Compressed fuzzy logic based multi-criteria AODV routing in VANET environment

The integration of 5G and VANET will result in an intelligent transportation system. Relay of 5G data from mobile networks to VANET which is greatly underutilized can reduce the burden on mobile networks. Wireless technology has been used in vehicles or better known as the Vehicular Ad hoc Network (VANET). One of the keys to the success of sending data on VANET is the Path Selection Algorithm which is the task of the routing protocol. The routing protocol that is widely used in research in the VANET environment is AODV (Adhoc On-Demand Distance Vector), because among other protocols, AODV is the most suitable and suitable for implementation in the VANET environment, and AODV is also one of the reactive routing protocols. This study includes an increase in the performance of a routing protocol, so in this study, the SIN (Static Intersection Node) is added to the RSU (Road-Side Unit) which is located at an intersection. Which functions as a repeater that helps send data packets to other vehicles around it so that it can increase the Packet Delivery Ratio and minimize Packet Loss and End to End Delay. The focus of this research is to determine the most ideal Static Intersection Node position as well as the most effective number of Static Intersection Nodes.

In this paper, we propose Geographic Stateless Vehicular Ad Hoc Network (VANET) Routing (GeoSVR), a novel geographic routing protocol that selects an optimal forwarding route using the width of the road to avoid local maximum and improves the forwarding algorithm to ensure the connectivity of the route between two neighbors in an urban VANET. GeoSVR uses the natural connective feature of an urban map to calculate a forwarding route, the packets are forwarded along it and two modes in typical geographic routing protcols are eliminated. The salient features of optimal forwarding route, restricted forwarding algorithm and stateless routing, make GeoSVR suitable for high speeds and dynamical topologies. We showed that in line and urban scenarios, GeoSVR outperforms other wireless routing protocols such as Ad Hoc On Demand Distance Vector (AODV) and Greedy Perimeter Stateless Routing (GPSR). It significantly increases the packet delivery ratio. Although restricted forwarding algorithm brings more hops, GeoSVR's latency is almost not affected and is consistently lower than that of AODV.

Vehicular Ad Hoc Networks (VANET) are key to realizing Intelligent Transportation Systems (ITS). Although VANETs belong to the class of Mobile Ad Hoc Networks (MANET), and there are numerous routing protocols for MANETs, none of these protocols are applicable for VANETs. In particular, VANETs are highly dynamic due to high speed mobility of vehicles and traditional routing algorithms for MANETs cannot deal with such dynamicity of network nodes. Several comparative studies have suggested AODV (Ad hoc On-Demand Distance Vector), a well known MANET protocol that is adaptive to dynamic changes in network and makes efficient utilization of network resources, to be the best candidate for dealing with VANETs. However, verbatim adoption of AODV is not an efficient routing solution for VANETs. Recent works therefore proposed various modifications and/or additions to AODV to make it suitable for VANETs. It is particularly important to control congestion in VANETs by efficiently dealing with the AODV "Route Request" (RREQ) packets. In this paper, we propose Pro-AODV (Proactive AODV), a protocol that uses information from the AODV routing table to minimize congestion in VANETs, yet sustains other performance metrics at acceptable levels. The novelty and elegance in Pro-AODV comes from the fact that it does not require the execution of any additional logic, it is sufficient to know only the size of the routing table at each node.

Vehicular Ad-hoc Network (VANET) is a subclass of Mobile Ad-hoc Network (MANET) which provides the safety measure and other different applications to the drivers of the vehicles. The goal of VANET is to fulfil the requirements of users on roadside area, which improves the safe and comfortable journey. Secure routing is the main issue in VANET. Dynamic topology and wireless networking makes the VANET vulnerable to numerous sorts of attacks. Wormhole is one of the extreme assaults in VANET. This type of attack disturbs the working of routing protocol such as Ad hoc On demand Distance Vector (AODV) routing protocol. The motivation of this research work is that by using proposed detection and prevention approach the VANET can be made more secure. The results show how the performance of AODV routing protocol is affected by wormhole. In this research paper the impact of wormhole attack is analysed in terms of throughput, packer delivery ratio, and end-to-end delay. An approach is also proposed to detect and prevent wormhole attack in VANET over a real map on different vehicle densities based on multipath concept.

