Feature Extraction Performance to Differentiate Spinal Curvature Types using Gray Level Co-occurrence Matrix Algorithm

The gray level co-occurrence matrix (GLCM) algorithm is a contemporary computational biology method which, today, is frequently used to detect small changes in texture that are not visible using conventional techniques. We demonstrate that the toxic compound 6-hydroxydopamine (6-OHDA) and iron oxide nanoparticles (IONPS) have opposite effects on GLCM features of cell nuclei. Saccharomyces cerevisiae yeast cells were treated with 6-OHDA and IONPs, and imaging with GLCM analysis was performed at three different time points: 30 min, 60 min, and 120 min after the treatment. A total of 200 cell nuclei were analyzed, and for each nucleus, 5 GLCM parameters were calculated: Angular second moment (ASM), Inverse difference moment (IDM), Contrast (CON), Correlation (COR) and Sum Variance (SVAR). Exposure to IONPs was associated with the increase of ASM and IDM while the values of SVAR and COR were reduced. Treatment with 6-OHDA was associated with the increase of SVAR and CON, while the values of nuclear ASM and IDM were reduced. This is the first study to indicate that IONPs and 6-OHDA have opposite effects on nuclear texture. Also, to the best of our knowledge, this is the first study to apply the GLCM algorithm in Saccharomyces cerevisiae yeast cells in this experimental setting.

Abstract: Pomegranate is a valuable fruit crop that is widely cultivated in various regions. However, its production is often threatened by various diseases that can significantly affect its yield and quality. In this project, we propose a method for pomegranate disease detection and pesticides suggestion using the gray-level co-occurrence matrix (GLCM) algorithm. The proposed approach utilizes GLCM to extract texture features from the pomegranate leaf images and classify them into healthy or diseased categories. Moreover, we suggest the most effective pesticides to control the detected diseases by using the GLCM algorithm. The performance of the proposed method is evaluated using a dataset of pomegranate leaf images with different disease symptoms. The experimental results demonstrate the effectiveness of our approach in detecting and classifying pomegranate diseases with high accuracy. Furthermore, the suggested pesticides show promising results in controlling the diseases. Overall, the proposed method can assist farmers in identifying pomegranate diseases at an early stage and provide appropriate suggestions for pesticide selection, which can reduce crop losses and enhance crop productivity. Keywords: classification, disease detection, GLCM algorithm.

QR image feature extraction effectiveness based on metrics using spectral clustering and grey level Co-Occurrence matrix algorithm

Texture refers to the tactile impression, such as rough, silky, bumpy, and other texture terms. The Grey-Level Co-occurrence Matrix (GLCM) algorithm is widely used in visual images for texture feature extraction, image structure characterization analysis and texture classification. The GLCM can not only give the statistics of pixel gray values occur in an image, but also give multiple characteristics of the images. Since the primate brain, which is constructed with spiking neurons, has excellent performance in terms of image feature extraction, the improved GLCM algorithm is used to train a spiking neural network and also to simulate the brain's ability about extract key information and utilize these extracted feature information to classify different texture image. Experimental results in this article show that this combination of the GLCM and spiking neural network can effectively extract image features, and the texture classification results is also to achieve satisfactory effect.

Data security by using an alphanumeric combination password is no longer used, so it needs to be added security that is difficult to be manipulated by certain people. One type of security is the type of biometrics technology using face recognition which has different characteristics by combining the Viola-Jones algorithm to detect facial features, GLCM (Gray Level Co-occurrence Matrix) for extracting the texture characteristics of an image, and Cosine Similarity for the measurement of the proximity of the data (image matching). The image will be detected using the Viola-Jones algorithm to get face, eyes, nose, and mouth. The image detection results will be calculated the value of the texture characteristics with the GLCM (Gray Level Cooccurrence Matrix) algorithm. Image matching using cosine similarity will determine or match the data stored in the database with new image input until identification results are obtained. The results obtained in this study get the level of accuracy of the identification of the three algorithms by 77.20% with the amount of data that was correctly identified as many as 386 out of 500 images.Keywords: Security, face recognition, Viola-Jones, Cosine Similarity.

