- Conference Article
15
- 10.2514/6.2002-252
Optical microsensors for fluid flow diagnostics
- Jan 14, 2002
- D Wilson + 3 more +3
Optical microsensors for fluid flow diagnostics
Diffractive optical elements can be realized as ultra-thin plates that offer significantly reduced footprint and weight compared to refractive elements. However, such elements introduce severe chromatic aberrations and are not variable, unless used in combination with other elements in a larger, reconfigurable optical system. We introduce numerically optimized encoded phase masks in which different optical parameters such as focus or zoom can be accessed through changes in the mechanical alignment of a ultra-thin stack of two or more masks. Our encoded diffractive designs are combined with a new computational approach for self-calibrating imaging (blind deconvolution) that can restore high-quality images several orders of magnitude faster than the state of the art without pre-calibration of the optical system. This co-design of optics and computation enables tunable, full-spectrum imaging using thin diffractive optics.
Loading PDF
Optical microsensors for fluid flow diagnostics
Optical microsensors for fluid flow diagnostics
Replication of diffractive optics
In recent years surface-relief Diffractive Optical Elements (DOEs), a specialized class of diffractive optical elements, have revolutionized design of optical systems and instruments. Surface-relief diffractive optical components improve performance of the existing optical systems and increase systems compactness and reliability. Surface-relief DOEs can be fabricated as multilevel binary optical elements, or as continuous surface-relief optical elements. A surface-relief DOE is being designed such that incident light interacts with the topography of the surface-relief microstructure including the size and shape characteristics of surface profile features such as indentations and projections as well as their dimensional relationship, to perform a desired optical function. Binary optical elements are being made by the same microlithographic and ion etching techniques used to produce VLSI circuits. Computer-generated continuous surface-relief DOE is recorded by direct laser-beam or e-beam writing in photoresist. Continuous surface-relief DOE can be also recorded in photoresist by interferometric (holographic) technique. After development recorded in photoresist surface-relief microstructures are being ion-beam etched into quartz or other inorganic optical substrates.
Read moreA high volume precision compression molding process of glass diffractive optics by use of a micromachined fused silica wafer mold and low Tg optical glass
Recent advances in compression molding of glass optical elements for mass production offer the potential of extending this technology to elements with micro and nano scale features. In this research, glass diffractive optical elements (DOEs) with lateral features in the order of 10 µm and vertical height of 330 nm were fabricated using a fused silica glass mold and a special low Tg (glass transition temperature) glass material K-PG325. Molded DOEs were studied using an atomic force microscope (AFM) and scanning electron microscope (SEM) to evaluate the glass molding process capability. Optical testing of the molded DOEs was a further demonstration of the effectiveness of the molding process for high volume micro and diffractive optical component fabrication. The combination of two high-precision, high-volume processes, i.e., semiconductor batch process for optical mold making and glass molding for DOE replication, is an effective alternative manufacturing method for high-quality, low-cost optical components. The reported experiment is a detailed illustration of the glass molding process capability. With further process optimization a robust manufacturing process can be developed for mass production of diffractive and micro glass optical elements.
Read moreReconfigurable Multistate Optical Systems Enabledby VO2 Phase Transitions
Reconfigurableoptical systems are the object of continuing, intensiveresearch activities, as they hold great promise for realizing a newgeneration of compact, miniaturized, and flexible optical devices.However, current reconfigurable systems often tune only a single statevariable triggered by an external stimulus, thus, leaving out manypotential applications. Here we demonstrate a reconfigurable multistateoptical system enabled by phase transitions in vanadium dioxide (VO2). By controlling the phase-transition characteristics ofVO2 with simultaneous stimuli, the responses of the opticalsystem can be reconfigured among multiple states. In particular, weshow a quadruple-state dynamic plasmonic display that responds toboth temperature tuning and hydrogen-doping. Furthermore, we introducean electron-doping scheme to locally control the phase-transitionbehavior of VO2, enabling an optical encryption deviceencoded by multiple keys. Our work points the way toward advancedmultistate reconfigurable optical systems, which substantially outperformcurrent optical devices in both breadth of capabilities and functionalities.
Read moreThe formation of light templates for large-sized objects using the diffraction optics methods
The method of light template formation for large-sized objects (from several to tens of meters) such as antennas has been developed on the basis of diffraction optical elements (DOE). The essence of this method consists in creation into a space of light markers in the form of focused laser beams, the foci of which and intersection points lie on the paraboloid surface describing the shape of the antenna. This approach provides markers assignment with high accuracy (error is 0.02-0.2 mm at a distance of 20-30 m). The calculation of the basic DOE parameters for antenna with the diameter of 25 m is given. Experimental results on light templates formation using two DOE sets generating 19 and 288 light points are presented. It has been shown that under specified choice of optical system parameters for forming the light templates one can visually detect the deviation of the object surface by the value of ± 1 mm. The proposed method can greatly facilitate the implementation of labor-intensive assembly operations, adjustment as well as inspection the shape of large-sized antennas in shop conditions.
