Fading Noise Suppression Method of Φ-OTDR System Based on GA-VMD Algorithm

Various faults inevitably occur in mechanical systems and may result in unexpected failures. Hence, fault detection is critical to reduce unscheduled downtime and costly breakdowns. Empirical mode decomposition (EMD) is an adaptive time-frequency domain signal processing method, potentially suitable for nonstationary and/or nonlinear processes. However, the EMD method suffers from several problems such as mode mixing, defined as intrinsic mode functions (IMFs) with incorrect scales. In this paper, an ensemble noise-reconstructed EMD method is proposed to ameliorate the mode mixing problem and denoise IMFs for enhancing fault signatures. The proposed method defines the IMF components as an ensemble mean of EMD trials, where each trial is obtained by sifting signals that have been reconstructed using the estimated noise present in the measured signal. Unlike traditional denoising methods, the noise inherent in the input data is reconstructed and used to reduce the background noise. Furthermore, the reconstructed noise helps to project different scales of the signal onto their corresponding IMFs, instrumental in alleviating the mode mixing problem. Two critical issues concerned in the method, i.e., the noise estimation strategy and the number of EMD trials required for denoising are discussed. Furthermore, a comprehensive noise-assisted EMD method is proposed, which includes the proposed method and ensemble EMD (EEMD). Numerical simulations and experimental case studies on accelerometer data collected from an industrial shaving process are used to demonstrate and validate the proposed method. Results show that the proposed method can both detect impending faults and isolate multiple faults. Hence, the proposed method can act as a promising tool for mechanical fault detection.

A new denoising algorithm and feature extraction algorithm that combine a new kind of permutation entropy (NPE) and variational mode decomposition (VMD) are put forward in this paper. VMD is a new self-adaptive signal processing algorithm, which is more robust to sampling and noise, and also can overcome the problem of mode mixing in empirical mode decomposition (EMD) and ensemble EMD (EEMD). Permutation entropy (PE), as a nonlinear dynamics parameter, is a powerful tool that can describe the complexity of a time series. NPE, a new version of PE, is interpreted as distance to white noise, which shows a reverse trend to PE and has better stability than PE. In this paper, three kinds of ship-radiated noise (SN) signal are decomposed by VMD algorithm, and a series of intrinsic mode functions (IMF) are obtained. The NPEs of all the IMFs are calculated, the noise IMFs are screened out according to the value of NPE, and the process of denoising can be realized by reconstructing the rest of IMFs. Then the reconstructed SN signal is decomposed by VMD algorithm again, and one IMF containing the most dominant information is chosen to represent the original SN signal. Finally, NPE of the chosen IMF is calculated as a new complexity feature, which constitutes the input of the support vector machine (SVM) for pattern recognition of SN. Compared with the existing denoising algorithms and feature extraction algorithms, the effectiveness of proposed algorithms is validated using the numerical simulation signal and the different kinds of SN signal.

The electrical energy supply relies on the satisfactory operation of insulators. The ultrasound recorded from insulators in different conditions has a time series output, which can be used to classify faulty insulators. The random convolutional kernel transform (Rocket) algorithms use convolutional filters to extract various features from the time series data. This paper proposes a combination of Rocket algorithms, machine learning classifiers, and empirical mode decomposition (EMD) methods, such as complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN), empirical wavelet transform (EWT), and variational mode decomposition (VMD). The results show that the EMD methods, combined with MiniRocket, significantly improve the accuracy of logistic regression in insulator fault diagnosis. The proposed strategy achieves an accuracy of 0.992 using CEEMDAN, 0.995 with EWT, and 0.980 with VMD. These results highlight the potential of incorporating EMD methods in insulator failure detection models to enhance the safety and dependability of power systems.

A comparative study between Empirical Wavelet Transforms and Empirical Mode Decomposition Methods: Application to bearing defect diagnosis

Warships play an important role in the modern sea battlefield. Research on the line spectrum features of warship radio noise signals is helpful to realize the classification and recognition of different types of warships, and provides critical information for sea battlefield. In this paper, we proposed a novel linear spectrum frequency feature extraction technique for warship radio noise based on complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN), duffing chaotic oscillator (DCO), and weighted-permutation entropy (W-PE). The proposed linear spectrum frequency feature extraction technique, named CEEMDAN-DCO-W-PE has the following advantages in comparison with other linear spectrum frequency feature extraction techniques; (i) as an adaptive data-driven algorithm, CEEMDAN has more accurate and more reliable decomposition performance than empirical mode decomposition (EMD) and ensemble EMD (EEMD), and there is no need for presetting parameters, such as decomposition level and basis function; (ii) DCO can detect the linear spectrum of narrow band periodical warship signals by way of utilizing its properties of sensitivity for weak periodical signals and the immunity for noise; and (iii) W-PE is used in underwater acoustic signal feature extraction for the first time, and compared with traditional permutation entropy (PE), W-PE increases amplitude information to some extent. Firstly, warship radio noise signals are decomposed into some intrinsic mode functions (IMFs) from high frequency to low frequency by CEEMDAN. Then, DCO is used to detect linear spectrum of low-frequency IMFs. Finally, we can determine the linear spectrum frequency of low-frequency IMFs using W-PE. The experimental results show that the proposed technique can accurately extract the line spectrum frequency of the simulation signals, and has a higher classification and recognition rate than the traditional techniques for real warship radio noise signals.

