Coupled Graph Convolutional Neural Networks for Text-Oriented Clinical Diagnosis Inference

Graph convolutional network – Long short term memory neural network- multi layer perceptron- Gaussian progress regression model: A new deep learning model for predicting ozone concertation

Traffic flow prediction plays an important role in intelligent transportation systems and is of great significance in the applications of traffic control and urban planning. Due to the complexity of road traffic flow data, traffic flow prediction has been one of the challenging tasks to fully exploit the spatiotemporal characteristics of roads to improve prediction accuracy. In this study, a combined flow direction level traffic flow prediction graph convolutional network (GCN) and long short-term memory (LSTM) model based on spatiotemporal characteristics is proposed. First, a GCN model is employed to capture the topological structure of the data graph and extract the spatial features of road networks. Additionally, due to the capability to handle long-term dependencies, the long-term memory is used to predict the time series of traffic flow and extract the time features. The proposed model is evaluated using real-world data, which are obtained from the intersection of Liuquan Road and Zhongrun Avenue in the Zibo High-Tech Zone of China. The results show that the developed combined GCN-LSTM flow direction level traffic flow prediction model can perform better than the single models of the LSTM model and GCN model, and the combined ARIMA-LSTM model in traffic flow has a strong spatiotemporal correlation.

Skeleton-based action recognition aims to project skeleton sequences to action categories, where skeleton sequences are derived from multiple forms of pre-detected points. Compared with earlier methods that focus on exploring single-form skeletons via Graph Convolutional Networks (GCNs), existing methods tend to improve GCNs by leveraging multi-form skeletons due to their complementary cues. However, these methods (either adapting structure of GCNs or model ensemble) require the co-existence of all forms of skeletons during both training and inference stages, while a typical situation in real life is the existence of only partial forms for inference. To tackle this issue, we present Adaptive Cross-Form Learning (ACFL), which empowers well-designed GCNs to generate complementary representation from single-form skeletons without changing model capacity. Specifically, each GCN model in ACFL not only learns action representation from the single-form skeletons, but also adaptively mimics useful representations derived from other forms of skeletons. In this way, each GCN can learn how to strengthen what has been learned, thus exploiting model potential and facilitating action recognition as well. Extensive experiments conducted on three challenging benchmarks, i.e., NTU-RGB+D 120, NTU-RGB+D 60 and UAV-Human, demonstrate the effectiveness and generalizability of the proposed method. Specifically, the ACFL significantly improves various GCN models (i.e., CTR-GCN, MS-G3D, and Shift-GCN), achieving a new record for skeleton-based action recognition.

Geometric deep learning provides a principled and universal way for the integration of imaging and non-imaging modes in the medical field. Graph Convolutional Networks (GCNs) have been widely explored in a variety of problems, such as disease prediction, segmentation, and matrix completion. Using large, multi-modal data sets, graphs can capture the interaction of individual elements represented as nodes in the graphs. In particular, in medical applications, nodes can represent individuals (patients or healthy controls) in a potentially large population and are accompanied by a set of features, while the edges of the graph contain the associations between subjects in an intuitive way. This representation allows the inclusion of rich imaging and non-imaging information as well as individual subject characteristics in the task of disease classification. This article gives an overview of graph convolutional neural networks, focusing on the application of graph convolutional neural networks in disease prediction, and discusses the challenges and prospects of graph convolutional neural networks in disease prediction.

Chronic obstructive pulmonary disease (COPD) is a common disease with high morbidity and mortality, where early detection benefits the population. However, the early diagnosis rate of COPD is low due to the absence or slight early symptoms. In this paper, a novel method based on graph convolution network (GCN) for early detection of COPD is proposed, which uses small and weakly labeled chest computed tomography image data from the publicly available Danish Lung Cancer Screening Trial database. The key idea is to construct a graph using regions of interest randomly selected from the segmented lung parenchyma and then input it into the GCN model for COPD detection. In this way, the model can not only extract the feature information of each region of interest but also the topological structure information between regions of interest, that is, graph structure information. The proposed GCN model achieves an acceptable performance with an accuracy of 0.77 and an area under a curve of 0.81, which is higher than the previous studies on the same dataset. GCN model also outperforms several state-of-the-art methods trained at the same time. As far as we know, it is also the first time using the GCN model on this dataset for COPD detection.Graphical abstract

