Classifying musical genres through deep learning and advanced audio analysis methods

Deep features generated from deep learning models contain more information for music classification than short-term features. This paper uses a long-short term memory (LSTM) model to generate deep features and achieve music genre classification. Firstly, two short-term features of Zero crossing rate (ZCR) and mel-frequency spectral coefficients (MFCC) are extracted from music in digital form, which is a time-domain feature and frequency-domain feature, respectively. Then these two features are fed to LSTM to generate deep features. Finally, we use support vector machine (SVM) and k-nearest neighbors (KNN) respectively to classify the music genre based on these deep features. Experimental results show that using LSTM can significantly increase the accuracy of music genre classification.

Music genre prediction is one of the topics that digital music processing is interested in. In this study, acoustic features of music have been extracted by using digital signal processing techniques and then music genre classification and music recommendations have been made by using machine learning methods. In addition, convolutional neural networks, which are deep learning methods, were used for genre classification and music recommendation and performance comparison of the obtained results has been. In the study, GTZAN database has been used and the highest success was obtained with the SVM algorithm.

Deep learning algorithms can be used to design systems that report data on patients and deliver warnings to medical applications or electronic health information if there are changes in the patient's health. These systems could be created using deep Learning. This helps verify that patients get the proper effective care at the proper time for each specific patient. A healthcare decision support system was presented using the Internet of Things and deep learning methods. In the proposed system, we examined the capability of integrating deep learning technology into automatic diagnosis and IoT capabilities for faster message exchange over the Internet. We have selected the suitable Neural Network structure (number of best-hidden layers and activation function classes) to construct the e-health system. In addition, the e-health system relied on data from doctors to understand the Neural Network. In the validation method, the total evaluation of the proposed healthcare system for diagnostics provides dependability under various patient conditions. Based on evaluation and simulation findings, a dual hidden layer of feed-forward NN and its neurons store the tanh function more effectively than other NN. To overcome challenges, this study will integrate artificial intelligence with IoT. This study aims to determine the NN's optimal layer counts and activation function variations.

Though large amounts of work with artificial intelligence are used in typhoon rainfall forecasting, the predictive skills of existing models are unsatisfactory. To address this problem, this study aims to propose an improved cluster‐wise typhoon rainfall forecasting model that integrates the grid‐search cross‐validation method with machine learning and deep learning (DL) models including support vector machine (SVM), random forest (RF), adaptive boosting (AdaBoost), convolutional neural network (CNN), and long short‐term memory (LSTM). Grid‐search cross‐validation is a modified parameterization technique that helps to find the best parameters for machine/DL models. In the first stage, a second‐order polynomial regression model was used to cluster the typhoon track; and in the second stage, cluster‐wise typhoon rainfall was recognized within a 500 km radius from each typhoon center. After that, a modified cluster‐wise typhoon rainfall forecasting model was proposed using cluster‐wise antecedent hourly typhoon rainfall within this distance for 1–6 hr lead time. Results show that the proposed model based on the SVM, RF, AdaBoost, CNN, and LSTM is capable of providing more accurate forecasts (the efficiency of the forecast is increased by 45%–90%) than the existing typhoon rainfall forecasting models that are based on SVM with a genetic algorithm, RF, artificial neural network, multilayer perceptron network, and deep neural network. Therefore, the current study recommends using cluster‐wise typhoon rainfall forecasting model with a grid‐search cross‐validation method for disaster prevention and mitigation.

Music Genre Classification (MGC) automatically categorizes music into different genres based on various musical attributes and features in a small number of music files. This is a crucial problem in the field of music information retrieval as it provides a way to organize and analyse large amounts of music files. MGC can be performed using conventional machine learning algorithms such as SVM, k-nearest neighbours, Decision trees, and neural networks. These algorithms learn to recognize different musical features and attributes to categorize the music files into different genres. The literature shows that the performance of conventional machine learning algorithms is inferior to deep learning algorithms such as CNN, RNN, etc., in various applications. Hence, the CNN algorithm is adapted to implement the classification of music files. This aims to classify music genres using CNN deep learning techniques. The performance of the algorithms for MGC can be evaluated using metrics such as accuracy, precision, recall, and F1-score. Additionally, the impact of different features and algorithms on the performance of MGC can be studied and compared. It has applications in areas such as automated music recommendation systems, music education, and music production. An accuracy of 83% is achieved by using CNN to accomplish the task of MGC.

