Distributed MPC of polytopic uncertain systems: handling quantised communication and packet dropouts

This paper integrates the wind turbines (WTs) into the interconnected power system and designs a distributed model predictive control (DMPC) controller for the primary frequency regulation problem. The WTs have been treated as a part of the power system to take part in primary frequency regulation with load disturbances. A frequency response model of multi-area power system including WTs is introduced, in which the physical constraints of the governors and turbines are considered. The distributed model predictive controller is designed by posing the primary frequency regulation problem as disturbance rejection problem of large system with state and input constraints. Analysis and simulation results for a two-area interconnected power system with WTs show possible improvements on closed-loop performance, while respecting physical hard constraints. Comparisons have been made made between the DMPC controller with and without WTs. The results confirm the superiority of the proposed DMPC scheme with the participation of the wind turbines in the primary frequency regulation.

In this study, an approach to design robust distributed model predictive control (MPC) is proposed for polytopic uncertain networked control systems with time delays. To reduce the computational complexity and improve the flexibility, the entire system is decomposed into multiple smaller dimensional subsystems. For each subsystem, the proposed robust distributed MPC algorithm requires solving multiple linear matrix inequality optimisation problems to minimise an upper bound on a robust performance objective. An augmented polytopic uncertainty description is invoked to handle the input delays. The conservativeness of distributed MPC algorithm is reduced by utilising a sequence of feedback control laws. An iterative on‐line algorithm for robust distributed MPC is developed to coordinate the distributed MPC controllers. Convergence and robust stability of the proposed distributed MPC are investigated. A numerical example is carried out to demonstrate the effectiveness of the proposed algorithm.

Designing a stabilized distributed model predictive control (DMPC) with constraints is an open and important problem for a class of large-scale distributed systems, which are composed by both weakly and strongly coupled subsystems. This paper proposes a design of DMPC network to stabilize this class of large-scale systems. A coupling degree-based clustering method is first designed to classify subsystems into some middle-scale subsystems (M-subsystem) off-line according to the adjacent matrix, so that these M-subsystems are weakly coupled with each other. Then, each M-subsystem is controlled by a virtual model predictive control (MPC), which is realized by several individual controllers with running iterative cooperative DMPC algorithm, since the solution of cooperative DMPC is able to converge to a fixed point without coupling constraints. Each MPC communicates with the corresponding interacted M-subsystems’ MPCs once in a control period for exchanging future state evolution estimation. All the subsystem-based MPCs are composed of the proposed peer-to-peer DMPC network. In addition, an additional consistency and stabilization constraints are added to guarantee the recursive feasibility and stability of the overall system. The convergence of the iterative DMPC algorithm for each M-subsystem and the stabilization analysis of the overall system are provided. The simulation results show the efficiency of the proposed method. Note to Practitioners —The proposed method is designed for the systems, which are composed of both strong and weak coupling subsystems and are controlled in a distributed structure. The aim of this method is to design a distributed model predictive control (MPC) network for the operational optimization of entire system. The designed control structure and the distributed MPC algorithm with the proposed method could guarantee the recursive feasibility and asymptotic stability of the entire system. To apply this method, the first step is to obtain the models of each subsystem. Then, design the distributed MPC network structure according to the proposed cluster algorithm, which determines the set of subsystems that each virtue MPC controls. Next step is to configure the network information exchanging among these subsystems and construct the optimization problem of each subsystem. Finally, use the existing quadratically constrained quadratic program solvers to calculate the optimal control laws and apply these optimal control laws to the corresponding subsystems. This method can be used in large-scale chemical processes, air conditioner systems for multizone buildings, distributed energy generation systems, and so on.

A distributed approach to model-predictive control of radiant comfort delivery systems in office spaces with localized thermal environments

ABSTRACTIn this work, synthesis of robust distributed model predictive control (MPC) is presented for a class of linear systems subject to structured time-varying uncertainties. By decomposing a global system into smaller dimensional subsystems, a set of distributed MPC controllers, instead of a centralised controller, are designed. To ensure the robust stability of the closed-loop system with respect to model uncertainties, distributed state feedback laws are obtained by solving a min–max optimisation problem. The design of robust distributed MPC is then transformed into solving a minimisation optimisation problem with linear matrix inequality constraints. An iterative online algorithm with adjustable maximum iteration is proposed to coordinate the distributed controllers to achieve a global performance. The simulation results show the effectiveness of the proposed robust distributed MPC algorithm.

This paper concerns a distributed model predictive control (DMPC) strategy in which each controller views the signals from other subsystems as disturbance inputs in its local model. The DMPC controllers exchange predictions on the bounds of their state trajectories and incorporate this information into their local DMPC problems. They also impose their own predicted state bounds as constraints in subsequent DMPC iterations to guarantee their subsystem satisfies the bounds broadcast to the other controllers. Each controller solves a local min-max problem on each iteration to optimize performance with respect to worst-case disturbances. Parameterized state feedback is introduced into the DMPC formulation to obtain less conservative solutions and predictions. The paper presents sufficient conditions for feasibility and stability. The approach is illustrated with an example.

