Channel sharing techniques in hybrid optical networks for data centers

Modeling and performance analysis of a data center network (DCN) combining optical packet switching (OPS) and agile optical circuit switching (OCS) in a unified platform are presented. Hybrid optoelectronic packet routers which combine optical switching fabric and electronic buffers are used, supporting 100 Gbit/s (25 Gbit/s × 4 wavelengths) optical packets. OCS transmission is implemented by a novel “express path,” (ExP) an instant wavelength path on demand, which enables certain flows following the ExP with no packet contention, whereas ordinary OPS packets are switched with a deflection routing algorithm and buffering for contention resolution. This architecture can support OCS for large and reliability-sensitive data transferring and OPS for latency-sensitive applications. The performance of the network is investigated via numerical simulations of top-of-rack switch (ToR)-to-ToR traffic in an N-dimensional (up to 4096 node) torus topology. We have made the following observations: 1) torus topology results in high throughput and can be scaled out by increasing the dimension; 2) contention resolution between OPS and agile OCS is needed and our proposed strategies enhance the overall performance; and 3) in a lightly to moderately loaded case of OPS traffic, more than 100 ExPs can be supported simultaneously with acceptable affect on OPS.

Hybrid optical networks (HONs) are the combination of different switching mechanisms such as Optical Circuit Switching (OCS), Optical Burst Switching (OBS) and Optical Packet Switching (OPS). The basic idea behind HONs is to integrate the advantages of different switching mechanisms. HONs are classified into three classes as: (1) parallel hybrid optical networks, (2) integrated hybrid optical networks, (3) client-server hybrid optical networks. In this article, we describe these classes in detail and a new integrated hybrid optical network called EISM (Efficient Integration of Switching Mechanisms in all-optical networks) is introduced. The proposed EISM method could perform optimally while considering some implementation criteria; such criteria include network bandwidth utilization, implementation complexity and also the domain of network performance by combining four switching mechanisms-OCS, long-OBS, short-OBS and OPS.

Multi-tenancy is a key feature of modern data centers. It allows for the existence of multiple independent virtual infrastructures, called virtual slices, on top of the same physical infrastructure, each of them specially tailored to the tenants' needs. In such a scenario, an optimal mapping of the virtual slices plays a capital role toward an efficient utilization of the data center network resources, potentially saving costs for the data center owner. However, due to the increasing trend of bringing optics to data center networks, specific virtual slice mapping mechanisms accounting for the particularities of the optical medium (e.g., wavelength continuity constraint) have to be investigated. For this, we present an integer linear programming (ILP) model for optimally mapping a set of virtual slices from different tenants in a hybrid optical circuit switching (OCS)/optical packet switching (OPS) data center network with the aim to minimize the necessary optical transponders to be equipped in the network. Additionally, we also present a lightweight heuristic for the cases in which the ILP model scalability is compromised. The benefits of the proposals are highlighted by benchmarking them against a pure OCS solution through extensive simulations.

In optical packet switching (OPS)-based data center networks (DCNs), it is preferred to set up temporal optical circuit switching (OCS) paths for large-data transmission that requires high reliability. However, inappropriate OCS path selection could severely affect the original OPS traffic. This is because an OCS path may break the network topology and cause OPS packet circulations. We propose to maintain bypassing routes for every link of the OCS path when it is established. Then, the OPS packets can bypass the OCS links by being deflected to the bypassing routes. Therefore, this method facilitates the coexistence of OCS in OPS-based DCNs. Numerical simulations demonstrate the benefit achieved by our proposal compared with non-bypassing-route scenarios.

We develop an integrated optical packet and circuit switching node in which signaling via optical packet switching is implemented. We demonstrate 80 (8λ × 10) Gbit/s optical packet switching with <;1E-4 packet-loss-rate, 8-lightpaths establishment, and dynamic wavelength-resources control.

