Genetic Algorithm-Based Data-Driven Process Selection System for Additive Manufacturing in Industry 4.0

Activity Modeling of Preliminary Additive Manufacturing Process Planning

Design for additive manufacturing (DFAM) seeks to develop designs that take advantage of the unique capabilities of additive manufacturing (AM) processes to maximize benefits. In this paper, several issues at the frontier of DFAM research are highlighted. First, the need is described to include as-manufactured mechanical and other physical properties, such as topology and shape optimization and generative design, during computational design. AM processes rarely produce parts with homogeneous composition and isotropic properties, so design methods and tools should not assume them. Second, the topic of designing for the AM process chain is important since AM-fabricated parts typically need postprocessing operations, such as support removal, finish machining, heat treatments, etc. DFAM methods need to incorporate the entire process chain, not just the AM process, which is explored with an example from metal powder bed fusion. Third, potentially, the largest benefit of AM can be realized by radically rethinking product architectures. Examples of an electric motorcycle and an assistive exosuit illustrate the ideas and potential benefits. Finally, some thoughts on design for 4D printing are offered, specifically for 3D printed morphing and deployable systems that utilize the shape memory effect.

In recent years, there has been widespread adoption of machine learning (ML) technologies to unravel intricate relationships among diverse parameters in various additive manufacturing (AM) techniques. These ML models excel at recognizing complex patterns from extensive, well-curated datasets, thereby unveiling latent knowledge crucial for informed decision-making during the AM process. The collaborative synergy between ML and AM holds the potential to revolutionize the design and production of AM-printed parts. This review delves into the challenges and opportunities emerging at the intersection of these two dynamic fields. It provides a comprehensive analysis of the publication landscape for ML-related research in the field of AM, explores common ML applications in AM research (such as quality control, process optimization, design optimization, microstructure analysis, and material formulation), and concludes by presenting an outlook that underscores the utilization of advanced ML models, the development of emerging sensors, and ML applications in emerging AM-related fields. Notably, ML has garnered increased attention in AM due to its superior performance across various AM-related applications. It is envisioned that the integration of ML into AM processes will significantly enhance 3D printing capabilities across diverse AM-related research areas.

Chapter 3 - Design methodologies for conventional and additive manufacturing

Additive manufacturing (AM) has recently been accorded considerable interest by manufacturers. Many manufacturing industries, amongst others in the aerospace sector, are already using AM parts or are investing in such manufacturing methods. Important material properties, such as microstructures, residual stress, and surface topography, can be affected by AM processes. In addition, a subtractive manufacturing (SM) process, such as machining, is required for finishing certain parts when accurate tolerances are required. This finish machining will subsequently affect the surface integrity and topography of the material. In this research work, we focused on the surface integrity of Ti-6Al-4V parts manufactured using three different types of AM and finished using an SM step. The aim of this study was to gain an understanding on how each process affects the resulting surface integrity of the material. It was found that each AM process affects the materials’ properties differently and that clear differences exist compared to a reference material manufactured using conventional methods. The newly generated surface was investigated after the SM step and each combination of AM/SM resulted in differences in surface integrity. It was found that different AM processes result in different microstructures which in turn affect surface integrity after the SM process.

The additive manufacturing (AM) methods are being used to develop products using metals, ceramics and polymers with techniques such as layer-by-layer construction and filament deposition. Aside from the accuracy of the specific AM techniques, the broadcast elements must be inspected in order to be enforced within the target applications. The properties such as surface roughness, porosity, residual stress, and linkage are mainly used to finalize the components developed using AM. Furthermore, significant mechanical properties such as surface roughness, microstructures, hardness, tensile energy, compressive energy, fatigue, creep, and residual strain must be investigated on printed metal parts. The parameters of the AM strategies are designed to examine their effects on mechanical properties. The relationships between the AM process, parameters, and materials are interconnected to investigate the mechanical properties of AM components. The various AM techniques for printing metal components are properly classified along with their process parameters. Furthermore, various mechanical tests for metal-based components are detailed using ASTM guidelines. Based on the findings of this study, powder bed fusion techniques are recommended for the development of metal-based components due to their favorable factors for achieving better mechanical properties.