In today's digital world, app stores have become an essential part of software distribution, providing customers with a wide range of applications and opportunities for software developers to showcase their work. This study elaborates on the importance of end-user feedback for software evolution. However, in the literature, more emphasis has been given to high-rating & popular software apps while ignoring comparatively low-rating apps. Therefore, the proposed approach focuses on end-user reviews collected from 64 low-rated apps representing 14 categories in the Amazon App Store. We critically analyze feedback from low-rating apps and developed a grounded theory to identify various concepts important for software evolution and improving its quality including user interface (UI) and user experience (UX), functionality and features, compatibility and device-specific, performance and stability, customer support and responsiveness and security and privacy issues. Then, using a grounded theory and content analysis approach, a novel research dataset is curated to evaluate the performance of baseline machine learning (ML), and state-of-the-art deep learning (DL) algorithms in automatically classifying end-user feedback into frequently occurring issues. Various natural language processing and feature engineering techniques are utilized for improving and optimizing the performance of ML and DL classifiers. Also, an experimental study comparing various ML and DL algorithms, including multinomial naive Bayes (MNB), logistic regression (LR), random forest (RF), multi-layer perception (MLP), k-nearest neighbors (KNN), AdaBoost, Voting, convolutional neural network (CNN), long short-term memory (LSTM), bidirectional long short term memory (BiLSTM), gated recurrent unit (GRU), bidirectional gated recurrent unit (BiGRU), and recurrent neural network (RNN) classifiers, achieved satisfactory results in classifying end-user feedback to commonly occurring issues. Whereas, MLP, RF, BiGRU, GRU, CNN, LSTM, and Classifiers achieved average accuracies of 94%, 94%, 92%, 91%, 90%, 89%, and 89%, respectively. We employed the SHAP approach to identify the critical features associated with each issue type to enhance the explainability of the classifiers. This research sheds light on areas needing improvement in low-rated apps and opens up new avenues for developers to improve software quality based on user feedback.

Wearable electroencephalography (EEG) devices for seizure detection accuracy and reliability are deep learning (DL) applications in the field of epilepsy diagnosis. In this study, we sought to increase the accuracy of seizure detection using advanced DL algorithms on the Children’s Hospital Boston - Massachusetts Institute of Technology (CHB-MIT) EEG database. First, a fully convolutional network (FCN) was trained and assessed using accuracy and recall/precision metrics, and the early stopping technique was used to avoid overfitting. To assess the performance, the FCN was evaluated in terms of various metrics, including accuracy, precision, recall, F1-score, and receiver operating characteristic (ROC)-area under the curve (AUC). In addition, two-dimensional (2D) convolutional neural networks (CNNs) and long short-term memory (LSTM) models were used to model the database, and their performance was thoroughly measured using different metrics, graphs, and confusion matrices. Using LSTM variants, such as standard LSTM, bidirectional LSTM, stacked LSTM, and LSTM attention mechanisms, hybrid convolutional LSTM (ConvLSTM) models were trained and compared. The comparison was conducted based on the training and validation accuracy and loss, as well as the graphs resulting from the precision–recall curves. Apart from DL approaches, EEG signal analysis using time–frequency techniques, such as wavelet transform and short-time Fourier transform, has also been investigated. These methods assisted in the analysis of the time–frequency features of EEG signals in combination with DL models. This study demonstrates that the performance of wearable EEG devices can be augmented using a combination of DL and seizure signal processing techniques. The FCN achieved an accuracy of 92%, with a recall for seizures of 33%, an F1-score of 0.03, and strong ROC-AUC results. The 2D CNN achieved 96% accuracy, a seizure recall of 70%, an F1-score of 0.12, and an ROC-AUC score of 78%. The baseline LSTM struggled with effectiveness at 53% accuracy with a seizure recall of 18%. In contrast, the LSTM model, which incorporated synthetic minority oversampling technique (SMOTE) balancing, was able to reach improvements of up to 89% accuracy, with a precision of 91%, a recall of 86%, an F1-score of 0.89, and a strong ROC curve performance. Among the models, the LSTM with SMOTE was the best performer, with 89% accuracy, 91% precision, 86% recall, and an F1-score of 0.89. These results provide evidence that applying techniques for data balancing in combination with certain DL network architectures significantly improves the detection of seizures using wearable EEG devices worn on the body. We believe that real-time monitoring and high-performance systems are feasible using optimized DL frameworks. The analysis of the performance of different models allows for the understanding of the possibilities of optimizing the architectures of DL algorithms for the modern diagnosis of epilepsy in real time. The source code used to carry out the experiments is publicly available at CHB-MIT EEG Dataset Python Scripts (https://www.kaggle.com/code/adnankust/adnaneeg1).

