Delaunay-triangulation based complete coverage in wireless sensor networks

Node placement for connected target coverage in wireless sensor networks with dynamic sinks

Target Coverage and Network Connectivity in Wireless Sensor Networks (WSNs) plays a momentous role in the field of monitoring environment, habitant observing, disaster recovery, surveillance, etc. Coverage and Network Connectivity collectively can be considered as a proportion of Quality of Service (QoS) in a sensor network. It implies the coverage of each point in the detecting field while in the meantime fulfilling the measure that each node is surrounded by the equivalent neighbourhood of at least one other node. Many primary issues influence the outline and performance of WSN. A Comprehensive survey is made based on the scheduling algorithm and set cover approach, in which we analyze various approaches and their algorithm complexity. Firstly, the scheduling algorithm intermittently provides the required data service with guaranteed efficiency. This methodology can efficiently reduce the entire number of active nodes in the network, resulting in maximizing the network lifetime. Secondly, the set cover approach plays a major role in solving target coverage problem which group sensors into each cover set thereby, target coverage was achieved. Typical issues and open research challenges are addressed by classifying the approaches available in literature into three broad categories namely, adaptable coverage radius, coverage deployment strategy, and sleep scheduling. This survey aims to provide a better perceptive of the existing open challenges and possible futuristic approaches for target coverage and network connectivity in wireless sensor networks.

Coverage problems are fundamental and crucial in designing a wireless sensor networks. The target coverage problem is finding an optimal scheduling for sensors such that the time (called lifetime) to monitor every target can be as long as possible. Unfortunately, the target coverage problem has been proved to be NP-complete. Most of previous work only considers one or two factors exclusively and thus fails to prolong the lifetime to near the optimum. The main objective of this work is to design efficient scheduling algorithms to maximize the lifetime of a given whole wireless sensor network by considering adjusting sensing range, locations of target and sensors, residue battery power of sensor nodes, and assignment between sensors and targets simultaneously. A maximum weighted matching algorithm is devised by considering full coverage and the maximum total monitored duration for each target-sensor assignments. We also conduct simulations to demonstrate that the proposed algorithms can achieve very high network lifetime closed to the optimum.

Achieving optimal field coverage is a significant challenge in various sensor network applications. In some specific situations, the sensor field (target) may have coverage gaps due to the random deployment of sensors; hence, the optimized level of target coverage cannot be obtained. Given a set of sensors in the plane, the target coverage problem is to separate the sensor into different groups and provide them specific time intervals, so that the coverage lifetime can be maximized. Here, the constraint is that the network should be connected. Presently, target coverage problem is widely studied due to its lot of practical application in Wireless Sensor Network (WSN). This paper focuses on target coverage problem along with the minimum energy usage of the network so that the lifetime of the whole network can be increased. Since constructing a minimum connected target coverage problem is known to be NP-Complete, so several heuristics, as well as approximation algorithms, have been proposed. Here, we propose a heuristic for connected target coverage problem in WSN. We compare the performance of our heuristic with the existing heuristic, which states that our algorithm performs better than the existing algorithm for connected target coverage problem. Again, we have implemented the 2-connected target coverage properties for the network which provide fault tolerance as well as robustness to the network. So, we propose one algorithm which gives the target coverage along with 2-connectivity.

Although most of the studies on coverage and connectivity in wireless sensor networks (WSNs) considered two-dimensional (2D) settings, such networks can in reality be accurately modeled in a three-dimensional (3D) space. The concepts of continuum percolation theory best fit the problem of connectivity in WSNs to find out whether the network provides long-distance multihop communication. In this paper, we focus on percolation in coverage and connectivity in 3D WSNs. We say that the network exhibits a coverage percolation (respectively, connectivity percolation) when a giant covered region (respectively, giant connected component) almost surely spans the entire network for the first time. Because of the dependency between coverage and connectivity, the problem is not only a continuum percolation problem but also an integrated continuum percolation problem. Thus, we propose an integrated-concentric-sphere model to address coverage and connectivity in 3D WSNs in an integrated way. First, we compute the critical density lambdaC con above which coverage percolation in 3D WSNs will almost surely occur. Second, we compute the critical density lambdac con above which connectivity percolation in 3D WSNs will almost surely occur. Third, we compute the critical density lambdac cov-con above which both coverage and connectivity percolation in 3D WSNs will almost surely occur. For each of these three problems, we also compute their corresponding critical network degree. Our results can be helpful in the design of energy-efficient topology control protocols for 3D WSNs in terms of coverage and connectivity.

Efficient coverage and connectivity are two important factors that ensures better service quality especially during tracking targets or monitoring events in wireless sensor network. Although massive amount of studies has been carried out in the past to enhance coverage and connectivity issues, till date very few studies have witnessed a significant and standard outcomes that can opt further. Hence, this paper introduces a computationally efficient technique for jointly addressing both coverage and connectivity problems in large-scale wireless sensor network that ensures optimal network lifetime too. The proposed system has been empirically designed, and algorithms formulated to ensure energy efficient monitoring of event. The outcomes of the study are compared with standard energy efficient hierarchical protocol to benchmark the results.

