Enhanced lie detection through EEG analysis using convolutional neural networks and genetic algorithm optimization

In response to the problems of traditional genetic algorithms in evaluating English compositions, the stability of automatic grading of English compositions has been further enhanced. This article evaluates the teaching effectiveness of automatic grading of English compositions using an optimization fusion algorithm combined with genetic optimization algorithm and CNN model. By analyzing genetic content and optimization algorithms, a corresponding fusion optimization model was obtained, and the automatic evaluation of English compositions was analyzed and predicted through experimental verification. The results indicate that the curves corresponding to different parameters exhibit typical segmentation features through the variation curves of individual numbers under different scale factors. And through quantitative description and analysis of the curve, it can be seen that the change in proportion factor has an absolute advantage in the impact of genetic algorithm on the number of children. As the number of samples increases, the performance of genetic optimization algorithms under the f function shows an upward trend. Research has shown that the writing content index has the greatest impact on English writing, while the corresponding grammar errors have the smallest impact on English writing. Finally, the accuracy of the optimized model was verified by comparing the model curve with experimental data. This study provides theoretical support for the use of genetic optimization algorithms and CNN models in English, and provides ideas for the use of optimization algorithms in other fields.

A genetic algorithm (GA), is used to optimize the many parameters of a convolutional neural network (CNN) that control the structure of the network. CNNs are used in image classification problems where it is necessary to generate feature descriptors to discern between image classes. Because of the deep representation of image data that CNNs are capable of generating, they are increasingly popular in research and industry applications. With the increasing number of use cases for CNNs, more and more time is being spent to come up with optimal CNN structures for different applications. Where one CNN might succeed at classification, another can fail. As a result, it is desirable to more easily find an optimal CNN structure to increase classification accuracy. In the proposed method, a GA is used to evolve the parameters that influence the structure of a CNN. The GA compares CNNs by training them on images of concrete containing cracks. The best CNN after several generations of the GA is then compared to the state-of-the-art CNN for crack detection. This work shows that it is possible to generalize the process of optimizing a CNN for image classification through the use of a GA.

paper, we focus on exploring the relationship between weave patterns and their mechanical properties in woven fiber composites through Machine Learning. Specifically, we explore the interactions between woven architectures and in-plane stiffness properties through Deep Convolutional Neural Network (DCNN) and Generative Adversarial Network (GAN). Our research is important for exploring how woven composite’s pattern is related to its mechanical properties and accelerating woven composite design as well as optimization. We focus on two tasks: (1) Stiffness prediction: Predicting in-plane stiffness properties for given weave patterns. Our DCNN extracts high-level features through several convolutional and fully connected layers to determine the final predictions. (2) Weave pattern prediction: Predicting weave patterns for target stiffness properties, which can be treated as the reverse task of the first one. Due to many-to-one mapping between weave patterns and the composite properties, we utilize a Decoder Neural Network as our baseline model and compare its performance with GAN and Genetic Algorithm. We represent the weave patterns as 2D checkerboard models and use finite element analysis (FEA) to determine in-plane stiffness properties, which serve as input data for our ML framework. We show that: (1) for stiffness prediction, DCNN can predict stiffness values for a given weave pattern with relatively high accuracy (above 93%); (2) for weave pattern prediction, the GAN model gives the best prediction accuracy (above 92%) while Decoder Neural Network has the best time efficiency. HAOTIAN FENG

Identification of crops is an important topic in the agricultural domain. Hyperspectral remote sensing data are very useful for crop feature extraction and classification. Remote sensing data is an unstructured data and Convolutional Neural Network (CNN) can work on unstructured data efficiently. This paper presents an evaluation of CNN for crop classification using the Indian Pines standard dataset obtained from the AVIRIS sensor and the study area dataset obtained from the EO-1hyperion sensor. Optimized CNN has been tuned by training the model on different parameters. It has been compared with two classification algorithms: Deep Neural Network (DNN) and Convolutional Autoencoder. According to the test results, the proposed optimized CNN model provided better results as compared to the other two methods. CNN has given 97 ± 0.58% overall accuracy for the Indian Pines standard dataset and 78 ± 2.43% for our study area dataset.

