Design of Portable Security System Using Face Recognition with Back-Propagation Algorithm and MATLAB

In order to evaluate pilot performance objectively, back propagation (BP) neural network model of 621423 form in topology with eye movement data was established. Data source of BP neural networks that came from former experiment and random interpolation was divided into training set and test set and normalized. Based on neural networks toolbox in Matlab, hidden layer nodes of BP networks were determined with empirical formula and experimental comparison ; BP algorithms in the toolbox were optimized; The training set data and test data were input into model for training and simulation; Pilot performance of the three skill levels was predicated and evaluated. The research shows that pilot performance can be accurately evaluated by setting up BP neural networks model with eye movement data and the evaluation method can provide a reference for flight training.

Instantaneous learning is a desirable feature in neural networks. This type of learning enables the network to be trained very quickly, typically in just one or two passes of the training set as opposed to hundreds or even thousands of passes for networks trained by an iterative process, such as the error backpropagation (BP) algorithm. This dissertation first reviews several existing types of neural networks with instantaneous learning capability. It then proposes a new network called the Fuzzy Classification (FC) Neural Network that can be trained with two passes of the training samples. The first pass assigns the synaptic weights for the input and output layers. The second pass determines the radius of generalization r for each training sample. The network exhibits fuzziness in two regards: (1) by fuzzification of the location of each training vector in the input space; and (2) by assigning fuzzy memberships of output classes to new input vectors. The operation of the FC network is analyzed from different perspectives, namely, separability of patterns, curve fitting and kernel regression. It is shown that one mode of operation of the FC network can be made to behave like a Radial Basis Function (RBF) network by proper choice of membership function and network parameter. The performance of the FC network as a pattern classifier is also discussed in a statistical framework. The generalization performance of the FC network is compared against that of the CC4 Comer Classification Neural Network, the RBF network, and the Multilayer Perceptron network trained by the BP algorithm. Experiments involving a Henon map time series, a Mackey-Glass time series, and a spiral pattern are used in the comparison. The performance of the FC network is found to be comparable to that of RBF and BP networks, and better than that of the CC4 network. Its performance is also more scalable than those of CC4 and RBF networks. Further, the time taken to design an FC network for any given problem is much shorter compared to the other three networks.

Summary form only give. Face recognition can be defined as the ability of a system to classify or describe a human face. The motivation for such system is to enable computers to do things like humans do and to apply computers to solve problems that involve analysis and classification. Face recognition systems require less user cooperation than systems based on other biometrics (e.g. fingerprints and iris), it is one of the most widely investigated biometric techniques for human identification and it can be used in applications such as access control, passport control, surveillance, criminal justice and human computer interaction. Face recognition is a specific case of object recognition. It is not a unique and rigid object. Indeed, Global features are sensitive to variations caused by emotional expressions, illumination, pose and occlusions. Neural networks have been widely used for applications related to face recognition and Backpropagation Neural Network (BPNN) is one of the most widely used methods in this domain. In this paper we present 3 solutions related to neural network for color face recognition. First we introduce learning-based dimension reduction algorithms. In the literature many methods are used to reduce the dimensionality of the subspace in which faces are presented. Recently, Random Projection (RP) has emerged as a powerful method for dimensionality reduction. It represents a computationally simple and efficient method that preserves the structure of the data without introducing very significant distortion. Our focus was to investigate the dimensionality reduction offered by RP and perform an artificial intelligent system for face recognition. According to the experimental results, we conclude that random projection is an optimal method of dimensionality reduction. In the case of our study, obtaining a higher FR rate depends, among others, on the choice of the random projection matrix and the dimension of the feature vector of original data. Secondly, we propose a hybrid method to achieve face recognition purpose using semi supervised BPNN. Traditionally, BPNN needs supervised training to learn how to predict results from desired data, the idea of our approach is to get the desired output of the network from an exterior classifier (SOM) and then apply the back propagation algorithm to recognize facial data. Experiments show that the results are satisfying in comparison with the supervised BPNN. Furthermore, we can deduce that the unlabeled vector in the training DB generally does not influence the recognition task and due to its generation ability the neural net can even correct some misclassified vectors. The third study concerns the use of Bhattacharyya distance to calculate the total error of the network. The error function generally used to train the neural network is Mean Square Error (MSE) based on Euclidean distance measure. In the experimental section we compare how the algorithm converge using the Mean Square Error and the Bhataccharyya distance and results indicated that the image faces can be recognized by the proposed system effectively and swiftly.

