Convolutional neural network using generated data for SAR ATR with limited samples

Automatic target recognition (ATR) has made great progress with the development of deep learning. However, the target feature in synthetic aperture radar (SAR) image is not consistent with human vision, and the SAR training samples are always limited. These hard issues pose new challenges to the SAR ATR based on convolutional neural network (CNN). In this letter, we propose an improved CNN model to solve the limited sample issue via the feature augmentation and ensemble learning strategies. Normally, the high-level features that are more comprehensive and discriminative than the middle-level and low-level features are always employed for category discrimination. In order to make up the insufficient training features in the limited sample case, the cascaded features from optimally selected convolutional layers are concatenated to provide more comprehensive representation for the recognition. To take full advantage of these cascaded features, the ensemble learning-based classifier, namely, the AdaBoost rotation forest (RoF), is introduced to replace the original softmax layer to realize a more accurate limited sample recognition. Through the AdaBoost RoF method, not only are these features further enhanced by the rotation matrix but also a strong classifier is constructed by several weak classifiers with different adjusted weights. The experimental results on MSTAR data set show that the cascaded features and ensemble weak classifiers can fully exploit effective information in limited samples. Compared with the existing CNN method, the proposed method can improve the recognition accuracy by about 20% under the condition of ten training samples per class.

With the development of deep learning (DL) and synthetic aperture radar (SAR) imaging techniques, SAR automatic target recognition has come to a breakthrough. Numerous algorithms have been proposed and competitive results have been achieved in detecting different targets. However, due to the influence of various sizes and complex background of ships, detecting multiscale ships in SAR images is still challenging. To solve the problems, a novel network, called attention receptive pyramid network (ARPN), is proposed in this article. ARPN is a two-stage detector and designed to improve the performance of detecting multiscale ships in SAR images by enhancing the relationships among nonlocal features and refining information at different feature maps. Specifically, receptive fields block (RFB) and convolutional block attention module (CBAM) are employed and combined reasonably in attention receptive block to build a top-down fine-grained feature pyramid. RFB, composed of several branches of convolutional layers with specifically asymmetric kernel sizes and various dilation rates, is used for grabbing features of ships with large aspect ratios and enhancing local features with their global dependences. CBAM, which consists of channel and spatial attention mechanisms, is utilized to boost significant information and suppress interference caused by surroundings. To evaluate the effectiveness of ARPN, experiments are conducted on SAR Ship Detection Dataset and two large-scene SAR images. The detection results illustrate that competitive performance has been achieved by our method in comparison with several CNN-based algorithms, e.g., Faster-RCNN, RetinaNet, feature pyramid network, YOLOv3, Dense Attention Pyramid Network, Depth-wise Separable Convolutional Neural Network, High-Resolution Ship Detection Network, and Squeeze and Excitation Rank Faster-RCNN.

Lightweight ship detection is an important application of synthetic aperture radar (SAR). The prevailing trend in recent research involves employing a detection framework based on convolutional neural networks (CNNs) and horizontal bounding boxes (HBBs). However, CNNs with local receptive fields fall short in acquiring adequate contextual information and exhibit sensitivity to noise. Moreover, HBBs introduce significant interference from both the background and adjacent ships. To overcome these limitations, this paper proposes a lightweight transformer-based method for detecting arbitrarily oriented ships in SAR images, called LD-Det, which excels at promptly and accurately identifying rotating ship targets. First, light pyramid vision transformer (LightPVT) is introduced as a lightweight backbone network. Built upon PVT v2-B0-Li, it effectively captures the long-range dependencies of ships in SAR images. Subsequently, multi-scale deformable feature pyramid network (MDFPN) is constructed as a neck network, utilizing the multi-scale deformable convolution (MDC) module to adjust receptive field regions and extract ship features from SAR images more effectively. Lastly, shared deformable head (SDHead) is proposed as a head network, enhancing ship feature extraction with the combination of deformable convolution operations and a shared parameter structure design. Experimental evaluations on two publicly available datasets validate the efficacy of the proposed method. Notably, the proposed method achieves state-of-the-art detection performance when compared with other lightweight methods in detecting rotated targets.

