Extended Exposure Fusion

Technique of high dynamic range imaging (HDRI) was introduced into conventional high dynamic range display (HDRD). Sharpness of image was further enhanced by improving local contrast ratio in the HDRI-based high dynamic range display.

Perceptual brightness-based inverse tone mapping for high dynamic range imaging

High dynamic range imaging techniques involve capturing and storing real world radiance values that span many orders of magnitude. However, common display devices can usually reproduce intensity ranges only up to two to three orders of magnitude. Therefore, in order to display a high dynamic range image on a low dynamic range screen, the dynamic range of the image needs to be compressed without losing details or introducing artefacts, and this process is called tone mapping. A good tone mapping operator must be able to produce a low dynamic range image that matches as much as possible the perception of the real world scene. We propose a two stage tone mapping approach, in which the first stage is a global method for range compression based on a gamma curve that equalizes the lightness histogram the best, and the second stage performs local contrast enhancement and color induction using neural activity models for the visual cortex. © (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.

Scenes in real world have dynamic range of radiation that cannot be captured by conventional cameras. High dynamic range imaging is a technique to capture detail images where, in the field of image, intensity variation is extreme. This technique is very useful for biological imaging where the samples have very bright and very dark regions and both parts have useful information. In this article we propose a novel high dynamic range imaging technique based on compressive imaging that uses one single detector instead of camera (array of detectors) to capture an image. Combination of high dynamic range imaging and compressive imaging benefits from imaging with high dynamic range of radiation and advantages of compressive sampling; namely, imaging at regions of optical spectrum where conventional cameras are not readily available and single detectors are available. Additionally, as its name suggests, this technique requires less number of samples (compared to raster scanning). Our experimental results show that high dynamic range compressive imaging system is capable of capturing images with large intensity contrast.

The luminous value is high for many natural scenes, which causes loss of information and occurs in dark images. The High Dynamic Range (HDR) technique captures the same objects or scene for multiple times in different exposure and produces the images with proper illumination. This technique is used in the various applications such as medical imaging and observing the skylight, etc. HDR imaging techniques usually have the issue of lower efficiency due to capturing of multiple photos. In this paper, an efficient method is proposed for HDR imaging technique to achieve better performance and lower noise. The Luminance-Chrominance-Gradient High Dynamic Range (LCGHDR) method is proposed to obtain the proper luminous value of images. The same scenario is captured at different exposure are processed by the proposed method. Based on these feature values extracted from the different images and exposure fusion technique was developed that helps for the proper imaging. This experiment was evaluated and analyzed by comparing with the other methods, which showed the efficiency of the proposed method. This method needs only 124.594 seconds for the computation, while existing method need 139.869 seconds for the same number of images.

Multispectral single shot imaging systems can benefit computer vision applications in needs of a compact and affordable imaging system. Spectral filter arrays technology meets the requirement, but can lead to artifacts due to inhomogeneous intensity levels between spectral channels due to filter manufacturing constraints, illumination and object properties. One solution to solve this problem is to use high dynamic range imaging techniques on these sensors. We define a spectral imaging pipeline that incorporates high dynamic range, demosaicing and color image visualization. Qualitative evaluation is based on real images captured with a prototype of spectral filter array sensor in the visible and near infrared.

This paper evaluates the suitability of High Dynamic Range (HDR) imaging techniques for feature point detection under extreme lighting conditions. The conditions are extreme in respect to the dynamic range of the lighting within the test scenes used. This dynamic range cannot be captured using standard low dynamic range imagery techniques without loss of detail. Four widely used feature point detectors are used in the experiments: Harris corner detector, Shi-Tomasi, FAST and Fast Hessian. Their repeatability rate is studied under changes of camera viewpoint, camera distance and scene lighting with respect to the image formats used. The results of the experiments show that HDR imaging techniques improve the repeatability rate of feature point detectors significantly.

High dynamic range imaging (HDRI) methods in computational photography address situations where the dynamic range of a scene exceeds what can be captured by an image sensor in a single exposure. HDRI techniques have also been used to construct radiance maps in measurement applications; unfortunately, the design and evaluation of HDRI algorithms for use in these applications have received little attention. In this paper, we develop a novel HDRI technique based on pixel-by-pixel Kalman filtering and evaluate its performance using objective metrics that this paper also introduces. In the presented experiments, this new technique achieves as much as 9.4-dB improvement in signal-to-noise ratio and can achieve as much as a 29% improvement in radiometric accuracy over a classic method.

Some scenes and objects have a wide range of brightness that cannot be captured with a conventional camera. This limitation, which degrades the dynamic range of an imaged scene or object, is addressed by use of high dynamic range (HDR) imaging techniques. With HDR ima- ging techniques, images of a very broad range of intensity can be obtained with conventional cameras. Another limitation of conventional cameras is the range of wavelength that they can capture. Outside the visible wave- lengths, the responsivity of conventional cameras drops; therefore, a con- ventional camera cannot capture images in nonvisible wavelengths. Compressive imaging is a solution for this problem. Compressive imaging reduces the number of pixels of a camera to one, so a camera can be replaced by a detector with one pixel. The range of wavelengths to which such detectors are responsive is much wider than that of a conven- tional camera. A combination of HDR imaging and compressive imaging is introduced and is benefitted from the advantages of both techniques. An algorithm that combines these two techniques is proposed, and results are presented. © 2012 Society of Photo-Optical Instrumentation Engineers