We propose and implement an enhanced moving average (MA) based dynamic resource allocation method for optical packet and circuit integrated (OPCI) networks. In the OPCI networks, optical packet switching (OPS) and optical circuit switching (OCS) share the total bandwidth in a fiber by allocating separate wavelength resources to them. In this work, we leverage an exponential moving average (EMA) as an enhanced MA. Every time a signaling process for path establishment or release occurs at a node, the proposed method employs the EMA of number of in-use paths to reallocate wavelengths to OCS and OPS while the conventional method employs the absolute number of in-use paths. When the EMA reaches or becomes less than a threshold value, the dynamic resource allocation is executed. As results of simulations and a verification experiment, we show that the proposed method can reduce the amount of routing processes without suffering from blocking of path establishments in comparison to the conventional method. In addition, it is expected that the proposed method can effectively allocate vaster amount of bandwidth to OPS without suffering from the blocking and achieve better system performances for OPS.

Hybrid optical switching networks make full use of the advantages of Optical Circuit Switching (OCS) and Optical Burst Switching (OBS). In parallel hybrid optical switching networks, edge nodes choose a switching mode for traffic and no longer change. The inflexible decision making of the traffic transfer mode leads to low resource utilization when the arrival rate of the OCS traffic is lower than the capacity of the light path. In this paper, a new transmission scheme is proposed to improve resource utilization for hybrid optical switching networks. When the traffic arrival rate of the light path is lower than the transmission rate of the light path, the OCS traffic flow is reshaped at the edge nodes to generate a series of voids. Then, several message packets are sent along the light path to inform the core nodes of the voids of the light paths that represent the unused bandwidth resources. To improve the resource utilization, the voids can be filled with data bursts by core nodes. The simulation results show that the new scheme can effectively reduce the burst loss rate and improve the link utilization of the hybrid optical switching network on the premise of a providing service quality guarantee for OCS traffic.

Data center networks (DCNs) are at the forefront of a radical transformation, fueled by the rapid rise of artificial intelligence (AI), cloud-native adoption, and enterprise digitalization, which together place unprecedented demands on their design and performance. From healthcare AI and intelligent transportation to business analytics, modern DCNs are expected to support a diverse and evolving mix of bandwidth-demanding applications, each with distinct quality of service (QoS) requirements. Yet, most state-of-the-art DCN solutions rely on oversimplified DCN data traffic models, failing to address the required application-level differentiation in terms of end-to-end (E2E) latency demands. In response, we propose ALAS-DCN, a novel, to our knowledge, application-aware, low-latency, scalable DCN architecture, based on optical packet switching in the intra-rack and inter-rack domains that is both designed and rigorously evaluated using commercial QoS specifications and realistic traffic patterns of different applications coexisting within the same DCN. ALAS-DCN integrates three hierarchical optical sub-networks: intra-rack, inter-rack, and bridge, each governed by a custom wavelength division multiplexing (WDM) medium access control (MAC) protocol that dynamically prioritizes critical traffic packets, according to the specific application E2E latency demands. Unlike prior approaches, our evaluation leverages realistic workload traces generated by established traffic generators, capturing the application diversity within modern data center (DC) environments. Extensive experimental simulations across five representative DC categories, each hosting a different mix of modern applications, demonstrate that ALAS-DCN consistently achieves up to 95% throughput efficiency and sub-µs latency for high priority traffic across a variety of applications, consistently meeting their differentiated latency constraints. Scalable up to 20,000 servers, ALAS-DCN redefines the DCN as not just a transport layer but an intelligent enabler of next-generation application performance.

Optical circuit switching may be instrumental in meeting the cost, energy, and aggregate bandwidth requirements of future data center networks. However, conventional MEMS beam-steering cross-connects cannot provide submillisecond switching with the port count necessary for data centers. Here, we investigate a novel noncrossbar selector switch architecture and pupil-division switching layout to improve optical switching performance by relaxing the requirement of arbitrary switch configurability. This architecture and switch design enable MEMS beam-steering micromirrors to scale to microsecond response speeds while supporting high port count and low loss switching, and can realize a number of useful interconnection topologies. We present the design, fabrication, and experimental characterization of a proof-of-principle prototype using a single comb-driven MEMS mirror to achieve 150 μs switching of 61 ports between four preprogrammed interconnection mappings. We demonstrate the scalability of this switch architecture with a detailed optical design of a 2048-port selector switch with 20 μs switching time.