In this paper, a platoon keeping and collision avoidance method based on distributed model predictive control(DMPC) is proposed to solve the problem of arbitrary communication chain malfunctions under a bidirectional-leader topology. Firstly, for the platoon under normal communication, a DMPC controller is designed by using the trajectory information of the leader and predecessor vehicle, which also satisfies the situation when communication chain between the follower (except follower 1) and the leader malfunction. Secondly, for other communication chain malfunction situation, we proposed the corresponding communication topology transformation scheme and controller transformation scheme, which makes the proposed control scheme can adapt to arbitrary communication chain malfunction situation. Finally, as for the control strategy proposed in this paper, some simulation experiments are carried out.

Fil: Giovanini, Leonardo Luis. Consejo Nacional de Investigaciones Cientificas y Tecnicas. Centro Cientifico Tecnologico Conicet - Santa Fe. Instituto de Investigacion en Senales, Sistemas e Inteligencia Computacional. Universidad Nacional del Litoral. Facultad de Ingenieria y Ciencias Hidricas. Instituto de Investigacion en Senales, Sistemas e Inteligencia Computacional; Argentina

Partitioned Based Cooperative Distributed Model Predictive Control for Large-Scale Nonlinear Systems

Combined environmental and economic dispatch of smart grids using distributed model predictive control

This work focuses on a class of nonlinear control problems that arise when new control systems which may use networked sensors and/or actuators are added to already operating control loops to improve closed‐loop performance. In this case, it is desirable to design the pre‐existing control system and the new control system in a way such that they coordinate their actions. To address this control problem, a distributed model predictive control method is introduced where both the pre‐existing control system and the new control system are designed via Lyapunov‐based model predictive control. Working with general nonlinear models of chemical processes and assuming that there exists a Lyapunov‐based controller that stabilizes the nominal closed‐loop system using only the pre‐existing control loops, two separate Lyapunov‐based model predictive controllers are designed that coordinate their actions in an efficient fashion. Specifically, the proposed distributed model predictive control design preserves the stability properties of the Lyapunov‐based controller, improves the closed‐loop performance, and allows handling input constraints. In addition, the proposed distributed control design requires reduced communication between the two distributed controllers since it requires that these controllers communicate only once at each sampling time and is computationally more efficient compared to the corresponding centralized model predictive control design. The theoretical results are illustrated using a chemical process example. © 2009 American Institute of Chemical Engineers AIChE J, 2009

This is a position paper on the current state of the art in distributed Model Predictive Control (MPC) and our view on its future potential. We present results from a recent survey of 35 distributed MPC approaches. For this, we propose a way in which distributed MPC approaches can be categorized for comparison. We also link the potential that these approaches have to the domain of other fields such as integrated environmental optimal decision making and cyber-physical systems. Many challenges for realizing these links have to be faced. We present our views on how the advances in several highly active research domains could be used to overcome these challenges. As such, this paper is intended as a starting point for the exploration of various novel research cooperations.

This paper is concerned with the distributed model predictive control (MPC) problem for a class of discrete-time Markovian jump linear systems (MJLSs) subject to actuator saturation and polytopic uncertainty in system matrices. The global system is decomposed into several subsystems which coordinate with each other. A set of distributed controllers is designed by solving a min-max optimization problem in terms of the solutions of linear matrix inequalities (LMIs). An iterative algorithm is developed to achieve the online computation. Finally, a simulation example is employed to show the effectiveness of the proposed algorithm.

This paper investigates intersection control of multiple vehicles using a Model Predictive Control (MPC) framework. Vehicles follow pre-defined paths across the intersection and adjust their velocities to ensure collision-free passage while maximizing an objective. We choose a non-cooperative Distributed Model Predictive Control (DMPC) approach, where priorities need to be assigned to vehicles. The algorithm we present sets these priorities automatically by evaluating the vehicles’ time to react to stop before entering the intersection. We demonstrate our method in simulations of multiple vehicles and continuous traffic. It produces near-optimal velocity profiles and reduces the computation time in comparison to centralized MPC while avoiding vehicle collisions and deadlocks.

A distributed model predictive controller (MPC) shows its higher efficacy than a centralized MPC scheme, especially when the number of controlled agents increases. In the smart grid, to realize load regulation using the demand side management idea, we present a distributed MPC scheme for controlling the aggregated power output of thermostatically controller appliances (TCAs) to provide this service. Minimum ON/OFF time constraints, which are converted from logic conditions into inequalities, are modelled inherently in the optimization problem. A simulation using realistic data reveals the feasibility and efficacy of the proposed distributed MPC scheme.