Classical ship target classification algorithms in synthetic aperture radar (SAR) images mainly rely on manual extraction of simple physical features to distinguish different ship types. A novel multiscale dual-attention (MDA) based convolutional neural network (CNN) is proposed in this paper to highlight the deep distinguishable features extracted from SAR images for classification. First, we apply the data enhancement method to expand the limited labeled sample set to alleviate the defect of unbalanced dataset. Second, the squeeze-and-excitation(SE) block is adopted to learn the initial weight of the feature maps to mitigate the negative effects of large similarity between different ship classes. Third, the weighted feature maps are sent into two parallel self-attention blocks, and the semantic dependence on spatial dimension and channel dimension is modeled respectively. Feature fusion is carried out to further improve feature discrimination ability. The results of ablation experiments and comparative experiments on the open SAR ship dataset show that this method can mine deep discriminant features effectively, and further improve the classification accuracy of ships in SAR images compared with baseline method and other latest methods.

ABSTRACTAutomatic Target Recognition (ATR) based on Synthetic Aperture Radar (SAR) images plays a key role in military applications. However, there are difficulties with this traditional recognition method. Principally, it is a challenge to design robust features and classifiers for different SAR images. Although Convolutional Neural Networks (CNNs) are very successful in many image classification tasks, building a deep network with limited labeled data remains a problem. The topologies of CNNs like the fully connected structure will lead to redundant parameters and the negligence of channel-wise information flow. A novel CNNs approach, called Group Squeeze Excitation Sparsely Connected Convolutional Networks (GSESCNNs), is therefore proposed as a solution. The group squeeze excitation performs dynamic channel-wise feature recalibration with less parameters than squeeze excitation. Sparsely connected convolutional networks are a more efficient way to operate the concatenation of feature maps from different layers. Experimental results on Moving and Stationary Target Acquisition and Recognition (MSTAR) SAR images, demonstrate that this approach achieves, at 99.79%, the best prediction accuracy, outperforming the most common skip connection models, such as Residual Networks and Densely Connected Convolutional Networks, as well as other methods reported in the MSTAR dataset.

Convolutional neural network(CNN) has achieved great success in optical image recogniton, and has been applied in research of synthetic aperture radar(SAR) automatic target recognition(ATR) recently. However, in real SAR systems, SAR images are usually compressed for transmission due to the limited wireless bandwidth, and few researches have evaluated the influence of image compression on SAR ATR task. In this paper, an efficient CNN architecture based on inception module and batch normalization layer is proposed for SAR ATR tasks, and the impact of image compression on SAR ATR is evaluated based on the proposed model. The experiments are based on MSTAR dataset, and the test images are compressed by Set Partitioning in Hierarchical Trees(SPIHT) algorithm with different compression ratio. Experimental results show that the proposed CNN model achieves a state-of-the-art classification accuracy of 99.29% on original MSTAR dataset, and can still get high classification accuracy above 90% even SAR images in test set are compressed by nearly one hundred times, which reveals that moderate compression of SAR images has little influence on SAR ATR tasks, and this validates the practicability of applying the proposed model to real SAR ATR systems.