In applying neural network to identification, back propagation (BP) algorithm is usually trapped to a local optimum and has a low speed of convergence, whereas particle swarm optimization (PSO) is advantageous in terms of global optimal searching. In this paper, a new algorithms which combines guaranteed convergence particle swarm optimizer (GCPSO) algorithm with BP (Back Propagation) algorithm is introduced in this paper and applied to BP neural networks to optimize the parameters of BP neural networks so as to improve the convergence speed and precision of BP neural networks. Compared with the BP algorithm and PSO-BP algorithm, the results of the simulation show that the algorithm of BP Neural Network Model Based on Guaranteed Convergence Particle Swarm Optimization speeds up the convergence process and enhances the accurate rate in pattern recognition.

Accelerating neural network training using weight extrapolations

In this paper, we present an approach to recognizing characters in surface mount technology (SMT) product. The recognition rate of SMT product character is not very good, because of unexpected noise in SMT the product character image. An improved SMT product character recognition method is proposed which can improve the recognition rate. At first, the character image is changed into a gray image. Some appropriate image processing algorithms are used to eliminate the noise. Then, single character image is obtained after character segmentation and character normalization. Finally, a three-layer back propagation (BP) neural network module is constructed. In order to improve the convergence rate of the network and avoid oscillation and divergence, the BP algorithm with momentum item is used. As a result, the SMT product character recognition system is developed, and its implementation method and steps are introduced with practical examples. Experimental results indicate that the proposed character recognition can obtain satisfactory character-recognition rate and the recognition rate reached over by 98.6%.

Software Effort estimation involves the estimation of effort required to develop software. Cost overrun, schedule overrun occur in the software development due to the wrong estimate made during the initial stage of software development. Proper estimation is very essential for successful completion of software development. Lot of estimation techniques available to estimate the effort in which neural network based estimation technique play a prominent role. Back propagation Network is the most widely used architecture. ELMAN neural network a recurrent type network can be used on par with Back propagation Network. For a good predictor system the difference between estimated effort and actual effort should be as low as possible. Data from historic project of NASA is used for training and testing. The experimental Results confirm that Back propagation algorithm is efficient than Elman neural network.

The back propagation (BP) algorithm is the most popular supervised learning method for multi-layered feed forward Neural Network. It has been successfully deployed in numerous practical problems and disciplines. Regardless of its popularity, BP is still known for some major drawbacks such as easily getting stuck in local minima and slow convergence; since, it uses Gradient Descent (GD) method to learn the network. Over the years, many improved modifications of the BP learning algorithm have been made by researchers but the local minima problem remains unresolved. Therefore, to resolve the inherent problems of BP algorithm, this paper proposed BPGD-A3T algorithm where the approach introduces three adaptive parameters which are gain, momentum and learning rate in BP. The performance of the proposed BPGD-A3T algorithm is then compared with BPGD two term parameters (BPGD-2T), BP with adaptive gain (BPGD-AG) and conventional BP algorithm (BPGD) by means of simulations on classification datasets. The simulation results show that the proposed BPGD-A3T shows better performance and performed highest accuracy for all dataset as compared to other.

In order to forecast missile storage reliability better, the paper researched a forecasting method based on neural network which is with the ability of actualizing multi-nonlinear mapping from input to output, and discussed steps of forecasting based on back propagation (BP) network and radial basis function (RBF) network respectively. At last, the storage reliability of one type ship-to-ship missile is forecasted based on BP network and RBF network respectively. The results show that both of the BP and RBF are suitable for Missile storage reliability forecasting, and the precision of the train goal is better by using RBF network. RBF network is more suitable for dealing with this problem.