Vehicular Ad-hoc Networks (VANET) is a collection of communication vehicles, moving in a high speed in different directions. Thus vehicle’s connectivity problem is one of the interesting issues in VANETs. To resolve this problem the key mechanism in the VANET’s the routing protocol which is in charge of finding the shortest time and the route path. However, various routing protocols are implemented in a VANET environments, each having benefits and shortcoming to reducing the route breakages. The objective of this paper is to focus on the performance comparison of Three popular routing protocols such us Ad hoc On Demand Distance Vector Routing (AODV), Destination Sequenced Distance Vector (DSDV) and Adhoc on-demand multipath distance vector (AOMDV) on varying traffic environment. All the three protocols have been critically tested for different metrics such as Throughput, Packet Delivery Ratio Average End to end Delay and Energy consumption. Simulation is carried out with the help of open source simulation tools NS2 and SUMO a traffic simulator.

With the onset of multimedia applications, Quality of Service (QoS) in 802.11-based wireless ad hoc networks has been an essential area to look into. Standard wireless protocols such as IEEE 802.11b and IEEE 802.11e have been deemed unsuitable for multimedia traffic transmission in an ad hoc (multihop) network environment due to the unique network characteristics. As an ad hoc network is infrastructureless and distributed in nature, it gives rise to several challenges in QoS provisioning. In this thesis, we focus on the research of three key areas on QoS in ad hoc networks namely, buffer management in the medium access control (MAC) layer, cross-layer design and flow admission control. Firstly, we study MAC layer buffer management in the IEEE 802.11e protocol. The IEEE 802.11e MAC protocol provides QoS for multimedia traffic by probabilistic priority queueing. Ad hoc networks tend to generate a large volume of network control packets for route maintenance and these control packets are typically queued in the highest priority queue. As a result, higher priority control traffic is always being served, consuming most of the bandwidth and results in poor network performance for data traffic. We examine this problem and propose a dynamic buffer management scheme to mitigate it. By setting different threshold levels in different priority queues, we allow lower priority data traffic to be served when the higher priority control traffic is deemed to be excessive. Simulation of our proposed scheme has shown that our approach yielded better network performance compared to the standard protocol in terms of packet delivery ratio and average delay. Secondly, we study the cross-layer interaction between the MAC and Network layers to identify its impact on QoS. We select the IEEE 802.11e MAC protocol and Ad-hoc On Demand Distance Vector (AODV) routing protocol in our study since they are standardized protocols for wireless networks. In IEEE 802.11e MAC protocol, lower priority traffic has a higher probability of being blocked. Hence, the MAC layer will inform the Network layer of a broken link through the link notification function. In this case, AODV will re-route the paths that traverse this link. As a result, higher priority traffic which shares the same link as the lower priority traffic will undergo the same re-routing procedures. We termed this phenomenon path correlation effect. Under high traffic load, the path correlation effect will be more intense and hence degrade the QoS of higher priority traffic. To break the path correlation effect, we propose a cross-layer design called the Bundled Virtual Circuit (BVC). Our proposed BVC scheme not only addresses the path correlation issues, but also provides priority treatment from the Network layer to the MAC layer. Through our simulations, our proposed cross-layer design approach is proven to provide better network performance than the 802.11e/AODV protocols in terms of packet delivery ratio and delay. Finally, we examine flow admission control at the routing layer in ad hoc networks. Standard routing protocols such as AODV performs routing on a shortest path basis. In the presence of multiple routes, hotspots are likely to form among the intermediate nodes and thus lead to network congestion. In addition, existing routes are not well-protected from the introduction of new routes. We propose a flow admission control algorithm to be used with AODV. Our algorithm allows routes to be created through available bandwidth and congestion estimation. During the route discovery phase, each node will be gauged on its estimated available bandwidth and its backlog of packets in the MAC buffer. If a node does not have sufficient bandwidth, or has too many backlogged packets compared to the requested flow rate, it will not participate in the route discovery process. From simulations, our new scheme is able to provide better network performance than the standard AODV protocol in terms of delay. Our work in this thesis focuses on QoS provisioning in ad hoc networks from the MAC and network layer perspectives. By studying the network characteristics and protocols’ behavior, we investigate the various problems of providing QoS in an ad hoc network environment and propose three different schemes to improve the QoS provisioning at the MAC and network layers. We believe that our work is able to provide some insights to the research area on QoS in ad hoc networks.

