Energy Efficient Cloud Computing

The European Steel sector is committed to investigate solutions for reducing its environmental impact in terms of atmospheric and water emissions, energy consumption and solid waste production. To this aim, the project entitled Environmental Impact Evaluation and Effective Management of Resources in the EAF Steelmaking (EIRES), that is funded by the Research Fund for Coal and Steel, aims at providing electric steelworks with a tool for a systematic evaluation and investigation of solutions improving the process sustainability. As complex process modifications, before being practically implemented and tested on the field, need a thorough evaluation, a simulation model of the whole electric steelmaking route was developed as a part of EIRES tool. The paper presents such simulation model, which has been developed through Aspen Plus® V 8.6 in order to assess the impact of each operation unit, including both production processes and fumes and wastewater treatment plants. A case study is presented, which compares the environmental and energy impact related to the production of some of the most commonly produced steel grades. Correlations between the steel grade and the consumed electric energy or the slag amount and composition were highlighted, that can be a useful starting point for further assessment of potential margins of improvement of electric steelwork sustainability.

As there is a huge requirement for IT resources in business world, cloud computing is used by various businesses to satisfy their requirements. Many businesses outsource their IT needs to cloud and get benefited from cloud services. Cloud represents datacenter which has full infrastructure that provides virtualized services. The main challenge in cloud datacenter is energy consumption by server and computer and cooling equipment in cloud datacenter. Cloud datacenter emits huge amount of carbon dioxide which affect the environment acts against green atmosphere. This paper attempts to reduce the energy consumption of computing resources in cloud datacenter. Architecture has different entities which are described in the concerned sections. The proposed architecture saves energy by clustering similar request from the clients and also switches off ideal resource in cloud datacenter. The proposed architecture is an efficient energy consumption resource management model for cloud datacenter.

Cloud computing is a new computation technology that provides services to consumers and businesses. The main idea of Cloud computing is to present software and hardware services through the Internet to the users and organizations at all levels. In Cloud computing, the users pay for the services, which means a usage-based payment system is used in this technology. Using virtualization technology in computation resources enables the appropriate utilization of resources in cloud computing. One of the most significant challenging issues in virtualization technology is the placement of optimal virtual machines on physical machines in cloud data centers. The placement of virtual machines comprises a process wherein virtual machines are mapped onto physical machines in cloud data centers. Optimal deployment leads to the reduction in power consumption, optimal use of resources, traffic reduction in data centers, costs reduction, and efficiency enhancement of the data center in the cloud. The present article proposed a new approach using a combination of the Sine–Cosine Algorithm and Salp Swarm Algorithm as discrete multi-objective and chaotic functions for optimal virtual machine placement. The first goal of the proposed algorithm was to reduce the power consumption in cloud data centers by condensing the number of active physical machines. The second goal was to reduce the waste of resources and manage it by optimally virtual machine placement on physical machines in cloud data centers. The third objective was to minimize and reduce Service Level Agreement among the active physical machines in cloud data centers. The proposed method prevent the increase in the migration of virtual machines onto physical machines. Ultimately, the results obtained from the proposed algorithm were compared with those of previous akin algorithms in the literature, including First Fit, Virtual Machine Placement Ant Colony System, and Modified Best Fit Decreasing. The proposed scheme is tested using Amazon EC2 Instances and the result indicated that the proposed algorithm performs better than the existing algorithms for various performance metrics.

Strict Timed Causal Consistency as a Hybrid Consistency Model in the Cloud Environment

Design for excellence

Per-user pricing is possible with cloud computing, a relatively new technology. It provides remote testing and commissioning services through the web, and it utilizes virtualization to make available computing resources. In order to host and store firm data, cloud computing relies on data centers. Data centers are made up of networked computers, cables, power supplies, and other components. Cloud data centers have always had to prioritise high performance over energy efficiency. The biggest obstacle is finding a happy medium between system performance and energy consumption, namely, lowering energy use without compromising system performance or service quality. These results were obtained using the PlanetLab dataset. In order to implement the strategy we recommend, it is crucial to get a complete picture of how energy is being consumed in the cloud. Using proper optimization criteria and guided by energy consumption models, this article offers the Capsule Significance Level of Energy Consumption (CSLEC) pattern, which demonstrates how to conserve more energy in cloud data centers. Capsule optimization's prediction phase F1-score of 96.7 percent and 97 percent data accuracy allow for more precise projections of future value.

