DMFF-Net: a multi-scale feature fusion network based on DeepLabV3 for skin lesion segmentation

The fully convolutional networks (FCNs) have been widely applied in numerous medical image segmentation tasks. However, tissue regions usually have large variations of shape and scale, so the ability of neural networks to learn multi-scale features is important to the segmentation performance. In this paper, we improve the network for multi-scale feature fusion, in the medical image segmentation by introducing two feature fusion modules: i) global attention multi-scale feature fusion module (GMF); ii) local dense multi-scale feature fusion module (LMF). GMF aims to use global context information to guide the recalibration of low-level features from both spatial and channel aspects, so as to enhance the utilization of effective multi-scale features and suppress the noise of low-level features. LMF adopts bottom-up top-down structure to capture context information, to generate semantic features, and to fuse feature information at different scales. LMF can integrate local dense multi-scale context features layer by layer in the network, thus improving the ability of network to encode interdependent relationships among boundary pixels. Based on the above two modules, we propose a novel medical image segmentation framework (GLF-Net). We evaluated the proposed network and modules on challenging brain tumor segmentation and pancreas segmentation datasets, and very competitive performance has been achieved.

Skin cancer is the irregular growth of skin cells, which is most often termed as cancer, developed by exposure of ultraviolet rays from sun. In this research paper, deep learning enabled hybrid optimization is followed for skin cancer detection and lesion segmentation. Two optimization algorithms are followed for skin lesion segmentation and cancer detection. Here, pre-processing is done by anisotropic diffusion followed by skin lesion segmentation. Here, Multi-Scale Residual Fusion Network (MSRFNet) is utilized for skin lesion segmentation, which is trained by proposed Average Subtraction Student Psychology Based Optimization (ASSPBO). After skin lesion segmentation, necessary features are extracted, followed by skin cancer detection. Skin cancer is detected by Deep Residual Network (DRN) trained by proposed Fractional ASSPBO (FrASSPBO). Moreover, performance of proposed FrASSPBO-DRN is analysed by three performance metrics like testing accuracy, True Positive Rate (TPR), and False Positive Rate (FPR) with values of 93.4%, 94%, and 8.2%.

the early detection and successful treatment of skin cancers, a potent form of cancer, calls for the use of sophisticated diagnostic instruments. This study delves into the use of support vector machines (SVMs), to cope with the inconsistencies occurring among skin lesions, by merging them with feature fusion techniques. SVMs are preferred for this situation, as they are highly effective when it comes to the management of exceedingly dimensional data. Initially, in order to train and enhance the diagnostic capacity of the SVM classifier, a single and all-inclusive single dataset was generated through the analysis, identification and extraction of a wide variety of explanatory features (including colour, texture and shape) from a dataset comprising 10000 dermatoscope skin lesion representations. This was followed by the use of early and late fusion approaches, to generate an extensive dataset of descriptions, for assessing the reliability of the SVM classifier. Finally, the accuracy, precision and recall of the SVM classifier were ascertained by way of an objective dataset, comprising 25 dermatoscope representations of malignant and benign lesions. The accuracy, precision and recall of the SVM classifier are supported by its capacity to distinguish 10 true positives, 12 true negatives, three false positives and zero false negatives. As such, the SVM classifier can be considered effective, for the early detection of skin cancers. The results from this investigation verify that the capacity of SVMs, in terms of skin cancer diagnosis, is greatly improved with the utilization of feature fusion techniques. Also verified through this undertaking, is the effectiveness of innovative computational procedures, for the delivery of dependable medical diagnoses.

A multi-scale semantic feature fusion method for remote sensing crop classification

Skin cancer is the most predominat cancer in the world. Detection of skin cancer in earrly stages helps to decrease the fatality rate. Image processing and AI plays vital role in early detection of skin cancer. Dermoscopy images are used by doctors to detect skin cancer.In this paper, shape based features such as eccentricity, perimeter, convex area, orientation,area, ratio of major axis to minor acis length, eqvidiameter have been extracted from segmented skin lesion lesions. Subsequntly these features are give different classifiers such as SVM,KNN,ensemble learning. The efficacy of the proposed method was evaluated on 200 segmented skin lesions of common nevus, atypical nevus and melanoma with different class combinations. The proposed method achieved accuracy of 90% accuracy (acc) and 93% sensitivity (sen) for classifying segmented skin lesions into commatypical nevi and malignant melanoma. This approach helps dermatologists in screening skin lesions very fast and accurate.

