Constrained-based Multiple Sink Placement for Wireless Sensor Networks

Automatic localization is one of the major issues in Wireless Sensor Networks (WSN). DV-hop algorithm is a well-known localization algorithm in WSN but with limited localization accuracy. In this paper, an improved DV-hop localization algorithm in hybrid optical wireless sensor networks is proposed based on the optimization of the parameters in WSN. Various factors that affect the localization accuracy of the DV-hop algorithm in WSN are investigated, including the communication radius of the node, the number of beacon nodes and the number of the total nodes. As the DV-hop algorithm is applied into hybrid optical sensor and WSNs (O-WSN) with rectangular topology, different parameters have to be optimized accordingly. Simulation results show that the square topology outperforms the rectangle topology more than 45 % under the same network parameters using the improved DV-hop algorithm. Therefore another improved DV-hop called Sub-Square Weighted DV-hop (SSW DV-hop) is proposed for the rectangle topology. Both simulation and experiment results demonstrate that applying the SSW DV-hop algorithmin O-WSNs could significantly improve the localization accuracy.

Due to open network nature of wireless sensor networks make them highly vulnerable to a variety of security attacks and easy target for adversaries, which may capture these nodes, analyze and easily insert fake route information. Wireless sensor network is an emerging, cost effective and unsupervised solution for collecting this information from the physical world and sending this information back to centralized authority for further processing. GRPW (Geographic Routing in connected wireless sensor networks based on Multiple Sinks) is one of the basic routing protocols used for Supporting Mobile Sinks in Wireless Sensor Networks. GRPW, a geographical routing protocol for wireless sensor networks, is based on an architecture partitioned by logical levels, on the other hand based on a multipoint relaying flooding technique to reduce the number of topology broadcast. GRPW-MuS uses periodic HELLO packets to neighbor detection. The wormhole attack can form a serious threat in wireless sensor networks, especially against many wireless sensor networks routing protocols and location-based wireless security systems. Here, a trust model to handle this attack in GRPW is provided called GRPW-MuS-s. Using OMNET++ simulation and the MiXiM framework, results show that GRPW-MuS-s protocol only has very small false positives for wormhole detection during the neighbor discovery process (less than GRPW). The average energy usage at each node for GRPW-MuS-s protocol during the neighbor discovery and route discovery is very low than GRPW-MuS, which is much lower than the available energy at each node. The cost analysis shows that GRPW-MuS-s protocol only needs small memory usage at each node, which is suitable for the sensor network.

With rapid development of wireless communication, sensor, micro power system and electronic technology, the research on wireless sensor network has attracted more and more attention. The work proposed routing algorithm in wireless sensor network based on ant colony optimization by analyzing routing protocol and utilizing advanced idea. Ant colony optimization algorithm has advantages in implementing local work, supporting multiple paths and integrating link quality into pheromone formation. In routing selection, the work calculated probability that node is selected as the next hop according to pheromone concentration on the path. With characteristics including self-organization, dynamic and multipath, ant colony optimization algorithm is suitable for routing in wireless sensor network. With low routing cost, good adaptability and multipath, the algorithm balanced energy consumption to prolong network lifetime. In terms of simulation and experiments, ant colony algorithm was proved to be suitable for finding optimal routing in wireless sensor network, thus achieving design goal of routing algorithm.

Utilization of energy and the lifetime increment are the big issues in designing of routing algorithms for wireless sensor networks (WSNs). Many routing algorithms have been developed by various researchers to achieve energy efficiency and to improve the lifetime of the network. But, the way to route the information from the sensor node (SN) to the base station (BS) and vice versa is an important issue, because of resource constraints. In this paper, we have proposed a low energy consumed, cluster-based routing protocol named an energy-efficient and double cluster-head routing (EEDCR) protocol, to increase the network lifetime and minimize the end-to-end delay. Selection of the cluster head (CH) is depending on random selection method, energy method, the total number of nodes, and its energy level. The performances of developed protocol were assessed using simulations and found that it provides successful outcomes in terms of energy-efficient and lifetime increment in routing for WSNs.

