Evolutionary Neural Network Modeling for Describing Rainfall-Runoff Process

Spam detection is one of the major problems which considered by many researchers by different developed strategies. Artificial Neural Network (ANN) is one of many others being proposed. However designing an ANN is a difficult task as it requires setting of ANN structure and tuning of some complex parameters. In this study, ANN was hybridized with Genetic algorithm (GA) in order to optimize the performance of ANN for spam detection. GA was used to determine some ANN parameters and suggest optimum weights to efficiently enhance the ANN learning. Experimental results show that the hybrid ANN and GA has superior performance when compared to conventional ANN.

Objective: The main objective of this paper is to improve the intrusion detection accuracy of neural networks by hybridized with Jordan network, applying novel Lyapunov function and changing input values as fuzzy values using fuzzy logic. Methods: In this research, the intrusion detection of NSL KDD dataset is carry out by neural network first . The performance of neural networks mainly depends on the parameters like number of hidden layer, no of node in the hidden layer and the no of epoch. Selecting the proper parameters values and weight initialization are the main difficulty in neural network. To overcome this issue a hybrid network by combining neural network with Jordan network is proposed which is highly sensitive to weight convergence. In hybrid network Lyapunov function is used to achieve the stability of equilibrium between two networks. But in this work a novel Lyapunov function is proposed to achieve global robust stability in hybrid network. A novel Lyapunov function uses a class of general activation functions which are not to be differentiable, bounded or monotonically nondecreasing. A set of criteria are derived to guarantee the existence, uniqueness and global robust stability of the equilibrium of hybrid networks with time delays. Then the learning ability of hybrid network is improved by using fuzzy logic. The hybrid network improved by a novel Lyapunov and fuzzy logic is called as Improved Fuzzy Hybrid Jordan network and Artificial Neural Network (IHFJANN). Findings: Artificial Neural Network (ANN), Hybrid Jordan network and Artificial Neural Network (HJANN) and Improved Hybrid Fuzzy Jordan network and Artificial Neural Network (IHFJ ANN) are applied on NSL KDD training dataset to lean the type of available attacks. NSL training dataset contains 2500 instances and 38 attributes where as testing dataset contains 995 instances and 38 attributes. The learned model of three classifiers is used to predict the classes in test dataset. The performance measures are evaluated in terms of accuracy, precision, recall and f-measure values. Improvement: The classification accuracy of Artificial Neural Network (ANN), Hybrid Jordan network and Artificial Neural Network (HJANN) and Improved Hybrid Fuzzy Jordan network and Artificial Neural Network (IHFJANN) are 72%, 80% and 84% respectively. Accuracy is increased by 12% in IHFJANN than the ANN and 4% than the HJANN. The precision value of ANN, HJANN and IHFJANN are 0.46, 0.54 and 0.57 respectively. Precision value is increased by 0.9 in IHFJANN than the ANN and 0.3 than the HJANN. The recall value of ANN, HJANN and IHFJANN are 0.73, 0.81 and 0.84 respectively. Recall value is increased by 0.9 in IHFJANN than the ANN and 0.3 than the HJANN. The F-measure value of ANN, HJANN and IHFJANN are 0.58, 0.65 and 0.68 respectively. F-measure value is increased by 0.10 in IHFJANN than the ANN and 0.3 than the HJANN. The results proved that the proposed IHFJANN provides better performance than ANN and HJANN.

In this research, a hybrid artificial neural network (ANN) optimized by a genetic algorithm (GA) was used to estimate energy and exergy analyses parameters. This article presents an approach for estimating energy and exergy analyses parameters with optimized ANN model based on GA (GA-ANN) for different ternary blends consisting of diesel, biodiesel and bioethanol in a single-cylinder, water-cooled diesel engine. The data used in the experiments performed at twelve different engine speeds between 1000 and 3000 rpm with 200 rpm intervals for five different fuel mixtures consisting of fuel mixtures prepared by blends biodiesel, diesel and 5% bioethanol in different volumes constitute the input data of the models. Using these input data, engine torque (ET), amount of fuel consumed depending on fuels and speed (AFC), carbon monoxide emission values (CO), carbon dioxide emission values (CO2), hydrocarbon emission values (HC), nitrogen oxides emission values (NOx), the amount of air consumed (AAC), exhaust gas temperatures (EGT) and engine coolant temperatures (ECT) were estimated with the GA-ANN. In examining the results obtained were examined, it was proved that diesel, biodiesel and bioethanol blends were effective in predicting all the results mentioned in engine studies performed at 200 rpm intervals in the 1000-3000 rpm range. A standard ANN model used in the literature was also proposed to measure the prediction performance of GA-ANN model. The predictive results of both models were compared using various performance indices. As a result, it was revealed that the proposed GA-ANN model reached higher accuracy in estimating the exergy and energy analyses parameters of the diesel engine compared to the standard ANN technique.

