Data Sharing System Integrating Access Control Mechanism using Blockchain-Based Smart Contracts for IoT Devices

To develop access control mechanisms, particularly in terms of maintaining effective and secure access control within Internet of Things (IoT) networks. Whereas the sufficient use must be made of blockchain-based access control technology. This is because of the sheer volume of connected devices and the subsequent increase in transactions. This can negatively impact the performance and responsiveness of the networks. Thus, this article proposes a comprehensive approach that evaluates the requester’s reputation with respect to regulating access requests for IoT resources. The proposed approach combines fuzzy reputation with a decay algorithm. It then calculates the quantitative reputation value for each IoT user. This considers multiple variables, such as the Access Request Rate, frequency of requests, etc. This new reputation value serves as the basis for access-control decisions. Extensive simulations and experiments are conducted to evaluate the effectiveness of the proposed framework. For the simulation, we used a single-board Raspberry Pi. We also used a hybrid blockchain network environment comprising Geth and Hyperledger Fabric. We then analyzed and compared the performance of the proposed framework with that of the existing approaches. The results demonstrated that compared to the mathematical mechanism, the framework provides improved access control in IoT networks. The fuzzy-based reputation framework captures the dynamic nature of IoT environments, and effectively identifies trustworthy and malicious devices, whereas the decay algorithm reflects the most recent user behavior.

Internet of Things (IoT) networks are being designed to connect billions of sensors/devices for an application-specific environment to provide services and carry out special tasks. It enables the virtual connection of the real-world physical devices with Internet cyberspace. While, there is an exponentially growing trend in the use of IoT technology for diverse applications such as smart agriculture, smart industries, smart hospitals, smart homes, etc., there are pressing design issues which affect the IoT network performance in the long run, for example, replacement of batteries for increasing the lifetime of devices to maintain the network longevity. To tackle this challenge, various wireless powered-based energy transfer paradigms were proposed over time. Backscatter communication (BackCom) is likewise one of the energy-efficient solutions proposed, which can satisfy the stringent green communication aspects of IoT networks. To achieve massive connectivity in BackCom-enabled IoT network, selecting a suitable multiple access scheme is also a crucial part. Most multiple access schemes proposed for BackCom systems are based on frequency or timeslots sharing techniques. Multiple access techniques proposed for BackCom IoT system can reap the gain of non-orthogonal multiple access (NOMA) principle. In NOMA, multiple end nodes (ENs) of sensors network is served in the same resource block, thereby, increasing the spectrum efficiency of BackCom IoT system. In this chapter, we discuss the prospects of backscatter technique with application of NOMA for green communication in IoT network.

[formula omitted]: A blockchain-based secure access control management for the Internet of Things

The article examines methods and information technologies aimed at ensuring the secure integration of the Ethereum blockchain with Internet of Things (IoT) systems. The relevance of the study is driven by the rapid development of IoT, which is accompanied by increasing cybersecurity threats, including unauthorized data access, man-in-the-middle (MITM) attacks, device identifier spoofing, and the low transparency of centralized systems. The use of Ethereum blockchain technology, particularly smart contracts, opens new opportunities for creating decentralized security management models for IoT devices, enhancing trust levels, automating processes, and minimizing third-party interference risks. The “Problem statement” section outlines the key challenges in securing IoT networks, including the vulnerabilities of centralized solutions, limited computational resources of devices, and the need to develop autonomous access control systems. The “Analysis of Recent Research and Publications” section summarizes modern approaches to integrating Ethereum blockchain into the IoT field, including tokenized identification mechanisms, access control, and transaction processing using smart contracts. It is noted that leading researchers suggest Layer-2 solutions (state channels, zk-rollups, Plasma) aimed at reducing the load on the main blockchain and improving scalability. The aim of the article is to systematize modern methods of integrating the Ethereum blockchain with IoT and develop recommendations for their implementation, considering the limited resources of devices. The “Research results” section presents a secure IoT system architecture concept based on decentralized account management, local storage of cryptographic keys on devices, the use of optimized transaction signing algorithms, and the introduction of a hybrid data storage model based on IPFS. The proposed model minimizes the risk of unauthorized access, increases transparency in the interaction between IoT devices, and reduces computational resource costs. The “Conclusions and prospects for further research” section emphasizes that the implementation of the Ethereum blockchain in IoT promotes the development of secure decentralized platforms. However, it requires addressing issues such as energy consumption, transaction costs, and optimizing client applications for low-performance devices. Future research should focus on developing effective scalability tools, adapting smart contracts to IoT specifics, and improving integration with cloud computing platforms for storing large data sets.

