Deep Learning-Based Cotton Plant Disease Detection Using CNNs: A Smart Agriculture Approach

Plant diseases have a significant impact on global food security and the world's agricultural economy. Their early detection and classification increase the chances of setting up effective control measures, which is why the search for automatic systems that allow this is of major interest to our society. Several recent studies have reported promising results in the classification of plant diseases from RGB images on the basis of Convolutional Neural Networks (CNN). These studies have been successfully experimented on a large number of crops and symptoms, and they have shown significant advantages in the support of human expertise. However, the CNN models still have limitations. In particular, CNN models do not necessarily focus on the visible parts affected by a plant disease to allow their classification, and they can sometimes take into account irrelevant backgrounds or healthy plant parts. In this paper, we therefore develop a new technique based on a Recurrent Neural Network (RNN) to automatically locate infected regions and extract relevant features for disease classification. We show experimentally that our RNN-based approach is more robust and has a greater ability to generalize to unseen infected crop species as well as to different plant disease domain images compared to classical CNN approaches. We also analyze the focus of attention as learned by our RNN and show that our approach is capable of accurately locating infectious diseases in plants. Our approach, which has been tested on a large number of plant species, should thus contribute to the development of more effective means of detecting and classifying crop pathogens in the near future.

The main goal of this research was to accurately diagnose diseases in pepper plants using convolutional neural network (CNN) models and visual parameters features. Thus, we aimed to build a computing system that can utilise visual cues to identify plant diseases with almost 100% reliability. A total of 2,200 images were trained and tested on a dataset, which was divided into healthy leaves and those with bacterial ailments. The images were preprocessed, resized to 300x300 pixels, and then segmented to extract the relevant traits from them. This CNN model, in a word, is accurate because it detects diseases with 99.65% accuracy. If we want to speak of a high accuracy rate, that's the CNN model. It learns to identify the intricate patterns and features in pepper plants that are associated with diseases. CNN can make revolutionary changes to the identification of plant diseases and help prevent crop damage through timely treatments. Automatic identification of the disease makes life easier for both agriculturists and scientists. The results underscore the importance of image preprocessing, segmentation, and feature extraction in improving the ability of CNN models to locate diseases. Additionally, the performance of the CNN model was compared with other machine learning models such as KNN, Decision Tree, ANN, and Random Forest. It was found that the developed CNN model can predict the response with greater accuracy than the others. Modern high-tech precision farming systems might utilise proposed CNN models for plant disease diagnosis.

<span id="docs-internal-guid-01580d49-7fff-6f2a-70d1-7893ec0a6e14"><span>Plant diseases are a major cause of destruction and death of most plants and especially trees. However, with the help of early detection, this issue can be solved and treated appropriately. A timely and accurate diagnosis is critical in maintaining the quality of crops. Recent innovations in the field of deep learning (DL), especially in convolutional neural networks (CNNs) have achieved great breakthroughs across different applications such as the classification of plant diseases. This study aims to evaluate scratch and pre-trained CNNs in the classification of tomato plant diseases by comparing some of the state-of-the-art architectures including densely connected convolutional network (Densenet) 120, residual network (ResNet) 101, ResNet 50, ReseNet 30, ResNet 18, squeezenet and Vgg.net. The comparison was then evaluated using a multiclass statistical analysis based on the F-Score, specificity, sensitivity, precision, and accuracy. The dataset used for the experiments was drawn from 9 classes of tomato diseases and a healthy class from PlantVillage. The findings show that the pretrained Densenet-120 performed excellently with 99.68% precision, 99.84% F-1 score, and 99.81% accuracy, which is higher compared to its non-trained based model showing the effectiveness of using a combination of a CNN model with fine-tuning adjustment in classifying crop diseases.</span></span>

Citrus fruit crops are among the world’s most important agricultural products, but pests and diseases impact their cultivation, resulting in yield and quality losses. Computer vision and machine learning have been widely used to detect and classify plant diseases over the last decade, allowing for early disease detection and improving agricultural production. This paper presented an automatic system for the early detection and classification of citrus plant diseases based on a deep learning (DL) model, which improved accuracy while decreasing computational complexity. The most recent transfer learning-based models were applied to the Citrus Plant Dataset to improve classification accuracy. Using transfer learning, this study successfully proposed a Convolutional Neural Network (CNN)-based pre-trained model (EfficientNetB3, ResNet50, MobiNetV2, and InceptionV3) for the identification and categorization of citrus plant diseases. To evaluate the architecture’s performance, this study discovered that transferring an EfficientNetb3 model resulted in the highest training, validating, and testing accuracies, which were 99.43%, 99.48%, and 99.58%, respectively. In identifying and categorizing citrus plant diseases, the proposed CNN model outperforms other cutting-edge CNN model architectures developed previously in the literature.