Artificial neural network (ANN) has been commonly used to deal with many problems. However, since this algorithm applies backpropagation algorithms based on gradient descent (GD) technique to look for the best solution, the network may face major risks of being entrapped in local minima. To overcome those drawbacks of ANN, in this work, we propose a novel ANN working parallel with metaheuristic algorithms (MAs) to train the network. The core idea is that first, (1) GD is applied to increase the convergence speed. (2) If the network is stuck in local minima, the capacity of the global search technique of MAs is employed. (3) After escaping from local minima, the GD technique is applied again. This process is applied until the target is achieved. Additionally, to increase the efficiency of the global search capacity, a hybrid of particle swarm optimization and genetic algorithm (PSOGA) is employed. The effectiveness of ANNPSOGA is assessed using both numerical models and measurement. The results demonstrate that ANNPSOGA provides higher accuracy than traditional ANN, PSO, and other hybrid ANNs (even a higher level of noise is employed) and also considerably decreases calculational cost compared with PSO.

The growth of rice is a sequence of three different phenological phases. This sequence of change in rice phenology implies that the condition of the plant during the vegetative phase relates directly to the health of leaves functioning during the reproductive and ripening phases. As such, accurate monitoring is important towards understanding rice growth dynamics. Leaf Area Index (LAI) is an important indicator of rice yields and the availability of this information during key phenological phases can support more informed farming decisions. Satellite remote sensing has been adopted as a proxy to field measurements of LAI and with the launch of freely available high resolution Satellite images such as Sentinel-2, it is imperative that accurate retrieval methods are adopted towards monitoring LAI at irrigated rice fields. Here, we evaluate the potential of a hybrid radiative transfer model (i.e., PROSAIL - Gaussian Process Regression (GPR), for estimating the phenological dynamics of irrigated rice LAI using imager derived from the Sentinel-2 multispectral instrument. LAI field measurements were obtained from an experimental rice field in Nasarawa state, Nigeria during the dry season. We used the PROSAIL radiative transfer model to create a look up table (LUT) that was subsequently used to train a GPR model. Afterwards, we evaluated the potential of the hybrid modelling approach by assessing the overall model accuracy and the extent to which LAI was able to accurately predict LAI during key rice phenological phases. We compared the predicted hybrid GPR LAI values with LAI values generated from the SNAP toolbox, based on a hybrid Artificial Neural Network (ANN) modelling approach. Our results show that the overall predictive accuracy of the hybrid GPR model (R2 = 0.82, RMSE = 1.65) was more accurate than that of the hybrid ANN model (R2 = 0.66, RMSE = 3.89) for retrieving LAI values from Sentinel-2 imagery. Both models underestimated LAI values during the reproductive and ripening phases . However, the accuracy during the phenological phases were more significant when using the hybrid GPR model (P < 0.05). During the different phenological phases, the hybrid GPR model predicted LAI more accurately during the reproductive (R2 = 0.7) and ripening (R2 = 0.59) phases compared to the hybrid ANN reproductive and ripening phases. When monitoring LAI phenological profiles of both hybrid models, the hybrid GPR and ANN models underestimated LAI during the reproductive and ripening phases. However, the ANN model underestimations were statistically significantly greater than those for the hybrid GPR model (P < 0.05). Our results highlight the potential of hybrid GPR models for estimating the phenological dynamics of irrigated rice LAI from Sentinel-2 data. They provided more accurate estimation of LAI patterns from varying nitrogen and water applications than hybrid ANN models.