Physical or virtual models are commonly employed to visualize the conceptual ideas of architects, lighting designers and daylighting researchers. The models are also used to assess the daylighting performance of their buildings, particularly when Complex Fenestration Systems (CFS) are considered. Recent studies have revealed a general tendency of physical models to over- estimate the performance, usually expressed through work plane illuminance and daylight factor profiles, when compared to that of the real building. These discrepancies can be attributed to several experimental errors. To analyze the main sources of error, a set of comparisons between a real building, a virtual model and a physical model was undertaken. The real building in our case consisted of a full scale test module with a south-facing windows designed for experimentation on daylighting systems. A virtual model was a computed model created in Radiance program while the physical model was a scale model (1:10) of the real case. The fenestration systems considered in this study were a simple window (double glazing) and two CFS (Laser-cut panel and Prismatic film). The physical model was placed in outdoor conditions similar to that of the real building as well as under a scanning sky simulator (for both real sky luminance distribution and CIE standard sky); the virtual model simulations were carried out with the program Radiance using the GenSky function (for CIE standard sky) and the Partial Daylight Factor (PDF) method, the later using the real sky luminance distribution acquired by a digital sky scanner at the same time as the real building's daylight performance was assessed. The daylighting performances of the building, daylight factor (DF) for overcast sky and illuminance ratio (IR) for clear sky, were monitored using illuminance meters: a set of sensors for exterior illuminance and another set of equally spaced 7 sensors placed at 1m intervals starting from the window plane for the interior space were used for that purpose. The interior surface luminance of both real building and physical model was measured using a luminance meter and a High Dynamic Range (HDR) imaging technique (within the Photosphere program). The Radiance program was used to determine the interior surface luminance within the virtual model. The measured performance of the real case, physical models and virtual models were compared, the causes of discrepancies between the real building and models were analyzed. The causes of errors that were evaluated were modeling of building details and dimensions, CFS modeling, mocking-up of the photometric properties (surface reflectance and window transmittance), model location as well as photometer features. To study the impact of these error sources on daylighting performance assessment, virtual models created using the Radiance program were used to achieve a sensitivity analysis of modeling errors. The significant factors were considered, leading to a set of modeling guidelines. The experimental study shows that large discrepancies can occur in daylighting performance figures. For example if glazings are omitted from the model's window, a relative divergence of 25% to 40% can be found at different points in the room, suggesting more light entering than actually measured in the real building. Inaccuracy in window transmittance inaccuracy is a major cause of errors commonly found in daylight modeling. In addition, significant discrepancies can be caused by even slight error in surface reflectance values. Only 10% overestimation of surface reflectance modeling leads up to 80% relative errors in work plane illuminance for a simple window and up to 90% for the assessment of CFS. Continuous sky distribution presented more accurate results than 145 sky sectors simulation, particularly when CFS were evaluated. These discrepancies can be reduced by making an effort to mock up the geometric and photometric features including the daylight simulation of the models carefully. A checklist presented in this thesis can be used as a guideline to help the daylight designers to estimate and avoid errors when assessing daylighting performance.

This paper describes a new method to automatically improve scene lighting for video conferencing by learning the photometric mapping between a lower exposure and desired exposure created using High Dynamic Range (HDR) imaging techniques. Once the mapping is learned in a calibration step, it can be used to transform all subsequent images, effectively producing higher dynamic range video without ghosting artifacts. A stereo algorithm is also described that allows multiple exposures to be taken at every frame, useful if the lighting of a scene changes significantly. Results show that this is an effective way to improve face lighting and therefore the overall experience of video conferencing.

Today, high dynamic range (HDR) imaging, image-based lighting (IBL) and special effects techniques are common features found in many non-real-time rendering systems (offline renderers). Although slowly being adopted by game developers, few real-time rendering tools provide a seamless integration and persistent use of these techniques throughout their systems.

Multi-scale exposure fusion is a powerful approach to fuse variously low dynamic range images into a high quality image. Fine and attractive information of source images is added in the resultant image. It may yield better fusion result than the images fused by single scale exposure fusion. In multi-scale exposure fusion possibility of halo artifact can be produced and the details in darkest and brightest areas are normally not retained in the final fused image. Based on image segmentation and edge preserving filtration technique a novel algorithm is proposed in this paper for multi-scale exposure images. Taking advantage of super pixel (image segmentation) along with edge preserving technique, details in the darkest and brightest regions are well protected which removes the halo artifacts produced in the fused image. The outcome of experiments proved that proposed algorithm provides better results than other state of the art algorithms used for image fusion.

Exposure fusion is an efficient way to produce a high-quality image for common Low Dynamic Range (LDR) output devices from multiple differently exposed LDR images of the same scene, which has significant potential to be applied in the ubiquitous multimedia area. Generating the fused image with high local contrast from fewer exposed images is still a challenging task. A novel method is proposed in this paper to fuse two differently exposed images based on the spatial distribution of intensity, which consists of two steps. First, the weights are computed based on the background context of the average image for producing the initial fused image. Then, we propose to enhance the initial fused image through removing the background context and efficiently refuse them. So the proposed method improves the local contrast in the dark region and keeps the color in the bright region. Experimental results and comparisons with the existing exposure fusion methods demonstrate that the proposed method has better performance and is convenient for GPU realization.

In this paper, we present a general variational method for image fusion. In particular, we combine different images of the same subject to a single composite that offers optimal exposedness, saturation and local contrast. Previous research approaches this task by first pre‐computing application‐specific weights based on the input, and then combining these weights with the images to the final composite later on. In contrast, we design our model assumptions directly on the fusion result. To this end, we formulate the output image as a convex combination of the input and incorporate concepts from perceptually inspired contrast enhancement such as a local and non‐linear response. This output‐driven approach is the key to the versatility of our general image fusion model. In this regard, we demonstrate the performance of our fusion scheme with several applications such as exposure fusion, multispectral imaging and decolourization. For all application domains, we conduct thorough validations that illustrate the improvements compared to state‐of‐the‐art approaches that are tailored to the individual tasks.