Damage assessment in structures using artificial neural network working and a hybrid stochastic optimization

Efficient Artificial neural networks based on a hybrid metaheuristic optimization algorithm for damage detection in laminated composite structures

Spam detection is one of the major problems which considered by many researchers by different developed strategies. Artificial Neural Network (ANN) is one of many others being proposed. However designing an ANN is a difficult task as it requires setting of ANN structure and tuning of some complex parameters. In this study, ANN was hybridized with Genetic algorithm (GA) in order to optimize the performance of ANN for spam detection. GA was used to determine some ANN parameters and suggest optimum weights to efficiently enhance the ANN learning. Experimental results show that the hybrid ANN and GA has superior performance when compared to conventional ANN.

The Brain Emotional Learning (BEL) is a novel bio-inspired machine learning approach mentioned as a new class of artificial neural network (ANN). The artificial emotional neural network (AENN) is one of the BEL methods which used the genetic algorithm (GA) to compute proper weights, weights of the amygdala (AMYG), orbitofrontal cortex (OFC) weights and a bias value. AENN trained by GA has been reported that it could produce low error rates. However, AENN still has more rooms to enhance its prediction of performance, especially generalization and the prediction of performance. Therefore, this paper aims to propose a new training method for AENN. The JAYA optimization algorithm optimized the weights and the biases of AENN. Two new proposed models are named as AENN-Max-JAYA and AENN-Mean-JAYA. Their names are according to the way of selecting the additional expanded feature which obtained through either the max or the average of input patterns, respectively. From the experimental results for wind power forecasting dataset, the proposed methods proved that the results are better in generalization performance and give lower error rates which compared to the comparative AENN models and traditional ANNs.

A good exploration ability can ensure that the method jumps out of local optimum in multimodal problems and a good exploitation can ensure an algorithm converge faster to global optimum values. So, this paper proposes a new hybrid sperm swarm optimization and genetic algorithm to obtain global optimal solutions termed HSSOGA which is developed based on the concept of balancing the exploration and exploitation capability by merging Sperm Swarm Optimization (SSO), which has a fast convergence rate, and a Genetic Algorithm (GA) that can explore a search domain efficiently. To ensure that the proposed method delivers good performance, it is evaluated with 11 standard test function problems consisting of 5 unimodal and 6 multimodal functions. The proposed HSSOGA set is compared with conventional GA and SSO methods, as well as with several hybrid methods such as Hybrid Firefly and Particle Swarm Optimization (HFPSO), hybrid Simulated Annealing and Genetic Algorithm (SAGA), Hybrid Particle Swarm Optimization and Genetic Algorithm (HFPSO), hybrid Particle Swarm Optimization and Grey Wolf Optimization (PSOGWO), and closely related Hybrid Sperm Swarm Optimization and Gravitational Search Algorithm (HSSOGSA). The results are evaluated in terms of each method’s best fitness, mean, standard deviation, and convergence rates. The numerical experiment results show that HSSOGA has better convergence towards the true global optimum values as compared to the conventional and existing hybrid methods in most unimodal and multimodal test function problems.

