Differential subordinations and inequalities in the complex plane

There are over one hundred articles in the literature dealing with second-order differential inequalities and differential subordinations in the complex plane, and only two articles dealing with very narrow classes of third-order results. This article addresses a much more general class of third-order differential inequalities and subordinations. Let Ω and Δ be given sets in , let p be an analytic in the unit disc with . The authors determine the conditions on an admissible class of operators , so that the third-order differential subordination implies . Applications of these results to third-order differential inequalities, third-order differential subordinations, univalent functions and Bessel functions are presented.

Sanford S. Miller and Petru T. Mocanu’s theory of second-order differential subordinations was extended for the case of third-order differential subordinations by José A. Antonino and Sanford S. Miller in 2011. In this paper, new results are proved regarding third-order differential subordinations that extend the ones involving the classical second-order differential subordination theory. A method for finding a dominant of a third-order differential subordination is provided when the behavior of the function is not known on the boundary of the unit disc. Additionally, a new method for obtaining the best dominant of a third-order differential subordination is presented. This newly proposed method essentially consists of finding the univalent solution for the differential equation that corresponds to the differential subordination considered in the investigation; previous results involving third-order differential subordinations have been obtained mainly by investigating specific classes of admissible functions. The fractional integral of the Gaussian hypergeometric function, previously associated with the theory of fuzzy differential subordination, is used in this paper to obtain an interesting third-order differential subordination by involving a specific convex function. The best dominant is also provided, and the example presented proves the importance of the theoretical results involving the fractional integral of the Gaussian hypergeometric function.

In this paper, we obtain some new sufficient conditions for starlikeness of order $\alpha$ of biholomorphic mappings on the unit ball in $C^n$ or a complex Hilbert space $X$ by using differential inequalities. We also obtain a distortion theorem and a covering theorem. As their special case, we obtain some sufficient conditions for starlikeness of order $\alpha$ of analytic functions on the unit disc in the complex plane $C$, which generalize some results of P. T. Mocanu and G. Oros.

The goal of this paper is to investigate some of the features of differential subordination of analytic univalent functions in an open unit disc. In addition, it has shed light on geometric features such as coefficient inequality, Hadamard product qualities, and the Komatu integral operator. Some intriguing results for third-order differential subordination and superordination of analytic univalent functions have been installed. Then, using the convolution of two linear operators, certain results of third order differential subordination involving linear operators were reported. As a result, we use features of the Komatu integral operator to analyze and study third-order subordinations and superordinations in relation to the convolution. Finally, several results for third order differential subordination in the open unit disk using generalized hypergeometric function have been addressed using the convolution operator.

Let α e [0,1]p be an analytic function in the unit disc E q and h be analytic and univalent functions in E, Φ be an analytic function in a certain domain D⊃ q (E). The authors study the differential subordinations and where z⊂E Examples of the application of these results are given.

Integral inequalities and second order linear oscillation

Background The study of theory for analytic univalent and multivalent functions is an old subject in mathematics, particularly in complex analysis, that has captivated a great deal of scholars owing to the sheer sophistication of its geometrical features as well as its many research possibilities. The study of univalent functions is one of many significant elements of complex analysis for both single and multiple variables. Investigators have become keen on the conventional investigation of this topic since at least 1907. Numerous scholars in the area of complex analysis have emerged since then, including Euler, Gauss, Riemann, Cauchy, and other people. Geometric function theory combines geometry and analysis. Methods This study employs the differential subordination technique to derive multiple characteristics from the new linear operator M σ , μ n , ς Υ ( s ) . The concept of the differential subordination subclass of analytical univalent functions is analyzed. Results In this section, We studied some results on differential subordination and superordination using a specific class of univalent functions stated on a specific space of univalent functions stated on the open unit disc. Using properties of the operator, we discovered a number of properties of superordinations and subordinations related to the idea of the Hadamard product. We investigated several aspects of superordinations and subordinations using a new operator M σ , μ n , ς Υ ( s ) . Conclusions A new operator M σ , μ n , ς Υ ( s ) : Λ ⟶ Λ has been established in this paper connected to the Dziok-Srivastava operator T σ n and the Hadamard product corresponding to the Komatu integral operator Ω μ ς . The difference operator M σ , μ n , ς ϒ ( s ) can have specific properties derived by applying the differential subordination technique. And the objective of this paper is to make use of the connection ( β 1 μ + 1 ) M σ , μ n + 1 , ς ϒ ( s ) = w ( M σ , μ n , ς ϒ ( s ) ) ′ + β 1 μ ( M σ , μ n , ς ϒ ( s ) ) .

