Differentiated services architecture for QoS provisioning in Wireless Multimedia Sensor Networks

Applying multimedia to Wireless Sensor Network (WSN) adds more challenges due to WSN resource constraints and the strict Quality of Service (QoS) requirements for multimedia transmission. Different multimedia applications may have different QoS requirements, so routing protocols designed for Wireless Multimedia Sensor Network (WMSN) should be conversant of these requirements and challenges in order to ensure the efficient use of resources to transfer multimedia packets in an utmost manner. The majority of solutions proposed for WMSN depends on traditional layered based mechanisms which are inefficient for multimedia transmission. In this paper we propose a cross-layer Ant based Routing Protocol for WMSN (CARPM) by using modified ant colony optimization (ACO) technique to enhance the routing efficiency. The proposed protocol uses an improved ACO to search for the best path that are satisfied with the multimedia traffic requirements. While making best decision the weightage is given to energy consumption, and queuing delay. The proposed cross layer scheme works between the routing, MAC, and physical layers. Since, the remaining power and timestamp metrics are exchanged from physical layer to network layer. Dynamics duty cycle assignment is proposed at MAC layer which changes according to traffic rate. The presented algorithm is simulated using NS2 and is proven to satisfy its goals through a series of simulations.

In the networking research community, Wireless Sensor Networks (WSN) has achieved considerable significance in the past years and it can be used in extensive variety of domains. In recent years, the tremendous growth of WSN does not meet all the necessities of environmental monitoring. Wireless Multimedia Sensor Network (WMSN) is required to fulfill the requirements of environment monitoring. In this paper, WMSN is used to monitor the agriculture soil environment. In order to ensure optimal use of the sensor nodes in WMSN and accurate access to the collected data,the routing protocols with both energy efficiency and quality of service ( QoS) properties are necessary for the transmission of photo, video and scalar data.This paper proposes a priority aware energy efficient QoS based data transmission for agriculture soil environment and also detects the pest. It utilizes the available bandwidth and data rate in the best way and in order to be more energy efficient during data transmission.For performance analysis, the proposed system is simulated using Java and the results of the experiments suggest that the proposed algorithm is more efficient compared to other methods in terms of delay and energy consumption.

Improvements in nanotechnology have introduced contemporary sensory devices that are capable of gathering multimedia data in form of images, audio and video. Wireless multimedia sensor networks handles such type of heterogeneous traffic. Since these networks are an emergent of wireless sensor networks, they inherit constraints that exist in these traditional networks. This paper is a survey of characteristics and requirements of wireless multimedia sensor networks and approaches to mitigating existing challenges in these networks. Further presents a review of recent research on multipath routing protocols and multi-channel media access protocols that offer quality of service assurances in handling multimedia data. The survey shows that there still exist bottlenecks in current routing solutions when applied to wireless multimedia sensor networks due to the nature of traffic involved as well as inherent characteristics, requirements and constraints. The findings are useful in the discovery of solutions to the challenges and issues. The authors further suggest approaches and plausible solutions to the problems in order to assist in the development of protocols that achieve quality of service in wireless multimedia sensor networks.

With the advancement of wireless sensor networks (WSNs) and technology, applicability of WSNs as a system is touching new heights. The development of multimedia nodes has led to the creation of another intelligent distributed system, which can transfer real-time multimedia traffic, ubiquitously. Wireless multimedia sensor networks (WMSNs) are applicable in a wide range of areas including area monitoring and video surveillance. But due to unreliable error-prone communication medium and application specific quality of service (QoS) requirements, routing of real-time multimedia traffic in WMSNs poses a serious problem. The paper discusses various existing routing strategies in WMSNs, with their properties and limitations which lead to open research issues. Further, detailed classification and analytical comparison of discussed protocols are also presented.

The use of wireless multimedia sensor networks (WMSNs) for surveillance applications has attracted the interest of many researchers. As with traditional sensor networks, it is easy to deploy and operate WMSNs. With inclusion of multimedia devices in wireless sensor networks, it is possible to provide data to users that is more meaningful than that provided by scalar sensor-based systems alone; however, producing, storing, processing, analyzing, and transmitting multimedia data in sensor networks requires consideration of additional constraints, including energy, processing power, storage capacity, and communication. Furthermore, as multimedia sensors produce much more data than scalar sensors, more manpower is required to analyze multimedia data. To overcome these constraints and challenges, this paper aimed to propose a system architecture and a set of procedures for WMSNs that facilitate automatic classification of moving objects using scalar and multimedia sensors. Methods and standards for detecting and classifying a moving object, as well as transmission of the results, are described in detail. The hardware for each sensor node includes a built-in camera, a passive infrared motion sensor, a vibration sensor, and an acoustic sensor. An application using our proposed methods was developed and embedded in the multimedia sensor node. In addition, a sink station was set up and the data produced by the sensor network was collected by this server. The classification performance of the application was tested using video recorded by the sensor node. The effect of the proposed methods on power consumption was also tested and measured. The experimental results show that the proposed approach is sufficiently lightweight to be used for real-world surveillance applications.