Soil texture and particle size fractions (PSFs) are a critical characteristic of soil that influences most physical, chemical, and biological properties of soil; furthermore, reliable spatial predictions of PSFs are crucial for agro-ecological modeling. Here, series of hybridized artificial neural network (ANN) models with bio-inspired metaheuristic optimization algorithms such as a genetic algorithm (GA-ANN), particle swarm optimization (PSO-ANN), bat (BAT-ANN), and monarch butterfly optimization (MBO-ANN) algorithms, were built for predicting PSFs for the Mazandaran Province of northern Iran. In total, 1595 composite surficial soil samples were collected, and 64 environmental covariates derived from terrain, climatic, remotely sensed, and categorical datasets were used as predictors. Models were tested using a repeated 10-fold nested cross-validation approach. The results indicate that the hybridized ANN methods were far superior to the reference approach using ANN with a backpropagation training algorithm (BP-ANN). Furthermore, the MBO-ANN approach was consistently determined to be the best approach and yielded the lowest error and uncertainty. The MBO-ANN model improved the predictions in terms of RMSE by 20% for clay, 10% for silt, and 24% for sand when compared to BP-ANN. The physiographical units, soil types, geology maps, rainfall, and temperature were the most important predictors of PSFs, followed by the terrain and remotely sensed data. This study demonstrates the effectiveness of bio-inspired algorithms for improving ANN models. The outputs of this study will support and inform sustainable soil management practices, agro-ecological modeling, and hydrological modeling for the Mazandaran Province of Iran.

Over the last decade, application of soft computing techniques has rapidly grown up in different scientific fields, especially in rock mechanics. One of these cases relates to indirect assessment of uniaxial compressive strength (UCS) of rock samples with different artificial intelligent-based methods. In fact, the main advantage of such systems is to readily remove some difficulties arising in direct assessment of UCS, such as time-consuming and costly UCS test procedure. This study puts an effort to propose four accurate and practical predictive models of UCS using artificial neural network (ANN), hybrid ANN with imperialism competitive algorithm (ICA–ANN), hybrid ANN with artificial bee colony (ABC–ANN) and genetic programming (GP) approaches. To reach the aim of the current study, an experimental database containing a total of 71 data sets was set up by performing a number of laboratory tests on the rock samples collected from a tunnel site in Malaysia. To construct the desired predictive models of UCS based on training and test patterns, a combination of several rock characteristics with the most influence on UCS has been used as input parameters, i.e. porosity (n), Schmidt hammer rebound number (R), p-wave velocity (Vp) and point load strength index (Is(50)). To evaluate and compare the prediction precision of the developed models, a series of statistical indices, such as root mean squared error (RMSE), determination coefficient (R2) and variance account for (VAF) are utilized. Based on the simulation results and the measured indices, it was observed that the proposed GP model with the training and test RMSE values 0.0726 and 0.0691, respectively, gives better performance as compared to the other proposed models with values of (0.0740 and 0.0885), (0.0785 and 0.0742), and (0.0746 and 0.0771) for ANN, ICA–ANN and ABC–ANN, respectively. Moreover, a parametric analysis is accomplished on the proposed GP model to further verify its generalization capability. Hence, this GP-based model can be considered as a new applicable equation to accurately estimate the uniaxial compressive strength of granite block samples.

This study explores the biosynthesis of silver nanoparticles (AgNPs) using the Streptomyces tuirus S16 strain, presenting an eco-friendly alternative to mitigate the environmental and health risks of chemical synthesis methods. It focuses on optimizing medium culture conditions, understanding their physicochemical properties, and investigating their potential photothermal-based antibacterial application. The S16 strain was selected from soils contaminated with heavy metals to exploit its ability to produce diverse bioactive compounds. By employing the combination of Response Surface Methodology (RSM) and Artificial Neural Network (ANN)-Genetic Algorithm (GA) strategies, we optimized AgNPs synthesis, achieving an improvement of nearly 2.45 times the initial yield under specific conditions (Bennet's medium supplemented with glycerol [5g/L] and casamino-acid [3g/L] at 30°C for 72h). A detailed physicochemical characterization was conducted. Notably, the AgNPs were well dispersed, and a carbonaceous coating layer on their surface was confirmed using energy-dispersive X-ray spectroscopy. Furthermore, functional groups were identified using Fourier-transform infrared spectroscopy, which helped enhance the AgNPs' stability and biocompatibility. AgNPs also demonstrated efficient photothermal conversion under light irradiation (0.2 W/cm2), with temperatures increasing to 41.7°C, after 30min. In addition, treatment with light irradiation of E. coli K-12 model effectively reduced the concentration of AgNPs from 105 to 52.5µg/mL, thereby enhancing the efficacy of silver nanoparticles in contact with the E. coli K-12.