The following Reprint contains a total of 19 articles accepted and published in the Special Issue "Fractional Differential Equations, Inclusions and Inequalities with Applications II" of the MDPI journal Mathematics and covers various aspects of recent developments in the theory and applications of fractional differential equations, inclusions, inequalities, and systems of fractional differential equations and inclusions. Topics include, but are not limited to, the following themes: Oscillation for fractional-order differential equations, (p,q)-difference equations, q-difference inclusions, Integral inequalities, Fractional integro-differential equations, Sequential fractional differential equations, Sequential fractional differential inclusions, Numerical fractional differential equations, -fractional differential equations, Positive solutions for fractional boundary value problems, Stochastic fractional differential equations, Fractional-order systems, Caputo fractional differential equations, Delay difference equations, and BlackScholes fractional equations. In total, 80 manuscripts were submitted, and 19 papers by 68 authors from 21 countries were successfully published. It is hoped that the Reprint together with the ideas and publications therein will be of interest to readers and will inspire new studies on fractional differential equations, inclusions and inequalities.

Convex and alpha-prestarlike subordination chains

State space methods for solving tangential interpolation problems for matrix functions in a given class have been developed extensively. These are interpolation problems in which the values in certain directions of the interpolant matrix functions, and several of their derivatives, are prescribed at given points in the complex plane. For the most part, the matrix functions under consideration are rational functions or polynomials (perhaps with symmetries); however, other important classes of matrix functions have been studied as well, notably, the Nevanlinna classes on the unit disk and the upper half-plane, and the Hardy class H/sub 2/ on the unit disk. This development is motivated by many important applications in systems and control. We present some recent results and open problems in this area.

INTRODUCTION. This note concerns Riemann mappings of rectangles onto the unit disk in the complex plane. Let's fix some notation for the discussion. For the unit circle and unit disk we'll use, respectively, S1 and D. For the rectangle parallel to the coordinate axes, centered at the origin 0 E C with height 1 and base length a > 0, so that the corners are at (?a/2, ? 1/2), we'll use R(a). In particular, it will be convenient to have R(b) c R(a) if b < a. Riemann's mapping theorem says that every simply connected plane domain Ql not equal to the whole plane can be mapped conformally one-to-one onto D. Thus this certainly holds for the interior of rectangles. These maps are thoroughly well understood from several points of view, primarily using the Schwarz-Christoffel formula (elliptic functions in a not too subtle disguise). The purpose of this note is to show that rectangles with different modulus (different values of a) can be seen as conformally different and completely characterized by sets of four distinct points on S with very little machinery. In fact, our only tools will be the Schwarz reflection principle, the Schwarz lemma (in other words, Schwarz seemed to have a pretty good sense about this sort of thing), some elementary conformal mappings, and the concept of normal families of analytic functions. Perhaps then the real purpose of this note is to serve as a reminder of the power of the profound, beautiful, and essentially elementary maximum modulus principle. The only reference necessary for this discussion is [A]. The theorem of Lowner may also be found in [C]. The proof given there is of a somewhat different flavor, and Lowner's proof [L] was roughly the same as the one given here.

Let w(z) be regular in the unit disc U:|z|&lt;l, with w(0) = 0 and let h(r, s, t) be a complex function defined in a domain D of C3. The author determines conditions on h such that ifz∈U, then |w(z)|&lt; 1 for z ∈ U and n= 0, 1, 2, …. Here Dnw(z) = (z/(l-z)n+1*w(z), where * stands for the Hadamard product (convolution). Some applications of the results to certain differential equations are given.

Let Ω be a domain in the complex plane \(\mathbb{C}\) containing the origin and let \({\cal P}_{n}^{0}(\Omega)\) denote the set of all polynomials P of degree ≤ n satisfying the conditions \(P(0)=0\) and \(P(\mathbb{D})\subset \Omega\), where \(\mathbb{D}=\left\{z\,:\,\,|z|<1\right\}\) is the unit disk in the complex plane. The maximal range, denoted by Ω n , is then defined as the union of all sets \(P(\mathbb{D}), P \in {\cal P}_{n}^{0}\) .We shall construct extremal polynomials and maximal polynomial range for a domain of intersection of two circular disks.

We study the integration operator between the growth spaces $$H_w^\infty $$ and $$H_u^\infty $$ on the complex plane with arbitrary radial weights w and u. Also, we investigate the differentiation operator on the Hardy growth spaces $$H_w^p$$ , $$0<p<\infty $$ , defined on the unit disk or on the complex plane. As in the case $$p=\infty $$ , the log-convex weights w play a special role in the problems under consideration.

Recently, complex fuzzy sets have become a powerful tool for expanding the range of fuzzy sets that are located in a unit disk within complex plane. In this article, the complex fuzzy numbers are discussed and implemented to handle complex fractional fuzzy partial differential equation involving complex time-fractional fuzzy heat equation in sense of Hukuhara differentiability. After that, an explicit finite difference scheme known as the forward time center space are implemented to solve complex time-fractional fuzzy heat equations. The uncertainty present in our problem appears in the boundary and initial conditions as well as coefficients in both amplitude and phase terms simultaneously where the Convex normalized triangular fuzzy numbers are extended to unit disk in the complex plane. The properties and benefits of complex fuzzy set theory have been employed in the proposed numerical methods. A numerical experiment is used to showcase the efficiency and practicality of the presented method. The obtained outcomes are found to be consistent with the exact solution and related theoretical concepts.