Brain MRI image classification based on transfer learning and support vector machine

Brain Magnetic Resonance Imaging (MRI) image segmentation is one of the critical technologies of clinical medicine, and is the basis of three-dimensional reconstruction and downstream analysis between normal tissues and diseased tissues. However, there are various limitations in brain MRI images, such as gray irregularities, noise, and low contrast, reducing the accuracy of the brain MRI images segmentation. In this paper, we propose two optimization solutions for the fuzzy clustering algorithm based on local Gaussian probability fuzzy C-means (LGP-FCM) model and anisotropic weight fuzzy C-means (AW-FCM) model and apply it in brain MRI image segmentation. An FCM clustering algorithm is proposed based on AW-FCM. By introducing the new neighborhood weight calculation method, each point has the weight of anisotropy, effectively overcomes the influence of noise on the image segmentation. In addition, the LGP model is introduced in the objective function of fuzzy clustering, and a fuzzy clustering segmentation algorithm based on LGP-FCM is proposed. A clustering segmentation algorithm of adaptive scale fuzzy LGP model is proposed. The neighborhood scale corresponding to each pixel in the image is automatically estimated, which improves the robustness of the model and achieves the purpose of precise segmentation. Extensive experimental results demonstrate that the proposed LGP-FCM algorithm outperforms comparison algorithms in terms of sensitivity, specificity and accuracy. LGP-FCM can effectively segment the target regions from brain MRI images.

We developed a computer-aided diagnosis (CADx) method for classification between benign nodule, primary lung cancer, and metastatic lung cancer and evaluated the following: (i) the usefulness of the deep convolutional neural network (DCNN) for CADx of the ternary classification, compared with a conventional method (hand-crafted imaging feature plus machine learning), (ii) the effectiveness of transfer learning, and (iii) the effect of image size as the DCNN input. Among 1240 patients of previously-built database, computed tomography images and clinical information of 1236 patients were included. For the conventional method, CADx was performed by using rotation-invariant uniform-pattern local binary pattern on three orthogonal planes with a support vector machine. For the DCNN method, CADx was evaluated using the VGG-16 convolutional neural network with and without transfer learning, and hyperparameter optimization of the DCNN method was performed by random search. The best averaged validation accuracies of CADx were 55.9%, 68.0%, and 62.4% for the conventional method, the DCNN method with transfer learning, and the DCNN method without transfer learning, respectively. For image size of 56, 112, and 224, the best averaged validation accuracy for the DCNN with transfer learning were 60.7%, 64.7%, and 68.0%, respectively. DCNN was better than the conventional method for CADx, and the accuracy of DCNN improved when using transfer learning. Also, we found that larger image sizes as inputs to DCNN improved the accuracy of lung nodule classification.

The classification of brain tumor is a very important section of medical diagnosis because correct and early diagnosis can greatly enhance the outcome of the patient. To aid in automated and dependable diagnostic methods, this paper examines the efficacy of already trained deep learning model to classify brain magnetic resonance imaging (MRI) scans into four categories, namely, pituitary tumor, meningioma, glioma, and no tumor. This was done using a publicly available set of 7,023 brain MRI images. DenseNet121, ResNet50, Xception and MobileNet four advanced convolutional neural network (CNN) models were also fine-tuned with transfer learning, as well as image preprocessing and data augmentation methods. Transfer learning was used to facilitate effective model adaptation with a low computation complexity and improved classification. According to the experimental findings, DenseNet121 performed better as it obtained the highest classification accuracy of 98.47% and the highest F1 score of 98.47%. The assessed models presented a high level of generalization and steady performance under a variety of evaluation criteria, which also indicates their possible application in the clinical decision support systems. These encouraging findings, however, need additional performance to improve recall on individual tumor classes, as well as the interpretability of deep-learning predictions in clinical settings. On the whole, the results highlight the great potential of the deep learning and transfer learning methods in medical image analysis, which is an opportunity to establish a more reliable, scalable and efficient solution to diagnosis. The next phase of work will involve diversifying the datasets, enhancing the model explainability, and assessing the performance of AI-oriented healthcare systems in practice to make them more widely adopted.

