Feature Selection Using Parallel Genetic Algorithm for the Prediction of Geometric Mean Diameter of Soil Aggregates by Machine Learning Methods

Near infrared spectroscopy was used in discrimination of intact bovine teeth in terms of animal sex, diet, tooth type and place of origin. Discriminant Analysis (DA) models were developed and tested using a stratified random 70:30 data split to calibration and test sets. Of the discriminant techniques of Soft Independent Modelling of Class Analogy (SIMCA), Partial Least Squares – DA, Artificial Neural Networks (ANN) and Support Vector Machine (SVM), SVM and PLS-DA models performed best in most instances, with pretreatment choice impacting technique success. For test set prediction of animal sex, an accuracy of 95% was achieved using a PLS-DA model, and similar performance achieved using a SVM model. SVM, ANN and SIMCA models predicted three categories of tooth type (deciduous, permanent unerupted and erupted) with similar accuracies (89, 79 and 82%, respectively), however, permanent unerupted teeth were conflated with permanent erupted teeth. Prediction accuracy for ANN, SVM and PLS-DA models were also similar for discrimination of teeth from animals on a grain versus grass diet (PLS-DA 82%). There was considerable variation between models in prediction of geographic origin. Of the seven locations, two were discriminated with true positive rate around 70% using SVM and ANN models. Potential applications of this technology are discussed.

Purpose – This paper aims to predict the needle penetration force (NPF) in denim fabrics using the artificial neural network (ANN) and multiple linear regression (MLR) models based on the effects of various sewing parameters. Design/methodology/approach – In order to design the ANN and MLR models, four parameters including fabric weight, number of fabric layers, weave pattern, and sewing needle size are taken into account as the input parameters and NPF as the output parameter. According to these parameters, 140 samples of data were resulted. Each sample was tested five times. From these 140 data (input-output data pairs), 112 were used for training the ANN and MLR models and 28 samples were used to test the performance of ANN and MLR. Also, the NPF was measured on the Instron tensile tester to simulate sewing process. Findings – The results indicated that the NPF in denim fabrics can be well predicted in terms of sewing parameters by using ANN and MLR models, in which the ANN model exhibits greater performance than MLR (RANN=0.989> RMLR=0.901). Research limitations/implications – The NPF measurement method is limited at low speed. Originality/value – Using the ANN model for forecasting NPF in denim fabrics can help the garment manufactures to produce high-quality denim products and improve the sewing process through reducing seam damage. The NPF could be also measured in the cycle loading conditions similar to sewing machine process by using a special designed tools mounted on the Instron tensile tester.

The paper explores the hybrid of SVM and system of Artificial Neural Network as the finest binary classification system for calculating the diabetic nature of people in comparison to Support Vector Machine (SVM). In this research, the sets of all the parameters describing the diabetic nature of a person are taken from the laboratories. This approach is chosen so that a better learning method can be used for various problems. The testing results were found to be in accordance with the accepted results that resemble with the direct diagnosis of a physician. The results of this research shows that this hybrid SVM and Artificial Neural Network (ANN) model is more precise than the SVM model. These results of the hybrid SVM and ANN model suggest that it is very effective for the classification of Diabetic and Non Diabetic nature of a person. This paper highlights the concept of Support Vector Machines and its integration with Artificial Neural Network, the two key characteristics with one being the generalization theory of the SVM model that best describes how to select a hypothesis and functions given by Kernel that introduces the idea of non-linearity without the inclusion of the actual algorithm.