The Internet of things (IoT) is an active, real-world area in need of more investigation. One of the top weaknesses in security challenges that IoTs face, the centralized access control server, which can be a single point of failure. In this paper, Dynamic-IoTrust, a decentralized access control smart contract based aims to overcome distrusted, dynamic, trust and authentication issues for access control in IoT. It also integrates dynamic trust value to evaluate users based on behavior. In particular, the Dynamic-IoTrust contains multiple Main Smart Contract, one Register Contract, and one Judging Contract to achieve efficient distributed access control management. Dynamic-IoTrust provides both static access rights by allowing predefined access control policies and also provides dynamic access rights by checking the trust value and the behavior of the user. The system also provides to detected user misbehavior and make a decision for user trust value and penalty. There are several levels of trusted users to access the IoTs device. Finally, the case study demonstrates the feasibility of the Dynamic-IoTrust model to offer a dynamic decentralized access control system with trust value attribute to evaluate the internal user used IoTs devices.

The environmental impacts that are associated with the interconnected sensor devices in the Internet of Things (IoT) network are minimized with the utilization of green communication. This is because, when the IoT devices tend to grow, the IoT system becomes more prone to issues regarding the utilization of resources, sustainability, and energy consumption within the communication system. Tuning the communication protocols, lowering the IoT device’s energy usage rate, and establishing an effective technique for the transmission of data are performed. This is achieved by the green communication technique, which aids in the establishment of significant energy savings in the IoT network. For devices with limited power sources, the green communication technology offers an extended battery life. Despite the enormous potential of IoT technology, a number of obstacles need to be overcome, including those related to load balancing, security, storage, privacy, energy management, and device heterogeneity. In response to the challenges posed by conventional models, an innovative solution for the selection of Cluster Head (CH) using a hybrid approach is devised here. The energy consumption of sensor nodes is influenced by various factors, such asCH load, temperature, distance, residual energy, the number of alive nodes, delay, and so on. To address these challenges in IoT networks, a hybrid approach that combines the Squid Game Optimizer (SGO) and the Artificial Gorilla Troops Optimizer (AGTO) for the optimal selection of CH is suggested. The implemented approach is named Hybrid Squid Game with Artificial Gorilla Troops Optimizer (HSG-AGTO). This approach aims to optimize the above-mentioned factors and overcome energy consumption challenges in IoT networks. The effectiveness of the model is validated, and the results demonstrate the superior performance of the suggested model.

Wireless communication networks are highly prone to security threats. The major applications of wireless communication networks are in military, business, healthcare, retail, and transportations. These systems use wired, cellular, or adhoc networks. Wireless sensor networks, actuator networks, and vehicular networks have received a great attention in society and industry. In recent years, the Internet of Things (IoT) has received considerable research attention. The IoT is considered as future of the internet. In future, IoT will play a vital role and will change our living styles, standards, as well as business models. The usage of IoT in different applications is expected to rise rapidly in the coming years. The IoT allows billions of devices, peoples, and services to connect with others and exchange information. Due to the increased usage of IoT devices, the IoT networks are prone to various security attacks. The deployment of efficient security and privacy protocols in IoT networks is extremely needed to ensure confidentiality, authentication, access control, and integrity, among others. In this paper, an extensive comprehensive study on security and privacy issues in IoT networks is provided.

