Facial Expression Recognition and Generation for Virtual Characters Using an Enhanced MTCNN with HR-PCN and GCN

Convolutional neural network (CNN) based image steganalysis are increasingly popular because of their superiority in accuracy. The most straightforward way to employ CNN for image steganalysis is to learn a CNN-based classifier to distinguish whether secret messages have been embedded into an image. However, it is difficult to learn such a classifier because of the weak stego signals and the limited useful information. To address this issue, in this paper, a multi-task learning CNN is proposed. In addition to the typical use of CNN, learning a CNN-based classifier for the whole image, our multi-task CNN is learned with an auxiliary task of the pixel binary classification, estimating whether each pixel in an image has been modified due to steganography. To the best of our knowledge, we are the first to employ CNN to perform the pixel-level classification of such type. Experimental results have justified the effectiveness and efficiency of the proposed multi-task learning CNN.

Video-based human action recognition is one of the most important and challenging areas of research in the field of computer vision. Human action recognition has found many pragmatic applications in video surveillance, human-computer interaction, entertainment, autonomous driving, etc. Owing to the recent development of deep learning methods for human action recognition, the performance of action recognition has significantly enhanced for challenging datasets. Deep learning techniques are mainly used for recognizing actions in images and videos comprising of Euclidean data. A recent development in deep learning methods is the extension of these techniques to non-Euclidean data or graph data with many nodes and edges. Human body skeleton resembles a graph, therefore, the graph convolutional network (GCN) is applicable to the non-Euclidean body skeleton. In the past few years, GCN has emerged as an important tool for skeleton-based action recognition. Therefore, we conduct a survey using GCN methods for action recognition. Herein, we present a comprehensive overview of recent GCN techniques for action recognition, propose a taxonomy for the categorization of GCN techniques for action recognition, carry out a detailed study of the benchmark datasets, enlist relevant resources and open-source codes, and finally provide an outline for future research directions and trends. To the best of authors' knowledge, this is the first survey for action recognition using GCN techniques.

Exploring the optimization of communication strategies for animation films in the context of cross-cultural communication, this research integrates the Internet of Things (IoT) and convolutional networks. The research constructs a collaborative filtering (CF) movie recommendation model based on a graph convolutional neural network (GCN) and investigates its application in cross-cultural communication. The fusion of IoT and convolutional networks in movie communication is also analyzed, and the effectiveness of the proposed GCN-CF model is validated through comparative experiments. The results indicate that, compared to other models, the GCN-CF model achieves the lowest Root Mean Square Error (RMSE) on the MovieLens 100 K and MovieLens 1 M datasets, with values of 0.8762 and 0.8275, respectively. Compared to traditional models, the GCN-CF model exhibits significantly superior performance in terms of RMSE, with reductions ranging from 0.6 to 5.2%, highlighting its heightened detection accuracy and overall performance. Moreover, the performance of the GCN-CF model is enhanced after introducing attention mechanisms and auxiliary information on both datasets, showing an improvement of 0.4% compared to the scenario without these additions. This data demonstrates the effectiveness of attention mechanisms and auxiliary information. Finally, the research presents an animation film communication strategy based on IoT and convolutional networks, offering novel insights for film production and communication, along with positive implications for cultural exchange and the advancement of the global media industry.

Geometric deep learning provides a principled and universal way for the integration of imaging and non-imaging modes in the medical field. Graph Convolutional Networks (GCNs) have been widely explored in a variety of problems, such as disease prediction, segmentation, and matrix completion. Using large, multi-modal data sets, graphs can capture the interaction of individual elements represented as nodes in the graphs. In particular, in medical applications, nodes can represent individuals (patients or healthy controls) in a potentially large population and are accompanied by a set of features, while the edges of the graph contain the associations between subjects in an intuitive way. This representation allows the inclusion of rich imaging and non-imaging information as well as individual subject characteristics in the task of disease classification. This article gives an overview of graph convolutional neural networks, focusing on the application of graph convolutional neural networks in disease prediction, and discusses the challenges and prospects of graph convolutional neural networks in disease prediction.

With the work and study pressure on people increasing and the importance of mental health problems on the rise, facial expression analysis plays an important role in mental health auxiliary diagnosis and treatment (MHADT). This study proposes a facial expression localization and recognition model that integrates Main Directional Mean Optical Flow (MDMO) with the Transformer architecture. It addresses the problems of insufficient generalization ability and limited temporal modeling ability of traditional methods in facial expression recognition. The study is based on the authoritative Audio/Visual Emotion Challenge 2019 Depression Detection Sub-challenge (AVEC2019 DDS) dataset in the mental health field, which contains 163 training samples, 56 validation samples, and 56 test samples. With Explicit Shape Regression, Local Binary Patterns, Mnemonic Descent Method, Convolutional Neural Network, and benchmark models as comparison objects, it systematically evaluates the model's performance in error, accuracy, and processing speed. The results show that the model achieves the best performance in both facial expression localization and recognition tasks. The validation set errors are 7.26 and 6.85, the localization accuracy reaches 89.6%, and the recognition accuracy reaches 88.9%, which is significantly better than other methods. At the same time, its image processing time is 55 milliseconds (ms) and 44ms, balancing high precision and real-time performance. The study indicates that the fusion of MDMO and Transformer can effectively capture the spatial and temporal features of facial expressions. Thus, this fusion method provides an efficient, stable, and scalable technical solution for emotion recognition in MHADT. This improves both the FER and localization accuracy and effect. Besides, it provides a novel reference in both approaches and application level for the intelligent development of mental health evaluation.