The accurate recognition and early warning for plant diseases and pests are a prerequisite of intelligent prevention and control for plant diseases and pests. As a result of the phenotype similarity of the hazarded plant after plant diseases and pests occur, as well as the interference of the external environment, traditional deep learning models often face the overfitting problem in phenotype recognition of plant diseases and pests, which leads to not only the slow convergence speed of the network, but also low recognition accuracy. Motivated by the above problems, the present study proposes a deep learning model EResNet-support vector machine (SVM) to alleviate the overfitting for the recognition and classification of plant diseases and pests. First, the feature extraction capability of the model is improved by increasing feature extraction layers in the convolutional neural network. Second, the order-reduced modules are embedded and a sparsely activated function is introduced to reduce model complexity and alleviate overfitting. Finally, a classifier fused by SVM and fully connected layers are introduced to transforms the original non-linear classification problem into a linear classification problem in high-dimensional space to further alleviate the overfitting and improve the recognition accuracy of plant diseases and pests. The ablation experiments further demonstrate that the fused structure can effectively alleviate the overfitting and improve the recognition accuracy. The experimental recognition results for typical plant diseases and pests show that the proposed EResNet-SVM model has 99.30% test accuracy for eight conditions (seven plant diseases and one normal), which is 5.90% higher than the original ResNet18. Compared with the classic AlexNet, GoogLeNet, Xception, SqueezeNet and DenseNet201 models, the accuracy of the EResNet-SVM model has improved by 5.10%, 7%, 8.10%, 6.20% and 1.90%, respectively. The testing accuracy of the EResNet-SVM model for 6 insect pests is 100%, which is 3.90% higher than that of the original ResNet18 model. This research provides not only useful references for alleviating the overfitting problem in deep learning, but also a theoretical and technical support for the intelligent detection and control of plant diseases and pests. © 2024 Society of Chemical Industry.

This study comparatively evaluates the performance of Convolutional Neural Networks (CNN), Vision Transformer (ViT), and Swin Transformer architectures for diagnosing plant leaf diseases. The experimental framework was evaluated using model effectiveness, F1 scores, and confusion matrices on the PlantVillage dataset, which contains 55,448 images from 39 different classes. The results show that the Swin Transformer achieved the highest diagnostic performance with a 100% F1 score, outperforming both CNN and ViT models. These findings confirm the high potential of transformer-based architectures for automated disease detection in agriculture.

With the rapid development of precision agriculture and smart agriculture, the need to build an automatic identification and detection system for diseases and insect pests is increasing. Using computers to correctly label plant diseases and insect pests is an important prerequisite for achieving accurate classification of plant diseases and insect pests and ensuring system performance. In order to improve the accuracy of computer classification of plant pests and diseases, this paper proposes an automatic pest identification method based on the Vision Transformer (ViT). In order to avoid training overfitting, the plant diseases and insect pests data sets are enhanced by methods such as Histogram Equalization, Laplacian, Gamma Transformation, CLAHE, Retinex-SSR, and Retinex-MSR. Then use the enhanced data set to train the constructed ViT neural network, so as to realize the automatic classification of plant diseases and insect pests. The simulation results show that the constructed ViT network has a test recognition accuracy rate of 96.71% on the plant disease and insect pest public data set Plant_Village, which is about 1.00% higher than the Plant disease and pest identification method based on traditional convolutional neural networks such as GoogleNet and EfficentNetV2.

