Capacity Analysis of Orthogonal Pulse-Based TH-UWB Signals

Ultra wideband (UWB) radio is a promising technology for short range wireless communications. It can be used for both high rate and low rate transmissions. High data rate can be achieved by using multiband (MB)-UWB approach whereas low data rate with robust system performance can be obtained by employing time hopping (TH)-UWB radio systems Majhi et al. (2006); Win & Scholtz (1998a). Nowadays, applications of UWB are spreading to various fields such as vehicle communications, wireless sensor networks, ad hoc wireless networks, and controller area networks. The most of the systems require low to moderate (1 kbs-100 mbs) data rates with an acceptable implementation cost. However, due to the presence of fast Fourier transform (FFT) and inverse FFT (IFFT), MB-UWB may not be a cost effective procedure for low data rate systems. Therefore, one needs an efficient system which adaptively changes the data rate from low to moderate with robust system performance. TH-UWB with OOK-PSM modulation provides low data rate with robust system performance Majhi, Madhukumar, Premkumar & Richardson (2008). However, it is possible to scale the TH-UWB radio system for low to moderate data rates by incorporating higher level modulation schemes with an adaptive method. For TH-UWB systems, various M-ary modulation schemes such as pulse positionmodulation (PPM), pulse amplitude modulation (PAM), pulse shape modulation (PSM), and their combined forms have been proposed to improve data rates and system performance with low complexities Bin et al. (2003); Durisi & Benedetto (2003); Ghavami et al. (2002); Michell et al. (2003); Usuda et al. (2004). However, due to the increase of inter symbol interference (ISI) in the presence of multipath channel, M-ary PPM or M-ary orthogonal PPM (OPPM) are not effective for TH-UWB systems with RAKE reception when M is high Foerster (2003); Win & Scholtz (1998b). High-level M-ary PAM is rarely used in short range and low power consumption communications systems Guvenc & Arslan (2003). This is because that the Euclidian distances between constellations become small with increase in M. Due to its robustness against ISI and multiple access interference (MAI), pulse-based modulation such as PSM has become an interesting research topic in TH-UWB, direct sequence UWB (DS-UWB) and transmitted referenceUWB (TR-UWB) radio systemsChu M de Abrue et al. (2003); Gezici et al. (2006); Hwang et al. (2007); Kim & Womack (2007); Parr et al. (2003). However, high-level M-ary PSM cannot be used due to the limited auto correlation properties 2

This paper describes a combined modulation scheme for time hopping ultra wideband (TH-UWB) radio systems using on-off keying (OOK) and pulse shape modulation (PSM). For this scheme, a set of orthogonal pulses is used to represent bits in a symbol. These orthogonal pulses are transmitted simultaneously in the same time slot resulting in a composite pulse. By assigning different subset of orthogonal pulses for each user, multi-user interference can be reduced considerably. The proposed transmission scheme can achieve higher data rate by using fewer pulses and can use fewer number of receiver correlators than those used in PSM. Due to the presence of OOK, the proposed scheme requires minimum energy and is applicable for energy constrained UWB systems. The bit-error-rate (BER) performance of the proposed transmission scheme is analyzed both mathematically and through computer simulations in additive white Gaussian noise (AWGN) channel and modified IEEE 802.15.3a S-V UWB multipath channel model. The present paper also compares the proposed scheme with existing PSM and its combined modulation schemes.

It is well known that the Gaussian distribution is not an accurate model for approximating the probability density function (PDF) of the multiple access interference (MAI) in timehopping UWB (TH-UWB) systems. An exact theoretical model which explains the key features of the PDF of the MAI in THUWB systems is discussed. These features, which can be precisely anticipated by the proposed model include impulses, singularities, and the tail behaviour in the distribution of the MAI. The model reveals in quantitative terms why a Gaussian approximation for the MAI in TH-UWB systems is highly imprecise even in an environment with a large number of independent interferers. Based on the model obtained for the PDF of the MAI and exploiting the maximum a posteriori (MAP) receiver design rule, the optimal attainable BER performance of binary TH-UWB receivers in additive white Gaussian noise channels is numerically determined. The performances of some recently proposed UWB receivers are benchmarked against the optimal performance showing that some of them achieve near-optimal performance.

A wavelet packet function based multiple access (WPMA) system is developed in this paper to maximize capacity and improve receiver performance over frequency selective multipath fading channels. To design an efficient receiver that mitigates residual multiple access interference (MAI) and intersymbol interference, while improving receive signal-to-interference and noise ratio (SINR) simultaneously on the uplink; a multichannel decision feedback equalizer (DFE) following a wavelet packet function based RAKE receiver is proposed. Simulation results show that, over GSM TU channels the developed receiver performs quite well if the power of each user is perfectly controlled or the space diversity combining (SDC) technique is applied.