The use of genetic algorithm optimisation applied to solving engineering problems has gained popularity over the last 10 years. Applications to the design of water distribution systems based on genetic algorithm optimisation first appeared in the early 1990s. This paper starts out with a brief review of the past use of genetic algorithms applied to aspects of water distribution systems. Leak detection and calibration of pipe internal roughnesses in a network are important issues for water authorities around the world. Computer simulation of water distribution systems has become a routine task of water authorities and consultants. One of the big unknowns in developing these models is the condition of the pipes, especially if they are old. It is very difficult to obtain reliable estimates of the roughness height for each pipe in the system using steady state calibration techniques. Liggett and Chen at Cornell University in 1994 developed an innovative technique called the inverse transient technique. The technique is able to determine, from unsteady pressure traces at a number of nodes in the network, the locations and magnitudes of any leaks that are occurring and the friction factor for each pipe in the network. An alternative approach to solving the minimization problem is presented in this paper. Genetic algorithm optimisation is used. A population of solutions is generated with each string representing values of the decision variables that are to be found. These include the magnitudes of leaks at nodes in the network and friction factors for each pipe. A forward transient analysis is performed for each string in the population that represents different combinations of leak magnitudes and friction factors. The sum of the absolute deviations between the measured transient pressures and the pressures predicted by the numerical model are determined and are used to determine the fitness of the string. The smaller the sum of the deviations then the larger the fitness that is assigned to the string. The genetic algorithm operators that are used include tournament selection, crossover and mutation. A new crossover operator is introduced. The genetic algorithm optimisation technique that has been developed in the research is applied to an example network. The results are encouraging and compare favorably with the inverse transient technique.

The three-dimensional spatial structure of a methylene-acetal-linked thymine dimer present in a 10 basepair (bp) sense-antisense DNA duplex was studied with a genetic algorithm designed to interpret NOE distance restraints. Trial solutions were represented by torsion angles. This means that bond angles for the dimer trial structures are kept fixed during the genetic algorithm optimization. Bond angle values were extracted from a 10 bp sense-antisense duplex model that was subjected to energy minimization by means of a modified AMBER force field. A set of 63 proton-proton distance restraints defining the methylene-acetal-linked thymine dimer was available. The genetic algorithm minimizes the difference between distances in the trial structures and distance restraints. A large conformational search space could be covered in the genetic algorithm optimization by allowing a wide range of torsion angles. The genetic algorithm optimization in all cases led to one family of structures. This family of the methylene-acetal-linked thymine dimer in the duplex differs from the family that was suggested from distance geometry calculations. It is demonstrated that the bond angle geometry around the methylene-acetal linkage plays an important role in the optimization.

The study presents the results of the development and testing of deep learning neural network architectures, which demonstrate high accuracy rates in classifying neurophysiological data, in particular hemodynamic brain activation patterns obtained by functional near-infrared spectroscopy, during solving mathematical problems on spatial-numerical associations. The analyzed signal represents a multidimensional time series of oxyhemoglobin and deoxyhemoglobin dynamics. Taking the specificity of the fNIRS signal into account, a comparative analysis of 2 types of neural network architectures was carried out: (1) architectures based on recurrent neural networks: recurrent neural network with long short-term memory, recurrent neural network with long short-term memory with fully connected layers, bidirectional recurrent neural network with long short-term memory, convolutional recurrent neural network with long short-term memory; (2) architectures based on convolutional neural networks with 1D convolutions: convolutional neural network, fully convolutional neural network, residual neural network. Trained long short-term memory recurrent neural network architectures showed worse results in accuracy in comparison with 1D convolutional neural network architectures. Residual neural network (model_Resnet) demonstrated the highest accuracy rates in three experimental conditions more than 88% in detecting age-related differences in brain activation during spatial-numerical association tasks considering the individual characteristics of the respondents’ signal.

The density and structure of bone is highly heterogeneous, causing wide variations in the reported speed of sound for ultrasound propagation. Current research on the propagation of high intensity focused ultrasound through an intact human skull for non-invasive therapeutic action on brain tissue requires a detailed model for the acoustic velocity in cranial bone. Such models have been difficult to derive empirically due to the aforementioned heterogeneity of bone itself.We propose a single unified model for the speed of sound in cranial bone based upon the apparent density of bone by CT scan. This model is based upon the coupling of empirical measurement, theoretical acoustic simulation and genetic algorithm optimization. The phase distortion caused by the presence of skull in an acoustic path is empirically measured. The ability of a theoretical acoustic simulation coupled with a particular speed-of-sound model to predict this phase distortion is compared against the empirical data, thus providing the fitness function needed to perform genetic algorithm optimization. By performing genetic algorithm optimization over an initial population of candidate speed-of-sound models, an ultimate single unified model for the speed of sound in both the cortical and trabecular regions of cranial bone is produced.The final model produced by genetic algorithm optimization has a nonlinear dependency of speed of sound upon local bone density. This model is shown by statistical significance to be a suitable model of the speed of sound in bone. Furthermore, using a skull that was not part of the optimization process, this model is also tested against a published homogeneous speed-of-sound model and shown to return an improved prediction of transcranial ultrasound propagation.