Air pollution in Macau has become a serious problem following the Pearl River Delta’s (PRD) rapid industrialization that began in the 1990s. With this in mind, Macau needs an air quality forecast system that accurately predicts pollutant concentration during the occurrence of pollution episodes to warn the public ahead of time. Five different state-of-the-art machine learning (ML) algorithms were applied to create predictive models to forecast PM2.5, PM10, and CO concentrations for the next 24 and 48 h, which included artificial neural networks (ANN), random forest (RF), extreme gradient boosting (XGBoost), support vector machine (SVM), and multiple linear regression (MLR), to determine the best ML algorithms for the respective pollutants and time scale. The diurnal measurements of air quality data in Macau from 2016 to 2021 were obtained for this work. The 2020 and 2021 datasets were used for model testing, while the four-year data before 2020 and 2021 were used to build and train the ML models. Results show that the ANN, RF, XGBoost, SVM, and MLR models were able to provide good performance in building up a 24-h forecast with a higher coefficient of determination (R2) and lower root mean square error (RMSE), mean absolute error (MAE), and biases (BIAS). Meanwhile, all the ML models in the 48-h forecasting performance were satisfactory enough to be accepted as a two-day continuous forecast even if the R2 value was lower than the 24-h forecast. The 48-h forecasting model could be further improved by proper feature selection based on the 24-h dataset, using the Shapley Additive Explanations (SHAP) value test and the adjusted R2 value of the 48-h forecasting model. In conclusion, the above five ML algorithms were able to successfully forecast the 24 and 48 h of pollutant concentration in Macau, with the RF and SVM models performing the best in the prediction of PM2.5 and PM10, and CO in both 24 and 48-h forecasts.

Flooding causes several threats with outcomes which include peril to human and animal life, damage to property, and adversity to agricultural fields. Therefore, flood prediction is of prime importance for reducing loss of life and devastation to property. To model complex nature of hydrologic processes artificial neural network (ANN) tool is effectively being utilized for modelling different nonlinear relationships, and has proved to be an appropriate method for flood prediction. Present study investigated relative accuracy of radial basis function neural network (RBFNN) and support vector machine (SVM) models combined with Firefly Algorithm (FA) in predicting river flood discharge and contrasted with that of regular ANN, RBFNN and SVM models. Monthly river flow data of Silchar and Dholai stations located in Cachar district of Assam, India are utilized for the present study. For assessing model performance, coefficient of determination (R2), mean square error (MSE) and root mean square error (RMSE) were measured. Evaluation of outcomes shows that both RBF-FA (radial basis function - firefly algorithm) and SVM-FA (support vector machine - firefly algorithm) hybrid models give more precise forecasting results than RBFNN, FFBPNN (feed forward back propagation neural network) and SVM models. Yet, it can be observed that SVM-FA model give better forecasting outputs with R2 value 0.9818 than RBF-FA model. Results also reveal that simple SVM model performs marginally better than simple ANN model.

Estimating olive (Olea europaea L.) leaf area is an important aspect of monitoring plant health and evaluating growth processes in agriculture. Accurate estimation of leaf area allows for a better understanding of processes such as water and nutrient utilization, photosynthesis efficiency, respiration, and yield potential. This study aims to determine the most accurate, easy, and reliable leaf area estimation model using the geometric properties (length and width) of olive leaves. Additionally, the predictive performances of multiple linear regression (MLR) and artificial neural network (ANN) were compared. A total of 1320 leaf samples collected from 22 olive cultivars were used in the study. Leaf length and width were taken as input parameters, and both MLR and ANN models were developed for each cultivar. Both multiple linear regression (MLR) and artificial neural network (ANN) models demonstrated high predictive accuracy for olive leaf area estimation across 22 cultivars. The MLR models explained up to 96% of the variation in leaf area using leaf length (LL) and leaf width (LW), with low root mean square errors, indicating strong reliability. When cultivar identity was modeled as a categorical factor through dummy encoding, the model captured significant cultivar-specific effects without altering the overall predictive performance. The ANN models achieved slightly higher accuracy, with determination coefficients exceeding 0.99 and minimal prediction errors, confirming their superior ability to model nonlinear relationships. Across both approaches, leaf width contributed more strongly to leaf area than leaf length. Cultivar-specific differences were statistically significant for only a few genotypes, while most cultivars exhibited comparable patterns after adjustment for multiple testing. In conclusion, both MLR and ANN models demonstrated high accuracy in predicting olive leaf area, with ANN models showing slightly superior performance. However, MLR models also yielded highly reliable results, indicating that both approaches are viable for practical applications in olive cultivation. These predictive models can be effectively used for rapid, non-destructive phenotyping, growth monitoring, and precision management in olive breeding and production systems.

