Decision support for truckload carriers in one-shot combinatorial auctions

It is known that minimum cost flow problems can be solved by successive augmentations along shortest paths. In this paper the issues of implementing shortest path algorithms in this context are examined. Of particular interest is the dynamic topology that the flow networks exhibit. We develop a network generator capable of emulating such topology. Strategies for exploiting the special structures in such networks are discussed. A set of 9000 test problems is offered, from which a particular strategy/algorithm combination is shown to consistently produce superior results when compared to the other combinations.

We consider the quickest flow problem in dynamic networks with a single source s and a single sink t: given an amount of flow F, find the minimum time needed to send it from s to t, and the corresponding optimal flow over time.We introduce new mathematical formulations and derive optimality conditions for the quickest flow problem. Based on the optimality conditions, we develop a new cost-scaling algorithm that leverages the parametric nature of the problem. The algorithm solves the quickest flow problem with integer arc costs in O(nm log(n2/m) log(nC)) time, where n, m, and C are the number of nodes, arcs, and the maximum arc cost, respectively.Our algorithm runs in the same time bound as the cost-scaling algorithm by Goldberg and Tarjan [10, 11] for solving the min-cost flow problem. This result shows for the first time that the quickest flow problem can be solved within the same time bound as one of the fastest algorithms for the min-cost flow problem. As a consequence, our algorithm will remain one of the fastest unless the quickest flow problem can be shown to be simpler than the min-cost flow problem.

In this paper, we present a new strongly polynomial time algorithm for the minimum cost flow problem, based on a refinement of the Edmonds-Karp scaling technique. Our algorithm solves the uncapacitated minimum cost flow problem as a sequence of O(n log n) shortest path problems on networks with n nodes and m arcs and runs in O(n log n(m + n log n)) time. Using a standard transformation, this approach yields an O(m log n(m + n log n)) algorithm for the capacitated minimum cost flow problem. This algorithm improves the best previous strongly polynomial time algorithm, due to Z. Galil and E. Tardos, by a factor of n2/m. Our algorithm for the capacitated minimum cost flow problem is even more efficient if the number of arcs with finite upper bounds, say m′, is much less than m. In this case, the running time of the algorithm is O((m′ + n) log n(m + n log n)).

We consider the quickest flow problem in dynamic networks with a single source s and a single sink t: given an amount of flow F, find the minimum time needed to send it from s to t, and the corresponding optimal flow over time. We introduce new mathematical formulations and derive optimality conditions for the quickest flow problem. Based on the optimality conditions, we develop a new cost-scaling algorithm that leverages the parametric nature of the problem. The algorithm solves the quickest flow problem with integer arc costs in O(nm log(n2/m) log(nC)) time, where n, m, and C are the number of nodes, arcs, and the maximum arc cost, respectively. Our algorithm runs in the same time bound as the cost-scaling algorithm by Goldberg and Tarjan [10, 11] for solving the min-cost flow problem. This result shows for the first time that the quickest flow problem can be solved within the same time bound as one of the fastest algorithms for the min-cost flow problem. As a consequence, our algorithm will remain one of the fastest unless the quickest flow problem can be shown to be simpler than the min-cost flow problem.

We study a type of network flow problem that we call the minimum-cost F-graph flow problem. This problem generalizes the typical minimum-cost network flow problem by allowing the underlying network...

Decomposition based approaches are recalled from primal and dual point of view. The possibility of building partially disaggregated reduced master problems is investigated. This extends the idea of aggregated-versus-disaggregated formulation to a gradual choice of alternative level of aggregation. Partial aggregation is applied to the linear multicommodity minimum cost flow problem. The possibility of having only partially aggregated bundles opens a wide range of alternatives with different trade-offs between the number of iterations and the required computation for solving it. This trade-off is explored for several sets of instances and the results are compared with the ones obtained by directly solving the natural node-arc formulation. An iterative solution process to the route assignment problem is proposed, based on the well-known Frank Wolfe algorithm. In order to provide a first feasible solution to the Frank Wolfe algorithm, a linear multicommodity min-cost flow problem is solved to optimality by using the decomposition techniques mentioned above. Solutions of this problem are useful for network orientation and design, especially in relation with public transportation systems as the Personal Rapid Transit. A single-commodity robust network design problem is addressed. In this, an undirected graph with edge costs is given together with a discrete set of balance matrices, representing different supply/demand scenarios. The goal is to determine the minimum cost installation of capacities on the edges such that the flow exchange is feasible for every scenario. A set of new instances that are computationally hard for the natural flow formulation are solved by means of a new heuristic algorithm. Finally, an efficient decomposition-based heuristic approach for a large scale stochastic unit commitment problem is presented. The addressed real-world stochastic problem employs at its core a deterministic unit commitment planning model developed by the California Independent System Operator (ISO).