miRNAs are important regulators for many crucial biological processes. Many recent studies have shown that miRNAs are closely related to various human diseases and can be potential biomarkers or therapeutic targets for some diseases, such as cancers. Therefore, accurately predicting miRNA-disease associations is of great importance for understanding and curing diseases. However, how to efficiently utilize the characteristics of miRNAs and diseases and the information on known miRNA-disease associations for prediction is still not fully explored. In this study, we propose a novel computational method for predicting miRNA-disease associations. The proposed method combines the graph convolutional network and the hypergraph convolutional network. The graph convolutional network is utilized to extract the information from miRNA-similarity data as well as disease-similarity data. Based on the representations of miRNAs and diseases learned by the graph convolutional network, we further use the hypergraph convolutional network to capture the complex high-order interactions in the known miRNA-disease associations. We conduct comprehensive experiments with different datasets and predictive tasks. The results show that the proposed method consistently outperforms several other state-of-the-art methods. We also discuss the influence of hyper-parameters and model structures on the performance of our method. Some case studies also demonstrate that the predictive results of the method can be verified by independent experiments.

ObjectiveWe implement 2 different multitask learning (MTL) techniques, hard parameter sharing and cross-stitch, to train a word-level convolutional neural network (CNN) specifically designed for automatic extraction of cancer data from unstructured text in pathology reports. We show the importance of learning related information extraction (IE) tasks leveraging shared representations across the tasks to achieve state-of-the-art performance in classification accuracy and computational efficiency.Materials and MethodsMultitask CNN (MTCNN) attempts to tackle document information extraction by learning to extract multiple key cancer characteristics simultaneously. We trained our MTCNN to perform 5 information extraction tasks: (1) primary cancer site (65 classes), (2) laterality (4 classes), (3) behavior (3 classes), (4) histological type (63 classes), and (5) histological grade (5 classes). We evaluated the performance on a corpus of 95 231 pathology documents (71 223 unique tumors) obtained from the Louisiana Tumor Registry. We compared the performance of the MTCNN models against single-task CNN models and 2 traditional machine learning approaches, namely support vector machine (SVM) and random forest classifier (RFC).ResultsMTCNNs offered superior performance across all 5 tasks in terms of classification accuracy as compared with the other machine learning models. Based on retrospective evaluation, the hard parameter sharing and cross-stitch MTCNN models correctly classified 59.04% and 57.93% of the pathology reports respectively across all 5 tasks. The baseline models achieved 53.68% (CNN), 46.37% (RFC), and 36.75% (SVM). Based on prospective evaluation, the percentages of correctly classified cases across the 5 tasks were 60.11% (hard parameter sharing), 58.13% (cross-stitch), 51.30% (single-task CNN), 42.07% (RFC), and 35.16% (SVM). Moreover, hard parameter sharing MTCNNs outperformed the other models in computational efficiency by using about the same number of trainable parameters as a single-task CNN.ConclusionsThe hard parameter sharing MTCNN offers superior classification accuracy for automated coding support of pathology documents across a wide range of cancers and multiple information extraction tasks while maintaining similar training and inference time as those of a single task–specific model.

As the main expression medium of emotion, facial expression is used to explore personal emotion through facial expression recognition. The convolutional neural network architecture in deep learning can combine the emotion feature extraction and classification process, showing great advantages in emotion recognition by reducing the amount of computation and reference. In this paper, a deep learning-based facial expression recognition algorithm is proposed to realize expression analysis. The structure of multi-task convolutional neural network (MTCNN) is analyzed, the feature pyramid structure is introduced to design the C-MTCNN optimization algorithm, and the Inception v3 model is used to complete the feature extraction and emotion classification. The optimization of PCA algorithm and parameter adjustment on P-Net greatly improves the recognition accuracy of captured images, so as to realize the analysis of personal emotions. By testing the algorithm, the accuracy of the algorithm and the effect of the system are verified.