The report presents an algorithm for constructing a convolutional hierarchical neural network classifier, which is a modification of the algorithm for constructing hierarchical neural network classifiers suggested before. The original algorithm was designed to exploit intrinsic class hierarchy to build a class tree with a neural network in each node classifying groups of initial classes (in a non-terminal node) or a subset of original classes (in a terminal node). The convolutional modification utilizes convolutional neural networks instead of regular fully connected networks in order to apply the model to image classification tasks. Use of class hierarchy for image classification should reduce the number of adjusted neural network parameters compared to deep convolutional neural networks, and therefore it should reduce training and inference time. In this context the algorithm may be compared with some pruning techniques. The convolutional hierarchical neural network classifier inherits some hyperparameters of a conventional hierarchical neural network classifier, like the activation threshold and the threshold by the share of voting patterns. The goal of this study was to explore different strategies of choosing these hyperparameters. To test these strategies, we used the CIFAR-10 dataset. Also, for demonstration purposes we apply the convolutional hierarchical neural network classifier to the CIFAR-100 dataset.

In this paper, alternative direction finding methods have been proposed using deep learning techniques. Firstly, Regeression and Classification models have created by using Convolutional Neural Networks (CNNs). In the second Convolutional Neural Networks and Recurrent Neural Networks (RNNs) have been utilized in the proposed methods. Despite having vast amount of direction finding studies, utilization of neural networks is scarce in literature and past works mostly only includes usage of CNNs. In this study, direction finding is performed by learning signals reaching multiple antenna arrays by networks. Created neural networks have been fed with different data formats and their performances against noisy and no-noise data have been shown. In addition, comparative analysis of the developed models were made in the similar Signal-to-Noise Ratio (SNR) range with the subspace based MUSIC algorithm, which is frequently used in direction finding.

Rotation speed and propulsive force are the two critical parameters in the work of the air-borne bolting rig. To address the problem that unreasonable rotation speed and propulsive force will induce the breakage of the drill pipe and the inability of the drill bit to cut coal adequately this paper proposes an adaptive control strategy for the air-borne bolting rig based on genetic algorithm optimization. Firstly, we obtain the corresponding coal hardness by the real-time acquisition of the working torque of the drill pipe. Then we calculate the reasonable rotation speed of the hydraulic motor and the propulsive force of the hydraulic cylinder on the coal of different hardness. Secondly, the genetic algorithm is applied to optimize the parameters of the PID (proportion integration differentiation) controller so that the system may attain the target value fast and reliably and achieve adaptive control. Finally, a simulation model of the slewing system and the propulsion system of the air-borne bolting rig are established in the AMESim hydraulic software, and the simulation tests were carried out under two distinct working conditions: single coal hardness and coal hardness of sudden change. The results indicate that the PID control strategy based on genetic algorithm optimization has a shorter response time, a smaller overshoot, and a lower steady-state error than the traditional PID control strategy.

In recent years, advances in image restoration have prominently featured Convolutional Neural Networks (CNNs) and Generative Adversarial Networks (GANs).Specifically, in seismic image denoising, the DnCNN model, rooted in CNN, employs residual learning combined with batch normalization for a streamlined approach to denoising.Alternatively, SRGAN, leveraging GAN and super-resolution techniques, trains its generative model using a perceptual loss function, accentuating perceptual disparities between generated and authentic images to boost visual quality.Recognizing the importance of preserving salient seismic data, the Constrained-DnCNN model has been introduced, refining seismic data interpretation.Additionally, the CR-SRGAN model, targeting super-resolution of artifacts and color restoration, deviates from conventional training datasets acquired via high-resolution image interpolation and downsampling.Upon comparative analysis, the DCGAN, amalgamating features of CNN and GAN, stands out for harnessing CNN's robust feature extraction.This bolsters the model's capacity to adeptly fit real data distributions.DCGAN's potential spans aspects like multimodal fusion, model interpretability, trustworthiness, and image restoration quality, marking it a promising research avenue.

