Fuzzy Ant Colony Optimization Based Energy Efficient Routing For Mixed Wireless Sensor Network

Wireless sensor networks congestion occurs easily due to its centralized traffic pattern. Normally, mono-sync wireless sensor network experiences multiple traffic flow congestion in the dense environment of the network, which leads to excess energy consumption and severe packet loss. To overcome these issues, a congestion detection and alleviation mechanism using cluster based heuristic optimized hierarchical routing protocol is proposed in this paper. Here, congestion detection and alleviation utilize the features of sensor nodes. The congestion is categorized into two types: (i) node level congestion and (ii) link level congestion. The node level congestion is detected by assessing the buffer utilization and the interval amid the consecutive data packets. The link level congestion is considered with computing link usage utilizing back-off step of round robin carrier sense multi-access with collision avoidance. Congestion detection and alleviation reactively affected node/link through cuckoo hosted rider search multi-hop routing algorithm. It has two phases: the cluster head selection and multi-path routing. Cluster head selection is performed through Taylor multiple random forest kernel fuzzy C-means clustering algorithm and multi-path routing is performed through cuckoo hosted rider search multi-hop routing algorithm. The simulation of the proposed method is done in network simulator tool. Here, the performance metrics, like packet delivery ratio, delay, energy consumption, packet drop, overhead, network lifetime and throughput are calculated. The experimental outcomes of the proposed technique shows 11.6%, 18.4% and 28.1% lower delay, 78.2%, 65.4% and 52.6% higher packet delivery ratio, and 29.2%, 37.4% and 40.8% lower packet drop compared with the existing methods, like congestion detection and alleviation using multi-attribute decision-making in optimization-based hybrid congestion alleviation routing protocol in wireless sensor networks, congestion detection and alleviation using hybrid K-means with greedy best first search algorithms in packet rate reduction utilizing adaptive weight firefly algorithm ant colony optimization based routing protocol in wireless sensor networks and congestion detection and alleviation using multi-input time on task optimization algorithm for altered gravitational search algorithm routing protocol in wireless sensor networks.

The existing routing protocols for wireless sensor networks were not reasonable in design, which limited their application. Most of the existing studies did not take into account the energy consumption of the network and the balanced use of the energy of sensor nodes, which led to the unsatisfactory application effect of wireless sensor networks in some fields. Therefore, from the perspective of energy balance in wireless sensor networks, this paper proposed a construction method of an energy balance routing protocol in wireless sensor networks based on a fuzzy control strategy. Firstly, based on the analysis of the basic composition of wireless sensor networks and the structure of sensor nodes, this paper expounded the basic process of wireless data transmission and summarized the classification and characteristics of routing protocols in wireless sensor networks from different angles. Secondly, according to the node data transmission characteristics of wireless sensor networks, the energy balance use model of sensor nodes was established, and the design method of the energy balance routing protocol based on fuzzy control strategy was proposed, and the data transmission link was optimized. Finally, through experimental comparative analysis, the results showed that the energy balanced routing protocol proposed in this paper can effectively realize the energy balanced use of the network data transmission process. Compared with other common routing protocols, the wireless sensor network routing protocol proposed in this paper can not only improve the data transmission efficiency and reduce the data redundancy but also save energy consumption and prolong the network running time. The design method of routing protocol proposed in this paper will be conducive to the optimization and application of routing protocol in wireless sensor networks and provide a theoretical basis for the related research of wireless sensor networks.

One of the most important topics in the field of wireless sensor networks is the development of approaches to improve network lifetime. In this paper, an energy-efficient control and routing protocol for wireless sensor networks is presented. This algorithm is based on reinforcement learning for energy management in the network. This protocol seeks to optimize routing policies to maximize the long-term reward received by each node, using reinforcement learning, which is a machine learning approach. In order to improve the lifetime of wireless sensor network, three energy management approaches have been proposed. The first approach is to navigate correctly using reinforcement learning to reduce the length of the routes and to improve energy consumption. The second approach is to exploit a sleep scheduling technique to improve node energy consumption. The last approach is used to restrict data transmission of each node based on the received data change rate. Simulation results show that in terms of network lifespan, the proposed method significantly outperforms previous reported methods.