Purpose Because of the significant differences in the features and requirements of specific products and the capabilities of various additive manufacturing (AM) solutions, selecting the most appropriate AM technology can be challenging. This study aims to propose a method to solve the complex process selection in 3D printing applications, especially by creating a new multicriteria decision-making tool that takes the direct certainty of each comparison to reflect the decision-maker’s desire effectively. Design/methodology/approach The methodology proposed includes five steps: defining the AM technology selection decision criteria and constraints, extracting available AM parameters from the database, evaluating the selected AM technology parameters based on the proposed decision-making methodology, improving the accuracy of the decision by adopting newly proposed weighting scheme and selecting optimal AM technologies by integrating information gathered from the whole decision-making process. Findings To demonstrate the feasibility and reliability of the proposed methodology, this case study describes a detailed industrial application in rapid investment casting that applies the weightings to a tailored AM technologies and materials database to determine the most suitable AM process. The results showed that the proposed methodology could solve complicated AM process selection problems at both the design and manufacturing stages. Originality/value This research proposes a unique multicriteria decision-making solution, which employs an exclusive weightings calculation algorithm that converts the decision-maker's subjective priority of the involved criteria into comparable values. The proposed framework can reduce decision-maker's comparison duty and potentially reduce errors in the pairwise comparisons used in other decision-making methodologies.

Additive manufacturing (AM) processes have many benefits for the fabrication of alloy parts, including the potential for greater microstructural control and targeted properties than traditional metallurgy processes. To accelerate utilization of this process to produce such parts, an effective computational modeling approach to identify the relationships between material and process parameters, microstructure, and part properties is essential. Development of such a model requires accounting for the many factors in play during this process, including laser absorption, material addition and melting, fluid flow, various modes of heat transport, and solidification. In this paper, we start with a more modest goal, to create a multiscale model for a specific AM process, Laser Engineered Net Shaping (LENS™), which couples a continuum-level description of a simplified beam melting problem (coupling heat absorption, heat transport, and fluid flow) with a Lattice Boltzmann-cellular automata (LB-CA) microscale model of combined fluid flow, solute transport, and solidification. We apply this model to a binary Ti-5.5 wt pct W alloy and compare calculated quantities, such as dendrite arm spacing, with experimental results reported in a companion paper.

PurposeThis paper aims to present a systematic approach in the literature survey related to metal additive manufacturing (AM) processes and its multi-physics continuum modelling approach for its better understanding.Design/methodology/approachA systematic review of the literature available in the area of continuum modelling practices adopted for the powder bed fusion (PBF) AM processes for the deposition of powder layer over the substrate along with quantification of residual stress and distortion. Discrete element method (DEM) and finite element method (FEM) approaches have been reviewed for the deposition of powder layer and thermo-mechanical modelling, respectively. Further, thermo-mechanical modelling adopted for the PBF AM process have been discussed in detail with its constituents. Finally, on the basis of prediction through thermo-mechanical models and experimental validation, distortion mitigation/minimisation techniques applied in PBF AM processes have been reviewed to provide a future direction in the field.FindingsThe findings of this paper are the future directions for the implementation and modification of the continuum modelling approaches applied to PBF AM processes. On the basis of the extensive review in the domain, gaps are recommended for future work for the betterment of modelling approach.Research limitations/implicationsThis paper is limited to review only the modelling approach adopted by the PBF AM processes, i.e. modelling techniques (DEM approach) used for the deposition of powder layer and macro-models at process scale for the prediction of residual stress and distortion in the component. Modelling of microstructure and grain growth has not been included in this paper.Originality/valueThis paper presents an extensive review of the FEM approach adopted for the prediction of residual stress and distortion in the PBF AM processes which sets the platform for the development of distortion mitigation techniques. An extensive review of distortion mitigation techniques has been presented in the last section of the paper, which has not been reviewed yet.