In this study, the impact of route length on the performance of a routing protocol and flow admission control is analysed. First, the authors present an end‐to‐end available‐bandwidth‐based proactive routing protocol for ad‐hoc wireless sensor networks. The routing protocol maintains the best data forwarding path in terms of the end‐to‐end available bandwidth. Second, to determine the impact of route length on a routing protocol's performance, they modify the routing protocol. The modified available‐bandwidth‐based protocol trades‐off the end‐to‐end available bandwidth against the route length. Third, they integrate a state‐of‐the‐art flow admission control algorithm with the proposed protocols and a shortest hop‐count‐based protocol. Through simulations they evaluate the following: (i) performance of the proposed protocols and a state‐of‐the‐art available‐bandwidth‐based opportunistic protocol and (ii) the effectiveness of a state‐of‐the‐art flow admission control algorithm over proposed protocols and a shortest hop‐count‐based protocol. The simulation results demonstrate the following drawbacks of not considering the hop‐count metric: longer data forwarding paths, higher number of retransmissions, and reduced effectiveness of the admission control algorithm. The modified available‐bandwidth‐based proactive protocol provides the best overall performance. Therefore, using their results they conclude that route length impacts the performance of routing and flow admission control algorithms, but is not a singularly decisive factor.

Wireless Sensor Network (WSN) is an exceptional network which gather information from certain area of applications. Major factor in WSNs is the reliability for transmission of data from source to destination. Constructing path for multi-hop routing and continuous updates of energy level can maximize the lifetime and improve the reliability in the network. A lot of work has been done previously in this regard but previous schemes has limited network scale which consumes more energy in reconfiguration of paths and this energy consumption leads the reduction of network lifetime which results into early death of sensor nodes. In this regard, we propose Multi-hop Advance Heuristic Path-Reconfiguration Algorithm (HPRA) for clustered-based heterogeneous WSNs. Proposed algorithm adopts the opportunistic routing by choosing the appropriate neighbor node for transmission of data packets which improves the multi-hop reliability in order to improve the reliability in each path. This new technique of path-reconfiguration reduces the number of paths and fewer paths reduce energy dissipation and also improve the network lifetime. In simulation results proposed algorithm is compared with state-of-the-art routing protocols which shows the significant performance in network lifetime, network stability, number of paths and energy consumption ratio.

A Wireless Sensor Network (WSN) is an emerging technology for a wide range of potential applications, including the environmental monitoring, medical, and target tracking systems. A WSN comprises a set of sensor nodes deployed in an area of interest. Sensor nodes are normally located in a dense and ad hoc manner, communicating each other in a multi-hop fashion in order to collect, process, and relay data. Most of WSNs are built on wireless, battery-powered sensor nodes. In such networks, it is hard to recharge or replace the energy-depleted nodes due to the desolate or harsh environment of the target area. Therefore, the efficient use of limited energy is a primary concern in designing protocols and usage strategies for WSNs. In this work an emergency scenario is considered and a WSN is used to monitoring the emergency area. To limit the power consumption, the WSN is activated only when the emergency occurs. Moreover an integrated protocol for routing and localization is developed to reduce communication, which is the most power-consuming operation in WSNs.

Wireless Sensor Networks (WSNs) play a necessary position in todays actual world applications. WSNs are a team of autonomous sensor nodes that are geographically distributed to accumulate information and monitor events. WSNs are similarly sense that they rely on wireless connectivity and spontaneous formation of networks so that sensor information can be transported via wireless. Sometimes called dust network, minute sensors as small as dust referring to smart dust. WSNs are spatially distributed two to screen or bodily temperature, sound, pressure, etc. and to cooperatively ignore their data via the network to different locations. Each such sensor network node has typically various parts. Routing in WSNs in one of the important technique, because all node executes its battery power, if may be one node failure it collapse entire networks. Routing in WSNs is in reality difficult due to the intrinsic characteristics that differentiate these networks from different networks. The plan of routing protocols in WSN is affected via number of exigent factors. In this paper, a review on routing protocols for Wireless Sensor Networks (WSNs) and performance of its execution.

