Creating Simple and Effective Prerecorded Web‐Based Lectures

Microcomputer memory performance in a resource sharing distributed information processing environment

Statistical cartography, the production of statistical maps, has been widely used in fields such as medicine, geophysics, criminology, linguistics, and biology to address questions concerning the spatial distribution of phenomena. Recent advances in computer hardware and software have made it possible to produce statistical maps rapidly and economically. Few applications of the methodology in special ecuation research and planning have yet surfaced, however. The article describes the basic methods and procedures of computerized statistical cartography and provides several suggestions for its application in special education research and planning, both state and national. A study of regional low-incidence handicap service patterns is presented. Included are examples of special education service maps produced by computer.

Photogrammetry is a significant tool museums utilize to produce high-quality 3D models for research and exhibit content. As advancements in computer hardware and software continue, it is crucial to assess the effectiveness of photogrammetry software in producing research-quality 3D models. This study evaluates the efficacy of Apple’s Object Capture photogrammetry API to create high-quality 3D models. The results indicate that Object Capture is a viable option to create research-quality models efficiently for a variety of natural and cultural heritage objects. Object Capture is notable for its minimal need for masking backgrounds within images and its ability to create models with fewer than 100 images and process 3D models in under 10 minutes.

Design and analysis of products and structures is changing quickly with advances in computer hardware and software. In most industries there is a demand to continuously shorten the time for product development while increasing quality at the same time. It would be an advantage also for the joinery industry to increase the use of computer-aided engineering tools when developing wood products, but wood is a more complex and variable material and needs more concern than a homogeneous, isotropic material such as steel. In this study a finite element analysis of a wooden spiral staircase was compared to the results from a full-scale test. Displacements were measured for different load configurations. Finite element calculations were performed with a linear elastic model with solid elements and simplified modeling of the joints. Finite element calculations and tests showed that the simplified solid model was stiffer than the real staircase. The conclusions are that for this kind of structure, a more detailed model including the non-linear behavior of joints is needed, and more detailed studies of the wood joints and supports are necessary.

Cloth modeling and simulation has gained significant momentum in recent years due to advances in computational hardware and software. Cloth plays an important role not only in daily life, but also in special scenarios such as firefighter’s cloth and space suits. There are special requirements such as protection capability of the human body and mobility after the firefighters or astronauts wear the special cloth. Traditional assessment of cloth is to have prototypes first and have experiments by subjective rating. This is time consuming and expensive. Virtual cloth modeling and simulation provides a means to demonstrate and assess its performance before cloth is made. This paper attempts to give a literature review to summarize the state-of-the-art of cloth modeling and simulation.KeywordsCloth modeling and simulationfinite element methodcomfort

Acute myeloid leukemia and artificial intelligence, algorithms and new scores

Simulation Validation and ManagementJohn D. IligenIligen Simulation Technologies, Inc.250 Storke RoadSuite 10Goleta, California 93117jillgen@illgen.comABSTRACTThe past several years have seen many technological advances in both computer hardware and software. Computer hardwareis becoming very complex. Computer hardware and software have virtually taken over every aspect of our lives, both in thehome and in the workplace. The government is looking at computer modeling and simulation (MIS) as a way of predictingcomplex system behavior without having to construct expensive prototypes or conduct extensive field tests. Decision makersare demanding that the use of M/S be made an integral part of any major system acquisition.As the use of computer software increases, there has been a concomitant call for uniform policies and procedures that willprovide assurance as to their credibility. Thus, the Verification and Validation (V&V) of M/S has also taken on new mean-ing. While software V&V has long been recognized as the means to credibility, only recently has it become seen as a neces-sary requirement. Standard definitions have been promulgated by the Department of Defense (DoD Directive 5000.59).Committees, working groups, and conferences are devoting much of their time to the subject. Unfortunately, because ofthese various disparate activities, confusion abounds because there is NO standard methodology for V&V. Enter the Distrib-uted Interactive Simulation (DIS), which is adding another layer of complexity, and this confusion turns into chaos.iligen Simulation Technologies, Inc. (1511) has been working IV& -rograms for the past six years. As a result, they haveevolved a methodology that has been adopted and successfully implemented by a number of different IV&V programs. Thismethodology employs a unique use of Computer Assisted Software Engineering (CASE) tools to reverse engineer source codeand produce analytical outputs (flow charts and tables) that aid the engineer/analyst in the V&V process. We have found thatthe use of CASE tools saves time, which equates to improvements in both schedule and cost. This paper will describe theISTI-developed methodology and how CASE tools are used in its support. Case studies will be discussed.1. INTRODUCTIONAs Figure 1 illustrates, technology has changed a lot in the last ten years. So has the way the DoD is doing business. At thattime, most M/S were executed on mainframe computers. At that time microprocessors, as we know them today, were justbecoming known. The IBM-compatible XT was the hot item, but it could not support computationally intensive programssuch as sophisticated MIS. In those time, MIS was not well understood. They were considered a play toy of the engi-neer/scientist. Since mainframes weren't known for their user-friendly ways, decision makers and higher-level executivesweren't known to waste their time trying to understand them.