An introduction to dynamic generative networks: Minimum cost flow

Chapter 1 Applications of network optimization

Given a directed graph G = (N,A) with arc capacities u and a minimum cost flow problem defined on G, the capacity inverse minimum cost flow problem is to find a new capacity vector u' for the arc set A such that a given feasible flow x' is optimal with respect to the modified capacities. Among all capacity vectors u' satisfying this condition, we would like to find one with minimum ||u' - u|| value. We consider two distance measures for ||u' - u||, rectilinear and Chebyshev distances. By reduction from the feedback arc set problem we show that the capacity inverse minimum cost flow problem is NP-hard in the rectilinear case. On the other hand, it is polynomially solvable by a greedy algorithm for the Chebyshev norm. In the latter case we propose a heuristic for the bicriteria problem, where we minimize among all optimal solutions the number of affected arcs. We also present computational results for this heuristic.

There are various situations in which real-world problems can be modeled and solved as minimum flow problems. Sometimes, in these situations, minor data changes may occur, leading to corresponding changes of the networks in which the practical problems are modeled as flow problems, such as slight variations in capacity or lower bound. For instance, the capacity or the lower bound of an arc may increase or decrease in time, leaving one with no other choice than finding the new minimum network flow. Given both the various ways in which the networks can be changed and the high frequency of these changes, it is desirable to find as fast a computation method for minimum flow as possible. This paper is focused on the cases that concern increasing and decreasing the capacity or the lower bound of an arc. For these cases, both the minimum flow algorithms and the dynamic minimum flow algorithms that are already known are inefficient. Our incremental algorithms for determining minimum flow in the modified network are more efficient than both the above-mentioned types of algorithms. The proposed method starts from the initial network minimum flow and solves the minimum flow problem in a significantly faster way than recalculating the new network minimum flow starting from scratch.

In this work, we contribute a parallel implementation of the network simplex algorithm that is used for the solution of minimum cost flow problem. In the network simplex algorithm, finding an entering arc requires searching through many arcs to decide which one should be included in the spanning tree solution on the next iteration. We propose finding the entering arc in parallel as it often takes the majority of the execution time. A usual strategy is to pick the arc violating the optimality the most out of all possible candidates. Scanning all arcs can take quite some time, so it is common to consider only a fixed number of arcs which is referred as the block search pivoting rule. Arc scans can easily be done in parallel to find the best candidate as the calculations are independent of each other. We used shared memory parallelism using OpenMP along with vectorization using AVX instructions. We also tried adjusting block sizes to increase the parallel portion of the algorithm. Our dataset consists of various natural and synthetic graphs with sizes up to a billion arc. Our experiments show speedups up to four are possible, though they are typically lower.

Developing a polynomial time primal network simplex algorithm for the minimum cost flow problem has been a long standing open problem. In this paper, we develop one such algorithm that runs in O(min(n 2m lognC, n 2m2 logn)) time, wheren is the number of nodes in the network,m is the number of arcs, andC denotes the maximum absolute arc costs if arc costs are integer and ∞ otherwise. We first introduce a pseudopolynomial variant of the network simplex algorithm called the “premultiplier algorithm”. We then develop a cost-scaling version of the premultiplier algorithm that solves the minimum cost flow problem in O(min(nm lognC, nm 2 logn)) pivots. With certain simple data structures, the average time per pivot can be shown to be O(n). We also show that the diameter of the network polytope is O(nm logn).

Maximum flow problem on dynamic generative network flows with time-varying bounds

A theoretical and experimental study of a new algorithm for minimum cost flow in dynamic graphs

We provide a comprehensive study on network flow problems with arc reversal capabilities. The problem is to identify the arcs to be reversed in order to achieve a maximum flow from source(s) to sink(s). The problem finds its applications in emergency transportation management, where the lanes of a road network could be reversed to enable flow in the opposite direction. We study several network flow problems with the arc reversal capability and discuss their complexity. More specifically, we discuss the polynomial time algorithms for the maximum dynamic flow problem with arc reversal capability having a single source and a single sink, and for the maximum (static) flow problem. The presented algorithms are based on graph transformations and reductions to polynomially solvable flow problems. In addition, we show that the quickest transshipment problem with arc reversal capability and the problem of minimizing the total cost resulting from arc switching costs are \(\mathcal{NP}\) -hard.