Sudden cardiac death prediction based on the complete ensemble empirical mode decomposition method and a machine learning strategy by using ECG signals

Electroencephalograph (EEG) is brain activity measurement technique that it is widely used by placing electrode on the scalp. The EEG recording signals are vulnerably contaminated by noise. Thus, it can lead to misperception in analyzing EEG signals. One of the noise that has major influence on the recorded EEG signals is ocular artifacts (OAs). In this paper, a new method to remove OAs automatically is proposed by combining between Complete Ensemble Empirical Mode Decomposition (CEEMD) and Independent Component Analysis (ICA). CEEMD-ICA-OD removes OAs based on the concentration of noise that is calculated by calculating entropy for every CEEMD decomposition. Every selected decomposition of CEEMD will be used as input to the ICA method. Then, ICA will decompose selected CEEMD decomposition into independent components (ICs). Then, Chauvenet Criterion (CC) as Outlier Detection (OD) method is used to detect OAs pattern. Every detected OAs pattern will be eliminated by zeroing process on OAs pattern so that the EEG signal information remains secure. The proposed method were compared with Empirical Mode Decomposition (EMD), Ensemble EMD (EEMD) and Complete EEMD (CEEMD) with zeroing ICA combination for every comparison method. The performance measure of the proposed method and the benchmark method is calculated by using Root Mean Square Error (RMSE) and Signal to Noise Ratio (SNR) to show the performance quality in eliminating OAs. The experiment results show that the proposed method is successfully removing OAs better than the other methods with RMSE value and SNR value are 0.2491 and -0.3449, respectively.

Application of the EEMD method for distinction and suppression of motion-induced noise in grounded electrical source airborne TEM system

Application of tentative variational mode decomposition in fault feature detection of rolling element bearing

We have proposed a new denoising method for the simultaneous noise reduction and preservation of seismic signals based on variational mode decomposition (VMD). VMD is a recently developed adaptive signal decomposition method and an advance in non-stationary signal analysis. It solves the mode-mixing and non-optimal reconstruction performance problems of empirical mode decomposition that have existed for a long time. By using VMD, a multi-component signal can be non-recursively decomposed into a series of quasi-orthogonal intrinsic mode functions (IMFs), each of which has a relatively local frequency range. Meanwhile, the signal will focus on a smaller number of obtained IMFs after decomposition, and thus the denoised result is able to be obtained by reconstructing these signal-dominant IMFs. Synthetic examples are given to demonstrate the effectiveness of the proposed approach and comparison is made with the complete ensemble empirical mode decomposition, which demonstrates that the VMD algorithm has lower computational cost and better random noise elimination performance. The application of on field seismic data further illustrates the superior performance of our method in both random noise attenuation and the recovery of seismic events.

Recently, ensemble empirical mode decomposition (EEMD) method has been developed for non-linear and non-stationary signal analysis. The method can work on nature signals (non-linear and nonstationary signals) and reduce the speckle noise. With the EEMD method, the signal is decomposed into several intrinsic mode functions (IMFs) and the frequencies of IMFs are arranged in decrease order (high to low) after the EEMD processing. The scaling mode of the EEMD method is similar to wavelet transform, but the signal resolutions in different frequency domains do not decrease by down-sampling. There are a large population and a developed economy in Weihe watershed, the disasters of droughts and floods caused by the autumn precipitation (here is precipitation in September and October) less or more than normal cause great loss and serious influence. In this paper, we propose the EEMD method to decompose the autumn precipitation series in the Weihe river basin during last 50 years into several IMFs, then extract the information including in the precipitation series and get the characteristics of multi-scales. The result shows that it is well response to the autumn precipitation series in the Weihe river basin and to the abrupt climate change in late 1970s and early 1980s of last century. The response appears earlier for high time scales than for low time scales In addition, the expression of the response for high time scales is the form of variability, but it is the amplitude of variability for low time scales.

The decomposition number $K$ and penalty factor $\alpha $ in the variational mode decomposition (VMD) algorithm have a great influence on the decomposition effect and the accuracy of subsequent fault diagnosis. Therefore, a gear fault diagnosis method based on genetic mutation particle swarm optimization VMD and probabilistic neural network (GMPSO-VMD-PNN) algorithm is proposed in this paper. Firstly, the GMPSO algorithm is used to optimize the $[K,\alpha]$ parameter combination in the VMD algorithm, and the optimal $[K,\alpha]$ parameter combination of each gear fault vibration signal to be decomposed is selected. Then, the gear fault vibration signal is decomposed into several intrinsic mode functions (IMFs) by VMD, and the sample entropy value of each IMFs is extracted to form the feature vector of subsequent fault diagnosis. Finally, the characteristic vector of gear fault vibration signal is input into PNN model, and gear fault is accurately classified. By comparing with fixed parameter VMD algorithm, empirical mode decomposition (EMD) and complete ensemble empirical mode decomposition adaptive noise (CEEMDAN) algorithm, the superiority of this method in gear fault diagnosis is verified. Therefore, the GMPSO-VMD-PNN algorithm proposed in this paper has certain application value for gear fault diagnosis.