Time-history responses of the bridge induced by the moving vehicle provide crucial information for bridge design, operation, maintenance, etc. As inspired by this, this work attempts to provide a new paradigm for vehicle–bridge interaction (VBI) by highlighting the comparison of different deep learning algorithms applied to the prediction of time-history responses of the bridge under vehicular loads. Particularly, three deep learning architectures with few and measurable input features developed by using fully-connected feedforward neural network, long short-term memory (LSTM) network, and convolutional neural network (CNN) are proposed on the basis of the governing equation of bridge vibrations. Three VBI systems with various vehicle models are developed and further validated to produce reliable training data. To examine the accuracy of the predictive models, two advanced metrics are exploited for time-history estimate. Moreover, the proposed deep learning models are comprehensively investigated through a parametric study on the influential factors associated with the VBI system and network architecture. The results show that deep feedforward neural network (DFNN), LSTM network, and CNN can be applied in VBI analysis to estimate the bridge time-history response. The three neural networks have comparable prediction accuracies. When considering the irregularity excitation, CNN is found to be the most efficient predictive model, while DFNN needs the least training time under perfect bridge surface condition.

This study investigates the use of deep learning algorithms to predict the discharge coefficient (Cd) of contaminated multi-hole orifice flow meters with circular opening. Datasets (MHO1 and MHO2) were obtained from computational fluid dynamic simulations for two circular multi-hole orifice flow meters of different geometries. To evaluate the performance and generalization capabilities of different models, three distinct scenarios, each involving different dataset configurations and normalization techniques were designed. For each scenario, three deep learning models (feedforward neural networks, convolutional neural network, and recurrent neural network) were implemented and evaluated based on their performance metrics, including mean squared error (MSE), root mean squared error (RMSE), mean absolute error (MAE), and the coefficient of determination (R2). For all three scenarios eight models for each neural network model were developed (FFNN – four models, CNN – two models, RNN – two models). The same structure of models was used across all scenarios to ensure consistency in the evaluation process. Key input parameters include geometrical and flow variables such as β – parameter, contamination thickness, radial distance, Reynolds number, and orifice diameters. Results demonstrate the effectiveness of deep learning in accurately predicting discharge coefficient for different contamination conditions and different geometries. This study showed that deep learning models can be used for prediction of discharge coefficients for multi-hole orifice flow meters of similar geometry, based on data obtained from one orifice flow meter for different contamination parameters.

Sentiment Analysis of Self Driving Car Dataset: A comparative study of Deep Learning approaches

Emotion recognition (ER) is crucial for understanding human behaviours, social interactions, and psychological well-being. Electroencephalography (EEG) has emerged as a promising tool for capturing the neural correlates of emotions. This work is a systematic review of articles in ER using EEG signals. A total of 120 articles from 1041 articles were selected based on PRISMA guidelines using defined inclusion and exclusion criteria, published between 2018 and 2024. This article aims to provide an in-depth understanding of the current landscape of ER from EEG signals utilizing deep learning (DL). This review offers valuable guidance for researchers and practitioners seeking more refined and reliable emotion classification systems. To explore the effectiveness of DL models in EEG-based ER, several potential DL models, such as convolutional neural network, long short-term memory (LSTM), gated recurrent unit (GRU), hybrid bidirectional LSTM (BiLSTM), bidirectional GRU, and advanced DL models such as convolutional recurrent neural network and EEG-Conformer models are applied to two popular datasets, SEED and GAMEEMO, respectively, to depict the full process of ER. Additionally, the performance of DL models is also compared with the performance of basic machine learning (ML) models such as SVM, k-nearest neighbors, logistic regression, and boosting algorithms such as AdaBoost, XGBoost and LightGBM. Through extensive experiments and performance evaluations, the performance of different models when applied to the datasets mentioned above is compared. The accuracy, precision, recall, and F1-scores are analysed to determine the most effective model for EEG-based ER. The findings of this study demonstrate that the performance of hybrid DL models is more efficacious than that of ML models. The best-performing model (BiLSTM) classified the emotions, with an accuracy of 90.54% when applied to the GAMEEMO dataset. This research contributes to the growing body of literature on ER and provides insights into the feasibility of using EEG signals to understand emotional states, and presents a structured roadmap for future exploration. The findings can aid in the development of more accurate and reliable ER systems, which can have wide-ranging applications in psychology, social sciences, and human-computer interactions.