Energy conservation and fault tolerance are the most two important challenging issues for the development of large scale wireless sensor networks (WSNs). Failure of cluster heads in a cluster based WSN is more catastrophic as they are responsible not only for data aggregation and transmission of the aggregated data to the base station but also relaying data for multi-hop communication. Therefore, a routing algorithm in WSNs should be energy aware as well as fault tolerant. In this paper, we present a distributed energy efficient and fault tolerant routing algorithm for WSNs. The algorithm selects next-hop cluster head in energy efficient manner in the data routing phase and carefully restores the connectivity of the neighbours of a cluster head in case of its failure. The algorithm is tested extensively by considering several scenarios of WSN. The experimental results are compared with the existing algorithms in terms of several metrics to show the effectiveness of the proposed algorithm.

The extensive usage of wireless sensor networks (WSNs) has led to the development of many power- and energy-efficient routing protocols. Cooperative routing in WSNs can improve performance in these types of networks. In this paper we discuss the existing proposals and we propose a routing algorithm for wireless sensor networks called Power Efficient Location-based Cooperative Routing with Transmission Power-upper-limit (PELCR-TP). The algorithm is based on the principle of minimum link power and aims to take advantage of nodes cooperation to make the link work well in WSNs with a low transmission power. In the proposed scheme, with a determined transmission power upper limit, nodes find the most appropriate next nodes and single-relay nodes with the proposed algorithm. Moreover, this proposal subtly avoids non-working nodes, because we add a Bad nodes Avoidance Strategy (BAS). Simulation results show that the proposed algorithm with BAS can significantly improve the performance in reducing the overall link power, enhancing the transmission success rate and decreasing the retransmission rate.

Routing algorithms for large-scale sensor networks should be capable of finding energy efficient paths to prolong the lifetime of the networks in a decentralized manner. With this respect, Ant System has several proper characteristics for routing algorithm in large-scale wireless sensor networks. First, its distributed mechanism enables routing algorithm to find a solution with only local information and be robust for uncertainties in wireless sensor networks. Second, the framework of the Ant System is proper to solve dynamic problems such as routing problem. Transition probability in Ant System can be used to estimate how good a given routing path is. Capturing these features, this work proposes two Ant Systems based routing algorithms, which are AS-RWSNs (Ant System for Routing in Wireless Sensor Networks) and SAAS-RWSN (Structure-Aware AS-RWSN). The AS-RWSN applies the original Ant System to routing algorithm for wireless sensor network and SAAS-RSN upgrades AS-RWSN with considering properties of network structure such as degree of node. In SAAS-RSN, sensors with high node degree have high data traffic since they have more routing paths. Consequently, SAAS-RSN achieves an energy balance over sensor network through this routing scheme. We demonstrate the effectiveness of the proposed algorithms by comparing three existing routing algorithms.

The sensor nodes are independent and work as sender, receiver and intermediate node in Wireless Sensor Network (WSN). The sensor nodes are forming the small network in which the one or more sender is sending data to one destination/s through intermediate nodes or sending information to Base Station (BS). The information collect by base station is further analyzed. The nodes are also static or mobile depends on the situation or conditions. The connection establishment and data sending is possible through routing protocols of WSN. The routing protocols of WSN are not same as traditional wireless routing protocols. One major issue on this network is security. The routing protocols are sending information to destination from particular source and the routing strategy is provides the better way of delivery in the network. The sensor nodes in network are performing through limited battery supply called node energy or power. The attacker are also affected the limited energy resource. In this paper the center of consideration is on the security issues related to WSN routing protocols. The routing in WSN remains a key issue because of that without accurately functioning of routing protocols, the network cleanly will not work the technique it's intended to. Unfortunately, routing also one of the most difficult to protect against attacks malicious activities because of the administration in WSN. The better protection scheme is provides the complete security from attacks and the secure routing is provides the better and trustful network performance.