The swift improvement of wireless communication technology has aided the creation of vehicular ad hoc networks (VANETs) as a revolutionary option for the realization of intelligent transportation systems (ITSs). VANETs facilitate seamless communication between vehicles and infrastructure (V2I) and among the vehicles themselves (V2V). These networks can enhance safety and traffic control while providing various infotainment options. To ensure stable and efficient communication in highly dynamic and quickly changing vehicular contexts, effective data packet routing is a crucial component of VANETs. This survey delves further into the VANET routing algorithms for ITS. The study aims to evaluate the effectiveness and acceptability of various routing protocols suggested for VANETs while considering their unique requirements and difficulties. The review covers ad hoc on‐demand distance vector (AODV) and dynamic source routing (DSR), as well as more current strategies designed specifically for VANETs, such as geographic routing, cluster‐based routing, and hybrid routing protocols. The review assesses the routing algorithms based on several vital parameters, including packet delivery ratio (PDR), end‐to‐end delay, throughput, network overhead, scalability, and robustness. This detailed assessment supports aspiring researchers in acquiring a better knowledge of the benefits and drawbacks of the routing algorithms currently used in VANETs.

Past few decades have witnessed large increase in number of vehicles on roads due to which the traffic safety needs have also become complex and hence necessary to be taken care of. Vehicular ad hoc networks (VANETs) are becoming an asset for achieving all these goals. VANETs provide applications like driver assistance, passenger comfort and vehicle safety. Apart from its general characteristics due to the dynamic nature of road environments and traffic patterns, communication linkage among vehicles in VANETs suffers breakage problem hence requires a very reliable routing protocol. To manage the communication efficiently many routing protocols are already available for MANETs which can be further used for routing and communication among vehicles in VANETs, but characteristics of these two networks (VANET and MANET) are very different, so there is requirement to enhance these MANET routing protocols so that those can be used in VANETs. When we use some existing routing protocols in VANET then number of link breakage are surprisingly high because mobility is higher in VANETs as compared to MANETs. So this paper presents advanced version of an existing MANET routing protocol for better performance in VANET environment. The new routing protocol has removed problem of large number of routing error messages which was existing in AODV routing protocol. Protocol proposed in this paper has better results as compared to AODV and paper has also shown results of simulation and also elaborated the findings.