Alzheimer’s disease (AD) is a progressive neurodegenerative disorder that severely impacts memory and cognitive functions. Early diagnosis remains crucial for timely intervention and care. This research aims to explore the use of artificial intelligence, specifically deep learning, for the early prediction and classification of AD using structural magnetic resonance imaging (MRI) images. A dataset comprising approximately 44,000 brain MRI images with four diagnostic classes (mild, moderate, severe, and very severe dementia) was used to train and evaluate multiple convolutional neural network (CNN) architectures. Three deep learning models were developed and tested: a custom CNN built from scratch, a spatial-channel convolutional attention network (SCCAN), and a pre-trained Visual Geometry Group VGG16 model using transfer learning. The methodology included extensive preprocessing, data augmentation, normalization, and a train–validation–test split to ensure robust performance. Evaluation metrics such as accuracy, precision, recall, F1-score, and confusion matrices were used to assess classification efficacy. Among the models tested, the Visual Geometry Group VGG16 model achieved the highest classification accuracy, closely followed by the SCCAN, while the custom CNN demonstrated competitive performance with fewer layers. Grad-CAM visualizations were integrated to provide insight into model decision-making, enhancing interpretability. The results confirm the effectiveness of deep learning in classifying early AD stages with high accuracy and support its integration into clinical diagnostic tools. However, the study also identifies limitations, including dataset diversity, class imbalance, and generalizability across diverse populations. Future research should consider using larger, multi-center datasets (including PET and EEG modalities). This project demonstrates that deep learning can offer reliable, scalable, and interpretable solutions for the early detection of AD, potentially transforming the diagnostic pathway and enabling earlier therapeutic interventions.

The emergence of Alzheimer's Disease (AD) as a consequence of increasing aging population makes urgent the availability of methods for the early and accurate diagnosis. Magnetic Resonance Imaging (MRI) could be used as in vivo, non invasive tool to identify sensitive and specific markers of very early AD progression. In recent years, multivariate pattern analysis (MVPA) and machine- learning algorithms have attracted strong interest within the neuroimaging community, as they allow automatic classification of imaging data with higher performance than univariate statistical analysis. An exhaustive search of PubMed, Web of Science and Medline records was performed in this work, in order to retrieve studies focused on the potential role of MRI in aiding the clinician in early diagnosis of AD by using Support Vector Machines (SVMs) as MVPA automated classification method. A total of 30 studies emerged, published from 2008 to date. This review aims to give a state-of-the-art overview about SVM for the early and differential diagnosis of AD-related pathologies by means of MRI data, starting from preliminary steps such as image pre-processing, feature extraction and feature selection, and ending with classification, validation strategies and extraction of MRI-related biomarkers. The main advantages and drawbacks of the different techniques were explored. Results obtained by the reviewed studies were reported in terms of classification performance and biomarker outcomes, in order to shed light on the parameters that accompany normal and pathological aging. Unresolved issues and possible future directions were finally pointed out.

Brain tumors are abnormal tissue that grow uncontrolled and affect a patient's neurological function. Brain tumors come in different shapes and characteristics. Moreover, its location also differs for each patient. Brain tumors can be detected using machine learning algorithms using magnetic resonance imaging (MRI) images. However, a different machine-learning comparison is limited and needs further investigation. This study aims to compare three machine-learning methods, i.e., Support Vector Machine (SVM), Naive Bayes (NB), and Artificial Neural Network Back Propagation (ANN-BP) algorithms for detecting brain tumors. Before the comparison started, MRI image quality was enhanced by performing denoising, histogram equalization, and thresholding. After that, Gray Level Co-occurrence Matrix feature extraction was performed. MRI brain images in JPEG format were acquired from an open-access database. One thousand brain tumor and 1000 normal tumor images are used as the training data, while 100 brain tumor and 100 normal tumor images are used as testing data. Each algorithm's accuracy, precision, sensitivity, and Matthews Correlation Coefficient (MCC) are evaluated and reported. The study showed that the SVM algorithm acquired the highest performance in detecting brain tumors, followed by ANN-BP and NB. The highest accuracy, precision, sensitivity, and MCC values for testing in SVM were 98,75%, 98,22%, 99,30%, and 0,9751, respectively. Meanwhile, in testing, the highest accuracy, precision, sensitivity, and MCC values were 90.50%, 98.80%, 82.00%, and 0.8220, respectively. In conclusion, this study showed the superiority of the SVM algorithm in detecting brain tumor compared to ANN-BP and NB by performing image enhancement steps and GLCM feature extraction before its detection.