Optical image provides a unique spectral and textural opportunity to acquire data free of charge in cloud-free weather conditions. However, textural information from recent Sentinel-2A data has not been sufficiently recognized. Several researches have shown that texture features are essential for extracting crop information. This study presents a new scheme that integrates spectral bands and textural features for mapping maize fields and other land cover types (i.e., build-up, trees, others, and water) and evaluates the effectiveness of random forest (RF) and support vector machine (SVM) classifiers with different kernel functions based on Sentinel 2A (S-2A) data. The textural features were derived from multiple bands of S-2A image using a grey-level co-occurrence matrix (GLCM) algorithm. To normalize the analysis of these features, Random Forest feature selection was employed. The outcomes show that S-2A images are appropriate for mapping maize fields and other land covers when the image is accessible during the growing season. The SVM classifier with a radial basis function (RBF) kernel is superior to a polynomial (P), linear (L), and sigmoid (S) kernel functions, and the RF classifiers. For the SVM_RBF, the highest overall accuracy was obtained from the integration of spectral bands and textural features at scenario 2 SVM_RBF (87.40%), followed by the combination of spectral and textural features at scenario 2 SVM_P kernel (86.56%). However, scenario 5 SVM_P kernel (85.54%), scenario 4 SVM_P kernel function (85.30%), the spectral features alone, and the SVM_P kernel function, have the highest O/A (83.90%) than that of the SVM_RBF (83.66%). The inclusion of textural features contributed significantly in mapping the smallholder’s maize field in the study area. This demonstrated the value of S-2A in agricultural research.

Alzheimer’s disease (AD) is a neurological, irreversible disorder of the brain that reduces the cognitive skills and memory ability. Alzheimer’s Disease should be diagnosed in initial phase for providing efficacious treatment to the patient. Delay in treatment may lead to the demise of patient. This paper presents a new technique for feature extraction in Alzheimer’s Disease classification. Dual Tree complex wavelet transform is applied to decompose the image into six sub images. Subsequently, Gray Level Co-occurrence Matrix is calculated from six sub images. From these matrices 22 statistical features are obtained for each sub-band image. Further, Genetic Algorithm is used to obtain the relevant and optimum features to improve the classification accuracy. Dual Tree Complex Wavelet Transform shows high directional selectivity, so it can decompose the image from six different directions and provide additional informative features. In addition, Gray Level Co¬occurrence Matrix deals with the image intensity directly, so it provides the information related with the patterns which are mutually occurring. Genetic Algorithm requires less information and provides more solutions, so it extracts optimum features and improves classification accuracy. The proposed method obtained 96.2% accuracy, 96.4% sensitivity and 95.9% specificity. The performance of the proposed work surpasses the existing traditional approaches for AD detection.

Label-free and rapid classification of cells can have awide range of applications in biology. We report a robust method of polarization diffraction imaging flow cytometry (p-DIFC) for achieving this goal. Coherently scattered light signals are acquired from single cells excited by a polarized laser beam in the form of two cross-polarized diffraction images. Image texture and intensity parameters are extracted with a gray level co-occurrence matrix (GLCM) algorithm to obtain an optimized set of feature parameters as the morphological "fingerprints" for automated cell classification. We selected the Jurkat T cells and Ramos B cells to test the p-DIFC method's capacity for cell classification. After detailed statistical analysis, we found that the optimized feature vectors yield accuracies of classification between the Jurkat and Ramos ranging from 97.8% to 100% among different cell data sets. Confocal imaging and three-dimensional reconstruction were applied to gain insights on the ability of p-DIFC method for classifying the two cell lines of highly similar morphology. Based on these results we conclude that the p-DIFC method has the capacity to discriminate cells of high similarity in their morphology with "fingerprints" features extracted from the diffraction images, which may be attributed to subtle but statistically significant differences in the nucleus-to-cell volume ratio in the case of Jurkat and Ramos cells.

Experimental analysis on relationship between roughness parameters and texture features of 6082T6 sandblasted components

The arrangement of plant cortical microtubules can reflect the physiological state of cells. However, little attention has been paid to the image quantitative analysis of plant cortical microtubules so far. In this paper, Bidimensional Empirical Mode Decomposition (BEMD) algorithm was applied in the image preprocessing of the original microtubule image. And then Intrinsic Mode Function 1 (IMF1) image obtained by decomposition was selected to do the texture analysis based on Grey-Level Cooccurrence Matrix (GLCM) algorithm. Meanwhile, in order to further verify its reliability, the proposed texture analysis method was utilized to distinguish different images of Arabidopsis microtubules. The results showed that the effect of BEMD algorithm on edge preserving accompanied with noise reduction was positive, and the geometrical characteristic of the texture was obvious. Four texture parameters extracted by GLCM perfectly reflected the different arrangements between the two images of cortical microtubules. In summary, the results indicate that this method is feasible and effective for the image quantitative analysis of plant cortical microtubules. It not only provides a new quantitative approach for the comprehensive study of the role played by microtubules in cell life activities but also supplies references for other similar studies.