A machine learning approach for early warning of cyanobacterial bloom outbreaks in a freshwater reservoir

Soil organic carbon (SOC) dataset augmentation, which enables the comprehensive monitoring of carbon sinks at regional and global scales, is vital for global carbon cycle management and soil fertility. SOC maps built by conventional laboratory or field measurements are time- and cost-consuming and especially difficult in forests. A new approach to build SOC maps with good accuracy and time efficiency and promptly respond to changes in SOC dynamics is, therefore, being identified. This study aimed to evaluate the ability of SOC estimation using a multiple linear regression model (MLR) and four machine learning algorithms: artificial neural networks (ANN), support vector machine (SVM), random forest (RF), and extreme gradient boosting (XGBoost) with satellite data sources and soil nutrient indicator data to find the optimal method. The results indicate that the SVM and XGBoost models demonstrated the best predictive abilities (R2 = 0.70 and 0.74, %RMSE = 8.8 and 8.3, MAE = 0.176 and 0.155) when using remote sensing variables and soil property variables, respectively. Band7_IDM, Band 5, Band4_IDM, RVI, NSMI, NDVI, Band 6, Band 7, and Band 4 were the most valuable variables in the SVM model, while NDVI, DVI, GVMI, NSMI, and Band4_Dive in the XGBoost model. The SVM model using remote sensing data may be applied to build SOC maps in Vietnamese forests instead of using conventional methods with a high accuracy (R2 = 0.74).

Wellbore instability is one of the most critical challenges during drilling, often manifested as wellbore collapse, shrinkage, falling rocks, and formation fracturing, which may result in complex problems such as pipe sticking, high torque, mud loss, thus impeding the drilling progress and increasing the cost of the drilling operation. Conventional wellbore stability prediction relies on some deterministic physical models, involving some empirical coefficients which are difficult to determine and often dependent on field experience. In addition, some complex factors, such as natural fractures, cannot be explicitly and quantitatively characterized in existing wellbore stability prediction models. Artificial intelligence technique has shown unique advantages in nonlinear issues. The artificial intelligence technique is used to predict wellbore stability in this study, including artificial neural networks (ANNs) and support vector machine (SVM). The logging data and drilling data were collected from the field. According to the correlation analysis between influencing factors and wellbore enlargement rate, 16 parameters were extracted, such as mud density, formation density porosity, acoustic interval transit time, weight on bit as the input data of the models, and wellbore enlargement rate as output. Both SVM and ANNs models have exceptional performance in predicting wellbore stability. When the kernel of the SVM model is Linear, predictions perform optimally. In the ANNs model prediction results, the result performs optimally when the total number of neurons is 1024 in the hidden layer. Overall, ANNs model performs better than SVM model with a coefficient of determination (R2) of 0.991, therefore it is recommended to apply ANNs to predict wellbore stability. The present analysis supplies knowledge that can be used to predict wellbore stability problems before drilling, optimize drilling parameters, and reduce drilling accidents and costs. INTRODUCTION Wellbore instability refer to a series of responses resulting from mechanical, chemical and other effects of the rock around the wellbore. Wellbore instability is one of the most critical challenges during drilling, often manifested as wellbore collapse, shrinkage, falling rocks, and formation fracturing, which may result in complex problems such as pipe sticking, high torque, mud loss, thus impeding the drilling progress and increasing the cost of the drilling operation.

GIS-based mineral prospectivity mapping using machine learning methods: A case study from Tongling ore district, eastern China

Major League Baseball (MLB) is the highest level of professional baseball in the world and accounts for some of the most popular international sporting events. Many scholars have conducted research on predicting the outcome of MLB matches. The accuracy in predicting the results of baseball games is low. Therefore, deep learning and machine learning methods were used to build models for predicting the outcomes (win/loss) of MLB matches and investigate the differences between the models in terms of their performance. The match data of 30 teams during the 2019 MLB season with only the starting pitcher or with all pitchers in the pitcher category were collected to compare the prediction accuracy. A one-dimensional convolutional neural network (1DCNN), a traditional machine learning artificial neural network (ANN), and a support vector machine (SVM) were used to predict match outcomes with fivefold cross-validation to evaluate model performance. The highest prediction accuracies were 93.4%, 93.91%, and 93.90% with the 1DCNN, ANN, SVM models, respectively, before feature selection; after feature selection, the highest accuracies obtained were 94.18% and 94.16% with the ANN and SVM models, respectively. The prediction results obtained with the three models were similar, and the prediction accuracies were much higher than those obtained in related studies. Moreover, a 1DCNN was used for the first time for predicting the outcome of MLB matches, and it achieved a prediction accuracy similar to that achieved by machine learning methods.