MC-DC: An MLP-CNN Based Dual-path Complementary Network for Medical Image Segmentation

AFC-Unet: Attention-fused full-scale CNN-transformer unet for medical image segmentation

PMJAF-Net: Pyramidal multi-scale joint attention and adaptive fusion network for explainable skin lesion segmentation

Aiming at the problems of leakage, misdetection and low detection efficiency of transmission line foreign object detection in railroad environment, we propose an improved railroad transmission line foreign object detection algorithm MRS-YOLO based on YOLOv11n. Firstly, a multi-scale Adaptive Kernel Depth Feature Fusion (MAKDF) module is proposed and fused with the C3k2 module to form C3k2_MAKDF, which enhances the model's feature extraction capability for foreign objects of different sizes and shapes. Secondly, a novel Re-calibration Feature Fusion Pyramid Network(RCFPN) is designed as a Neck structure to improve the feature fusion capability of the model. Then, Spatial and Channel Reconstruction Detect Head (SC_Detect) based on spatial and channel preprocessing is designed to improve the overall detection accuracy of the model. Finally, the channel pruning technique is used to reduce the redundancy of the improved model, drastically reduce Parameters and GFLOPs, and improve the detection efficiency. The experimental results show that the mAP50 and mAP50:95 of the MRS-YOLO algorithm proposed in this paper are improved to 94.8% and 86.4%, respectively, which are 0.7 and 2.3 percentage points higher compared to the baseline, while Parameters and GFLOPs are reduced by 44.2% and 17.5%, respectively. It is demonstrated that the improved algorithm can be better applied to the task of foreign object detection in railroad transmission lines.

Bacterial wound infection poses a major challenge in trauma care and can lead to severe complications such as sepsis and organ failure. Therefore, rapid and accurate identification of the pathogen, along with targeted intervention, is of vital importance for improving treatment outcomes and reducing risks. However, current detection methods are still constrained by procedural complexity and long processing times. In this study, a hyperspectral imaging (HSI) acquisition system for bacterial analysis and a multi-scale dual-domain feature fusion transformer (MDF2Former) were developed for classifying wound bacteria. MDF2Former integrates three modules: a multi-scale feature enhancement and fusion module that generates tokens with multi-scale discriminative representations, a spatial-spectral dual-branch attention module that strengthens joint feature modeling, and a frequency and spatial-spectral domain encoding module that captures global and local interactions among tokens through a hierarchical stacking structure, thereby enabling more efficient feature learning. Extensive experiments on our self-constructed HSI dataset of typical wound bacteria demonstrate that MDF2Former achieved outstanding performance across five metrics: Accuracy (91.94%), Precision (92.26%), Recall (91.94%), F1-score (92.01%), and Kappa coefficient (90.73%), surpassing all comparative models. These results have verified the effectiveness of combining HSI with deep learning for bacterial identification, and have highlighted its potential in assisting in the identification of bacterial species and making personalized treatment decisions for wound infections.

To address the problem of inaccurate representation, inadequate fusion and unsmooth results in video-based single person three-dimensional human pose estimation, a multi-scale spatial-temporal feature fusion method is proposed. Firstly, the joint, limb and upper/lower body tokens were defined in spatial domain to represent the spatial multi-scale features of human body using positional embeddings. Secondly, the spatial multi-scale feature fusion module was constructed based on self-attention mechanism and multilayer perceptron to fuse joint, limb and upper/lower body features, obtaining initial pose feature sequence. Lastly, the temporal multi-scale encoding was established for temporal feature fusion to acquire final pose feature sequence, and optimize the generation of refined three-dimensional human pose through temporal decoding. Experimental results on Human3.6M dataset show that the mean per joint position error and joint velocity errors are 33.6 and 2.4 respectively, which reduce by 2.3% and 4.0%. The proposed method can improve three-dimensional human pose estimation accuracy and generate precise and smooth results while reducing computational cost. Furthermore, experimental results on HumanEva-I dataset show that the proposed method also has a certain degree of generalization ability.