Retrospective Analysis of Cytopathology using Gray Level Co-occurrence Matrix Algorithm for Thyroid Malignant Nodules in the Ultrasound Imaging

The sooner the patient receives a diagnosis for their condition, the higher their chances will be of surviving it. As is the case with conventional diagnosis, medical imaging is analyzed by trained professionals who look for any signs that the body may be displaying cancerous tendencies. The great quality and multidimensionality of MRI images need the use of an appropriate diagnostic system in addition to CAD tools. Because it is useful, researchers are now concentrating their efforts on developing methods to improve the accuracy, specificity, and speed of these systems. A model that is efficient in terms of image processing, feature extraction, and machine learning is presented in this study. This chapter presents machine learning techniques for prostate cancer detection by analyzing MRI images. Image preprocessing is done using histogram equalization. It improves image quality. Image segmentation is performed using the fuzzy C means algorithm. Features are extracted using the gray level co-occurrence matrix algorithm. Classification is performed using the KNN.

Problem statement: Recently, there has been a huge progress in collection of varied image databases in the form of digital. Most of the users found it difficult to search and retrieve required images in large collections. In order to provide an effective and efficient search engine tool, the system has been implemented. In image retrieval system, there is no methodologies have been considered directly to retrieve the images from databases. Instead of that, various visual features that have been considered indirect to retrieve the images from databases. In this system, one of the visual features such as texture that has been considered indirectly into images to extract the feature of the image. That featured images only have been considered for the retrieval process in order to retrieve exact desired images from the databases. Approach: The aim of this study is to construct an efficient image retrieval tool namely, “Content Based Medical Image Retrieval with Texture Content using Gray Level Co-occurrence Matrix (GLCM) and k-Means Clustering algorithms”. This image retrieval tool is capable of retrieving images based on the texture feature of the image and it takes into account the Pre-processing, feature extraction, Classification and retrieval steps in order to construct an efficient retrieval tool. The main feature of this tool is used of GLCM of the extracting texture pattern of the image and k-means clustering algorithm for image classification in order to improve retrieval efficiency. The proposed image retrieval system consists of three stages i.e., segmentation, texture feature extraction and clustering process. In the segmentation process, preprocessing step to segment the image into blocks is carried out. A reduction in an image region to be processed is carried out in the texture feature extraction process and finally, the extracted image is clustered using the k-means algorithm. The proposed system is employed for domain specific based search engine for medical Images such as CT-Scan, MRI-Scan and X-Ray. Results: For retrieval efficiency calculation, conventional measures namely precision and recall were calculated using 1000 real time medical images (100 in each category) from the MATLAB Workspace database. For selected query images from the MATLAB-Image Processing tool Box-Workspace Database, the proposed tool was tested and the precision and recall results were presented. The result indicates that the tool gives better performance in terms of percentage for all the 1000 real time medical images from which the scalable performance of the system has been proved. Conclusion: This study proposed a model for the Content Based Medical Image Retrieval System by using texture feature in calculating the Gray Level Co Occurrence matrix (GLCM) from which various statistical measures were computed in order to increasing similarities between query image and database images for improving the retrieval performance along with the large scalability of the databases.

Detection of ischemic stroke using brain magnetic resonance imaging (MRI) images is vital and a challenging task in clinical practice. We propose a novel method based on optimization technique to identify stroke lesion in diffusion-weighted imaging (DWI) MRI sequences of the brain. The algorithm was tested in a specific slice having large area of stroke region from a series of 292 real-time images obtained from different stroke affected subjects from IMS and SUM Hospital. The proposed method consists of pre-processing, segmentation, extraction of important features and classification of stroke type. The particle swarm optimization (PSO) and Darwinian particle swarm optimization (DPSO) algorithms were applied in segmenting the stroke lesions. The important features were extracted with the gray-level co-occurrence matrix (GLCM) algorithm and in decision making process, the feature set is classified into three types of stroke according to The Oxfordshire Community Stroke Project (OCSP) classification using support vector machine (SVM) classifier. The lesion area was segmented effectively with DPSO process with classification weighted accuracy of 90.23%, which is higher than PSO method having weighted accuracy of 85.19%. Similarly, the values of different measured parameters were high in DPSO technique, the computational time was also higher in DPSO method for segmenting the stroke lesions. These results confirm that the DPSO-based approach with SVM classifier is an effective way to identify the decision making process of ischemic stroke lesion in MRI images of the brain.

Rapid and nondestructive identification of rice storage year using hyperspectral technology