Estimating wet soil aggregate stability from easily available properties in a highly mountainous watershed

This study was undertaken with the primary objective of modeling grain velocity based on experimental data obtained under the controlled conditions of a laboratory using a rectangular hydraulic tilting channel. Soft computing approaches, i.e., support vector machine (SVM), artificial neural network (ANN), and multiple linear regression (MLR), were applied to simulate grain velocity using four input variables; shear velocity, exposed area to base area ratio (EATBAR), relative depth, and sediment particle weight. Quantitative performance evaluation of predicted values was performed with the help of three different standard statistical indices, such as the root mean square error (RMSE), Pearson’s correlation coefficient (PCC), and Wilmot index (WI). The results during the testing phase revealed that the SVM model has RMSE (m/s), PCC, and WI values obtained as 0.1195, 0.8877, and 0.7243, respectively, providing more accurate predictions than the MLR and ANN models during the testing phase.

In recent years, the application of machine learning methods has become increasingly common in atmospheric science, particularly in modeling and predicting processes that impact air quality. This study focuses on predicting hydrogen production from solid oxide electrolytic cells (SOECs), a technology with significant potential for reducing greenhouse gas emissions and improving air quality. We developed two models using artificial neural networks (ANNs) and support vector machine (SVM) to predict hydrogen production. The input variables are current, voltage, communication delay time, and real-time measured hydrogen production, while the output variable is hydrogen production at the next sampling time. Both models address the critical issue of production hysteresis. Using 50 h of SOEC system data, we evaluated the effectiveness of the ANN and SVM methods, incorporating hydrogen production time as an input variable. The results show that the ANN model is superior to the SVM model in terms of hydrogen production prediction performance. Specifically, the ANN model shows strong predictive performance at a communication delay time ε = 0.01–0.02 h, with RMSE = 2.59 × 10−2, MAPE = 33.34 × 10−2%, MAE = 1.70 × 10−2 Nm3/h, and R2 = 99.76 × 10−2. At delay time ε = 0.03 h, the ANN model yields RMSE = 2.74 × 10−2 Nm3/h, MAPE = 34.43 × 10−2%, MAE = 1.73 × 10−2 Nm3/h, and R2 = 99.73 × 10−2. Using the SVM model, the prediction error values at delay time ε = 0.01–0.02 h are RMSE = 2.70 × 10−2 Nm3/h, MAPE = 44.01 × 10−2%, MAE = 2.24 × 10−2 Nm3/h, and R2 = 99.74 × 10−2, while at delay time ε = 0.03 h they become RMSE = 2.67 × 10−2 Nm3/h, MAPE = 43.44 × 10−2%, MAE = 2.11 × 10−2 Nm3/h, and R2 = 99.75 × 10−2. With this precision, the ANN model for SOEC hydrogen production prediction has positive implications for air pollution control strategies and the development of cleaner energy technologies, contributing to overall improvements in air quality and the reduction of atmospheric pollutants.

Chatter remains a critical limitation in milling operations, impairing surface integrity, reducing tool life, and limiting productivity. Accurate real-time prediction of chatter is essential for achieving process stability and enhancing machining efficiency. This paper provides a comparative evaluation of Support Vector Machines (SVM) and Artificial Neural Networks (ANN) combined with Variational Mode Decomposition (VMD) for the accurate identification of chatter in real-time vibration data. The milling vibration signals are decomposed into an Intrinsic Mode Functions (IMFs) with VMD to obtain chatter sensitive features. Axial depth of cut, table feed and Spindle speed data combined with these characteristics are used as input to both ANN and SVM models. The ANN model uses Tangent Sigmoid (TANSIG) activation function and six training algorithms, out of which Levenberg-Marquardt (LM) is found to produce the best results. Experimental verification proved that the prediction accuracy of 91.44% was outstripped (over 87.21%) in terms of the SVM model by the ANN model. The robustness of this framework in detecting stable, transitional, and unstable cutting zones has also been demonstrated through Stability Lobe Diagrams (SLDs) analysis. The proposed VMD-ANN approach offers an accurate and efficient solution to chatter prediction and parameter optimisation in real-time, which further contributes to higher material removal rates, better surface quality, and a longer tool life for smart manufacturing applications.