This paper proposes an automatic target recognition (ATR) method for synthetic aperture radar (SAR) images based on information-decoupled representation. A typical SAR image of a ground target can be divided into three parts: target region, shadow and background. From the aspect of SAR target recognition, the target region and shadow contain discriminative information. However, they also include some confusing information because of the similarities of different targets. The background mainly contains redundant information, which has little contribution to the target recognition. Because the target segmentation may impair the discriminative information in the target region, the relatively simpler shadow segmentation is performed to separate the shadow region for information decoupling. Then, the information-decoupled representations are generated, i.e., the target image, shadow and original image. The background is retained in the target image, which represents the coupling of target backscattering and background. The original image and generated target image are classified using the sparse representation-based classification (SRC). Then, their classification results are combined by a score-level fusion for target recognition. The shadow image is not used because of its lower discriminability and possible segmentation errors. To evaluate the performance of the proposed method, extensive experiments are conducted on the Moving and Stationary Target Acquisition and Recognition (MSTAR) dataset under both standard operating condition (SOC) and various extended operating conditions (EOCs). The proposed method can correctly classify 10 classes of targets with the percentage of correct classification (PCC) of 94.88% under SOC. With the PCCs of 93.15% and 75.03% under configuration variance and 45° depression angle, respectively, the superiority of the proposed is demonstrated in comparison with other methods. The robustness of the proposed method to both uniform and nonuniform shadow segmentation errors is validated with the PCCs over 93%. Moreover, with the maximum average precision of 0.9580, the proposed method is more effective than the reference methods on outlier rejection.

Synthetic aperture radar (SAR) are high resolution imaging radar systems. In many SAR applications classifying objects that are detected within the SAR image is important. In this paper an approach is proposed to tackle the Synthetic SAR Automatic Target Recognition (ATR) problem. The proposed scheme is based on a transfer leaning approach where three different pre-trained Convolutional Neural Networks (CNNs) are used as feature extractors in combination with a Support Vector Machine classifier (SVM). The CNNs used in this paper are AlexNet, VGG16 and GoogLeNet. The performance of these three CNNs is compared in regards to the SAR-ATR problem; where it is observed that AlexNet gives the best performance accuracy of 99.27%.

A synthetic aperture radar (SAR) automatic target recognition can effectively improve the utilization efficiency of SAR image data. In order to improve the generalization and accuracy of SAR image target recognition, a convolutional neural network model is proposed to be applied to SAR image target recognition. Firstly, the network structure is designed for the characteristics of SAR image. Secondly, the introduction of dense block network structure improves the generalization performance of the model. Finally, Dropout reduced the computational complexity of the network and improved the generalization performance of the model. Experimental data were obtained from the United States Moving and Stationary Target Acquisition and recognition database. Experimental results of 10 types of target recognition showed that the overall recognition rate of the improved convolutional neural network is 99.18%. The convolutional neural network model proposed in this study improves the accuracy and generalization of the network, and is an effective method for target recognition of SAR images.

In light of recent advances in deep learning and Synthetic Aperture Radar (SAR) technology, there has been a growing adoption of ship detection models that are based on deep learning methodologies. However, the efficiency of SAR ship detection models is significantly impacted by complex backgrounds, noise, and multi-scale ships (the number of pixels occupied by ships in SAR images varies significantly). To address the aforementioned issues, this research proposes a Pyramid Pooling Attention Network (PPA-Net) for SAR multi-scale ship detection. Firstly, a Pyramid Pooled Attention Module (PPAM) is designed to alleviate the influence of background noise on ship detection while its parallel component favors the processing of multiple ship sizes. Different from the previous attention module, the PPAM module can better suppress the background noise in SAR images because it considers the saliency of ships in SAR images. Secondly, an Adaptive Feature Balancing Module (AFBM) is developed, which can automatically balance the conflict between ship semantic information and location information. Finally, the detection capabilities of the ship detection model for multi-scale ships are further improved by introducing the Atrous Spatial Pyramid Pooling (ASPP) module. This innovative module enhances the detection model’s ability to detect ships of varying scales by extracting features from multiple scales using atrous convolutions and spatial pyramid pooling. PPA-Net achieved detection accuracies of 95.19% and 89.27% on the High-Resolution SAR Images Dataset (HRSID) and the SAR Ship Detection Dataset (SSDD), respectively. The experimental results demonstrate that PPA-Net outperforms other ship detection models.