Scheduling traffic for maximum switch lifetime in optical data center fabrics

An optical packet and circuit integrated network (OPCInet) will allow diverse services, enhanced functional flexibility, and efficient energy consumption, as optical packet switching (OPS) and optical circuit switching (OCS) links are provided on the same infrastructure. In this paper, we design and develop a control system consisting of header processing for optical packets, signaling and routing for optical path setup, and wavelength resource control and link switching between OPS and OCS for the efficient use of resources. Our onboard optical packet header processor is capable of 16-bit longest prefix matching by embedding a 0.6W (5% of TCAM technology on the same condition), 200 million search-per-second (equivalent to 100 Gbps) forwarding engine LSI, and a statistical memory LSI for retaining the statistical information of processed headers. Reactive control automatically selects a packet or circuit link according to the statistical traffic information from the header processor and works with signaling for optical paths. We present an experimental demonstration of a new control system using a previously developed OPCInet testbed.

Optical burst switching (OBS) is a switching technology that can efficiently operate in the optical core network using WDM technology and can also develop the future optical internet. The OBS switching technology presents a trade-off between the two switching technologies: optical circuit switching (OCS) and optical packet switching (OPS). This switching approach increases resource utilization compared with OCS technology and avoids the technological barriers of OPS networks. In OBS networks, many packets are assembled into one data burst at the edge node and a burst header packet (BHP) is sent before the burst transmission by an offset time in order to reserve the required resources in core nodes. This can cause security issues in the network and more specifically denial of service attacks that can occur if a source node is compromised. In this paper, we study a specific denial of service attack which we refer to as "BHP flooding attack", which prevents legitimate traffics from reserving the required resources at intermediate core nodes. We also propose the design of a reconfigurable BHP flooding countermeasure module that allows to counter against this type of attacks in an OBS network.

We study the fundamental properties of the hybrid combination of optical circuit switching (OCS) and electrical packet switching (EPS) used in an ultra-high-speed local area network (LAN) of the future, where chunks of data such as those containing non-compressed super-high-definition images are frequently transmitted as well as text-based data. We assume the logical topology of the OCS network in such a LAN to be single star in which the end-to-end connections are provided through a non-blocking optical matrix switch located at the center, while a conventional modest-speed EPS-based network such as Ethernet is co-installed to function as another data plane as well as the control plane of the OCS network. We refer to queueing theory in order to understand the fundamental performances issues of OCS and packet switching, and show that the hybrid use of OCS and EPS is very preferable especially when the variance of file size is very large. Simulation results show that the hybrid configuration can significantly outperform a network based on OCS only.

In optical switching paradigm, there are three approaches; optical circuit switching, optical packet switching, and optical burst switching (OBS). OBS is a technology that takes the best features of packet switching and circuit switching by providing a flexible infrastructure for carrying IP traffic and at the same time ensuring efficient utilization of the fiber link. In this paper we propose an effective contention resolution scheme to achieve minimum burst loss at core nodes. Algorithm of zero burst loss for bimodal burst switching is extended from single node star network topology to two node star topology. Scheduling at the core node, typically an optical cross connect (OXC), is performed in two modes i.e., Mode 0 & Mode 1. Mode 0 is for burst transmission between all directly connected edge nodes whereas Mode 1 is for burst transmission through remote core node to a particular destination edge node. Synchronization of the reservation request between the core nodes is a critical task in such a topology. In order to achieve minimum burst loss, using a small length of fiber delay line in recirculation mode results in an effective strategy.

The great contributions in optical networks added the optical burst switching (OBS) networks that are outperforming in advance methods referred to as optical circuit switching and optical packet switching networks in the direction of switching and transmitting data through optical fibres. The critical and obligatory factors in OBS are assembling the bursts, routing, resource (such as transmission channels) scheduling, and burst segmenting for optimal transmission. Hence, the current research is focusing on these either of divergent factors of OBS and putting efforts to contribute optimal approaches to assemble, route, schedule or segment. In this paper, the segmentation scheme is investigated through simulation and it is shown that segmentation with void filling can achieve a significantly reduced burst loss rate.KeywordsOptical burst switchingBurst drop ratio