The development of various applications of wireless sensor networks has aroused great interest in using these types of networks in various fields. These networks, without infrastructure and self‐organization, are easily deployed in most environments and collect information about environmental phenomena for analysis and proper response to accidents and send them to the basic centers. They do. Wireless sensor networks are made up of some sensor nodes that both act as sensors and act as relay nodes concerning to each other. On the other hand, the lack of infrastructure in these networks has limited resources so that the nodes of the battery are fed with limited energy. Due to the location of networks in difficult and impassable areas, it is not possible to recharge or replace the node battery. Therefore, saving energy consumption in this type of network is one of the most important challenges. Since the rate of energy consumption when sensing information and receiving data packets from another node is a fixed value, so sensor nodes have the highest energy consumption when sending data. Therefore, routing methods try to reduce energy consumption based on systematic approaches. One of the most promising solutions to reduce energy consumption in wireless sensor networks is to cluster the nodes and select the threaded node based on the data transfer parameters so that the average energy consumption in the nodes is reduced and the network lifetime is increased. Therefore, in this research, a new optimization approach using multiobjective genetic algorithm and cuckoo algorithm for clustering wireless sensor networks is presented. In this study, in order to select clustered nodes from a multiobjective genetic algorithms based on reducing intracluster distances and reducing energy consumption in cluster member nodes and near‐optimal routing based on cuckoo optimization algorithm to transfer information between nodes have been used in the direction of the cavity. The implementation results show that considering the evolutionary capabilities of the multiobjective genetic algorithm and the cuckoo optimization algorithm, the proposed method in terms of energy consumption, efficiency, delivery rate, and packet transmission latency, compared to previous methods, has improved.

The technology of Heterogeneous Wireless Sensor Networks (HWSNs) is critical to the efficient operation and deployment of a variety of real-time Internet of Things (IoT) and Mobile Ad hoc Networks (MANETs). It is crucial for reducing overall energy dissipation and ensuring consistent energy distribution throughout the network. Bio-inspired hybrid optimization algorithms are emerging as a possible option for overcoming basic difficulties in Wireless Sensor Networks (WSNs), with a focus on sensor lifespan restrictions. A significant topic that must be considered prior to network configuration is attaining energy efficiency and optimal communication. Several papers have been published on the use of bio-inspired algorithms in WSNs. Few articles, however, addressed the hybrid strategy for routing and clustering in WSNs with communication. This research focuses on hybrid bio-inspired optimization algorithms and elaborates on their taxonomy and problem domains in WSNs. Furthermore, we explored and investigated the hybridization of the Whale Optimization Algorithm (WOA) with other meta-heuristic algorithms such as the Genetic Algorithm (GA), Ant Colony Optimization (ACO), Particle Swarm Optimization (PSO), and others. This review can assist researchers in exploring the uses of such algorithms within and outside of this study area.

Wireless sensor networks (WSNs) have been an emerging field in recent years. WSNs have major advantages in battlefields and emergency situations. However, due to the limited power of the sensor nodes, WSNs are restricted with their applications. The effective management of energy over the sensor nodes leads to good performance of the network. In this paper, we are proposing the energy-aware cluster head selection algorithm (ECHSA) for WSNs. The cluster head selection plays a major role in reducing the energy consumption of the cluster. To support our approach, the minimum energy transmission is proposed, and the simulation of the ECHSA is carried out with the NS-2 simulation. The results are compared with the sectored low energy adaptive cluster head (S-LEACH) and Theins algorithms. The results proved the efficiency of the proposed algorithm.