Wireless Sensor Network (WSN) has limited resources such as energy, computation and transmission capacity. These resources are not sufficient for transmitting large amount of data collected by the sensor nodes. Wireless Multimedia Sensor Network (WMSN) generates large amount of data that requires more energy and transmission capacity as compared to scalar data. So it is desired to perform in-network data compression in WMSN. In this paper the authors have used Principal Component Analysis (PCA) technique for data compression. PCA can be efficiently used in wireless multimedia sensor network to reduce the energy consumption, reduce the network load and prolong the network lifetime. Simulation results show that PCA based compression conserves energy of sensor nodes and prolongs the lifetime of WMSN.

Multimedia applications are routed from source nodes via neighboring nodes to a sink in Wireless Multimedia Sensor Networks (WMSNs). However, the existing routing protocols in the WMSNs do not fulfill the quality of service (QoS) constraint yet for multimedia transmission. The WMSNs have specific characteristics such as multi-hop way, limited node capability and varying bandwidth, which can affect the quality of service of multimedia applications during the routing process. The best quality of service (QoS) is required by the multimedia applications consisting of high throughput, low end-to-end delay and low packet drop rate. A routing optimization based on the cross-layer design is proposed for multimedia transmission in the WMSNs. The cross-layer design utilizes H.264/Scalable Video Coding (SVC) and IEEE 802.11e Enhanced Distributed Channel Access (EDCA) and has been implemented in Network Simulator 2 (NS2) simulation. The NS2 simulation indicates that the H.264/SVC video application has an average delay of 0.02 sec. Thus, the routing optimization has accomplished to deliver multimedia application successfully via Wireless Multimedia Sensor Network (WMSN).

One of the remarkable challenges in the area of Wireless Sensor Networks (WSNs) is how to route the collected data and transfer them in the nodes. Due to the high rate of packet loss, guaranteeing reliable and efficient packet transfer and delivery is considered to be one of the hot issues in the area of WSNs. Indeed, due to energy limitation of nodes in WSNs, reliability and energy are regarded as critical parameters in these networks. In this paper, a method has been proposed for optimizing the parameters of reliability and energy consumption in multimedia WSNs. In the proposed protocol, Increasing the Delivery Ratio with Network Coding (IDRNC) a network coding mechanism has been used for transmitting data which enhances the reliability of the network. Furthermore, reducing the number of transmissions and receptions in network nodes results in the reduction of energy consumption. In the proposed protocol, the transmitted packets are first coded and transmitted to the sink through the shortest route. In the middle of the route, in case packets are lost, median nodes can detect and recover the lost packet through the coded packet. The simulation results indicated that the method proposed in this study operates better than the LIEMRO method with respect to the following features: system efficiency, average remaining energy of the network, the number of lost packets and reliability. Keywords: Multipath Routing, Network Coding, Reliability, Wireless Multimedia Sensor Networks (WMSNs)

The increasing availability of low-cost hardware along with the rapid growth of wireless devices has enabled the development of Wireless Multimedia Sensor Networks (WMSNs). Multimedia content such as video and audio streaming is transmitted over a WMSN which can easily be deployed with low cost. However, enabling real-time data applications in those networks demands not only Quality of Service (QoS) awareness, but also efficient energy management. Sensor network devices have limited energy resources. The limited energy poses significant threats on the QoS of WMSNs. In this paper, to improve the efficiency of QoS-aware routing, we examine an angle-based QoS and energy-aware dynamic routing scheme designed for WMSNs. The proposed approach uses the inclination angle and the transmission distance between nodes to optimize the selection of the forwarding candidate set and extend network lifetime. Simulation results indicate that considerable lifetime values can be achieved.

Wireless sensor networks (WSNs) abiding a huge quantity of inexpensive, low consumption and intense sensor nodes and sole or additional decline or base stations. Those nodes are tiny in dimension and can carry out numerous significant affairs, as well as event sensing, in order processing, and data communication. Owed to different compensation such as simplicity of consumption, comprehensive transmission range, and identity association, WSNs have been interchanging the conventional networks. The promising and innovative network of wirelessly connected devices, which consist of video, audio streams, scalar sensor data and others, is Wireless Multimedia Sensor Network (WMSN). The multimedia data depends on superiority to overhaul (Qos) parameters, like await, channel utilization, network life time throughput and distortion etc is the main aim to optimized delivery of these networks. In multimedia network each packets are communicated with each other so not on time incoming packets and lots of packets are evenly. In WMSNs challenging task to guarantee resource constrained, high data rate, and soft delay limit beside with energy reduced. In this paper, we provide Survey on comparison of different protocol of Wireless sensor network and wirelesss multimedia sensor network like Greedy Perimeter Stateless Routing for Wireless Networks (GPSR), Real-time and Energy Aware Qos routing protocol (REAR), Temporary ordered routing Algorithm (TORA) and Dynamic source routing (DSR). This different protocols with WMSN are compared in requisites of throughput, end-to-end delay, network life time.