Recently, special types of routing protocols are designed for sensor networks. Almost all of these routing protocols have considered the energy efficiency as the ultimate objective in order to maximize the lifetime of the whole network. The different types of routing protocols available in WSN are data centric, hierarchical, and location-based and on demand routing protocols. Low-Energy Adaptive Clustering Hierarchy (LEACH) protocol is one of the best hierarchical clustering protocols with probabilistic model to manage the energy consumption of WSN. However, LEACH uses global information without considering the local information i.e. the residual energy of each node for CH election process. Hence, Deterministic Energy-efficient Clustering protocol (DEC), a deterministic model is developed by using clustering scheme to manage and organize the WSN with mobile scenario. This protocol promises a better election of cluster-heads based on residual energy information and it is more energy efficient than LEACH protocols. Ad hoc on demand Distance Vector (AODV) is another routing protocol used in sensor network to support mobility. AODV is also on demand routing protocol. However, AODV do not provide multipath loop free and has link disjoint path. Hence, Ad hoc On-demand Multipath Distance Vector (AOMDV) is developed for WSN to guarantee loop freedom and disjointness of alternate paths. Frequent route discovery and route failure is occurred in AOMDV protocols due to the involvement of repeated mobile nodes without checking the energy levels of those nodes for packet transmission. To reduce the route failures occurred by the usage of nodes with reduced energy, energy aware ad hoc on-demand multipath distance vector routing protocol (E-AOMDV) is developed by incorporating energy aware concept in AOMDV protocol to increase the network performance. In this paper, the performance analysis namely residual energy of DEC protocol is examined for various packet length and nodes. Delivery ratio analysis of EAOMDV protocol is also done in this paper for various simulation times and nodes. The simulation results shows that DEC has better performance than LEACH and also E-AOMDV has better performance than AOMDV.

Intelligent Transportation System (ITS) is a critical factor for Vehicular Ad hoc Networks (VANET). Even though VANET belongs to the class of Mobile Ad hoc Network (MANET), none of the MANET routing protocol applies to VANET. VANET network is dynamic, due to increased vehicle speed and mobility. Vehicle mobility of VANET affects conventional routing algorithm performance, which deals with the dynamicity of the network node. The evaluation of the existing research stated that Ad hoc On-Demand Distance Vector (AODV) is an effective MANET protocol to adopt network changes for significant resource utilization and also provides effective adaptation in the network change. Due to the effective performance of the AODV protocol, it is considered as an effective routing protocol for VANET. This paper proposed an ad hoc TROPHY (TAD-HOC) routing protocol for the VANET network for increasing efficiency and effective resource utilization of the network. To improve the overall performance, ad hoc network is combined with Trustworthy VANET ROuting with grouP autHentication keYs (TROPHY) protocol. The proposed TAD-HOC protocol transmits data based on time demand in the VANET network with the desired authentication. Results of the proposed approach show the increased performance of the VANET network with packet delay, transmission range, and end-to-end delay. The comparative analysis of the proposed approach with I-AODV, AODV-R, and AODV-L shows that the proposed TAD-HOC exhibited effective performance.

Due to many challenging issues in vehicular ad-hoc networks (VANETs), such as high mobility and network instability, this has led to insecurity and vulnerability to attacks. Due to dynamic network topology changes and frequent network re-configuration, security is a major target in VANET research domains. VANETs have gained significant attention in the current wireless network scenario, due to their exclusive characteristics which are different from other wireless networks such as rapid link failure and high vehicle mobility. In this are, the authors present a Secured and Safety Protocol for VANET (STVAN), as an intelligent Ad-Hoc On Demand Distance Vector (AODV)-based routing mechanism that prevents the Denial of Service attack (DoS) and improves the quality of service for secured communications in a VANET. In order to build a STVAN, the authors have considered a smart traffic environment in a smart city and introduced the concept of load balancing over VANET vehicles in a best effort manner. Simulation results reveal that the proposed STVAN accomplishes enhanced performance when compared with other similar protocols in terms of reduced delay, better packet delivery ratio, reasonable energy efficiency, increased network throughput and decreased data drop compared to other similar approach.