Ferromagnetic materials are extensively utilized in industrial settings where the early detection and repair of defects is paramount for ensuring industrial safety. During the enhanced magnetic memory detection of micro-defects, many interference signals appear in the detection signal, which makes it difficult to accurately extract the characteristics of the micro-defect signals, significantly affecting detection effectiveness. When improved complete ensemble empirical mode decomposition with adaptive noise (ICEEMDAN) is employed independently for signal denoising, the noise and feature signals of the transition components are retained or removed. When variational mode decomposition (VMD) is employed independently for signal denoising, the denoising effect is restricted because of the difficulty in determining the penalty factor α and the number of decomposition layers m. To solve these problems, a denoising method for enhanced magnetic memory detection signals based on ICEEMDAN and VMD, called ICEEMDAN–VMD, is proposed in this paper. First, a comprehensive index (CI) combining information entropy (IE) and the correlation coefficient R is proposed, then the signal components obtained by performing decomposition with the ICEEMDAN method are divided into noise-dominant components, transition components, and useful signal components based on the CI. Subsequently, VMD is employed to perform secondary decomposition on the transition components obtained from the ICEEMDAN method and calculate the correlation coefficients. Ultimately, the optimal VMD components and useful signal components obtained by the ICEEMDAN method are selected for signal reconstruction to obtain a denoised signal. To validate the effectiveness of the proposed method, the denoising effects of the ICEEMDAN–VMD, ICEEMDAN, and VMD methods were compared based on the signal-to-noise ratio (SNR) and fuzzy entropy (FE). The comparison indicated that the ICEEMDAN–VMD denoising method significantly enhanced the denoising effect, and the SNRs of the components of the magnetic field signal could be increased by up to 69.426%. The SNR of each gradient component of the magnetic field signal could be improved by up to ten times, and the FEs of the signal components and their corresponding gradient components could be reduced by 24.198%–81.011%, respectively.

Original lidar return signals are covered by high levels of noise that seriously affect the accuracy of subsequent data processing and inversion. Therefore, it is important to separate the effective signal from the returned signal with noise interference. In this paper, an efficient denoising method based on the variational mode decomposition (VMD) algorithm optimized using the global search strategy-based whale algorithm and the total variational stationary wavelet transform (GSWOA-VMD-SWTTV) is proposed, and this method is applied to denoising of lidar return signals. First, the global search strategy-based whale optimization algorithm (GSWOA) is used to acquire the optimal parameters of the VMD algorithm adaptively, and the lidar return signal is then decomposed by global search strategy-based whale optimization algorithm (GSWOA)-VMD. The effective modal components are then determined using the cross-correlation coefficient method from the decomposed modal components, and total variation stationary wavelet denoising is performed on each effective mode. Finally, the effective modes are reconstructed to obtain a clean lidar return signal. Moreover, to provide further verification of the effectiveness of the proposed method, it is compared with the ensemble empirical mode decomposition (EEMD) method, the complete EEMD with adaptive noise (CEEMDAN) method, the singular value decomposition (SVD) method, and the wavelet threshold method under sunny, cloudy, and dusty weather conditions. The experimental results demonstrate the superior noise reduction performance of the proposed algorithm, which can filter out strong noise from the signal while retaining the complete signal details without distortion; additionally, the proposed method has the highest signal-to-noise ratio and lowest mean square error.

In this paper, we propose a novel ECG signal enhancement method based on Complete Ensemble Empirical Mode Decomposition with Adaptive Noise (CEEMDAN) and Higher Order Statistics (HOS). In our scheme, the noisy ECG signal is first decomposed adaptively into oscillatory components called intrinsic mode functions (IMFs) by using Empirical Mode Decomposition (EMD) or its variants. Therefore, the obtained modes are separated into two groups of noisy signal modes and one group of useful signal modes, by using a novel criterion derived from the HOS namely the fourth order cumulant or kurtosis. After that, a modified shrinkage scheme based on Interval Thresholding technique is adaptively applied to each selected IMF from the noise-dominant groups in order to reduce the noise and to preserve the QRS complex. The overall filtered ECG signal is then reconstructed by combining the thresholded IMFs and the retained unprocessed lower frequency relevant IMFs. Various tests and simulations are investigated to evaluate the performance of our proposed approach in combination with the EMD, Ensemble EMD (EEMD) and CEEMDAN algorithms. The simulation results carried on MIT-BIH Arrhythmia database, show that CEEMDAN method gives better performance than the two other methods, and outperforms some state-of-the-art methods in terms of Signal to Noise Ratio (SNR) and Root Mean Square Error (RMSE).