With rapid advancements in the technology, almost all the devices around are becoming smart and contribute to the Internet of Things (IoT) network. When a new IoT device is added to the network, it is important to verify the authenticity of the device before allowing it to communicate with the network. Hence, access control is a crucial security mechanism that allows only the authenticated node to become the part of the network. An access control mechanism also supports confidentiality, by establishing a session key that accomplishes secure communications in open public channels. Recently, blockchain has been implemented in access control protocols to provide a better security mechanism. The foundation of this survey article is laid on IoT, where a detailed description on IoT, its architecture and applications is provided. Further, various security challenges and issues, security attacks possible in IoT and their countermeasures are also provided. We emphasize on the blockchain technology and its evolution in IoT. A detailed description on existing consensus mechanisms and how blockchain can be used to overpower IoT vulnerabilities is highlighted. Moreover, we provide a comprehensive description on access control protocols. The protocols are classified into certificate-based, certificate-less and blockchain-based access control mechanisms for better understanding. We then elaborate on each use case like smart home, smart grid, health care and smart agriculture while describing access control mechanisms. The detailed description not only explains the implementation of the access mechanism, but also gives a wider vision on IoT applications. Next, a rigorous comparative analysis is performed to showcase the efficiency of all protocols in terms of computation and communication costs. Finally, we discuss open research issues and challenges in a blockchain-envisioned IoT network.

In this paper, we address the problem of green Compressed Sensing (CS) reconstruction within Internet of Things (IoT) networks, both in terms of computing architecture and reconstruction algorithms. The approach is novel since, unlike most of the literature dealing with energy efficient gathering of the CS measurements, we focus on the energy efficiency of the signal reconstruction stage given the CS measurements. As a first novel contribution, we present an analysis of the energy consumption within the IoT network under two computing architectures. In the first one, reconstruction takes place within the IoT network and the reconstructed data are encoded and transmitted out of the IoT network; in the second one, all the CS measurements are forwarded to off-network devices for reconstruction and storage, i.e., reconstruction is off-loaded. Our analysis shows that the two architectures significantly differ in terms of consumed energy, and it outlines a theoretically motivated criterion to select a green CS reconstruction computing architecture. Specifically, we present a suitable decision function to determine which architecture outperforms the other in terms of energy efficiency. The presented decision function depends on a few IoT network features, such as the network size, the sink connectivity, and other systems’ parameters. As a second novel contribution, we show how to overcome classical performance comparison of different CS reconstruction algorithms usually carried out w.r.t. the achieved accuracy. Specifically, we consider the consumed energy and analyze the energy vs. accuracy trade-off. The herein presented approach, jointly considering signal processing and IoT network issues, is a relevant contribution for designing green compressive sampling architectures in IoT networks.

Ensemble classification using traffic flow metrics to predict distributed denial of service scope in the Internet of Things (IoT) networks

This paper investigates a critical access control issue in the Internet of Things (IoT). In particular, we propose a smart contract-based framework, which consists of multiple access control contracts (ACCs), one judge contract (JC), and one register contract (RC), to achieve distributed and trustworthy access control for IoT systems. Each ACC provides one access control method for a subject-object pair, and implements both static access right validation based on predefined policies and dynamic access right validation by checking the behavior of the subject. The JC implements a misbehavior-judging method to facilitate the dynamic validation of the ACCs by receiving misbehavior reports from the ACCs, judging the misbehavior and returning the corresponding penalty. The RC registers the information of the access control and misbehavior-judging methods as well as their smart contracts, and also provides functions (e.g., register, update, and delete) to manage these methods. To demonstrate the application of the framework, we provide a case study in an IoT system with one desktop computer, one laptop and two Raspberry Pi single-board computers, where the ACCs, JC, and RC are implemented based on the Ethereum smart contract platform to achieve the access control.