Sentiment analysis of news headlines is an important factor that investors consider when making investing decisions. We claim that the sentiment analysis of financial news headlines impacts stock market values. Hence financial news headline data are collected along with the stock market investment data for a period of time. Using Valence Aware Dictionary and Sentiment Reasoning (VADER) for sentiment analysis, the correlation between the stock market values and sentiments in news headlines is established. In our experiments, the data on stock market prices are collected from Yahoo Finance and Kaggle. Financial news headlines are collected from the Wall Street Journal, Washington Post, and Business-Standard website. To cope with such a massive volume of data and extract useful information, various embedding methods, such as Bag-of-words (BoW) and Term Frequency-Inverse Document Frequency (TF-IDF), are employed. These are then fed into machine learning models such as Naive Bayes and XGBoost as well as deep learning models such as Convolutional Neural Network (CNN) and Long Short-Term Memory (LSTM). Various natural language processing, andmachine and deep learning algorithms are considered in our study to achieve the desired outcomes and to attain superior accuracy than the current state-of-the-art. Our experimental study has shown that CNN (80.86%) and LSTM (84%) are the best performing models in relation to machine learning models, such as Support Vector Machine (SVM) (50.3%), Random Forest (67.93%), and Naive Bayes (59.79%). Moreover, two novel methods, BERT and RoBERTa, were applied with the expectation of better performance than all the other models, and they did exceptionally well by achieving an accuracy of 90% and 88%, respectively.

Historical information in the Canadian Maritime Judiciary increases with time because of the need to archive data to be utilized in case references and for later application when determining verdicts for similar cases. However, such data are typically stored in multiple systems, making its reachability technical. Utilizing technologies like deep learning and sentiment analysis provides chances to facilitate faster access to court records. Such practice enhances impartial verdicts, minimizing workloads for court employees, and decreases the time used in legal proceedings for claims during maritime contracts such as shipping disputes between parties. This paper seeks to develop a sentiment analysis framework that uses deep learning, distributed learning, and machine learning to improve access to statutes, laws, and cases used by maritime judges in making judgments to back their claims. The suggested approach uses deep learning models, including convolutional neural networks (CNNs), deep neural networks, long short-term memory (LSTM), and recurrent neural networks. It extracts court records having crucial sentiments or statements for maritime court verdicts. The suggested approach has been used successfully during sentiment analysis by emphasizing feature selection from a legal repository. The LSTM + CNN model has shown promising results in obtaining sentiments and records from multiple devices and sufficiently proposing practical guidance to judicial personnel regarding the regulations applicable to various situations.

Machine Learning (ML) technologies have been widely used for blind signal classification problem (Modulation Classification) to automatically identify the modulation schemes of Radio Frequency (RF) signal from complex- valued IQ (In-phase Quadrature) samples. Traditional ML methods usually have two stages where the first stage is to manually extract the features of the IQ symbols by subject matter experts and the second stage is to feed the features to an ML algorithm (e.g., a support vector machine) to develop the classifier. The state- of-art technology is to apply Deep Learning (DL) technologies such as Convolutional Neural Network (CNN) or Recurrent Neural Network (RNN) directly to the complex-value IQ symbols to train a multi-class classifier. In this effort we are focused on the modulation and coding rate classification problems for multi-carrier Orthogonal Frequency-Division Multiplexing (OFDM) signals. The generated OFDM data set consists of over 480k instances across four different modulations and three different coding rates which include BPSK + 1=2, BPSK+3=4, QPSK+1=2, QPSK+3=4, QAM16+1=2, QAM16+3=4, QAM64+2=3 and QAM64+3=4. Deep Learning (DL) models can successfully catch the features of OFDM modulations and identify the modulation scheme from the baseband IQ symbols. Four DL models including Residual Neural Network 34(Resnet34), Resnet18, Squeezenet and Long Short-Term Memory (LSTM) trained over the data set can achieve over 94% overall accuracy for signals across 􀀀10dB to 10dB with step size of 4dB. Among them, Squeezenet and LSTM models have much smaller model sizes which can be easily loaded in resource-limited edge computing platforms. To the best of our knowledge, coding rate classification of OFDM signals has not been studied in previous works. Therefore, three different DL models including a single-stage coding rate classifier, a combination of modulation and coding rate classifier, and a two-stage coding rate classifier are developed to identify the coding rate. However, coding rates can only be identified for low-order modulation schemes BPSK and QPSK but not for high-order modulation schemes QAM16 and QAM64. Further investigation is needed to understand the coding rate classification for high-order QAM signals.

Deep learning algorithm is an effective data mining method and has been used in many fields to solve practical problems. However, the deep learning algorithms often contain some hyper-parameters which may be continuous, integer, or mixed, and are often given based on experience but largely affect the effectiveness of activity recognition. In order to adapt to different hyper-parameter optimization problems, our improved Cuckoo Search(CS) algorithm is proposed to optimize the mixed hyper-parameters in deep learning algorithm. The algorithm optimizes the hyper-parameters in the deep learning model robustly, and intelligently selects the combination of integer type and continuous hyper-parameters that make the model optimal. Then, the mixed hyper-parameter in Convolutional Neural Network (CNN), Long-Short-Term Memory(LSTM) and CNN-LSTM are optimized based on the methodology on the smart home activity recognition datasets. Results show that the methodology can improve the performance of the deep learning model and whether we are experienced or not, we can get a better deep learning model using our method.