Coverage in wireless sensor networks is a critical issue since it reflects the cost and detection capability of the network. Sensor coverage model is closely to the sensing functions of different types of sensors while network coverage is a collaborative measure from geographically distributed sensors. The coverage problems in wireless sensor networks have been formulated in various ways with different assumptions, constraints and objectives. In this work, a collaborative coverage model is proposed in the target surveillance application, while sensor sensing probabilistic model is introduced. Furthermore, a collaborative target coverage optimization algorithm (CTCOMSN) is presented to prolong the network lifetime in energy constraint mobile sensor networks. Simulation results show that CTCOMSN can prolong the lifetime greatly while improving the sensing quality.

Deployment is an important issue in wireless sensor networks (WSNs). Most recent researches focus on the optimal deployment strategy to achieve full coverage in WSNs. However, the sensing devices in practical applications are finite, and cannot achieve full coverage in the whole monitored region. Moreover, the monitored objects distribute unevenly, and thus the monitored significance differs from region to region. How to deploy limited number of sensors efficiently has been to an important issue. In this study, we propose a new coverage problem in WSNs, named N-node coverage, to acquire the maximum information about monitored objects with N sensors. In this problem, the captured information is used as the new evaluation metric for network coverage. On the basis of the metric, we establish the N-node network coverage model, and prove that the N-node coverage problem is NP-hard. The authors propose a heuristic algorithm for deployment, named optimisation schEme of N-node (OPEN), to obtain the near-optimal solution of the problem. Experimental results show that the OPEN can effectively improve the coverage performance of the WSNs, and is able to provide practical guideline for deployment of WSNs with limited number of nodes.

Aiming at the uneven random coverage distribution of wireless sensor networks sensor nodes, the sparrow search algorithm (SSA) is used to optimize the node coverage of wireless sensor networks. To improve the global search capability of SSA, the algorithm is improved and applied to the wireless sensor networks of bridge monitoring. For enhancing the coverage of the wireless sensor networks, this article uses two improved methods. One is to use the good point set theory to make the initial population evenly distributed; another is to introduce a weight factor to speed up its convergence. The experiments have proved the reliability and rationality of the algorithm. The improved algorithm is superior to other meta-heuristic algorithms and provides a new idea for optimizing bridge monitoring wireless sensor networks coverage.

Finding an optimal node deployment strategy in wireless sensor networks (WSNs) that would reduce cost, be robust to node failures, reduce computation, and communication overhead, and guarantee a high level of coverage along with network connectivity is a difficult problem. In fact, sensing coverage and network connectivity are two of the most fundamental problems in WSNs as they can directly impact the network lifetime and operation. In this paper, we consider deriving optimal conditions for connectivity with coverage in WSNs. Most versions of this problem are (NP-complete), while approximation algorithms cannot be developed for some versions of polynomial time, unless P = NP. Hence, we also develop a heuristic for some versions of the problem and the efficacy of the heuristic will be evaluated through extensive simulations. We are also interested in determining the probability of finding a path between a given pair of nodes over a given topology of WSNs. This will serve as a measure of connectivity with coverage of the network. Hence, we derive necessary and sufficient conditions for connectivity with coverage over a clustered structure in WSNs. Then, employing queuing networks modeling techniques, we present a dynamic programming study of the connectivity with coverage of clustered structure and its effect on routing in generalized WSNs. The performance evaluation of the proposed schemes shows that availability of nodes, sensor node coverage, and the connectivity were sufficiently enhanced to maximize network lifetime.

Wireless sensor networks (WSNs) include sensor nodes in which each node is able to monitor the physical area and send collected information to the base station for further analysis. The important key of WSNs is detection and coverage of target area which is provided by random deployment. This paper reviews and addresses various area detection and coverage problems in sensor network. This paper organizes many scenarios for applying sensor node movement for improving network coverage based on bioinspired evolutionary algorithm and explains the concern and objective of controlling sensor node coverage. We discuss area coverage and target detection model by evolutionary algorithm.

Wireless Sensor Networks (WSNs) can be used effectively to form barriers that monitor strips of land for applicaions such as homeland security and critical infrastructure protection. Sensors are highly constrained in their energy usage, so when they harvest energy, it is neccessary that this energy be used effectively. When WSNs are used as barriers, they are typically deployed for extended period of time, so it is of great importance that the network has a long lifetime. The lifetime problem for WSNs has been studied extensively. In this paper we give an exact solution to the problem of achieving maximum lifetime for the application of k-barrier coverage in energy harvesting wireless sensor networks.

Scheduling and power management schemes are the most important techniques to maximize the lifetime of Wireless Sensor Network (WSN). Therefore, the authors have proposed a scheduling algorithm for multiple-target coverage (MTC) problem in WSN. The proposed power-saving scheduling algorithm has been considered both the transmitting power and overlapped targets. Simulation result proves that the presented algorithm can prolong the network lifetime.

Exploring coverage and security challenges in wireless sensor networks: A survey

In this paper, we are concerned with energy efficient area monitoring using information coverage in wireless sensor networks, where collaboration among multiple sensors can enable accurate sensing of a point in a given area-to-monitor even if that point falls outside the physical coverage of all the sensors. We refer to any set of sensors that can collectively sense all points in the entire area-to-monitor as a full area information cover. We first propose a low-complexity heuristic algorithm to obtain full area information covers. Using these covers, we then obtain the optimum schedule for activating the sensing activity of various sensors that maximizes the sensing lifetime. The scheduling of sensor activity using the optimum schedules obtained using the proposed algorithm is shown to achieve significantly longer sensing lifetimes compared to those achieved using physical coverage. Relaxing the full area coverage requirement to a partial area coverage (e.g., 95% of area coverage as adequate instead of 100% area coverage) further enhances the lifetime.