Objective: The main objective of this paper is to improve the intrusion detection accuracy of neural networks by hybridized with Jordan network, applying novel Lyapunov function and changing input values as fuzzy values using fuzzy logic. Methods: In this research, the intrusion detection of NSL KDD dataset is carry out by neural network first . The performance of neural networks mainly depends on the parameters like number of hidden layer, no of node in the hidden layer and the no of epoch. Selecting the proper parameters values and weight initialization are the main difficulty in neural network. To overcome this issue a hybrid network by combining neural network with Jordan network is proposed which is highly sensitive to weight convergence. In hybrid network Lyapunov function is used to achieve the stability of equilibrium between two networks. But in this work a novel Lyapunov function is proposed to achieve global robust stability in hybrid network. A novel Lyapunov function uses a class of general activation functions which are not to be differentiable, bounded or monotonically nondecreasing. A set of criteria are derived to guarantee the existence, uniqueness and global robust stability of the equilibrium of hybrid networks with time delays. Then the learning ability of hybrid network is improved by using fuzzy logic. The hybrid network improved by a novel Lyapunov and fuzzy logic is called as Improved Fuzzy Hybrid Jordan network and Artificial Neural Network (IHFJANN). Findings: Artificial Neural Network (ANN), Hybrid Jordan network and Artificial Neural Network (HJANN) and Improved Hybrid Fuzzy Jordan network and Artificial Neural Network (IHFJ ANN) are applied on NSL KDD training dataset to lean the type of available attacks. NSL training dataset contains 2500 instances and 38 attributes where as testing dataset contains 995 instances and 38 attributes. The learned model of three classifiers is used to predict the classes in test dataset. The performance measures are evaluated in terms of accuracy, precision, recall and f-measure values. Improvement: The classification accuracy of Artificial Neural Network (ANN), Hybrid Jordan network and Artificial Neural Network (HJANN) and Improved Hybrid Fuzzy Jordan network and Artificial Neural Network (IHFJANN) are 72%, 80% and 84% respectively. Accuracy is increased by 12% in IHFJANN than the ANN and 4% than the HJANN. The precision value of ANN, HJANN and IHFJANN are 0.46, 0.54 and 0.57 respectively. Precision value is increased by 0.9 in IHFJANN than the ANN and 0.3 than the HJANN. The recall value of ANN, HJANN and IHFJANN are 0.73, 0.81 and 0.84 respectively. Recall value is increased by 0.9 in IHFJANN than the ANN and 0.3 than the HJANN. The F-measure value of ANN, HJANN and IHFJANN are 0.58, 0.65 and 0.68 respectively. F-measure value is increased by 0.10 in IHFJANN than the ANN and 0.3 than the HJANN. The results proved that the proposed IHFJANN provides better performance than ANN and HJANN.

A new approach for visual identification of orange varieties using neural networks and metaheuristic algorithms

This paper studies the two-stage assembly flow shop problem (TAFSP) considering aging effects of the machines and preventive maintenance activities. At the first stage, m-1 parallel machines process parts of each jobs, and at the second stage, related parts of the jobs are assembled by one assembly machine. As the machines work on the jobs, their tools get aged. Aging effects on the machines causes that they will not be able to complete the jobs in the same time could as they were new or when they are operating jobs immediately after their preventive maintenance activity. Processing times of the job are related to the positions, in which it is located after the last preventive maintenance. The job that is operated in a position immediately after the preventive maintenance activity on a machine has its standard processing time. However, the processing time of the jobs operated in the further positions increase based on the number of the positions. The machines return to the initial condition after each preventive maintenance activity. The objective is to schedule the jobs on the machines and determine when the preventive maintenance activities get done on them in order to minimize the total weighted tardiness and maintenance costs. An integer mathematical model is presented for the problem and its validation is shown by solving an example in small scale. Since two-stage assembly flow shop problem is NP-hard, in order to solve the problem in medium and large scale two meta-heuristic algorithms, hybrid genetic algorithm (HGA) and hybrid particle swarm optimization (HPSO) are proposed. These algorithms are the hybrid version of genetic algorithm and particle swarm optimization representatively with simulated annealing. The algorithms are tuned by using Taguchi method, and are used to solve many numerical examples. Finally, the statistical analysis illustrates that the performance of HPSO is better than HGA.

Back-propagation (BP)-trained artificial neural networks (ANN) are often used to simulate material behavior characterized by nonlinear, complex, or unknown interactions among the many components of the material. Despite the widespread use of back-propagation neural networks (BPNNs) in various fields, the BP technique has the inherent drawback of being stuck at local minima rather than progressively converging to a maximum global value. This chapter models an accurate and fast concrete mix compression strength estimation technique using ANN and genetic algorithms (GA). The ANN-GA model underpredicts compressive strength values since its NMBE statistics for the BPNN, and ANN-GA models are 0.006 and 0.02, respectively. BPNN, on the other hand, was able to produce a prediction of compressive strength values that were close to optimum. The chapter found that the BPNN model produced more consistent predictions than the frequently utilized hybrid ANN-GA model.