Read moreDiffractive Optic Synthesis and Analysis of Light Fields and Recent Applications
The synthesis and analysis of light fields having specific properties are the main issues in diffractive optics. Light field synthesis technology with diffractive optical elements can provide actual solutions for various applications that require extraordinary optical functions. Also, the rigorous analysis of a light field is an essential element for the design and application of micro- or nanoscale diffractive optical elements. In this paper we review the theoretical aspects of the diffractive optic synthesis and analysis of light fields, and present some recent applications of diffractive optical elements for information, nano-, and biotechnologies.
Read moreDiffractive optics: from basic research to practical applications
A diffractive optical element is an optical device that utilizes interference and diffraction rather than refraction or reflection, to shape an emerging wavefront. In this talk we will concentrate on the image-forming capabilities of diffractive optics.
Read moreA perspective on the artificial intelligence’s transformative role in advancing diffractive optics
Artificial intelligence (AI) is transforming diffractive optics development through its advanced capabilities in design optimization, pattern generation, fabrication enhancement, performance forecasting, and customization. Utilizing AI algorithms like machine learning, generative models, and transformers, researchers can analyze extensive datasets to refine the design of diffractive optical elements (DOEs) tailored to specific applications and performance requirements. AI-driven pattern generation methods enable the creation of intricate and efficient optical structures that manipulate light with exceptional precision. Furthermore, AI optimizes manufacturing processes by fine-tuning fabrication parameters, resulting in higher quality and productivity. AI models also simulate diffractive optics behavior, accelerating design iterations and facilitating rapid prototyping. This integration of AI into diffractive optics holds tremendous potential to revolutionize optical technology applications across diverse sectors, spanning from imaging and sensing to telecommunications and beyond.
Read moreVariable shaped electron-beam lithography application to subwavelength and computer generated diffractive optics fabrication
Electron-beam lithography for generation of diffractive optical elements topology is examined. The formula for the estimation of exposure data volume for variable shaped electron-beam lithography is presented as a function of diffractive optical element parameters and approximation accuracy. Diffractive optical elements with a subwavelength feature size were manufactured. These elements act as optical elements with an artificial refractive index. A Fresnel zone plate with an artificial phase retardation has been manufactured. Based on the proximity function measured for the actual exposure conditions, the proximity correction has been provided and undistorted structures have been fabricated. Experimental results are presented on computer generated optical elements for industrial applications. A computer generated lens which focuses radiation into a ring has been fabricated. A photomask set was manufactured for a reflecting optical element which focuses a high power CO2 laser beam to two points with parameters required for laser welding.
Read moreHybrid diffractive optics design via hardware-in-the-loop methodology for achromatic extended-depth-of-field imaging.
End-to-end optimization of diffractive optical elements (DOEs) profile through a digital differentiable model combined with computational imaging have gained an increasing attention in emerging applications due to the compactness of resultant physical setups. Despite recent works have shown the potential of this methodology to design optics, its performance in physical setups is still limited and affected by manufacturing artefacts of DOE, mismatch between simulated and resultant experimental point spread functions, and calibration errors. Additionally, the computational burden of the digital differentiable model to effectively design the DOE is increasing, thus limiting the size of the DOE that can be designed. To overcome the above mentioned limitations, a co-design of hybrid optics and image reconstruction algorithm is produced following the end-to-end hardware-in-the-loop strategy, using for optimization a convolutional neural network equipped with quantitative and qualitative loss functions. The optics of the imaging system consists on the phase-only spatial light modulator (SLM) as DOE and refractive lens. SLM phase-pattern is optimized by applying the Hardware-in-the-loop technique, which helps to eliminate the mismatch between numerical modelling and physical reality of image formation as light propagation is not numerically modelled but is physically done. Comparison with compound multi-lens optics of a last generation smartphone and a mirrorless commercial cameras show that the proposed system is advanced in all-in-focus sharp imaging for a depth range 0.4-1.9 m.
Read moreIncoherent diffractive optical elements for extendable field-of-view imaging
We present a diffractive optics design for incoherent imaging with an extendable field-of-view. In our design method, multiple layers of diffractive optical elements (DOEs) are synthesized so that images on the input plane illuminated with spatially incoherent light are reproduced upright on the output plane. Once this DOE cascade is calculated, the field-of-view can be extended by using an array of such DOEs without further calculation. We derive the optical condition to calculate the DOEs and numerically demonstrate the proposed method with the condition.