QoSNET: An integrated QoS network for routing protocols in large scale wireless sensor networks

Introduction: Routing protocols in Wireless Sensor Networks (WSN) are of major concern because of the important factors like energy efficiency and reliability. Opportunistic Routing (OR) is the simplest and reliable routing technique for ad-hoc networks and WSN. The OR protocol guarantees data delivery in the network. As WSN need energy-efficient routing, therefore, energy- efficient OR protocols gained popularity in the last three years. Objectives: Opportunistic routing improves the performance of the network by utilizing the broadcasting abilities of wireless channels. In this paper, a new energy-efficient and reliable routing protocol has been proposed that is based on the opportunistic routing technique. Methods: The proposed protocol is based on the energy-efficient routing metric. The proposed OR protocol prioritizes among the candidate forwarders on the basis of energy-efficient routing metric and this will lead to the achievement of improved network lifetime. Results: The end-to-end delay is reduced because of the selection of candidate forwarders from the neighbor list of each node. The proposed protocol uses selective acknowledgment mechanisms. The simulation results of the proposed protocol depict the improved performance as compared to other recent OR protocols. Conclusion: The proposed protocol can directly be used with existing WSN applications. Further improvements can be made by utilizing more parameters like distance and the quality of transmission.

Sensor networks are one of the fastest growing areas in broad wireless ad hoc networking field. A sensor node, typically, contains signal-processing circuits, micro-controllers and a wireless transmitter/receiver antenna. Energy saving is one of the critical issue for sensor networks since most sensors are equipped with non-rechargeable batteries that have limited lifetime. Routing schemes are used to transfer data collected by sensor nodes to base stations. In the literature many routing protocols for wireless sensor networks are suggested. In this work, four routing protocols for wireless sensor networks viz. flooding, Gossiping, GBR and LEACH have been simulated using TinyOS and their power consumption is studied using PowerTOSSIM. A realization of these protocols has been carried out using Mica2 Motes.

Wireless Sensor Networks (WSNs) play a necessary position in todays actual world applications. WSNs are a team of autonomous sensor nodes that are geographically distributed to accumulate information and monitor events. WSNs are similarly sense that they rely on wireless connectivity and spontaneous formation of networks so that sensor information can be transported via wireless. Sometimes called dust network, minute sensors as small as dust referring to smart dust. WSNs are spatially distributed two to screen or bodily temperature, sound, pressure, etc. and to cooperatively ignore their data via the network to different locations. Each such sensor network node has typically various parts. Routing in WSNs in one of the important technique, because all node executes its battery power, if may be one node failure it collapse entire networks. Routing in WSNs is in reality difficult due to the intrinsic characteristics that differentiate these networks from different networks. The plan of routing protocols in WSN is affected via number of exigent factors. In this paper, a review on routing protocols for Wireless Sensor Networks (WSNs) and performance of its execution.

An energy efficient and QoS aware routing protocol for wireless sensor and actuator networks

The energy constraint sensor nodes operate on limited batteries, so the energy consumption is a key design criterion for the routing protocols in wireless sensor networks. Comparing with single path routing algorithm, multi-path routing algorithm can balance the network energy distribution and extend the network lifetime better. In this paper, we propose an Ant Colony- Based Multi-path Routing Algorithm, which uses Ant Colony Algorithm(ACA) to discover disjoint multipaths between the source nodes and sink node. We also propose a load balancing scheme to distribute the traffic over multipaths discovered. Simulation results show that our proposed algorithm achieves a higher node energy efficiency and longer network lifetime than that of the previous multipath routing algorithm.