In this paper a novel channel shortening equalizer (CSE) for time hopping ultra wideband (TH-UWB) multiple access system with pulse position modulation (PPM) is presented. As UWB channels have very long impulse responses as compared to the narrow pulse width, CSE can reduce the number of correlators. In UWB systems, due to the received pulse that is very similar to the channel impulse response (CIR), the proposed algorithm maximizes the shortening signal to inter-symbol and multiuser interferences ratio (SSINR), defined as the ratio of the received signal energy inside the desired window to the energy in the wall and multiuser interference. The existence of the proposed CSE before correlation receiver decreases the complexity of the receiver architecture by significantly reducing the number of effective channel taps. Further we extend our method to derive general expression for the bit error rate (BER) performance in the presence of inter-symbol and multiuser interferences. Computer simulation results are provided to compare the performance of the proposed method with a MSSNR CSE, lower bound, also known as All-Rake, Partial-Rake, and Selective-Rake in terms of Rake operational temporal windows and BER.

In synchronous code division multiple access (CDMA) systems, both multiple access interference (MAI) and intersymbol interference (ISI) arise. MAI is present due to the CDMA format while ISI is present due to channel multipath. One approach to overcome these problems is to detect the entire package of data for all users at once. This implies working with matrices with dimensions proportional to the product of the data package length and the number of active users. In this paper, we present an alternative approach. This alternative consists of a type of multistage detector that overcomes the MAI and ISI problems; in addition, it has complexity proportional to the number of CDMA users, is computationally efficient, and is suitable for pipeline implementation which allows fast data processing. Simulations are compared to a derived single user bound for the average bit error probability and the results prove the validity of the proposed detection method.

In recent times, there has been growing interests in integration of voice, data and video traffic in wireless communication networks. With these growing interests, WCDMA has immerged as an attractive access technique. The performance of WCDMA system is deteriorated in presence of multipath fading environment. The paper presents space-time coded minimum mean square error (MMSE) Decision Feedback Equalizer (DFE) for wideband code division multiple access (WCDMA) in a frequency selective channel. The filter coefficients in MMSE DFE are optimized to suppress noise, intersymbol interference (ISI), and multiple access interference (MAI) with reasonable system complexity. For the above structure, we have presented the estimation of BER for a MMSE DFE using computer simulation experiments. The simulation includes the effects of additive white Gaussian noise, multipath fading and multiple access interference (MAI). Furthermore, the performance is compared with standard linear equalizer (LE) and RAKE receiver. Numerical and simulation results show that the MMSE DFE exhibits significant performance improvement over the standard linear equalizer (LE) and RAKE receiver.

The Multi user Multi Carrier Direct sequencing Code Division Multiple Access (MU-MC-DS-CDMA) strategy was developed in response to rising demand for system capacity, higher data rates, and multimedia services. It's essentially a combination of CDMA and OFDM schemes. As a result, MC-CDMA takes the advantages of both CDMA and OFDM technologies. CDMA improves bandwidth consumption performance, whereas OFDM helps to minimize Inter Symbol Interference (ISI) and multipath fading. This dissertation suggests a method for evaluating the performance of multi user MC-DS-CDMA system. BER and PAPR are used to evaluate the results. The Bit Error Rate (BER) output of the proposed method is then examined using MATLAB for various modulation techniques. By using Walsh-Hadamard (W-H) code is used because it eliminates Multiple Access Interference (MAI). In terms of BER, it can be shown that BPSK performs better than QPSK. Key Words: AWGN, BER, ISI, MC-CDMA, Rayleigh Fading Channel, SNR, QPSK, MAI

This paper carries comprehensive comparison of Interleave Division Multiple Access (IDMA) and Code Division Multiple Access (CDMA) systems in terms of performance (BER) and behavior to different number of users. Performance analysis of two systems whose transmitter and receiver structures are almost same are studied under Additive White Gaussian Noise (AWGN) and performance differences are illustrated by simulation results. Although Multiple Access Interference (MAI) and Intersymbol Interference (ISI) can affect the performance of the CDMA system, simulation results illustrates that IDMA system model achieves this type of problem using their interleavers. Results also show that large number of users can easily be adapted by the IDMA scheme much easier than CDMA scheme.

Data transmission over HF channels is subject to phenomena of dispersion, absorption and multiple paths. Performance may be improved by using orthogonal frequency division multiplexing spread spectrum (OFDM-SS) systems. In OFDM-SS systems, transmitting data over slowly varying multi-path channels, both inter-symbol interference (ISI) and multiple-access interference (MAI) arise and should therefore be mitigated. Two adaptive non-linear equalization architectures based on the minimum mean-square error (MMSE) criterion are proposed and examined over such channels. The first receiver architecture is for single-user detection (SUD) consisting of a multiple-layer feed-forward filter (ML-FFF) and a feedback filter (FBF). The ML-FFF acts as a multi-path diversity combiner as well as canceller of precursor ISI and main-cursor MAI while the FBF acts as a canceller of post-cursor ISI. The second receiver architecture is for multi-user detection (MUD) where in addition to the first structure, it employs a centralized FBF (CFBF) for cancelling the MAI of previous symbols. Results indicate that an enhancement in capacity is obtained by the multi-user structure over the single-user structure. Additionally, it is demonstrated that both structures perform multi-path energy combining (Rake-like) when the delay spread is in excess of a symbol interval.