Soil texture and particle size fractions (PSFs) are a critical characteristic of soil that influences most physical, chemical, and biological properties of soil; furthermore, reliable spatial predictions of PSFs are crucial for agro-ecological modeling. Here, series of hybridized artificial neural network (ANN) models with bio-inspired metaheuristic optimization algorithms such as a genetic algorithm (GA-ANN), particle swarm optimization (PSO-ANN), bat (BAT-ANN), and monarch butterfly optimization (MBO-ANN) algorithms, were built for predicting PSFs for the Mazandaran Province of northern Iran. In total, 1595 composite surficial soil samples were collected, and 64 environmental covariates derived from terrain, climatic, remotely sensed, and categorical datasets were used as predictors. Models were tested using a repeated 10-fold nested cross-validation approach. The results indicate that the hybridized ANN methods were far superior to the reference approach using ANN with a backpropagation training algorithm (BP-ANN). Furthermore, the MBO-ANN approach was consistently determined to be the best approach and yielded the lowest error and uncertainty. The MBO-ANN model improved the predictions in terms of RMSE by 20% for clay, 10% for silt, and 24% for sand when compared to BP-ANN. The physiographical units, soil types, geology maps, rainfall, and temperature were the most important predictors of PSFs, followed by the terrain and remotely sensed data. This study demonstrates the effectiveness of bio-inspired algorithms for improving ANN models. The outputs of this study will support and inform sustainable soil management practices, agro-ecological modeling, and hydrological modeling for the Mazandaran Province of Iran.

As it is well-known, orange peel is used for making jam and oil. For this purpose, orange samples with high peel thickness are best. In order to predict peel thickness in orange fruit, we present a system based in image features, comprising: area, eccentricity, perimeter, length/area, blue value, green value, red value, wide, contrast, texture, wide/area, wide/length, roughness, and length. A novel identification solution based on the hybrid of particle swarm optimization (PSO), genetic algorithm (GA) and artificial neural network (ANN) is proposed. In addition, principal component analysis (PCA) has been applied to reduce the number of dimensions, without much loss of information. Taguchi's robust optimization technique has been applied to determine the optimal setting for parameters of PSO, GA, and ANN. The optimal level of factors were: Number of Neuron in first layer=7, Number of Neuron in second layer=2, Maximum Iteration=400, Crossover probability=0.7, Mutation probability=0.1, and Swarm (Population) Size=200. Results for prediction of orange peel thickness based on levels that are achieved by Taguchi method were evaluated by five performance measures: the coefficient of determination (R2), mean squared error (MSE), mean absolute error (MAE), sum square error (SSE), and root mean square error (RMSE), reaching values of 0.8571, 0.0123, 0.0924, 1.392, and 0.1109, respectively.

Since the last decade, several studies have shown the ability of Artificial Neural Networks (ANNs) in modeling of rainfall-runoff process. From methodological viewpoint, ANN belongs to more general paradigm, i.e., soft computing or computational intelligence, in which independent methodologies, mostly Fuzzy Logic (FL), ANN, and Genetic Algorithms (GAs), are combined together in order to provide an intelligent behavior in computational frameworks. Consequently, in the context of rainfall-runoff modeling, this question rises whether hybridization of ANNs with other soft computing-related methodologies improves the overall performance of modeling or not. In this study, based on the idea of structure and/or parameter identification of ANNs with GAs, the evolutionary neural networks modeling paradigm is examined for describing the rainfall-runoff process. One of the benchmark data set of current literature, i.e., Leaf River basin (near Collins, Mississippi) data set, is used for simulation. The results show that on the one hand, the overall accuracy is improved; but one the other hand, in evolutionary neural modeling, the computational time is increased significantly. Hence the modeler may be faced with a trade-off problem between accuracy and computational difficulties which may have different importance in a particular rainfall-runoff problem.

Recovery prediction of copper oxide ore column leaching by hybrid neural genetic algorithm

ABSTRACTReservoir characterization involves describing different reservoir properties quantitatively using various techniques in spatial variability. Nevertheless, the entire reservoir cannot be examined directly and there still exist uncertainties associated with the nature of geological data. Such uncertainties can lead to errors in the estimation of the ultimate recoverable oil. To cope with uncertainties, intelligent mathematical techniques to predict the spatial distribution of reservoir properties appear as strong tools. The goal here is to construct a reservoir model with lower uncertainties and realistic assumptions. Permeability is a petrophysical property that relates the amount of fluids in place and their potential for displacement. This fundamental property is a key factor in selecting proper enhanced oil recovery schemes and reservoir management. In this paper, a soft sensor on the basis of a feed‐forward artificial neural network was implemented to forecast permeability of a reservoir. Then, optimization of the neural network‐based soft sensor was performed using a hybrid genetic algorithm and particle swarm optimization method. The proposed genetic method was used for initial weighting of the parameters in the neural network. The developed methodology was examined using real field data. Results from the hybrid method‐based soft sensor were compared with the results obtained from the conventional artificial neural network. A good agreement between the results was observed, which demonstrates the usefulness of the developed hybrid genetic algorithm and particle swarm optimization in prediction of reservoir permeability.