Exploring the optimization of communication strategies for animation films in the context of cross-cultural communication, this research integrates the Internet of Things (IoT) and convolutional networks. The research constructs a collaborative filtering (CF) movie recommendation model based on a graph convolutional neural network (GCN) and investigates its application in cross-cultural communication. The fusion of IoT and convolutional networks in movie communication is also analyzed, and the effectiveness of the proposed GCN-CF model is validated through comparative experiments. The results indicate that, compared to other models, the GCN-CF model achieves the lowest Root Mean Square Error (RMSE) on the MovieLens 100 K and MovieLens 1 M datasets, with values of 0.8762 and 0.8275, respectively. Compared to traditional models, the GCN-CF model exhibits significantly superior performance in terms of RMSE, with reductions ranging from 0.6 to 5.2%, highlighting its heightened detection accuracy and overall performance. Moreover, the performance of the GCN-CF model is enhanced after introducing attention mechanisms and auxiliary information on both datasets, showing an improvement of 0.4% compared to the scenario without these additions. This data demonstrates the effectiveness of attention mechanisms and auxiliary information. Finally, the research presents an animation film communication strategy based on IoT and convolutional networks, offering novel insights for film production and communication, along with positive implications for cultural exchange and the advancement of the global media industry.

Multimodal emotion recognition in conversation (MERC) involves predicting the emotion category of a conversation on the basis of textual, acoustic, and visual modalities. Information from these diverse modalities can reinforce each other to enhance the accuracy of emotion prediction. However, some information modalities may be absent in real-world applications and information from various modalities may be difficult to integrate. Therefore, a suitable strategy is required to compensate for missing modalities by using information from the available modalities and prioritizing important information. Consequently, this study developed a graph convolutional network (GCN) model with a feature compensation module and dual-channel second-order pooling module for MERC. This model initially uses a GCN to compensate for missing features by aggregating features corresponding to the same utterance node. Subsequently, it applies dual-channel second-order pooling to sift through and integrate all features. Empirical evaluations of the proposed model against other baseline models on two benchmark datasets, namely the IEMOCAP and MELD datasets, indicated that the proposed model outperformed the other models; this finding underscores the effectiveness of the proposed model in recognizing the emotions expressed in multimodal dialogue data.

ABSTRACTLarge‐area, high‐resolution organic light‐emitting diode (OLED) displays require high‐performance oxide thin‐film transistors (TFTs) with excellent mobility and stability, as well as little threshold voltage shift, especially for G8.5+ OLED production lines. Our previous work demonstrated rare‐earth doped oxides are ideal channel layer materials for TFTs due to their superior mobility and stability. However, scaling up TFT production from pilot lines to mass manufacturing poses significant challenges, largely because of the complexity of multi‐element composite materials and intricate processes. In this study, an end‐to‐end graph convolutional network (GCN) model is employed to optimize TFT production processes. By encoding process parameters as graph nodes and features, the GCN effectively predicts critical drain current–gate voltage (I–V) characteristics, enabling precise calculation of electron mobility, subthreshold slope, and threshold voltage. The model achieves a mean absolute percentage error of 19.9% on validation data. Based on the optimized parameters, a TFT device with properties including a mobility of 37.8 cm2/Vs, a threshold voltage of 0.9 V, and a subthreshold slope of 0.62 V/dec was successfully produced. These results highlight the potential of GCN‐based models to address the complexities of TFT mass production, providing a powerful tool for process optimization and performance enhancement.