Rice is the staple food in Bangladesh. Every year many crops are lost because of the disease of the rice plant. Our farmers are facing a great loss every year as well as rice productivity is declining. Some diseased and healthy leaf images of rice plants have been collected. The images have been classified into four classes. The classes are Brown Spot, Hispa, Leaf Blast diseased leaves, and Healthy leaves, usually known as Oryza Saiva diseases of rice. Deep learning is very common and popular to analyze and make predictions from these kind of image data. In this research, the CNN (Convolutional Neural Network) models have been used to predict the classes. Among various CNN models, VGG16, MobileNet, ResNet50, and DenseNet121 pre-trained models have been applied. Among those pre-trained models, the highest accuracy 95.3% has been found from the VGG16 model. In addition, an Android mobile app has been developed using the highest performant VGG16 trained model. Using this mobile app, farmers will be able to upload a photo and predict the disease of that rice plant or not in a convenient way.

Mango cultivation faces significant challenges from leaf diseases such as Gall Midge and Sooty Mould, which can reduce crop yield by up to 40% if not detected early. Traditional disease identification methods rely heavily on expert knowledge and laboratory analysis, which are time- consuming, expensive, and inaccessible to small-scale farmers. This study presents a comprehensive mobile-based solution for automated mango leaf disease detection using deep learning techniques deployed on mobile devices. The system employs a Convolutional Neural Network (CNN) optimized through quantization-aware training and deployed via TensorFlow Lite within a Flutter-based cross-platform mobile application. The dataset comprises 4,962 high-resolution images across three classes: Healthy, Gall Midge, and Sooty Mould, collected from agricultural research stations and field conditions.. The Flutter application enables farmers to capture leaf images through their smartphone cameras and receive immediate disease classification results with confidence scores, detailed disease information, and treatment recommendations. The system operates entirely offline, making it accessible in remote agricultural areas with limited internet connectivity. Results demonstrate that mobile-based deep learning can provide accurate, fast, and accessible plant disease detection, contributing to early intervention, reduced crop losses, and improved agricultural productivity for mango farmers globally. Keywords: Mango Leaf Disease Detection, TensorFlow Lite, Flutter Framework, Mobile Deep Learning, CNN Quantization, Agricultural Technology, Plant Disease Classification, On- Device Inference

Our Plant disease detection project presents a Convolutional Neural Network (CNN) model for the classification of plant diseases based on image data. The dataset comprises images of various plant diseases and healthy plants obtained from the "PlantVillage" database. The images are preprocessed by resizing them to a standard size and applying augmentation techniques. The CNN model is built using the Keras library and consists of multiple convolutional layers followed by pooling, batch normalization, and dropout layers. The model is trained using the Adam optimizer and evaluated on a test set. The training and validation accuracy and loss are plotted over the epochs to analyze the model's performance. The trained model achieves a certain accuracy on the test set, indicating its potential for accurately identifying plant diseases. The saved model can be utilized for real-world applications in plant disease detection and management, providing valuable assistance to farmers and researchers.

Apple leaf diseases can cause significant crop failure and impact the economy of farmers and the agricultural industry. With the increasing demand for quality apples, it is important to develop effective and efficient solutions to detect apple plant diseases early. This research aims to develop an automated system that can identify diseases in apple plants based on leaf images using the Convolutional Neural Network (CNN) model. This model was developed with the ResNet50V2 architecture to classify four leaf conditions: three types of common diseases and one healthy condition. This research applies the CNN model for leaf image processing and the Waterfall system development method. The stages start from needs analysis by collecting data to be processed by the cnn model, interface design of the classification system, program code implementation, and functionality testing using black-box testing. CNN model development includes the stages of collecting datasets sourced from Malang apple plantations as many as 150 images and Kaggle public datasets totalling 3,071 images, then image preprocessing, model development and training. Our research results produced an apple plant disease classification system by implementing the CNN model. Based on the results of testing the system and the model used, it shows that the CNN model applied in the system achieves a classification accuracy of 99.01%, and the functionality of the system built runs well.