Computational fluid dynamics (CFD) techniques have progressed to a point where they can be routinely applied towards the simulation of blood flow dynamics in the human vasculature. Patient-specific geometries and physiologically accurate flow rates can be obtained from clinical images to provide accurate boundary conditions for these simulations. Advances in computer hardware and CFD software in recent years have reduced the simulation computing time from days to hours. Such a time frame permits incorporation of the information obtained with CFD into the clinical workflow for the surgical repair vascular pathologies. In this article, the concepts of CFD are introduced via a patient-specific simulation of the hemodynamics in a type III B aortic dissection. Emphasis is placed on the practical aspects of how to optimize CFD simulations so that their results may be of clinical value to the treating surgeon. Limitations as they exist today are discussed.

Advances in computer hardware and modeling software have made it possible to simulate pulsatile blood flow in anatomically faithful arterial models derived from non-invasively acquired angiographic images. Such studies require the combination of multidisciplinary techniques ranging from medical imaging, image processing, to computational fluid and solid mechanics. Over the last few years, there has been a rapid surge of interest in combining computational fluid dynamics (CFD) with in vivo imaging techniques for more detailed investigation of haemodynamics in specific arteries of individual subjects or patients. This presentation will be focused on the modeling of blood flow at carotid artery bifurcations, using in vivo anatomical and flow data acquired by means of magnetic resonance imaging (MRI) and ultrasound. Techniques and methods required for this integrated imaging/modeling approach will be described. Subject-specific simulations of flow at the carotid bifurcation will be demonstrated, and examples will be shown for both normotensive and hypertensive subjects. Accuracy and reproducibility of this combined modeling approach will be addressed and potential applications of this tool for clinical studies will be highlighted.

Compression of images process is a step in the image processing. It is concerned with the transmission and storage of digitally created images. Fractal coding is a potential image and video compression approach with good reconstruction fidelity and relatively large compression ratios, because of its simplicity and great performance; fractal image compression (FIC) is a particularly popular approach in image compression applications. However, it has a significant disadvantage in the form of a long encoding time. This is because encoding any small bit necessitates a massive similarity search in the original data As a result; the FIC search time is reduced while the quality of the reconstructed images is maintained acceptable level in many introduced paper and other still a study topic in progress. Fractal images are images that are self-similar in that each individual part is the same as the total. This paper will discusses many attempts for more author that working on image and video compression using fractal compression technique based on various approach and with each discuss focuses on the main parameter of compression such compression ratio (CR), peak signal to noise ratio (PSNR) and encoding time, as well as the details of data set the used for testing also writing with each technique to creating fractal video and image compression. Index Terms— FIC, Video compression, parallel processing, Iteration Function System (IFS), Image processing.

Designing new medicines more cheaply and quickly is tightly linked to the quest of exploring chemical space more widely and efficiently. Chemical space is monumentally large, but recent advances in computer software and hardware have enabled researchers to navigate virtual chemical spaces containing billions of chemical structures. This review specifically concerns collections of many millions or even billions of enumerated chemical structures as well as even larger chemical spaces that are not fully enumerated. We present examples of chemical libraries and spaces and the means used to construct them, and we discuss new technologies for searching huge libraries and for searching combinatorially in chemical space. We also cover space navigation techniques and consider new approaches to de novo drug design and the impact of the "autonomous laboratory" on synthesis of designed compounds. Finally, we summarize some other challenges and opportunities for the future.