Image dehazing is critical for visual enhancement and a wide range of computer vision applications. Despite significant advancements, challenges remain in preserving fine details and adapting to diverse, non-uniformly degraded scenes. To address these issues, we propose a novel image dehazing method that introduces a contrastive learning framework, enhanced by the InfoNCE loss, to improve model robustness. In this framework, hazy images are treated as negative samples and their clear counterparts as positive samples. By optimizing the InfoNCE loss, the model is trained to maximize the similarity between positive pairs and minimize that between negative pairs, thereby improving its ability to distinguish haze artifacts from intrinsic scene features and better preserving the structural integrity of images. In addition to contrastive learning, our method integrates a multi-scale dynamic feature fusion with a hybrid attention mechanism. Specifically, we introduce dynamically adjustable frequency band filters and refine the hybrid attention module to more effectively capture fine-grained, cross-scale image details. Extensive experiments on the RESIDE-6K and RS-Haze datasets demonstrate that our approach outperforms most existing methods, offering a promising solution for practical image dehazing applications.

Segmentation of skin lesion images facilitates the early diagnosis of melanoma. However, this remains a challenging task due to the diversity of target scales, irregular segmentation shapes, low contrast, and blurred boundaries of dermatological graphics. This paper proposes a multi-scale feature fusion network (MSF-Net) based on comprehensive attention convolutional neural network (CA-Net). We introduce the spatial attention mechanism in the convolution block through the residual connection to focus on the key regions. Meanwhile, Multi-scale Dilated Convolution Modules (MDC) and Multi-scale Feature Fusion Modules (MFF) are introduced to extract context information across scales and adaptively adjust the receptive field size of the feature map. We conducted many experiments on the public data set ISIC2018 to verify the validity of MSF-Net. The ablation experiment demonstrated the effectiveness of our three modules. The comparison experiment with the existing advanced network confirms that MSF-Net can achieve better segmentation under fewer parameters.

SEACU-Net: Attentive ConvLSTM U-Net with squeeze-and-excitation layer for skin lesion segmentation

Organic electrochemical transistors (OECTs) show abundant potential in biosensors, artificial neuromorphic systems, brain-machine interfaces, etc With the fast development of novel functional materials and new device structures, OECTs with high transconductance (gm > mS) and good cycling stabilities (> 10,000 cycles) have been developed. While stability characterization is always time-consuming, to accelerate the development and commercialization of OECTs, tools for stability prediction are urgently needed. In this paper, OECTs with good cycling stabilities are realized by minimizing the gate voltage amplitude during cycling, while a remaining useful life (RUL) prediction framework for OECTs is proposed. Specifically, OECTs based on p(g2T-T) show tremendously enhanced stability which exhibits only 46.1% on-current (ION) and 33.2% peak gm decreases after 80,000 cycles (53 min). Then, RUL prediction is proposed based on the run-to-failure (RtF) aging tests (cycling stability test of OECTs). By selecting two aging parameters (ION and peak gm) as health indicators (HI), a novel multi-scale feature fusion (MFF) method for RUL prediction is proposed, which consists of a long short-term memory (LSTM) neural network based multi-scale feature generator (MFG) module for feature extraction and an attention-based feature fusion (AFF) module for feature fusion. Consequently, richer effective information is utilized to improve the prediction performance, where the experimental results show the superiority of the proposed framework on multiple OECTs in RUL prediction tasks. Therefore, by introducing such a powerful framework for the evaluation of the lifetime of OECTs, further optimization of materials, devices, and integrated systems relevant to OECTs will be stimulated. Moreover, this tool can also be extended to other relevant bioelectronics.