The purpose of the paper is to extract the region of interest (ROI) from the coarse detected synthetic aperture radar (SAR) images and discriminate if the RO I contains a target or not, so as to eliminate the false alarm, and prepare for the target recognition. Th e automatic target clustering is one of the most difficult tasks in the SAR-image automatic target recognition system. The density-based spatial clustering of applications with noise (DBSCAN) relies on a density-based notion of clusters which is designed to discover clusters of arbitrary shape. DBSCAN was first used in the SAR image processing, which has many excellent features: only two insensitivity parameters (radius of neighborhood and minimum number of points) are needed; clusters of arbitrary shapes which fit in with the coarse detected SAR images can be discovered; and the cal culation time and memory can be reduced. In the multi-feature ROI discrimination scheme, we extract several target features which contain the geometry features such asthe area discriminator and Radon -transform based target profile discriminator, the distribution characteristics such as the EFF discrimina tor, and the EM scattering property such as the PPR discriminator. The synthesized judgment effectively eliminates the false alarms. Keywords: automatic target recognition, synthetic aperture radar images,

Automatic target recognition has been one of the hottest research in synthetic aperture radar (SAR) data processing. Noticing that popular recognition methods cannot utilize multiple features of SAR complex data, a method fused scattering center feature and deep convolutional neural network (CNN) feature is proposed in this letter. This method contains three key parts, namely, scattering center extraction and reconstruction block, CNN feature extraction block, and final feature fusion and classification block. In this process, the scattering center feature and CNN feature are fused at the level of feature maps, which retain the space information of 2-D feature maps. What is more, the proposed half end-to-end strategy realizes the automatic update of weighting parameters in feature extraction network and subnetwork, which promotes a better recognition efficiency. Experimental results on measured SAR data show that the proposed method can achieve better accuracy than other single feature-based methods and feature fusion methods.

Synthetic aperture radar (SAR) automatic target recognition is an important application in SAR. How to extract features has restricted the application of SAR technology seriously. In this paper, a new feature extraction method for SAR automatic target recognition based on maximum interclass distance is proposed, which integrates class and neighborhood information. This method can reinforce discriminative power using maximum interclass distance, so it can improve recognition rate effectively.

In recent years, convolutional neural network (CNN) has been increasingly considered as a promising technology for military and homeland security applications. The fusion of CNN and Support vector machine (SVM), a popular traditional machine learning approach, has received intensive attention in the field of synthetic aperture radar (SAR) automatic target recognition (ATR). This paper, firstly, discusses the effects of some preprocessing and image enhancement methods on the performance of SAR ATR, starting with the pre-trained AlexNet in a transfer-learning based approach. Secondly, the architecture of AlexNet is modified to form a new model suitable for SAR ATR. Finally, we propose a hybrid model associated with the success of the learning feature of our CNN model and the ability of SVM to process high-dimensional dataset effectively. To evaluate the proposed method, experiments are performed on the Moving and Stationary Target Acquisition and Recognition (MSTAR) public database. The comparative results demonstrate that these preprocessing and enhancement methods prior to the deep-learning process are not necessary since the feature representation ability of AlexNet is already powerful. Furthermore, experimental results on the benchmark MSTAR dataset illustrate the effectiveness of the proposed new model. On classification of ten-class targets, the commonly used translation augmentation for training data has been performed. By combining the CNN and SVM, the classification accuracy percentages can be slightly improved for our proposed new model.

Convolutional Neural Network (CNN) has shown great potential for structural information extraction, however, Synthetic Aperture Radar (SAR) image interpretation via CNN, is still a challenging task due to the pixel- to- pixel variation nature of SAR signal. In this paper, a pattern strengthened deep model for SAR image classification is presented. The main idea underlying this method is to strengthen (or sharpen) the salient patterns contained in SAR image while attenuate the random variation, so as to leverage the enormous potential of deep model. To achieve this goal, max pooling is elaborately designed to form a pattern strengthened deep model. The experimental results on two SAR datasets show that the proposed method increases the classification accuracy by 4.91% and 4.64% compared with the typical CNN, and indicate our innovative attempt is promising for SAR image classification in the case of limited training data.