Background. With the proliferation of Internet of Things (IoT) networks in the digital age, the risk of cyberattacks, especially DDoS attacks, is also increasing. IoT devices such as smart refrigerators, thermostats, webcams and other Internet-connected home appliances are being targeted by attackers who can use them as part of a botnet to conduct DDoS attacks. These devices often have inadequate network security and are rarely updated, making them vulnerable. DDoS attacks can result in significant losses such as lost revenue, reputational damage and costs to restore services. So, the vulnerability of IoT networks to DDoS attacks and the need to develop effective protection measures is a pressing issue. Objective. The purpose of the paper is to analyse software that supports DDoS attacks in IoT networks. Provide general recommendations to help improve approaches to defence measures in IoT networks against DDoS-enabled malware. Methods. Five main DDoS attack models are considered: agent-handler model, reflexive model, IRC-based model, web-based model, and P2P-based model. Three most dangerous software capable of DDoS attacks on IoT networks are analyzed: Mirai, XOR.DDoS and Linux.Hydra. Results. There are many models and methods of DDoS attacks on IoT networks. The most dangerous are Mirai, XOR.DDoS and Linux.Hydra. Each of these software has its own specific characteristics and methods of carrying out attacks. The study also showed that there are several effective measures to counter these attacks, including setting strong passwords, regularly updating software, setting up traffic filters and restricting network access. Conclusions. Key aspects of DDoS attacks, their models and process steps are considered. The paper focuses on the three most dangerous software used to conduct such attacks and provides recommendations on how to counteract them.

A fuzzy based Co-Operative Blackmailing Attack detection scheme for Edge Computing nodes in MANET-IOT environment

The convergence of the Internet of Things (IoT), fog computing, and block chain technology has revolutionized contemporary digital ecosystems by making data management decentralized, efficient, and scalable. Nonetheless, this integration poses serious security and privacy threats. IoT devices produce enormous amounts of sensitive data, making them easy targets for cyber attacks, unauthorized access, and data breaches. Classic cloud-based solutions tend to be challenged by latency, bandwidth limitations, and centralized attacks, making the use of fog computing inevitable to decentralize data processing for better responsiveness and decreased dependency on remote cloud servers. While fog computing offers advantages, it also poses new security threats through possible insider attacks and data integrity issues. Block chain technology solves these problems by presenting a tamper-resistant, decentralized ledger that improves trust, security, and transparency for IoT networks. Block chain, via cryptographic authentication, consensus protocols, and smart contracts, ensures the secure transaction of data while alleviating risks against unauthorized data manipulation. Scalability, computational complexity, and energy efficiency are still challenges that need to be met for widespread IoT adoption. This chapter discusses the complex security and privacy problems in IoT, fog, and blockchain networks and examines current threats and countermeasures. Advanced cryptographic methods, secure communication schemes, and access control techniques for strengthening the security of these connected systems are mentioned. It further presents future research directions and trends that will improve a safer, more efficient, and privacy-augmented digital infrastructure.

A blockchain-enabled Model integrates blockchain technology with Intrusion Detection Systems to enhance the security of Internet of Things (IoT) networks. It ensures data integrity, decentralization, and tamper-proof logging of intrusion detection. The approach improves trust, transparency, and real-time threat detection in distributed IoT environments. The existing blockchain-based IDS approaches, Blockchain Enabled (BCE-IoT), uniquely integrate blockchain consensus with federated-style local training, lightweight cryptography, and Shapley Additive Explanations (SHAP)-based explainability, ensuring both security and interpretability in IoT environments. The proposed work combines Blockchain technology with explainable artificial intelligence solutions to create a new cybersecurity Model that strengthens intrusion detection within IoT networks. The proposed model enhances transparency in tracking cyberattacks by combining blockchain security storage capabilities with SHAP, an explainable AI. This research utilises machine learning and artificial intelligence to detect threats in real-time, countering Distributed Denial of Service (DDoS), Denial of Service (DoS), scanning, Cross-Site Scripting (XSS), injection, password, and backdoor attacks. BCE-IoT delivers more precise security by combining blockchain’s permanent data features and AI anomaly detectors, thereby reducing security alert mistakes. The performance effectiveness of Blockchain-Enabled IoT surpasses that of the Content Integrity Detection System. It combines Blockchain and Software-Defined Networking to enhance security in network environments, utilising blockchain-based mutual confirmation for software-defined networking to detect and block cyber threats. The evaluation establishes BCE-IoT as an effective IoT network security solution that delivers strong cybersecurity features, is adaptable to modern connected environments, and offers interpretable security solutions. The performance evaluations demonstrate that BCE-IoT provides a robust, flexible, and interpretable cybersecurity solution suitable for modern IoT environments.