Predication of performance and emissions characteristics adual fuel engine energized with liquid and gaseous materials by Artificial neural network

For traditional human face based biometrics, usually one task (face recognition) is learned at one time. This single task learning (STL) approach may neglect potential rich information resources hidden in other related tasks, while multitask learning (MTL) can make full use of the latent information. MTL is an inductive transfer method which improves generalization by using the domain information contained in the training signals of related tasks as an inductive bias. In this paper, backpropagation (BP) network based MTL approach is proposed for face recognition. The feasibility of this approach is demonstrated through two different face recognition experiments, which show that MTL based on BP neural networks is more effective than the traditional STL approach, and that MTL is also a practical approach for face recognition.

In this study, three artificial neural network (ANN) models are developed with back propagation (BP) optimization algorithms to predict various lightning damage modes in carbon/epoxy laminates. The proposed ANN models use three input variables associated with lightning waveform parameters (i.e., the peak current amplitude, rising time, and decaying time) to predict fiber damage, matrix damage, and through-thickness damage in the composites. The data used for training and testing the networks was actual lightning damage data collected from peer-reviewed published literature. Various BP training algorithms and network architecture configurations (i.e., data splitting, the number of neurons in a hidden layer, and the number of hidden layers) have been tested to improve the performance of the neural networks. Among the various BP algorithms considered, the Bayesian regularization back propagation (BRBP) showed the overall best performance in lightning damage prediction. When using the BRBP algorithm, as expected, the greater the fraction of the collected data that is allocated to the training dataset, the better the network is trained. In addition, the optimal ANN architecture was found to have a single hidden layer with 20 neurons. The ANN models proposed in this work may prove useful in preliminary assessments of lightning damage and reduce the number of expensive experimental lightning tests.

Digital image recognition of plant diseases could reduce the dependence of agricultural production on the professional and technical personnel in plant protection field and is conducive to the development of plant protection informatization. In order to find out a method to realize image recognition of plant diseases, four kinds of neural networks including backpropagation (BP) networks, radial basis function (RBF) neural networks, generalized regression networks (GRNNs) and probabilistic neural networks (PNNs) were used to distinguish wheat stripe rust from wheat leaf rust and to distinguish grape downy mildew from grape powdery mildew based on color features, shape features and texture features extracted from the disease images. The results showed that identification and diagnosis of the plant diseases could be effectively achieved using BP networks, RBF neural networks, GRNNs and PNNs based on image processing. For the two kinds of wheat diseases, the best prediction accuracy was 100% with the fitting accuracy equal to 100% while BP networks, GRNNs or PNNs were used, and the best prediction accuracy was 97.50% with the fitting accuracy equal to 100% while RBF neural networks were used. For the two kinds of grape diseases, the best prediction accuracy was 100% with the fitting accuracy equal to 100% while BP networks, GRNNs or PNNs were used, and the best prediction accuracy was 94.29% with the fitting accuracy equal to 100% while RBF neural networks were used.

This paper combined Rumelhart’s adding inertial impulse and dynamically adjusting the learning rate and proposed an improved algorithm to optimize the Back Propagation (BP) networks with applied technology. This improved BP networks is used to determining membership function and applied in fuzzy diagnosing vapor congealing equipment. The application results prove that the improved BP algorithm is effective and the convergence speed is accelerated and is much faster than the classic BP algorithm. The applied technology is very useful in the application course.

In order to achieve effective prediction and control the size of outlet concentration of Carbon Dioxide (CO 2), but also in view of PSO compared to other neural network, which has a fast convergence characteristics such as particle swarm, neural network model proposed is to predict the outlet concentration of CO 2, and this model is studied. obtained PSO – BP (Particle Swarm Optimization- Back Propagation) algorithm proposed to the square and - death e2pso BP 1.6892, by using 8.0 (r2009a) matlab7 for data analysis and simulation study, which shows their very strong fitting ability, proved further by contrasting PSO-BP algorithm with GA – BP (General Anesthesia- Back Propagation) algorithm and BP algorithm. In this paper, experimental data have been used to establish GA-BP model and BP model, on the other hand Theses models have been used to analyze these data and make simulation studies separately, furthermore, these three models will be compared, the results from which further proved the PSO-BP model stronger in fitting ability.