The diagnosis of brain diseases based on magnetic resonance imaging (MRI) is a mainstream practice. In the course of practical treatment, medical personnel observe and analyze the changes in the size, position, and shape of various brain tissues in the brain MRI image, thereby judging whether the brain tissue has been diseased, and formulating the corresponding medical plan. The conclusion drawn after observing the image will be influenced by the subjective experience of the experts and is not objective. Therefore, it has become necessary to try to avoid subjective factors interfering with the diagnosis. This paper proposes an intelligent diagnosis model based on improved deep convolutional neural network (IDCNN). This model introduces integrated support vector machine (SVM) into IDCNN. During image segmentation, if IDCNN has problems such as irrational layer settings, too many parameters, etc., it will make its segmentation accuracy low. This study made a slight adjustment to the structure of IDCNN. First, adjust the number of convolution layers and down-sampling layers in the DCNN network structure, adjust the network’s activation function, and optimize the parameters to improve IDCNN’s non-linear expression ability. Then, use the integrated SVM classifier to replace the original Softmax classifier in IDCNN to improve its classification ability. The simulation experiment results tell that compared with the model before improvement and other classic classifiers, IDCNN improves segmentation results and promote the intelligent diagnosis of brain tissue.

A hybrid convolutional neural network for intelligent wear particle classification

Brain tumor implies development of strange cells in brain. In cutting edge stages, brain tumor is most risky infection which can't be relieved. Thus, it ought to be identified in the beginning phases with the assistance of MRI (Magnetic Resonance Image). So, there will be more changes to the patient to endure. Quite possibly, the most functional and significant technique is to utilize Deep Neural Network (DNN). In this paper, a Deep Convolutional Neural Network (DCNN) based on VGG16 model has been developed to identify a tumor through brain Magnetic Resonance Imaging (MRI) dataset. In the clinical field, the strategies of machine learning (ML) and data mining hold a critical stand. It is effectively used to achieve the efficiency and exact location of tumor. The proposed technique involves automatic segmentation method based on Deep Convolution neural network (DCNN). It is layer based segmentation and classification technique. Different levels are engaged with the proposed technique, first step is data collection and then pre-processing & average filtering is done, after that segmentation, feature extraction and classification via DCNN is performed. In this paper, a fresh technique for classification of brain MRI images has been proposed using DCNN based softmax Classifier. The proposed system has been compared with the existing ones. The results are really encouraging as the loss is reduced and accuracy is increased. The proposed system achieved the training accuracy of 98.9% and validation accuracy of 100%. The training loss is reduced up to 0.0230 and the validation loss reduced up to 0.0109.

The location of the tumor, the evaluation of its shape, its position and its interactions with nearby brain structures, etc. are signs and desired indicators. Nowadays clinical tools for in vivo observation areas of the brain such as X-ray scanner, the magnetic resonance imaging (MRI) et., are numerous. Among these techniques, MRI is increasingly used in clinical routine. The image allows precise localization of different structures. However, observation and tumor image analysis prove to be a delicate exercise that requires to use multiple acquisitions under different protocols. In this article we present a new method for detecting and extracting tumor regions applied on brain MRI images. This method consists of three main stages: (i) Extracting the region of interest (the brain) by using the EMBE method. (ii) to study and to make an histogram analysis of the MRI image in order to create learning and initialize the classification algorithm for retrieving and locating the tumor. (iii) Detection and extraction of the tumor, by using by the classification algorithm “Support Vector Machine”. The image will be split into two components which are Tumor class and No-tumor class. Our method will be completed by a characterization of the tumor area to specify its geometric properties. This work will help the radiologists in handling the numerous number of MRI images they have to deal daily. Our contribution will facilitate tumor detection and extraction in a most minimal time.