Read moreAccelerating diffractive optics design with GPU-based parallel technique
In this paper GPU based data parallel technique is used to reduce calculating time in diffractive optics elements (DOE) design. By using compute unified device architecture (CUDA) framework, comparison of acceleration radio of some major methods using in DOE design, including Gerchberg Saxton algorithm for global optimization in conjunction with Rayleigh-Sommerfeld diffractive integrating transformation, genetic algorithm with a finite-difference time-domain method and simulated annealing algorithm, is made with demonstrational DOE-lens design, whose focal spot size is 0.5 μm, incident light wavelength is 650 nm, focal length is 3mm, DOE aperture size is 2mm.
Read moreNovel approach for manufacturing of continuously shaped diffractive optical elements
Optical lithography with its 193nm technology is pushed to reach and shift its limits even further. There is strong demand on innovations in illumination part of exposure tools. Current illumination systems consisting of diffractive and refractive optical elements offer numerous benefits such as optimized laser beam shape with high homogeneity and high numerical aperture enabling high efficiency. LIMO's unique production technology is capable to manufacture free form surfaces on monolithic arrays larger than 250mm with high precision and reproducibility. Different kinds of intensity distributions with best uniformities or customized profiles have been achieved by using LIMO's refractive optical elements. Recently LIMO pushed the limits of this lens production technology and was able to manufacture first diffractive optical elements (DOE) based on continuous relief's profile. Beside for the illumination devices in lithography, DOEs find wide use in optical devices for other technological applications, such as optical communications and data processing. Up to now DOE designs follow the principle of phase diffraction gratings. Its diffraction structure with a periodic phase profile performs a superposition of beams with predefined energy ratios. Due to the application for high precise laser-beam shaping and beam splitting in optical technologies and optical fiber networks, number of grating orders is increased up to some tens or even hundreds. Classic lithographic technologies lead to quantized (step-like) profiles of diffractive micro-reliefs, which causes a decrease of beam splitter's diffractive efficiency. The newest development of LIMO's microlens fabrication technology allows us to make a step from free programmable microlens profiles to diffractive optical elements with high efficiency. Our first results of this approach are demonstrated in this paper. Diffractive beam splitters are presented. A special mathematical method is used to design diffractive optical elements with continuous surface profiles. Comparison between theoretical simulations and experimental results shows very good correlation.
Read morePhase and intensity control through diffractive optical elements in X-ray microscopy
Phase and intensity control through diffractive optical elements in X-ray microscopy
<title>Design and replication of diffractive optics for smart pixel applications</title>
High quality diffractive optical interconnect elements (DOlEs) were designed andfabricatedfor integration into asmart pixel, high performance optoelectronic computing (HPOC) module system. A cost effective DOlE replication methodwas developed in which thefinefeatures ofa candidate set ofDOIEs were successfully reproduced. Accurate multiple phaselevels were replicated utilizing an injection molding technique. This process was developed using two different types ofmaterials: a copolymer and an acrylic. One hundred units were successfully reproduced (50 units of the copolymer and 50units of the acrylic) from a single master DOlE that contained 2 pm x 2 pm pixels with up to 64 phase levels per pixel.Keywords: diffractive optical interconnect elements (DOlEs), replication, smart pixel HPOC module system Introduction Figure 1 shows the global free space optical interconnect architec-ture and primary components of the smart pixel HPOC module. DOlEs arecomputer generated transmission holograms that represent the computer read-only-memory (ROM) of each HPOC module. The HPOC module performs amathx-tensor Boolean multiplication using global (N4) interconnects whereeach VCSEL in an N x N dimension can be connected with up to IP detectors.Light from one VCSEL is incident on each DOlE, which routes the light to aset of detectors determined by the interconnect pattern stored in the DOlE.Diffractive optical elements offer several advantages over conventional re-fractive optics: 1) they are typically smaller and lighter in weight; 2) the func-tionality of several refractive lenses can be combined into one compounddiffractive element, thereby reducing system complexity; and 3) chromaticaberration can becorrected over a wide color spectrum by combining diffractiveand refractive lenses. Diffractive optics can effectively reduce the number ofelements and significantly improve the system level performance. However,due to the high cost in design and fabrication ofthese devices, a cost effectivereplication methodology is highly desirable. Replication of high quality, diffractive optics which include DOlE arrays, colli-mator lenslets, and Fourier lenslets are required in a vast array of applications. The fine feature sizes have been successfullyreplicated from a candidate set of DOlEs. Accurate multiple phase levels were reproduced utilizing an injection moldingprocess. Replicated lens systems included VCSEL collimator arrays, complex free space interconnect patterns, and imaginglenses along with compound phase multi-function lenses.
Read more