In recent times, drastic changes in the climate have brought about a dramatic increase in the prevalence of crop diseases. Such diseases are a huge threat to sustainable agriculture, especially for third-world countries whose economies still rely much on agriculture. Proper disease detection is an essential prerequisite to get timely treatment of crops and prevent reduction in crop yield. In most plant diseases, the leaves may contain some texture variations, which may help in identifying the diseases. However, an identical disease may not appear in a similar fashion for different plant species and visible texture differences may be very negligible. In most cases, plant diseases are classified for all species together, which may miss the species-specific symptoms. In this paper, we propose a two-stage classification scheme to classify plant diseases that divides the whole classification pipeline into two parts: a plant species detection part and a subsequent species-specific disease detection part. In both stages, we employ some efficient deep convolutional neural network (CNN) architectures, namely EfficeintNetB3, NASNetLarge, DenseNet201, MobileNetV2, VGG16 and InceptionV3 with effective transfer learning. Two publicly available datasets, namely Plant Village and IPM, are considered in this paper. Comparative analysis reveals that the proposed two-stage method can perform better than the conventional single-stage methods reported in the literature for plant disease detection.

Abstract: Plant diseases are a major threat to crop yield and food security. Early detection and diagnosis are crucial to prevent the spread of disease and minimize crop losses. Plant diseases can have devastating effects on crop yields and food security. Disease detection is crucial for effective disease management. In recent years, deep learning techniques, such as Convolutional Neural Networks (CNN), have shown promising results in disease detection. In this study, we propose a plant disease detection system using CNN and Arduino. The system involves capturing images of plant leaves using a camera module connected to an Arduino board. In recent years, deep learning techniques such as Convolutional Neural Networks (CNNs) have shown great promise in image-based disease detection. Additionally, the use of low-cost microcontrollers like Arduino can provide a costeffective solution for real-time disease detection in the field. This paper proposes a plant disease detection system that combines CNN and Arduino for early and accurate disease detection. The system utilizes a CNN model to classify plant disease images and an Arduino board to analyze the results and provide real-time feedback to the user. The proposed system is tested on a publicly available dataset of plant disease images, achieving high accuracy, and demonstrating its potential for practical use. The results show that the proposed system can provide an affordable and efficient solution for early plant disease detection, facilitating prompt action and reducing crop losses.

Tomato leaf diseases significantly affect crop productivity, and manual inspection often leads to misclassification due to the visual similarity of symptoms. Recent studies have shown that Convolutional Neural Networks (CNN) provide high accuracy in leaf–based plant disease classification across various plant species, highlighting their potential for early disease detection. This study aims to develop an accurate tomato leaf disease classification system using a CNN model trained on the Kaggle tomato leaf dataset consisting of four classes: Leaf Blight, Bacterial Spot, Leaf Scab, and Healthy. The methodology includes literature review, dataset acquisition, preprocessing, augmentation, CNN architecture design, model training, and performance evaluation. Preprocessing techniques such as resizing and normalization were applied, followed by augmentation using random flipping and rotation to increase dataset variability. The proposed model was trained for 40 epochs with a batch size of 16. Results show consistent accuracy improvement, reaching 0.98 training accuracy with a loss of 0.07, while validation accuracy peaked at 0.94. Testing on both single and multiple images demonstrates strong prediction confidence, with minor misclassifications in visually similar cases. Overall, the system effectively identifies tomato leaf diseases and reinforces the suitability of CNN for supporting early plant disease detection in smart agriculture applications.

Plant diseases cause significant productivity and economic losses, as well as a reduction in agricultural product quality and quantity. One principal impact on low crop yield is sickness due to bacteria, virus and fungus It is possible to avoid it by employing plant disease detection and categorization procedures. We used machine learning to detect and classify diseases in plant leaves because it evaluates data from several perspectives and categorizes it into one of several predefined classifications. In this research we create a model for the classification task which is sequential model. We trained a convolutional neural network (CNN) with help of the plant village dataset, which have 55,000 images divided into 39 completely distinct categories of each healthy and effected leaves. We trained data by using Adam optimization technique because it almost constantly plays quicker and higher global minimal convergence in comparison to the alternative optimization techniques. We achieved a validation accuracy of 98.74% using the architecture of CNN containing optimized parameters. CNNs, as can be observed, have a high-stop overall performance, making them surprisingly suitable for computerized identification of plant illnesses using simple plant leaf images. The experiment effects completed are similar with different current strategies in literature.