Face Recognition and Drunk Classification Using Infrared Face Images

This paper describes a fusion of visual and thermal infrared (IR) images for robust face recognition. Two types of fusion methods are discussed: data fusion and decision fusion. Data fusion produces an illumination-invariant face image by adaptively integrating registered visual and thermal face images. Decision fusion combines matching scores of individual face recognition modules. In the data fusion process, eyeglasses, which block thermal energy, are detected from thermal images and replaced with an eye template. Three fusion-based face recognition techniques are implemented and tested: Data fusion of visual and thermal images (Df), Decision fusion with highest matching score (Fh), and Decision fusion with average matching score (Fa). A commercial face recognition software FaceIt® is used as an individual recognition module. Comparison results show that fusion-based face recognition techniques outperformed individual visual and thermal face recognizers under illumination variations and facial expressions.

In the current scenario face identification and recognition is an important technique in surveillance. The face is a necessary biometric in humans. Therefore face detection plays a major job in computer vision applications. Several face recognition and emotions classification approaches have been presented throughout the last few decades of research to improve the rate of face recognition for thermal pictures. However, in real-time, lighting conditions might change due to several factors, such as the different times of capture, weather, etc. Due to variations in lighting intensity, the performance of the facial expression recognition system is not good. This paper proposed a model for human thermal face detection and expression classification. Four main steps were involved in this research. Initially, the Difference of the Gaussian (DOG) filter is utilized to crop the input thermal images and then normalize the images using the median filter in pre-processing step. Then, Efficient Net is used for extracting features such as shape, location, and occurrences from thermal face images. After that, detect human faces utilized by the YOLOv4 technique to better emotions classification. Finally, classify the emotions on faces by using the DenseNet technique into seven emotions such as happy, sad, disgust, surprise, anger, fear, and neutral. The proposed method outperforms state-of-art techniques for face recognition on thermal pictures, and classifies the expressions, according to experimentations on the RGB-D-T database. The accuracy, precision, recall, and f1-score metrics will be utilized with the database to assess the efficacy of the proposed methodology. The proposed models achieve a high classification accuracy of 95.97% on the RGB-D-T database. Furthermore, the outcomes show good precision for various face recognition tasks.

Visible face recognition systems, being vulnerable to illumination, expression, and pose, can not achieve robust performance in unconstrained situations. Meanwhile, near infrared face images, being light- independent, can avoid or limit the drawbacks of face recognition in visible light, but its main challenges are low resolution and signal noise ratio (SNR). Therefore, near infrared and visible fusion face recognition has become an important direction in the field of unconstrained face recognition research. In this paper, a novel fusion algorithm in non-subsampled contourlet transform (NSCT) domain is proposed for Infrared and visible face fusion recognition. Firstly, NSCT is used respectively to process the infrared and visible face images, which exploits the image information at multiple scales, orientations, and frequency bands. Then, to exploit the effective discriminant feature and balance the power of high-low frequency band of NSCT coefficients, the local Gabor binary pattern (LGBP) and Local Binary Pattern (LBP) are applied respectively in different frequency parts to obtain the robust representation of infrared and visible face images. Finally, the score-level fusion is used to fuse the all the features for final classification. The visible and near infrared face recognition is tested on HITSZ Lab2 visible and near infrared face database. Experiments results show that the proposed method extracts the complementary features of near-infrared and visible-light images and improves the robustness of unconstrained face recognition.

Face recognition is an area of computer vision that has attracted a lot of interest from the research community. A growing demand for robust face recognition software in security applications has driven the development of interesting approaches in this field. A large quantity of research in face recognition deals with visible face images. In the visible spectrum the illumination and face expressions changes represent a significant challenge for the recognition system. To avoid these problems, researchers proposed recently the use of 3D and infrared imaging for face recognition. In this work, we introduce a new framework for infrared face recognition using texture descriptors. This framework exploits linear and non linear dimensionality reduction techniques for face learning and recognition in the texture space. Active and passive infrared imaging modalities are used and comparison with visible face recognition is performed. Two multispectral face recognition databases were used in our experiments: Equinox Database (Visible, SWIR, MWIR, LWIR) and Laval University Multispectral Database (Visible, NIR, MWIR, LWIR). The obtained results show high increase in recognition performance when texture descriptors like LBP (Local Binary Pattern) and LTP (Local Ternary Pattern) are used. The best result was obtained in the short wave infrared spectrum (SWIR) using non linear dimensionality reduction techniques.