The economy of Kazakhstan is the first economy in Central Asia and the second among Eurasian Economic Union (EAEU) countries after Russia. On rates of hydrocarbon raw materials extraction Kazakhstan is included into first ten countries of the world. Kazakhstani economy is based on heavy industry, ferrous and non-ferrous metals, and oil and gas. And it allows Kazakhstan is being on the road of economic growth. With economic growth, the energy production and consumption are also increasing rapidly, resulting first of all, on harmful carbon emissions. Thus, the purpose of this research is to carry out a comparative assessment in the energy sector development and to submit forecast of its demand and its environmental impact in terms of Kazakhstani economic growth up to 2040. First scenario (Base Case) assumes conventional development pattern together with neither significant changes in the patterns of energy supply and demand nor extensively changed policies and measures. The second one (Mitigation) assumes a technological improvement, regulation and industrial development policies and additional policies which have been designed to promote energy efficiency and reduce emissions across the economy. The simulations are applied until the year 2040, while 2015 is set as the base year. The findings suggest in both scenarios Kazakhstan will continue to pursue its economic development driving energy demand and carbon emissions will also raise. However, under Mitigation Scenario, emission intensity will be lower insignificantly.

Smart mobile devices (SMDs) are integral for running advanced applications that demand significant computing resources and quick response time, e.g., immersive gaming and advanced image editing. However, SMDs often face constraints in computational capacity and battery duration, restricting their ability to process these tasks instantaneously. Cloud computing can circumvent these limitations by computation offloading, but cloud data centers (CDCs) are often deployed at long distances from users, which results in longer computational latency. To address the latency issue, the incorporation of small base stations (SBSs) in the vicinity of the user provides services with high bandwidth and low latency. The primary challenge lies in balancing the economics of the system consisting of different SMDs, SBSs, and a CDC, i.e., minimizing cost while still meeting the latency requirements of applications. In this work, a cost-minimized computation offloading framework is formulated and solved by a two-stage optimization algorithm named Lévy flight and Simulated Annealing-based Grey wolf optimizer (LSAG). The optimal edge selection strategy is defined in the first stage for dealing with the case of several available SBSs. The second stage coordinates task scheduling and optimizes the allocation of resources among SMDs, SBSs, and CDC. LSAG integrates the extended search property of Lévy flight and the individual selection strategy of simulated annealing in the grey wolf optimizer, which reduces the risk of falling into local optima and finds the global optimum. Experimental results of executing real-life tasks show that LSAG outperforms its state-of-the-art peers in terms of cost and speed of convergence.