Purpose The development of additive manufacturing (AM) techniques has significantly expanded the design space for engineering structures and facilitated the practical application of novel concepts, such as meta-materials with diverse microstructures. However, in load-bearing applications—particularly in aerospace and aeroengine fields—additively manufactured (AMed) metallic materials and structures still face limitations due to the presence of inherent defects. For meta-materials, the geometric accuracy of microstructural cells is also difficult to ensure using current metal AM technologies. These defects and geometric inaccuracies can markedly affect the mechanical properties of mechanical meta-materials. Consequently, a substantial body of research has focused on investigating the mechanical behavior and performance of AMed mechanical meta-materials. This paper presents a comprehensive review of recent advancements in metal AM technologies, with a particular focus on defect characterization methods and the evaluation of strength and fatigue properties in AMed mechanical meta-materials. Design/methodology/approach This paper provides a state-of-the-art review on the AM techniques for mechanical meta-materials, defects and defect characterization methods in AMed structures, and evaluation methods of strength and fatigue properties of mechanical meta-materials. Findings Metal AM techniques for mechanical meta-materials, like selective laser melting, wire-arc AM, etc, and recently developed technologies like, online inspection during the AM process, are reviewed. The defects in AMed meta-materials, along with the corresponding characterization methods, are systematically summarized. Additionally, this paper presents a comprehensive overview of evaluation approaches for the strength and fatigue properties of mechanical meta-materials, encompassing experimental testing, theoretical modeling, numerical simulation, and machine learning techniques. Future perspectives on manufacturing and the mechanical property study of mechanical meta-materials are also given. Originality/value A systematic summary of metal AM techniques, as well as defect detection and characterization methods in AMed mechanical meta-materials, is provided. Furthermore, the paper presents a comprehensive review of the mechanical properties of mechanical meta-materials, with a particular focus on strength and fatigue performance.

The design methodologies and part shape algorithms for additive manufacturing (AM) are rapidly growing fields, proven to be of critical importance for the uptake of additive manufacturing of parts with enhanced performance in all major industrial sectors. The current trend for part design is a computationally driven approach where the parts are algorithmically morphed to meet the functional requirements with optimized performance in terms of material distribution. However, the manufacturability restrictions of AM processes are not considered at the primary design phases but at a later post-morphed stage of the part’s design. This paper proposes an AM design method to ensure: (1) optimized material distribution based on the load case and (2) the part’s manufacturability. The buildability restrictions from the direct energy deposition (DED) AM technology were used as input to the AM shaping algorithm to grant high AM manufacturability. The first step of this work was to define the term of AM manufacturability, its effect on AM production, and to propose a framework to estimate the quantified value of AM manufacturability for the given part design. Moreover, an AM design method is proposed, based on the developed internal stresses of the build volume for the load case. Stress tensors are used for the determination of the build orientation and as input for the part morphing. A top-down mesoscale geometric optimization is used to realize the AM part design. The DED Design for Additive Manufacturing (DfAM) rules are used to delimitate the morphing of the part, representing at the same time the freeform mindset of the AM technology. The morphed shape of the part is optimized in terms of topology and AM manufacturability. The topology optimization and AM manufacturability indicator (TMI) is introduced to screen the percentage of design elements that serve topology optimization and the ones that serve AM manufacturability. In the end, a case study for proof of concept is realized.