Exploiting node-feature bipartite graph in graph convolutional networks

miRNAs are important regulators for many crucial biological processes. Many recent studies have shown that miRNAs are closely related to various human diseases and can be potential biomarkers or therapeutic targets for some diseases, such as cancers. Therefore, accurately predicting miRNA-disease associations is of great importance for understanding and curing diseases. However, how to efficiently utilize the characteristics of miRNAs and diseases and the information on known miRNA-disease associations for prediction is still not fully explored. In this study, we propose a novel computational method for predicting miRNA-disease associations. The proposed method combines the graph convolutional network and the hypergraph convolutional network. The graph convolutional network is utilized to extract the information from miRNA-similarity data as well as disease-similarity data. Based on the representations of miRNAs and diseases learned by the graph convolutional network, we further use the hypergraph convolutional network to capture the complex high-order interactions in the known miRNA-disease associations. We conduct comprehensive experiments with different datasets and predictive tasks. The results show that the proposed method consistently outperforms several other state-of-the-art methods. We also discuss the influence of hyper-parameters and model structures on the performance of our method. Some case studies also demonstrate that the predictive results of the method can be verified by independent experiments.

Video-based human action recognition is one of the most important and challenging areas of research in the field of computer vision. Human action recognition has found many pragmatic applications in video surveillance, human-computer interaction, entertainment, autonomous driving, etc. Owing to the recent development of deep learning methods for human action recognition, the performance of action recognition has significantly enhanced for challenging datasets. Deep learning techniques are mainly used for recognizing actions in images and videos comprising of Euclidean data. A recent development in deep learning methods is the extension of these techniques to non-Euclidean data or graph data with many nodes and edges. Human body skeleton resembles a graph, therefore, the graph convolutional network (GCN) is applicable to the non-Euclidean body skeleton. In the past few years, GCN has emerged as an important tool for skeleton-based action recognition. Therefore, we conduct a survey using GCN methods for action recognition. Herein, we present a comprehensive overview of recent GCN techniques for action recognition, propose a taxonomy for the categorization of GCN techniques for action recognition, carry out a detailed study of the benchmark datasets, enlist relevant resources and open-source codes, and finally provide an outline for future research directions and trends. To the best of authors' knowledge, this is the first survey for action recognition using GCN techniques.

Entity linking, which maps named entity mentions in a document into the proper entities in a given knowledge graph, has been shown to be able to significantly benefit from modeling the entity relatedness through Graph Convolutional Networks (GCN). Nevertheless, existing GCN entity linking models fail to take into account the fact that the structured graph for a set of entities not only depends on the contextual information of the given document but also adaptively changes on different aggregation layers of the GCN, resulting in insufficiency in terms of capturing the structural information among entities. In this paper, we propose a dynamic GCN architecture to effectively cope with this challenge. The graph structure in our model is dynamically computed and modified during training. Through aggregating knowledge from dynamically linked nodes, our GCN model can collectively identify the entity mappings between the document and the knowledge graph, and efficiently capture the topical coherence among various entity mentions in the entire document. Empirical studies on benchmark entity linking data sets confirm the superior performance of our proposed strategy and the benefits of the dynamic graph structure.

LightGCAN: A lightweight graph convolutional attention network for user preference modeling and personalized recommendation

Automatic building extraction from optical imagery remains a challenge due to, for example, the complexity of building shapes. Semantic segmentation is an efficient approach for this task. The latest development in deep convolutional neural networks (DCNNs) has made accurate pixel-level classification tasks possible. Yet one central issue remains: the precise delineation of boundaries. Deep architectures generally fail to produce fine-grained segmentation with accurate boundaries due to their progressive down-sampling. Hence, we introduce a generic framework to overcome the issue, integrating the graph convolutional network (GCN) and deep structured feature embedding (DSFE) into an end-to-end workflow. Furthermore, instead of using a classic graph convolutional neural network, we propose a gated graph convolutional network, which enables the refinement of weak and coarse semantic predictions to generate sharp borders and fine-grained pixel-level classification. Taking the semantic segmentation of building footprints as a practical example, we compared different feature embedding architectures and graph neural networks. Our proposed framework with the new GCN architecture outperforms state-of-the-art approaches. Although our main task in this work is building footprint extraction, the proposed method can be generally applied to other binary or multi-label segmentation tasks.

Cross-subject emotion recognition in brain-computer interface based on frequency band attention graph convolutional adversarial neural networks