Fiber-reinforced concrete (FRC) is one of the efficient innovation in concrete industry that has the ability to enhance the mechanical properties significantly. To cope up with the increase in infrastructural activities which resulted in greater demand in production of different construction materials have a negative impact on the environment, this study aims to determine the mechanical performance of the optimum compressive and flexural strength of buntal fiber-reinforced concrete with surkhi as partial replacement for sand (BFRC-SS). Using 28th-day compressive and flexural strength, several mixtures were experimentally tested to derive a mix proportion that gave the best mechanical properties of BFRC-SS. From the results, best hybrid models of compressive and flexural strength were formulated using Artificial Neural Network (ANN). Results showed that ANN was able to establish the effects of surkhi and buntal (Corypha utan Lam) fiber to the mechanical properties of BFRC-SS. Furthermore, the multi-objective Genetic Algorithm (GA) model generated the optimum proportion for the best compressive and flexural strength. Fuzzy Inference System (FIS) and Multi-Linear Regression Analysis (MLRA) were also utilized to assess and validate the hybrid model through surface imaging. Utilizing least percent error, ANN hybrid model showed the most significant predictive model compared to other models generated by MLRA and FIS. This study adoptied the fusion of 4.0 Industrial Revolution and favoring creativity and integrity through artificial intelligence.

The growth of rice is a sequence of three different phenological phases. This sequence of change in rice phenology implies that the condition of the plant during the vegetative phase relates directly to the health of leaves functioning during the reproductive and ripening phases. As such, accurate monitoring is important towards understanding rice growth dynamics. Leaf Area Index (LAI) is an important indicator of rice yields and the availability of this information during key phenological phases can support more informed farming decisions. Satellite remote sensing has been adopted as a proxy to field measurements of LAI and with the launch of freely available high resolution Satellite images such as Sentinel-2, it is imperative that accurate retrieval methods are adopted towards monitoring LAI at irrigated rice fields. Here, we evaluate the potential of a hybrid radiative transfer model (i.e., PROSAIL - Gaussian Process Regression (GPR), for estimating the phenological dynamics of irrigated rice LAI using imager derived from the Sentinel-2 multispectral instrument. LAI field measurements were obtained from an experimental rice field in Nasarawa state, Nigeria during the dry season. We used the PROSAIL radiative transfer model to create a look up table (LUT) that was subsequently used to train a GPR model. Afterwards, we evaluated the potential of the hybrid modelling approach by assessing the overall model accuracy and the extent to which LAI was able to accurately predict LAI during key rice phenological phases. We compared the predicted hybrid GPR LAI values with LAI values generated from the SNAP toolbox, based on a hybrid Artificial Neural Network (ANN) modelling approach. Our results show that the overall predictive accuracy of the hybrid GPR model (R2 = 0.82, RMSE = 1.65) was more accurate than that of the hybrid ANN model (R2 = 0.66, RMSE = 3.89) for retrieving LAI values from Sentinel-2 imagery. Both models underestimated LAI values during the reproductive and ripening phases . However, the accuracy during the phenological phases were more significant when using the hybrid GPR model (P < 0.05). During the different phenological phases, the hybrid GPR model predicted LAI more accurately during the reproductive (R2 = 0.7) and ripening (R2 = 0.59) phases compared to the hybrid ANN reproductive and ripening phases. When monitoring LAI phenological profiles of both hybrid models, the hybrid GPR and ANN models underestimated LAI during the reproductive and ripening phases. However, the ANN model underestimations were statistically significantly greater than those for the hybrid GPR model (P < 0.05). Our results highlight the potential of hybrid GPR models for estimating the phenological dynamics of irrigated rice LAI from Sentinel-2 data. They provided more accurate estimation of LAI patterns from varying nitrogen and water applications than hybrid ANN models.