Grit blasting as a pretreatment process for the substrate surface before thermal spraying is of great importance for assuring the service performance of thermal spraying coatings. In this work, a novel hybrid artificial neural network (ANN) was presented to optimize the grit blasting process to improve the structural properties and corrosion resistance performance of thermal spraying coatings. Different grit blasting process parameters were combined to pretreat the substrate surface, and the corresponding surface roughness, interface adhesion strength and corrosion resistance performance were obtained. Hence, a backpropagation (BP) neural network model optimized by the genetic algorithm (GA) was presented to address the poor regression roughness and accuracy of the traditional fitting models; the grit blasting processing parameters were utilized as the inputs for the GA–BP model; the structural properties and the corrosion resistance performance were used as the outputs. The correlation coefficient R reached and exceeded 0.90, and three error values were less than 1.75 on the prediction of the service performance of random samples. All these indicators demonstrated convincingly that the obtained hybrid artificial neural network models possessed good prediction performance, and this innovative and time-saving grit blasting process optimization approach could be potentially employed to improve the comprehensive service performance of thermal spraying coatings.

Recovery prediction of copper oxide ore column leaching by hybrid neural genetic algorithm

While information technology has facilitated the collection of neverbefore-seen quantities of data, these data have not always provided the information needed by transportation professionals to support sound decision making. Computational intelligence (CI) has great potential to support the needs of transportation professionals. CI is a result of synergy among information processing technologies such as artificial neural networks (ANNs), fuzzy sets, and genetic algorithms. As the number of CI applications to transportation problems grows, so does the need to evaluate these systems. The issue of validating and evaluating transportation CI applications is addressed. A case study that evaluates the effectiveness of two CI paradigms, case-based reasoning and ANNs, for estimating the benefits of real-time traffic diversion is presented. The case study illustrates the need for regarding validation and evaluation as a part of the development effort and the need for tuning the design parameters of CI paradigms.

The particulate matter (PM) concentration has been one of the most relevant environmental concerns in recent decades due to its prejudicial effects on living beings and the earth’s atmosphere. High PM concentration affects the human health in several ways leading to short and long term diseases. Thus, forecasting systems have been developed to support decisions of the organizations and governments to alert the population. Forecasting systems based on Artificial Neural Networks (ANNs) have been highlighted in the literature due to their performances. In general, three ANN-based approaches have been found for this task: ANN trained via learning algorithms, hybrid systems that combine search algorithms with ANNs, and hybrid systems that combine ANN with other forecasters. Independent of the approach, it is common to suppose that the residuals (error series), obtained from the difference between actual series and forecasting, have a white noise behavior. However, it is possible that this assumption is infringed due to: misspecification of the forecasting model, complexity of the time series or temporal patterns of the phenomenon not captured by the forecaster. This paper proposes an approach to improve the performance of PM forecasters from residuals modeling. The approach analyzes the remaining residuals recursively in search of temporal patterns. At each iteration, if there are temporal patterns in the residuals, the approach generates the forecasting of the residuals in order to improve the forecasting of the PM time series. The proposed approach can be used with either only one forecaster or by combining two or more forecasting models. In this study, the approach is used to improve the performance of a hybrid system (HS) composed by genetic algorithm (GA) and ANN from residuals modeling performed by two methods, namely, ANN and own hybrid system. Experiments were performed for PM2.5 and PM10 concentration series in Kallio and Vallila stations in Helsinki and evaluated from six metrics. Experimental results show that the proposed approach improves the accuracy of the forecasting method in terms of fitness function for all cases, when compared with the method without correction. The correction via HS obtained a superior performance, reaching the best results in terms of fitness function and in five out of six metrics. These results also were found when a sensitivity analysis was performed varying the proportions of the sets of training, validation and test. The proposed approach reached consistent results when compared with the forecasting method without correction, showing that it can be an interesting tool for correction of PM forecasters.