In this paper, we tackle the problem of theoretical evaluation for the multistage parallel interference cancellation (PIC) scheme in a DS-CDMA system with orthogonal modulation and long scrambling codes. The studied system operates on the reverse link in a time-varying multipath Rayleigh fading channel. By applying the Central Limit Theorem to multiple access interference (MAI) and intersymbol interference (ISI), as well as identically distributed chips from a single interferer, the bit error rate (BER) performance of the PIC scheme at any stage can be recursively computed from the signal-to-noise ratio, number of users, the number of paths per user, processing gain of the CDMA system, as well as the average received power of each path. The proposed approximative analysis is validated by the Monte-Carlo simulations and proved to be accurate, and it gives insight into the performance and capacity one can expect from the PIC based receivers under different situations.

CDMA system capacity is interference limited. The multiuser transmission (MUT) with adaptive antenna arrays for the downlink direction is considered to increase system capacity and to eliminate the multiple-access interference (MAI) and the inter-symbol interference (ISI) of the CDMA system. In this paper, the angular gain of the spatial filter is modeled by a piece-line function to analysis the interference difference between the in-beam users and the out-beam users. Based on this analysis, a lower complexity MUT scheme using spatial classes is proposed for avoiding MUT computation complexity, which can achieve the nearly same performance with the conventional MUT scheme. The bit-error probability approximation of this MUT scheme is also analyzed as well. The simulation result is used to confirm the availability of this lower complexity MUT scheme.

SUMMARYIn code division multiple access (CDMA) communication systems, the communication channel is usually corrupted with time‐varying interferences, which include channel fading, multiple access interference, round‐trip delay, and noise. Power control is an important issue for CDMA systems to achieve higher communication link quality and better system capacity under time‐varying interferences. In the previous studies, most of power control algorithms only considered the user's target signal‐to‐interference‐and‐noise‐ratio (SINR) to maintain quality of service. In this study, a multi‐objective optimization method is proposed for power control design in CDMA systems. With a shadow system and an h ∞ filter to compensate for the round‐trip delay, the proposed power control scheme can simply adjust transmission power to achieve the best compromise between several objectives, such as minimization of SINR deviation, minimization of power consumption, and minimization of the system outage. Several simulation results are given to confirm the performance of the proposed power control scheme. Copyright © 2013 John Wiley & Sons, Ltd.

This paper studies the effects of multiple access interference (MAI) for ultra wideband (UWB) systems in AWGN and multipath fading channels. Time hopping (TH) and direct sequence (DS) based UWB spreading approaches are performed, utilizing binary pulse amplitude modulation (PAM) and pulse shape modulation (PSM). Both the possibilities of having synchronous and asynchronous users have been taken into account. In the fading channel case, different coherent and non-coherent detection methods have been considered. Simulated performance results are depicted for the above mentioned UWB systems when a variable number of equally powered users are operating in the channel. Results show that in both the AWGN and fading channel the DS system performance shows sensibly different results in the synchronous and asynchronous case. This is due to the continuous time transmission of the different users. This problem does not occur in systems using TH spreading since the different users are less overlapped in time, due to the spreading approach used. In the fading channel, TH systems show a general higher performance loss in all cases compared to DS, in contrast to what happens in the AWGN case. That is, the allocation of the TH codes creates a higher interfering effect due to MAI in the presence of multipath fading. In general, DS-based systems outperform the corresponding TH ones.

We propose the use of time-varying (TV) signaling in modulation schemes to provide multiuser detection and multipath diversity in TV wireless channels. Specifically, we design an orthogonal linear chirp modulation scheme that is based on assigning different users with optimally designed parameters in order to reduce multiple-access interference. We also derive conditions on the parameters of the modulation signals to achieve multipath diversity. Furthermore, we propose the use of TV pilot signals with nonlinear instantaneous frequency and matched time-frequency (TF) techniques to estimate fast-fading channels with unknown state information. The proposed algorithm simplifies to the estimation of the parameters of multiple linear chirps, which we perform using the modified matching pursuit decomposition. We compare our estimation method with the use of pilot signals with linear instantaneous frequency, which we implement using the reassigned spectrogram. The proposed modulation scheme is applied to a frequency-hopped code-division multiple-access system for which we demonstrate improved performance when compared with frequency-shift-keying (FSK) modulation due to the designed multipath diversity and low multiple-access interference. Our simulations also demonstrate the increased estimation performance when pilot signals with nonlinear structures are used instead of linear structured ones to estimate TV channel parameters.