With ever increasing usage of IT infrastructure around the globe, the increase in energy consumption and carbon emission is a worrisome situation for everyone because of its direct effect on environment. The environment is being dangerously impacted by Information Technology infrastructure extensive use and its waste. Cloud computing has emerged as one step further solution to deploy all virtualized IT resources as per need on self-service basis as a rental method for the users. Different cloud deployment methods have emerged according to the need of users, institutions and communities. In last decade virtualization has been a milestone in enabling optimal usage of information technology resources. Cloud computing has provided a platform for deploying everything as a Service in IT, which has changed the economics of IT based business and organizations from Capital Expenditure to Operational Expenditure. For enabling Cloud services we first need to understand our existing infrastructure. In second step we should be able to virtualize it for optimal usage. Then with the help of existing cloud applications we can deliver and deploy information technology as a resource at various levels such as infrastructure, platform, and software. Keywords; cloud computing, carbon emission, energy consumption, IT waste, virtualization. The Advancement in the field of information technology has enabled us to optimize the use of physical infrastructure with the help of virtualization, most of which is only used in specific applications like vitalizing a local area network on switch or vitalizing a compute resource to run more than one operating system on a desktop. The benefits of same has not been completely implemented and utilized in industrial environments where we require a large amount of IT resources. The advantage of using cloud is to enable complete utilization of Information technology resources, where most of the resources are underutilized. The cost involved in maintenance and management of those resources is huge which can be saved due to centralized management of private cloud infrastructure. We create private cloud keeping in mind. • Availability and performance requirements for the cloud • Infrastructure sizing, performance and continual availability requirements • The need for data security or isolation • The appropriate user interface With advent of IT as a service in cloud computing technology energy consumption and related carbon emissions and waste are considerably lesser than in-house implementation. Technology in Cloud Computing creates an able structure for sharing resources with the help of virtualization among many; it greatly decreases or abolishes the need for most products, equipment, utilities and facilities. The results are more sustainable IT infrastructures and processes which help in keeping environment safe. • Highest resource consumption and effectiveness • Reduced energy consumption by up to 95 % with the help of virtualization which optimizes the use of physical infrastructure and thereby helps IT to be delivered as a service. • Displaced utility costs Workstation utility costs are cut by 90% due to change of capital expenditure into operational expenditure in industries or organizations across the world. • Reduced electronic waste as No more batteries and minimal software/hardware waste. • Reduced waste overall due to consumption of computational power as service, no more as infrastructure. • Reduced ecological impact of workstations as compared to thin clients as anything related to computation can be provided as a service on a client connected with internet to the cloud provider.

Cloud computing is the combination of grid computing, distributed computing and utility computing. Cloud computing provides various types of services (servers and storage facility) in the on demand basis. The main goal of the cloud computing is to preserve and organize the very huge data center or data forms. The data forms are composed of thousands of servers that absorb the giant (ample) amount of electricity in the word of energy. The decreasing the energy consumption in datacenter is the major challenge in cloud computing now a day. This research article is going to address the problem of high energy consumption at datacenter. Concentrate on virtual machine scheduling in cloud datacenter with Dynamic Voltage Frequency Scaling (DVFS) approach. We have combined shortest job first and Round Robin algorithms with Vibrant Quantum. This combination of algorithm is considered as shortest round vibrant queue (SRVQ) algorithm. SRVQ reduces the waiting time of the scheduling process and minimize the starvation. The DVFS and SRVQ worked together and produced fruitful results in the final experiments. This work reduced the server’s energy consumption in the cloud data center. In the final results, our proposed framework exhibits 45% of energy efficiency compare to other previously proposed algorithms. 33% of QoS performance were enhanced by our framework.

Rice processing is the major food processing industry in Sri Lanka. Although the process creates immense economic, social and environmental impacts, the studies conducted to analyze those impacts are scarce in the country. Though there are various rice production processes in the world, basically there are two rice production processes as raw rice and parboiled rice in Sri Lanka. Out of these, parboiled rice processing is the most prominent one. But, it creates considerable burden on the environment. Parboiling process can be categorized into two, as conventional and modern based on the processing methods practice in the mills. This paper compares the environmental impact of that conventional and modern rice processing by using life cycle analysis as the assessment tool. The results reveal that the modern rice processing creates elevated environmental impact in terms of all considered impact categories. In addition, soaking, drying and de-husking are identified as the most causative unit operations to the total environmental impact.

Environmentally conscious construction has received a significant amount of research attention during the last decades. Even though construction literature is rich in studies that emphasize the importance of environmental impact during the construction phase, most of the previous studies failed to combine environmental analysis with other project performance criteria in construction. This is mainly because most of the studies have overlooked the multi-objective nature of construction projects. In order to achieve environmentally conscious construction, multi-objectives and their relationships need to be successfully analyzed in the complex construction environment. The complex construction system is composed of changing project conditions that have an impact on the relationship between time, cost and environmental impact (TCEI) of construction operations. Yet, this impact is still unknown by construction professionals. Studying this impact is vital to fulfill multiple project objectives and achieve environmentally conscious construction. This research proposes an analytical framework to analyze the impact of changing project conditions on the relationship of TCEI. This study includes green house gas (GHG) emissions as an environmental impact category. The methodology utilizes multi-agent systems, multi-objective optimization, analytical network process, and system dynamics tools to study the relationships of TCEI and support decision-making under the influence of project conditions. Life cycle assessment (LCA) is applied to the evaluation of environmental impact in terms of GHG. The mixed method approach allowed for the collection and analysis of qualitative and quantitative data. Structured interviews of professionals in the highway construction field were conducted to gain their perspectives in decision-making under the influence of certain project conditions, while the quantitative data were collected from the Florida Department of Transportation (FDOT) for highway resurfacing projects. The data collected were used to test the framework. The framework yielded statistically significant results in simulating project conditions and optimizing TCEI. The results showed that the change in project conditions had a significant impact on the TCEI optimal solutions. The correlation between TCEI suggested that they affected each other positively, but in different strengths. The findings of the study will assist contractors to visualize the impact of their decision on the relationship of TCEI.