Detecting anomalous traffic behaviors with seasonal deep Kalman filter graph convolutional neural networks

LightGCAN: A lightweight graph convolutional attention network for user preference modeling and personalized recommendation

Automatic building extraction from optical imagery remains a challenge due to, for example, the complexity of building shapes. Semantic segmentation is an efficient approach for this task. The latest development in deep convolutional neural networks (DCNNs) has made accurate pixel-level classification tasks possible. Yet one central issue remains: the precise delineation of boundaries. Deep architectures generally fail to produce fine-grained segmentation with accurate boundaries due to their progressive down-sampling. Hence, we introduce a generic framework to overcome the issue, integrating the graph convolutional network (GCN) and deep structured feature embedding (DSFE) into an end-to-end workflow. Furthermore, instead of using a classic graph convolutional neural network, we propose a gated graph convolutional network, which enables the refinement of weak and coarse semantic predictions to generate sharp borders and fine-grained pixel-level classification. Taking the semantic segmentation of building footprints as a practical example, we compared different feature embedding architectures and graph neural networks. Our proposed framework with the new GCN architecture outperforms state-of-the-art approaches. Although our main task in this work is building footprint extraction, the proposed method can be generally applied to other binary or multi-label segmentation tasks.

Cross-subject emotion recognition in brain-computer interface based on frequency band attention graph convolutional adversarial neural networks

Background: Individuals with child maltreatment (CM) experiences show alterations in emotion recognition (ER). However, previous research has mainly focused on populations with specific mental disorders, which makes it unclear whether alterations in the recognition of facial expressions are related to CM, to the presence of mental disorders or to the combination of CM and mental disorders, and on ER of emotional, rather than neutral facial expressions. Moreover, commonly, recognition of static stimulus material was researched. Objective: We assessed recognition of dynamic (closer to real life) negative, positive and neutral facial expressions in individuals characterised by CM, rather than a specific mental disorder. Moreover, we assessed whether they show a negativity bias for neutral facial expressions and whether the presence of one or more mental disorders affects recognition. Methods: Ninety-eight adults with CM experiences (CM+) and 60 non-maltreated (CM−) adult controls watched 200 non-manipulated coloured video sequences, showing 20 neutral and 180 emotional facial expressions, and indicated whether they interpreted each expression as neutral or as one of eight emotions. Results: The CM+ showed significantly lower scores in the recognition of positive, negative and neutral facial expressions than the CM− group (p < .050). Furthermore, the CM+ group showed a negativity bias for neutral facial expressions (p < .001). When accounting for mental disorders, significant effects stayed consistent, except for the recognition of positive facial expressions: individuals from the CM+ group with but not without mental disorder scored lower than controls without mental disorder. Conclusions: CM might have long-lasting influences on the ER abilities of those affected. Future research should explore possible effects of ER alterations on everyday life, including implications of the negativity bias for neutral facial expressions on emotional wellbeing and relationship satisfaction, providing a basis for interventions that improve social functioning.

Facial expression recognition (FER) has made significant progress over the past few years. But how to overcome the problem of high inter-class similarity and large intra-class difference in FER is still challenging. To address this problem, we propose a novel FER framework called AU-assisted Visual Transformer (AVT) by incorporating facial action units (AU) information into Visual Transformer, which mainly consists of three modules: Local Feature Extraction (LFE) module, Global Relationship Modeling (GRM) module and AU Fusion Module (AFM). Specifically, the LFE module aims to extract local facial expression features by using a deep convolutional neural network, the GRM module is a multi-layer Transformer encoder that captures the relation between local facial regions and obtains a global understanding of the face, and in particular, the AFM introduces fine-grained AU feature and fuses it with expression feature for final classification. Extensive experiments are conducted on RAF-DB and FERPlus datasets, and our AVT achieves competitive results compared to previous state-of-the-art methods, demonstrating the effectiveness of our approach.

Vehicle trajectory prediction is an important research basis for the decision making and path planning of the intelligent and connected vehicle. In the connected vehicle environment, vehicles share information and drive cooperatively, and the intelligent and connected vehicles are able to obtain more accurate and rich perception information, which provides a data basis for accurate prediction of vehicle trajectories. However, attaining accurate and effective vehicle trajectory predictions poses technical challenges due to insufficient extraction of vehicular spatial–temporal interaction features. In this paper, we propose a vehicle trajectory prediction model based on graph convolutional neural network (GCN) in a connected vehicle environment. Specifically, using the driving scene information obtained by the intelligent and connected vehicle, the spatial graph and temporal graph are constructed based on the spatial interaction coefficient (SIC) and self-attention mechanism, respectively. Then, the graph data are entered into the interaction extraction module, and the spatial interaction features and temporal interaction features are extracted separately using the graph convolutional networks, which are fused to obtain the spatial–temporal interaction information. Finally, the interaction features are learned based on the convolutional neural networks to output the future trajectory information of all vehicles in the scene by one forward operation rather than a step-by-step process. The ablation experiment results show that the method proposed in this study to model the spatiotemporal interaction among vehicles based on SIC and self-attention mechanism reduces the prediction error by 5% and 12%, respectively. The results from the model comparison experiment show that the proposed method engenders an 8% improvement in prediction accuracy over the state-of-the-art solution, providing technical and theoretical support for trajectory prediction research of intelligent and connected vehicles.