Modelling and modular supervisory control for the AODV routing protocol

The Ad-hoc On Demand Distance Vector (AODV) is one of the most famed reactive routing protocols, which is used in Mobile Ad Hoc Networks (MANETs) for routing purposes, where the routes are built only when it is required. The AODV is related to the problem of route constructing and maintaining among any two-node in the presence of the dynamic topology of a network. High routing control packets, during route construction, is a limiting factor of AODV. Also, the route created during route discovery process may not be optimum (in terms of the number of hop counts between the originating and target node). The construction of non-optimal route arises from many reasons such as temporary congestion of one or more links in the short path to the target node, or nodes in those paths may contend the channel late, or the nodes may be busy for that moment to entertain other engagement. Moreover, during the route discovery phase, a large amount of unnecessary control packets may be generated which result in the debasement of the performance and the efficiency of the protocol by congesting the network and increasing the overhead. In this article the cases at which non-ideal routes are created and unimportant control packets generated during route discovery process will be identified. The modified AODV (AODV_MOD) with enhanced route discovery mechanism is proposed that will be used to avoid these cases by suppressing unimportant control packets and avoiding non-ideal routes formation. Simulation results, conducted in network simulator (NS2), prove the skillfulness of the proposed enhanced route discovery scheme from point of view of packet delivery ratio, endto-end delay, and normalized overhead.

In intelligent transportation systems, the collaboration between vehicles and the road side units is essential to bring these systems to realization. The emerging Vehicular Ad Hoc Network (VANET) is becoming more and more important as it provides intelligent transportation application, comfort, safety, entertainment for people in vehicles. In order to provide stable routes and to get good performance in VANET, there is a need of proper routing protocols must be designed. In this paper, we are working with the very well-known ad-hoc on-demand distance vector (AODV) routing protocol. The existing Routing protocol AODV-L which is based on the Link expiration time is extended to propose a more reliable AODV-AD which is based on multichannel MAC protocol. For the performance evaluation of routing protocols, a simulation tool ‘NS2’ has been used. Simulation results show that the proposed AODV-AD protocol can achieves better performances in forms of high Route stability, Packet Delivery ratio and packet loss rate than traditional AODV-L and traditional AODV.

<h2>Abstract</h2> <p><strong>Objective:</strong> The objective of this work is to enhance Adhoc On-demand Distance Vector (AODV) routing protocol for better communication through reliable routing scheme.<strong> Methods:</strong> In this paper, a reliable path selection algorithm is proposed to find the Most Reliable Path (MRP) between the source and destination vehicles. Reliable Path Ad-hoc On demand Distance Vector (RPAODV) is proposed for efficient route discovery in Vehicular Ad-hoc Network (VANET). The algorithm divide network into manageable group and it maintains Cluster Member (CM) updates handling, Cluster Head (CH) re-selection, Cluster merging. The efficient routing decisions would lead to better communication in VANET. It is made by assigning dynamic and static information appropriately to the variables in process. The dataset used is both static and dynamic which is efficient in when compared with existing protocols. <strong>Findings:</strong> The finding of most reliable path in the network of VANET is carried out by the proposed reliable path selection algorithm. The algorithm divides the network as various parts that comprise the information of clustering. The clustering is the mechanism of grouping of nodes into clusters. Clusters possess members and head. The cluster head would be the point of initiation of communication and any node can be re-selected as cluster head. The members of clusters would be updated as per changes in clustering mechanism. The uniqueness of the proposed algorithm revealed through easy identification of vehicles to form a cluster, cluster members maintenance, and fast data communication over the network. The proposed RPAODV adds the extra fields for RouteREQuest (RREQ) and RouteREPly (RREP) messages (CH and CM information). It also works out for static and dynamic topology in good manner by the implementation of modified AODV algorithm. The scalability is also taken care by enhancing topology variant. The performance of the algorithm is measured and analyzed with the existing protocols and posted in graphs. <strong>Novelty:</strong> The simulation results show that the proposed work outperforms 60% than the existing schemes works Cluster-based VANET-oriented Evolving Graph( CVoEG), Leapfrog-Anti-Colony Optimization(LP-ACO) in terms of route reliability (0.11s high), packet delivery ratio (20% high), end to end delay (0.5 saverage), and throughput (10 kbps high).</p> <p><strong>Keywords:</strong> VANET; Routing Protocol; RPAODV; Clustering; Reliable Routing; and Cluster message</p>