorphic in several complex variables. These functions also satisfy a generalized Cachy-Riemann equation. The integral formula is then applied to demonstrate that these classes of holomorphic functions are Fréchet modules over complex Clifford algebras, and to provide maximal domains of convergence for Taylor expansions, with homogeneous terms grouped together, of real analytic solutions to Maxwell's equations in vacuo.

Free convection heat transfer from vertical cylinders part I: Power law surface temperature variation