[Purpose] Server virtualization technology is the basic form for the cloud data center to serve customers. While the cloud data center reduces the SLA violations in the early stage, the increase in the utilization of resources such as virtual machine servers and network equipment and decrease in energy consumption have become an important issue for reduction of operating costs. Therefore, on the background of the cloud data center network based on SDN technology, this paper studies a cloud data center resource utilization and energy consumption optimization strategy through virtual machine migration and integration. [Method] The technology based on SDN is firstly introduced, the approximate optimal solution FFD algorithm for the multidimensional vector bin packing problem is then presented, the Partheno-Genetic Algorithm (PGA) is then recommended, finally a Hybrid Partheno genetic Algorithm (HPGA) based on the both is established and a mathematic model is created. [Results] By combining the advantages of FFD and PGA, this paper improves the utilization of the resources of the entire cloud data center, reduces energy consumption, and prevents the occurrence of computing “hot spots”. [Conclusion] Experiments in CloudSim prove the effectiveness of the algorithm. Compared with FFD and PGA algorithms, it is able to enhance the efficiency of the Data Center effectively, and obtain the optimal solution more quickly, thereby balancing the physical resources of the server.

Cloud data centers (CDCs) have become increasingly popular and widespread in recent years with the growing popularity of cloud computing and high-performance computing. Due to the multi-step computation of data streams and heterogeneous task dependencies, task failure frequently occurs, resulting in poor user experience and additional energy consumption. To reduce task execution failure as well as energy consumption, we propose a novel AI-driven energy-aware proactive fault-tolerant scheduling scheme for CDCs in this paper. First, a prediction model based on the machine learning approach is trained to classify the arriving tasks into "failure-prone tasks" and "non-failure-prone tasks" according to the predicted failure rate. Then, two efficient scheduling mechanisms are proposed to allocate two types of tasks to the most appropriate hosts in a CDC. The vector reconstruction method is developed to construct super tasks from failure-prone tasks and separately schedule these super tasks and non-failure-prone tasks to the most suitable physical host. All the tasks are scheduled in an earliest-deadline-first manner. Our evaluation results show that the proposed scheme can intelligently predict task failure and achieves better fault tolerance and reduces total energy consumption better than the existing schemes.

Anthropic activities have a significant influence on the environment, from the extraction of raw materials to the environmental impact generated by the processes developed and products manufactured. For this reason, rigorous control of the exploitation of resources must be introduced and industrial processes optimized to achieve efficiency in using raw materials and energy consumption through evaluating environmental risks with a life cycle approach. This work aims to design an application that allows assessing the environmental risks generated by a productive activity. The advantages of this proposal are the reduction of costs based on the quantification of resources used and the comparative analysis of the results with reference limits cited in national and international regulations, which allow decision-making to minimize environmental impact. As a result of this research, a calculator was obtained, which is executed from a user interface allowing the calculation of the most significant environmental risks in terms of CO2 emissions, wastewater, and waste generation associated with production processes under regular conditions, warning conditions, and in emergency situations. Finally, to validate its operation, real data from an industry dedicated to the production of dairy products were applied, obtaining a risk analysis in terms of CO2 emissions and wastewater generation.KeywordsCalculator applicationsCO2 emissionsEnvironmental riskProduction processEnvironmental impact