The smart grid incorporates a two-way communication system between customers and the utility for advanced monitoring and intelligent control of supply and demand. Wireless multimedia sensor network can be treated as an organic supplement and a peripheral network in this two-way communication system. However, the challenging smart grid environment makes it difficult to achieve a high quality of service in wireless multimedia sensor network. This article proposes a prioritization mechanism that considers the heterogeneous characteristics of smart grid traffic. Specifically, an innovative channel allocation and traffic scheduling scheme, named the preemptive tidal flow queuing model, is presented. This scheme achieves differentiated services for diverse communication data when the wireless multimedia sensor network accesses the core network and ensures the performance for high-priority data at the expense of the performance for low-priority data. Simulation analyses show that the performance for high-priority messages can be reliably guaranteed and that the preemptive tidal flow queuing model satisfies the requirements for a wireless multimedia sensor network operating in the smart grid environment. This article offers three main contributions: the development of a prioritization mechanism specifically for a wireless multimedia sensor network in the smart grid environment, the proposal of the preemptive tidal flow queuing model, and the presentation of formulas and simulations to verify the performance of the preemptive tidal flow queuing model.

Congestion in Wireless Sensor Network (WSN) occurs when traffic load allocated to any sensor node is beyond its capacity. It is necessary to control the congestion traffic to support traditional quality of service (such as packet loss ratios, packet delay, wasting energy and throughput) especially, multimedia application of Wireless Multimedia Sensor Network (WMSN). Congestion control in WSN has been shown to be very effective with respect to extending lifespan of system. Hence to avoid the congestion in WSN, we proposed an efficient protocol called Priority-based Congestion Control Protocol (PCCP) which prevents an upstream congestion in WSN. The PCCP creates priority table based an importance of each node, and then sends this information to all the nodes within the network. Secondly, the major function of PCCP is to measure congestion level in the network using ratio of packet inter-arrival time along over packet service time. PCCP uses to control upstream congestion along with congestion degree and packet table. PCCP is hop-by-hop upstream congestion control protocol for WSN. PCCP provides work for packet-based computation to optimize congestion control. It can work under both single path & multipath routing. PCCP ensures guarantee of packet loss as well as delay, resulting each node can avoid unfairness and achieve flexible throughput. In this paper, we have proposed that PCCP provides better QoS by controlling network recourse management and network traffic to consuming efficient energy.

New security approach in real-time wireless multimedia sensor networks

Simple data, such as temperature, humidity and luminary, gathered by nodes in wireless sensor networks (WSNs), can hardly meet the growing needs for real-time information. The availability of low-cost hardware is enabling the development of wireless multimedia sensor networks (WMSNs), i.e., networks of resource-constrained wireless devices that can retrieve multimedia content such as video and audio streams, still images, and scalar sensor data from the environment. However, multi-function means complex design, effective hardware, robust protocol and many other considerations. Comparing some of those current mainstream WMSN test beds, limits and shortcomings can be easily found. In this paper, MR. Eye is designed. Nodes, within MR. Eye, built on OMAP3530, are capable of coping with video, images and other real-time information. Moreover, the load balanced airtime with energy awareness (LBA-EA) is applied in this system and nodes can be easily controlled by SNMP gateway. The last but not the least, real-time video data can be transmitted fluently in multi-hop scenarios.

Multimedia applications have become an essential part of our daily lives, and their use is flourishing day by day. In Wireless Multimedia Sensor Networks (WMSNs), large volume of multimedia data is transmitted through the network. If the traffic load is greater than the available capacity of the sensor network, congestion occurs and it causes buffer overflow, packet drop, deterioration of network throughput and effect quality of service (QoS). The limited bandwidth should be adjusted for the packets with different priorities precisely. To emphasize the problem, the paper provides A New Approach for Traffic Management in Wireless Multimedia Sensor Network. According to the paper, sensor nodes in one collision area can adjust their sending states adaptively based on packet priority. To improve the received video quality in base stations, proposed technique keeps the I-frames and ignores the other less important frame types of compressed video. Also retransmissions of lost packets are provided with different priorities for enhancing the system performance. The simulations show that the bandwidth adjustment can protect the packets with high priority effectively, and the performance of the retransmission is well positioned to meet the requirement of the multimedia applications. MATLAB is used for simulation purpose.