Recent experience in applying recurrent neural networks (RNNs) to interpreting Permannt Downhole Gauge (PDG) records has highlighted the potential utility of machine learning algorithms to learn reservoir behavior from data. The power of the RNN resides in its ability to retain information in a form of memory of previous patterns and information contained in the previous behavior of phenomena being modeled. This memory plays a role of informing the decision at the present time by using what happened in the past. This property suggests RNNs as a suitable choice to model sequences of reservoir information, even when the reservoir modeler is faced with incomplete knowledge of the underlying physical system. Convolutional Neural Networks (CNNs) are another variant of machine learning algorithms that have shown promise in sequence modeling domains, such as audio synthesis and machine translation. In this study, RNN and CNN were applied to tasks that traditionally would be modeled by a reservoir simulator. This was achieved by formulating the relationship between physical quantities of interest from subsurface reservoirs as a sequence mapping problem. In addition, the performance of a CNN layer as compared to RNN was evaluated systematically to investigate their capabilities in a variety of tasks of interest to the reservoir engineer. Preliminary results suggest that CNNs, with specific design modifications, are as capable as RNNs in modeling sequences of information and as reliable when making inferences to cases that has not been seen by the algorithm during training. Design details and reasons pertaining to the way these two seemingly different architectures process information, and handle memory are also discussed.

Objects and processes classification is a common experimental problem. Its solution, first of all, is needed in automatic diagnosis systems, for example, to determine the equipment operation state through the diagnostic signal or to identify abnormalities with medical images. With the development of convolutional neural networks, new prospects for solving such problems have risen up. However, the classification accuracy that can be achieved on these networks is not sufficient enough for all diagnosis issues. It is subject to, for example, timely diagnosis of the onset of transient phenomena. At the same time, another type of neural network, Kohonen self-organizing maps, has a conceptual property for training on unclassified set of classes, that is, giving the opportunity to solve such an issue. Therefore, the accuracy enhancement of the classification on the basis of Kohonen networks implementation in the architecture of convolutional networks is a relevant objective and has practical significance. The article analyzes the means of improving the accuracy of convolutional neural networks and arising problems solution. The ways of increasing the proportion of correct clustering on Kohonen networks due to the ‘growth’ of its grid shape in determining new classes in the learning process are also given. It is this property that makes it possible to recognize transient phenomena. It is determined that the existing solutions of the combination of Kohonen networks and convolutional networks are aimed at improving the efficiency of only self-organizing maps, with the purpose to improve the accuracy of classification by convolutional networks, it became necessary to develop a new architecture. The paper provides a description of this issue. Since the initial information of the Kohonen networks is the weighting matrix values of the grid shape neurons, it was necessary to associate it with the representation of the images in order to process the diagnostic images. The paper proposes the concept of a built-in associative array block based on Kohonen networks. According to the proposed method, a software implementation of a hybrid neural network is developed. The formulation and results of computational experiments are presented. The efficiency of the proposed method is experimentally proved. Keywords: convolutional neural networks, CNN, Kohonen self-organizing maps, SOM, signal classification, image classification.

In marine engineering, polymer layers are anti-seepage barrier materials. The mechanical interaction between marine sand and polymer layer significantly affects overall structural stability. In this study, direct shear tests at different temperatures in the marine environment are simulated to evaluate the shear behavior of marine sand and polymer layer interface, and a database is developed. Based on the experimental data, the study employs the Back propagation Neural Network (BPNN), Genetic Algorithm and Particle Swarm Optimization BPNN, and convolutional neural network (CNN) models, which are trained and tested. The findings show that the CNN algorithm significantly outperforms other models in terms of prediction accuracy and efficiency. Sensitivity analysis shows that temperature, shear displacement, normal stress, and particle size have influence on interfacial shear strength, and the impact of normal stress is the greatest. In addition, an empirical formulation is proposed to provide tools for those without machine learning. Based on the research results, the deep learning CNN model developed in the study can accurately predict the shear strength of the interface between marine sand and the polymer layer, which provides an effective tool for the design and optimization of marine engineering.