Demands on manufacturing industry to provide flexibility and to reduce costs have put pressures on manufacturing companies to improve productivity. These demands, coupled with computer hardware and software advances, have encouraged manufacturing information system (MIS) development. As a result the role and importance of a MIS within the manufacturing environment has changed dramatically in recent years. An understanding of the new requirements is essential. In particular, traditional ways of providing manufacturing information to the shop-floor has not necessarily been task related. Rather, general information were made available but needed to be found or located as and when required. Although this has satisfied the requirements of normal operations, there are a number of problems associated with this form of documentation and display. The physical separation of the processes and their descriptions, the procedures, the poor user friendliness, the high maintenance efforts and the inability of the documentation systems to effectively capture process know how are some of the key problems. These have placed limitations on the use of traditional approaches. As an attempt to improve the situation, this paper discusses the structure of a task-centered, multi-media (TCMM) manufacturing information system which aims to provide a working environment to help the user collect, select and present manufacturing data according to the specific needs of managers/operators. With a task-centered user interface and an integrated computer-based training (CBT) module, such a system can be used at various levels within the organization both as: A reference library to provide information such as products data and operational procedures; A task-centred, interactive system to help carry out on-line operations, and; A computer-aided training tool to train the company's managers/operators. Furthermore, its structure as a knowledge repository should lend itself to grow and adoptive, as the company's product ranges and manufacturing processes progress through time. A number of intranet-based TCMM implementation are also discussed to illustrate its industrial application.

In modern world more image and video compression technologies improving gradually. But major barrier of the new technologies concepts are repeated from authors. Because authors can’t find in depth of the papers from various technologies. So Survey of Video Compression Techniques very helpful for these types problems in video compression areas. Video compression techniques such as DCT coding, Quantization, Entropy coding, Motion estimation are widely used in video compression techniques. The main focus of this paper is to analyse video compression techniques required for video processing especially to discover how much amount of data to compressed, which techniques is faster and visual quality better and so on. We evaluate the video compression techniques for finding compression ratio in terms of performance, speed and accuracy. We also compare video compression techniques with conventional methods.

Modeling and simulation have quickly become equivalent pillars of research along with traditional theory and experimentation. The growing realization that most complex phenomena of interest span many orders of spatial and temporal scales has led to an exponential rise in the development and application of multiscale modeling and simulation over the past two decades. In this perspective, the associate editors of the International Journal for Multiscale Computational Engineering and their co-workers illustrate current applications in their respective fields spanning biomolecular structure and dynamics, civil engineering and materials science, computational mechanics, aerospace and mechanical engineering, and more. Such applications are highly tailored, exploit the latest and ever-evolving advances in both computer hardware and software, and contribute significantly to science, technology, and medical challenges in the 21st century.

The remote sensing applications are growing very rapidly with the availability of high-resolution data from the state of the art satellites like IRS-1C/1D/P4. The advancement in computer hardware and software in the area of remote sensing also enhance the growth of remote sensing applications. IRS-1C/1D/P4 provides data with the resolution of 5.6m in panchromatic mode giving more information of the ground area covered. The remote sensing satellites with high-resolution sensors and wide coverage capabilities will provide the data with better resolution, coverage and revisit to meet the growing application needs. Many applications like crop acreage and yield estimation, draught monitoring and assessment, flood mapping, waste land mapping, mineral prospectus, forest resource survey etc., have become an integral part of the resources management system in the developing countries. These resource management systems need the data to be transferred in real time or near real time for processing. The transfer of data in real time or near real time calls for advanced data delivery techniques to deliver the data as quickly as possible. Processing of remote sensing data can be performed even on low cost personal computers, which in turn further increases the remote sensing applications enabling by setting up the processing centers even at grass root level i.e., at district, taluk or village level. Setting up of processing centers at grass root level demands for quick, cost effective and efficient data delivery mechanism to transfer remote sensing data with or without value added services. The digital revolution has reached broadcasting with the introduction of direct broadcasting of digital data. These modify the traditional data transfer techniques by separating the actual service from the transmission system, thus enabling the distribution of any kind of digital data to stationary, portable or mobile terminals. This allows remote sensing data to reach a large number of users simultaneously and independent of their location. This article highlights the concepts, possibilities, and implementation mechanisms to realize the remote sensing data transfer through direct broadcasting technique and enhance remote sensing applications.