Recognition of emotions based on facial expressions has received increasing attention from the scientific community over the last years. Several fields of applications can benefit from facial emotion recognition, such as behavior prediction, interpersonal relations, human-computer interactions, recommendation systems. In this work, we develop and analyze an emotion recognition framework based on facial expressions robust to occlusions through the Weber Local Descriptor (WLD). Initially, the occluded facial expressions are reconstructed following an extension approach of Robust Principal Component Analysis (RPCA). Then, WLD features are extracted from the facial expression representation, as well as Local Binary Patterns (LBP) and Histogram of Oriented Gradients (HOG). The feature vector space is reduced using Principal Component Analysis (PCA) and Linear Discriminant Analysis (LDA). Finally, K-Nearest Neighbor (K-NN) and Support Vector Machine (SVM) classifiers are used to recognize the expressions. Experimental results on three public datasets demonstrated that the WLD representation achieved competitive accuracy rates for occluded and non-occluded facial expressions compared to other approaches available in the literature.

Robust and discriminative feature extraction without any controlled light intensity condition is vital for a real-time face recognition system. The Weber Local Descriptor (WLD) is an effective and robust face representation algorithm. However, WLD actually exploits the contrast information, which can still be sensitive to illumination changes. To overcome this problem, in this article, we take gradients into account and propose a novel operator, called Weber Local Gradient Descriptor (WLGD).This method produces the fusion characteristic and describes the facial texture through the computation of horizontal and diagonal gradients respectively. Experimental results on the ORL face database and infrared face database demonstrate that the proposed WLGD algorithm outperforms some state-of-art methods.

Face is the representation of one’s identity. Hence, we have proposed an automated student attendance system based on face recognition. Face recognition system is very useful in life applications especially for attendance system. In our proposed approach, firstly, video framing is performed by activating the camera through a user-friendly interface. In the pre-processing stage, scaling of the size of images is performed, if necessary, in order to prevent loss of information. In face recognition stage, enhanced local binary pattern (LBP) and principal component analysis (PCA) is applied correspondingly in order to extract the features from facial images. Another way of marking the attendance is fingerprint recognition. To mark the attendance students simply have to give the fingerprint impression in fingerprint scanner module. Finally, the attendance of the recognized student will be marked and saved in the excel file. The student who is not registered will also be able to register on the spot and notification will be given if students sign in more than once. Whenever seminar is completed then a link is sent on email. It includes the information in terms of feedback. When student fills the feedback form then analysis of overall session is done.

In this paper, a robust face recognition algorithm is proposed, which is based on the elastic graph matching (EGM) and discriminative feature analysis algorithm. We introduce a cost function for the EGM taking account of variations in face pose and facial expressions, and propose its optimization procedure. Our proposed cost function uses a set of Gabor-wavelet-based features, called robust jet, which are robust against the variations. The robust jet is defined in terms of discrete Fourier transform coefficients of Gabor coefficients. To cope with the difference between face poses of test face and reference faces, 2 x 2 warping matrix is incorporated in the proposed cost function. For the discriminative feature analysis, linear projection discriminant analysis and kernel-based projection discriminant analysis are introduced. These methods are motivated to solve the small-size problem of training samples. The basic idea of PDA is that a class is represented by a subspace spanned by some training samples of the class instead of using sample mean vector, that the distance from a pattern to a class is defined by using the error vector between the pattern and its projection to the subspace representing the class, and that an optimum feature selection rule is developed using the distance concept in a similar way as in the conventional linear discriminant analysis. In order to evaluate the performance of our face recognition algorithm, we carried out some experiments using the well-known FERET face database, and compared the performance with recently developed approaches. We observed that our algorithm outperformed the compared approaches.

Feature selection is an NP-hard problem from the viewpoint of algorithm design and it is one of the main open problems in pattern recognition. In this paper, we propose a new evolutionary-incremental framework for feature selection. The proposed framework can be applied on an ordinary evolutionary algorithm (EA) such as genetic algorithm (GA) or invasive weed optimization (IWO). This framework proposes some generic modifications on ordinary EAs to be compatible with the variable length of solutions. In this framework, the solutions related to the primary generations have short length. Then, the length of solutions may be increased through generations gradually. In addition, our evolutionary-incremental framework deploys two new operators called addition and deletion operators which change the length of solutions randomly. For evaluation of the proposed framework, we use that for feature selection in the application of face recognition. In this regard, we applied our feature selection method on a robust face recognition algorithm which is based on the extraction of Gabor coefficients. Experimental results show that our proposed evolutionary-incremental framework can select a few number of features from existing thousands features efficiently. Comparison result of the proposed methods with the previous methods shows that our framework is comprehensive, robust, and well-defined to apply on many EAs for feature selection.

In this paper one investigation has been done to find the optimum level of fusion to find a fused image from visual as well as thermal images. Because of the use of face recognition system in critical areas like, authenticating an authorized person in highly secured areas, investigation of criminals, online monitoring etc, face recognition system should be very robust and accurate one. This work is an attempt to fuse visual and thermal face images at optimum level to extract the advantages of visual as well as thermal images. In our work, Object Tracking and Classification Beyond Visible Spectrum (OTCBVS) database has been used for the visual and thermal images. Among all the experiments a maximum recognition result obtained is 93%.