The cyclic manufacturing processes of Additive Manufacturing (AM) create three-dimensional objects layer by layer, offer a large freedom in design, and suffer from very different restrictions compared to conventional manufacturing processes. Nowadays, AM is a mature manufacturing technology capable of being applied in industrial series production. However, the AM technology enters the industrial series production only slowly. A main reason is the fact that engineers in industry have little to no experience in Design for Additive Manufacturing (DfAM) and an integrated experience transfer in engineering education is not yet widespread. To implement the AM technology, a course for graduate students was developed and established, mainly in the master studies and in the field of mechanical engineering. The goal of the course is that the students gain experience in the possibilities and the restrictions of DfAM. The course is based on the Experience Transfer Model (ETM) and is divided in two parts, a lecture and a team project. In the lecture, the students gain explicit knowledge for DfAM. In the practical team project, the students develop and produce AM prototypes based on a variety of AM processes and gain implicit knowledge. The concept of the team project is based on Problem-Based Learning (PBL). The whole team project follows a product development process, including presentations of milestone. The physical outcomes showed that the students are able to design AM optimized parts without falling back into old design patterns. In a survey at the end of the lecture series, the students gave the authors feedback. The large majority of the feedback was positive.

Direct-metal additive manufacturing (AM) processes such as Selective Laser Melting (SLM) and Electron Beam Melting (EBM) methods are being used to fabricate complex metallic cellular structures with a laser or electron beam over a metal powder bed. Even though these processes have excellent capabilities to fabricate parts with cellular mesostructures, there exist several constraints in the processes and applications: limited selection of materials, high thermal stress by the high local energy source, poor surface finish, and anisotropic properties of parts caused by combined effects of one-dimensional (1D) energy based patterning mechanism, the deposition layer thickness, powder size, power and travel speed of laser or electron beam. In addition, manufacturing cost is still high with the Direct-metal AM processes. As an alternative for manufacturing metallic 3D cellular structures, which can overcome the disadvantages of direct-metal AM techniques, polymer AM methods may be combined with metal casting. We may call this “Indirect AM based Casting (I AM casting)”. The objective of this study is to explore the potential of I AM Casting associated with development of a novel manufacturing process — Indirect 3D Printing based centrifugal casting which is capable of producing multifunctional metallic cellular structures with internal cooling channels having a 2mm inner diameter and 0.5mm wall thickness. We characterize polymers by making expendable patterns with a polyjet type 3D printer; e.g., modulus, strength, melting and glass transition temperatures and thermal expansion coefficients. A transient flow and heat-transfer analysis of molten metal through 3D cellular network mold will be conducted. Solidification of molten metal through cellular mold during casting will be simulated with temperature dependent properties of molten metal and mold over a range of running temperatures. The volume of fluid (VOF) method will be implemented to simulate the solidification of molten metal together with a user defined function (UDF) of ANSYS/FLUENT. Finally, experimental validation will be conducted.

Additive manufacturing (AM) processes have revolutionized manufacturing industries by enabling the production of complex geometries with reduced material waste and lead times. However, ensuring the quality of AM parts remains a significant challenge due to the complexity of the process and inherent variability in material properties. This review investigates the use of artificial intelligence (AI) to enhance quality assurance in AM processes, focusing on specific machine learning techniques such as convolutional neural networks for defect detection, support vector machines for classification of material properties, and reinforcement learning for real-time process optimization. The AI-driven methodologies are applied to predict defects, optimize process parameters, and monitor real-time production quality, utilizing large datasets generated from sensors and in-situ monitoring systems. The study demonstrates significant improvements in the accuracy of defect detection, the reliability of material property classification, and the efficiency of process optimization. In addition, it addresses challenges such as data pre-processing, model interpretability, and integration with existing AM systems. The findings highlight the potential of AI to transform quality assurance in AM and outline future research directions for further integration and enhancement of AI techniques in AM.

The unique design freedom offered by additive manufacturing (AM) technologies enables engineers to develop more innovative products with relatively lower costs within a shorter period of processing time in comparison with conventional manufacturing methods. On the other hand, the unique capabilities of AM have created a platform for researchers to combine several engineering methods with the new manufacturing technique to grow industrial applications as well as resolve the existing issues with AM processes. Understanding the research values that AM offers academic environments, this paper performs a systematic survey on AM-related research topics in the fields of mechanical engineering and materials science that have attracted much attention from research teams over the last few years. These topics, namely process modelling in AM, innovative research in AM, generative design by AM, material characterisation in AM processes, and finally, design for additive manufacturing (DfAM), are notably investigated through this study.