There are different applications of Wireless Sensor Networks (WSNs). It can be deployed in various application areas such as monitoring of environment, surveillance, industrial automation, health-care, agriculture etc. A sensor node is usually a resource constrained device which has limited energy, processing power and memory. One of the important aspects of QoS aware routing protocols in WSNs is to send the delay sensitive data to a control station known as sink. In this paper, a delay sensitive cluster based routing protocol for wireless sensor networks is proposed. The purpose of clustering is to reduce energy consumption among the sensor nodes. The data forwarding mechanism of the protocol attempts to reduce end to end delay of delay sensitive traffic in reaching the sink. The protocol is evaluated through simulation using NS2.

Due to miniaturization of hardware and availability of low-cost, low-power sensors, Wireless Sensor Network and Multimedia Sensor Network applications are increasing day by day. Each application has a specific quality of service and experience requirements. The design of routing and MAC protocol which can fulfill the requirements of the application is challenging given the constrained nature of these devices. Considerable efforts are directed towards the design of energy efficient QoS-aware routing protocols. In this article, we present state of the art review of routing protocols for Wireless Multimedia Sensor Networks while addressing the challenges and providing insight into research issues.

Among important issues in the current energy-efficient routing protocols for wireless sensor networks (WSNs) based on clustering approaches are how to determine the optimal number of clusters, how to generate clusters and how select cluster-heads to improve WSNs performance. These approaches aim to reduce energy consumption of the WSN nodes and to extend the network lifetime. This paper reviews and compares the performance of three clustering techniques for determining number of clusters: rule of thumb, elbow, and silhouette. Each of these techniques involves a distributed K-means approach to generate clusters. Moreover, we compare these three clustering methods with low energy adaptive clustering hierarchy (LEACH), Imp LEACH and MODLEACH in terms of network lifetime, energy consumption and the number of packets sent to the base station (BS). The results obtained indicate that rule of thumb method provides better performance compared to other clustering techniques in terms of energy consumption and network lifetime.

HEER – A delay-aware and energy-efficient routing protocol for wireless sensor networks

Throughout the use of the small battery-operated sensor nodes encourage us to develop an energy-efficient routing protocol for wireless sensor networks (WSNs). The development of an energy-efficient routing protocol is a mainly adopted technique to enhance the lifetime of WSN. Many routing protocols are available, but the issue is still alive. Clustering is one of the most important techniques in the existing routing protocols. In the clustering-based model, the important thing is the selection of the cluster heads. In this paper, we have proposed a scheme that uses the bubble sort algorithm for cluster head selection by considering the remaining energy and the distance of the nodes in each cluster. Initially, the bubble sort algorithm chose the two nodes with the maximum remaining energy in the cluster and chose a cluster head with a small distance. The proposed scheme performs hierarchal routing and direct routing with some energy thresholds. The simulation will be performed in MATLAB to justify its performance and results and compared with the ECHERP model to justify its performance. Moreover, the simulations will be performed in two scenarios, gateway-based and without gateway to achieve more energy-efficient results.

In the era of New Generation Networks (NWGN) many emerging and future enable technologies accomplish the requirements of ubiquitous communication networks. Mobile wireless sensor network (mWSN) is one of the rising and emerging technologies for various application of NWGN, the enormous concerns of these networks are data gathering with energy efficiency. Routing protocol act as middleware, which is responsible to enhance the network performance with less energy consumption. In this paper we propose, analyze and validate mobile data collector (MDC) based LEACH routing protocol for environmental application which is based on multi-hop routing strategy. MDC based LEACH routing protocol utilizes self-organized sensor nodes with distributed cluster formation technique, randomly selection of cluster heads to equally balance the energy consumption among the sensor nodes and finally forward the data to base station by the support of MDC. Moreover, our approach shows the significant improvement in terms of energy consumption of sensor nodes, enhance network lifetime and data gathering at base station are outperform when compared with LEACH protocol. Key words: Mobile wireless sensor networks, wireless sensor networks, network protocol, cluster based routing, data gathering technique.