Accurate classification of Magnetic Resonance Images (MRI) is essential to accurately predict Mild Cognitive Impairment (MCI) to Alzheimer’s Disease (AD) conversion. Meanwhile, deep learning has been successfully implemented to classify and predict dementia disease. However, the accuracy of MRI image classification is low. This paper aims to increase the accuracy and reduce the processing time of classification through Deep Learning Architecture by using Elastic Net Regularisation in Feature Selection. The proposed system consists of Convolutional Neural Network (CNN) to enhance the accuracy of classification and prediction by using Elastic Net Regularisation. Initially, the MRI images are fed into CNN for features extraction through convolutional layers alternate with pooling layers, and then through a fully connected layer. After that, the features extracted are subjected to Principle Component Analysis (PCA) and Elastic Net Regularisation for feature selection. Finally, the selected features are used as an input to Extreme Machine Learning (EML) for the classification of MRI images. The result shows that the accuracy of the proposed solution is better than the current system. In addition to that, the proposed method has improved the classification accuracy by 5% on average and reduced the processing time by 30 ~ 40 seconds on average. The proposed system is focused on improving the accuracy and processing time of MCI converters/non-converters classification. It consists of features extraction, feature selection, and classification using CNN, FreeSurfer, PCA, Elastic Net, and Extreme Machine Learning. Finally, this study enhances the accuracy and the processing time by using Elastic Net Regularisation, which provides important selected features for classification.

Maize kernel traits such as kernel length, kernel width, and kernel number determine the total kernel weight and, consequently, maize yield. Therefore, the measurement of kernel traits is important for maize breeding and the evaluation of maize yield. There are a few methods that allow the extraction of ear and kernel features through image processing. We evaluated the potential of deep convolutional neural networks and binary machine learning (ML) algorithms (logistic regression (LR), support vector machine (SVM), AdaBoost (ADB), Classification tree (CART), and the K-Neighbor (kNN)) for accurate maize kernel abortion detection and classification. The algorithms were trained using 75% of 66 total images, and the remaining 25% was used for testing their performance. Confusion matrix, classification accuracy, and precision were the major metrics in evaluating the performance of the algorithms. The SVM and LR algorithms were highly accurate and precise (100%) under all the abortion statuses, while the remaining algorithms had a performance greater than 95%. Deep convolutional neural networks were further evaluated using different activation and optimization techniques. The best performance (100% accuracy) was reached using the rectifier linear unit (ReLu) activation procedure and the Adam optimization technique. Maize ear with abortion were accurately detected by all tested algorithms with minimum training and testing time compared to ear without abortion. The findings suggest that deep convolutional neural networks can be used to detect the maize ear abortion status supplemented with the binary machine learning algorithms in maize breading programs. By using a convolution neural network (CNN) method, more data (big data) can be collected and processed for hundreds of maize ears, accelerating the phenotyping process.

Segmentation and classification of brain tumors from MRI images based on adaptive mechanisms and ELDP feature descriptor

Remote Sensing (RS) image classification has recently attracted great attention for its application in different tasks, including environmental monitoring, battlefield surveillance, and geospatial object detection. The best practices for these tasks often involve transfer learning from pre-trained Convolutional Neural Networks (CNNs). A common approach in the literature is employing CNNs for feature extraction, and subsequently train classifiers exploiting such features. In this paper, we propose the adoption of transfer learning by fine-tuning pre-trained CNNs for end-to-end aerial image classification. Our approach performs feature extraction from the fine-tuned neural networks and remote sensing image classification with a Support Vector Machine (SVM) model with linear and Radial Basis Function (RBF) kernels. To tune the learning rate hyperparameter, we employ a linear decay learning rate scheduler as well as cyclical learning rates. Moreover, in order to mitigate the overfitting problem of pre-trained models, we apply label smoothing regularization. For the fine-tuning and feature extraction process, we adopt the Inception-v3 and Xception inception-based CNNs, as well the residual-based networks ResNet50 and DenseNet121. We present extensive experiments on two real-world remote sensing image datasets: AID and NWPU-RESISC45. The results show that the proposed method exhibits classification accuracy of up to 98%, outperforming other state-of-the-art methods.

A Parkinson's disease-related nuclei segmentation network based on CNN-Transformer interleaved encoder with feature fusion.