Back-propagation (BP)-trained artificial neural networks (ANN) are often used to simulate material behavior characterized by nonlinear, complex, or unknown interactions among the many components of the material. Despite the widespread use of back-propagation neural networks (BPNNs) in various fields, the BP technique has the inherent drawback of being stuck at local minima rather than progressively converging to a maximum global value. This chapter models an accurate and fast concrete mix compression strength estimation technique using ANN and genetic algorithms (GA). The ANN-GA model underpredicts compressive strength values since its NMBE statistics for the BPNN, and ANN-GA models are 0.006 and 0.02, respectively. BPNN, on the other hand, was able to produce a prediction of compressive strength values that were close to optimum. The chapter found that the BPNN model produced more consistent predictions than the frequently utilized hybrid ANN-GA model.

Fiber-reinforced concrete (FRC) is one of the efficient innovation in concrete industry that has the ability to enhance the mechanical properties significantly. To cope up with the increase in infrastructural activities which resulted in greater demand in production of different construction materials have a negative impact on the environment, this study aims to determine the mechanical performance of the optimum compressive and flexural strength of buntal fiber-reinforced concrete with surkhi as partial replacement for sand (BFRC-SS). Using 28th-day compressive and flexural strength, several mixtures were experimentally tested to derive a mix proportion that gave the best mechanical properties of BFRC-SS. From the results, best hybrid models of compressive and flexural strength were formulated using Artificial Neural Network (ANN). Results showed that ANN was able to establish the effects of surkhi and buntal (Corypha utan Lam) fiber to the mechanical properties of BFRC-SS. Furthermore, the multi-objective Genetic Algorithm (GA) model generated the optimum proportion for the best compressive and flexural strength. Fuzzy Inference System (FIS) and Multi-Linear Regression Analysis (MLRA) were also utilized to assess and validate the hybrid model through surface imaging. Utilizing least percent error, ANN hybrid model showed the most significant predictive model compared to other models generated by MLRA and FIS. This study adoptied the fusion of 4.0 Industrial Revolution and favoring creativity and integrity through artificial intelligence.

این مطالعه به منظور بررسی پیش بینی شاخص های عملکرد تولیدی در مرغان تخم گذار با استفاده از شبکه های عصبی مصنوعی و رگرسیون غیرخطی چندگانه انجام شد. بررسی بر روی اطلاعات چهار دوره متوالی پرورش در یک واحد پرورش مرغ تخم گذار صورت گرفت. روش های داده-کاوی شامل رگرسیون خطی و غیر خطی، شبکه عصبی پرسپترون سه لایه، شبکه عصبی پرسپترون چهار لایه و شبکه عصبی با تابع پایه ای شعاعی بود. در این مدل ها از متغیرهای سن گله، میزان خوراک مصرفی و فصل تولید به عنوان متغیر پیشگو و شاخص های عملکرد تولیدی شامل درصد تخم-گذاری، وزن توده ای تخم مرغ تولیدی و ضریب تبدیل غذایی به عنوان متغیر پاسخ استفاده شد. نتایج نهایی رگرسیون های خطی نشان داد که برای تمامی متغیرهای وابسته مورد مطالعه متغیر مستقل سن گله معنی دار می باشد. بنابراین رگرسیون غیر خطی شاخص های عملکرد تولیدی در مقابل سن برای مقایسه با شبکه های عصبی مختلف مورد بررسی قرار گرفت و برای مقایسه کلیه مدل ها از ضریب تعیین (R2) و میانگین قدر مطلق خطا (MAE) استفاده شد. نتایج نشان داد بین شبکه های عصبی مصنوعی مختلف مورد مطالعه، شبکه با تابع پایه ای شعاعی بهتر از سایر مدل های در پیش‌بینی شاخص های عملکرد تولیدی مرغان تخم گذار عمل می کند.