The current dominant approaches to face recognition rely on facial characteristics that are on or over the skin. Some of these characteristics have low permanency can be altered, and their phenomenology varies significantly with environmental factors (e.g., lighting). Many methodologies have been developed to address these problems to various degrees. However, the current framework of face recognition research has a potential weakness due to its very nature. We present a novel framework for face recognition based on physiological information. The motivation behind this effort is to capitalize on the permanency of innate characteristics that are under the skin. To establish feasibility, we propose a specific methodology to capture facial physiological patterns using the bioheat information contained in thermal imagery. First, the algorithm delineates the human face from the background using the Bayesian framework. Then, it localizes the superficial blood vessel network using image morphology. The extracted vascular network produces contour shapes that are characteristic to each individual. The branching points of the skeletonized vascular network are referred to as Thermal Minutia Points (TMPs) and constitute the feature database. To render the method robust to facial pose variations, we collect for each subject to be stored in the database five different pose images (center, midleft profile, left profile, midright profile, and right profile). During the classification stage, the algorithm first estimates the pose of the test image. Then, it matches the local and global TMP structures extracted from the test image with those of the corresponding pose images in the database. We have conducted experiments on a multipose database of thermal facial images collected in our laboratory, as well as on the time-gap database of the University of Notre Dame. The good experimental results show that the proposed methodology has merit, especially with respect to the problem of low permanence over time. More importantly, the results demonstrate the feasibility of the physiological framework in face recognition and open the way for further methodological and experimental research in the area.

In this paper, we present a system for person re-identification in TV series. In the context of video retrieval, person re-identification refers to the task where a user clicks on a person in a video frame and the system then finds other occurrences of the same person in the same or different videos. The main characteristic of this scenario is that no previously collected training data is available, so no person-specific models can be trained in advance. Additionally, the query data is limited to the image that the user clicks on. These conditions pose a great challenge to the re-identification system, which has to find the same person in other shots despite large variations in the person's appearance. In the study, facial appearance is used as the re-identification cue, since, in contrast to surveillance-oriented re-identification studies, the person can have different clothing in different shots. In order to increase the amount of available face data, the proposed system employs a face tracker that can track faces up to full profile views. This makes it possible to use a profile face image as query image and also to retrieve images with non-frontal poses. It also provides temporal association of the face images in the video, so that instead of using single images for query or target, whole tracks can be used. A fast and robust face recognition algorithm is used to find matching faces. If the match result is highly confident, our system adds the matching face track to the query set. Finally, if the user is not satisfied with the number of returned results, the system can present a small number of candidate face images and lets the user confirm the ones that belong to the queried person. These features help to increase the variation in the query set, making it possible to retrieve results with different poses, illumination conditions, etc. The system is extensively evaluated on two episodes of the TV series Coupling, showing very promising results.

This paper proposes a method for race recognition from face images using local descriptors. The proposed method uses two types of local descriptors: local binary pattern (LBP) and Weber local descriptors (WLD). First, LBP and WLD histograms are obtained separately from blocks of normalized face image. Kruskal-Wallis feature selection technique is applied to the histograms to select the significant bins for race recognition. Then the selected bins from the two histograms are concatenated block by block to produce the final feature set of the face image. Minimum city block distance is used as a classifier. The experiments are conducted using gray scale FERET images with five race groups. Experimental results show that the proposed method has superior race recognition accuracies for all the five race groups compared to LBP and WLD alone.

The performance of face recognition systems can be dramatically degraded when the pose of the probe face is different from the gallery face. In this paper, we present a pose robust face recognition model, centered on modeling how face patches change in appearance as the viewpoint varies. We present a novel model based on two robust local appearance descriptors, Gabor wavelets and Local Binary Patterns (LBP). These two descriptors have been widely exploited for face recognition and different strategies for combining them have been investigated. However, to the best of our knowledge, all existing combination methods are designed for frontal face recognition. We introduce a local statistical framework for face recognition across pose variations, given only one frontal reference image. The method is evaluated on the Feret pose dataset and experimental results show that we achieve very high recognition rates over the wide range of pose variations presented in this challenging dataset.

Based on neural network and local binary pattern algorithm, this paper builds a lightweight artificial face recognition system on chip Firefly-RK3399, with high speed, strong robustness and high recognition accuracy. Our embedded artificial intelligent face recognition system mainly consists of face detection, feature extraction and recognition. Multi-task convolutional neural network (MTCNN) under the CaffeOnACL framework is utilized for face detection, and the local binary pattern (LBP) is applied as face recognition algorithm. Experiments illustrate that our artificial intelligent embedded face recognition system has high speed and accuracy, which is easy-carrying and of high commercial value as well.