Graph representation for structural topology optimization using genetic algorithms

Isogeometric analysis (IGA) connects CAE with standard CAD design tools and has been utilized for a decade in structural optimization. FEA has a number of drawbacks, including a lack of linkage between analytic and geometric models, a shortage of continuity between components, and a lack of accuracy for high-order elements. Isogeometric analysis effectively overcomes these obstacles. This paper proposes the isogeometric topological optimization mathematical model depending on the asymmetric constitutive relationship of tension and compression microscopic materials. We provide a new density-based topology optimization formulation in which the design domain is limited to the B-spline space. A rectangular domain with a tensor-product is embedded in a design domain that is arbitrarily shaped. The density field is represented using B-splines. The intrinsic filter provided by the B-spline representation for topology optimization is governed by the degrees of B-spline and the knot spans. This B-spline effectively removes numerical artifacts and controls the minimum feature-length in; when the B-spline basis functions span many analysis elements. Benchmark problems in structural topology optimization are computed through Evolutionary Structural Optimization (ESO) algorithm. Comparisons of the optimal structure topologies using finite element analysis and isogeometric collocation methods are analyzed. The influence of different tension-compression stiffness ratios on the final structure topologies is listed and analyzed. The numerical results show the reliability and performance of the proposed mathematical formulation and asymmetry of natural structure.

A new fuzzy strategy for size and topology optimization of truss structures

A bit-array representation method for structural topology optimization using the GA is proposed. The importance of design connectivity is further emphasized and a hierarchical violation penalty method is proposed to penalize the violated constraint functions so that the problem of representation degeneracy can be overcome and the GA search can be driven towards the combination of better structural performance, less unusable material and fewer connected objects in the design domain. An identical initialization method is also proposed to test the performance of the GA operators. With the appropriately selected GA operators, the bit-array representation GA is applied to the structural topology optimization problems of minimum weight. Numerical results demonstrate that the present GA can achieve better accuracy with less computational cost and suggest that the GA performance can be significantly improved by handling the design connectivity properly.

Genetic algorithms (GAs) have become a popular optimization tool for many areas of research and topology optimization an effective design tool for obtaining efficient and lighter structures. In this paper, a versatile, robust and enhanced GA is proposed for structural topology optimization by using problem-specific knowledge. The original discrete black-and-white (0–1) problem is directly solved by using a bit-array representation method. To address the related pronounced connectivity issue effectively, the four-neighbourhood connectivity is used to suppress the occurrence of checkerboard patterns. A simpler version of the perimeter control approach is developed to obtain a well-posed problem and the total number of hinges of each individual is explicitly penalized to achieve a hinge-free design. To handle the problem of representation degeneracy effectively, a recessive gene technique is applied to viable topologies while unusable topologies are penalized in a hierarchical manner. An efficient FEM-based function evaluation method is developed to reduce the computational cost. A dynamic penalty method is presented for the GA to convert the constrained optimization problem into an unconstrained problem without the possible degeneracy. With all these enhancements and appropriate choice of the GA operators, the present GA can achieve significant improvements in evolving into near-optimum solutions and viable topologies with checkerboard free, mesh independent and hinge-free characteristics. Numerical results show that the present GA can be more efficient and robust than the conventional GAs in solving the structural topology optimization problems of minimum compliance design, minimum weight design and optimal compliant mechanisms design. It is suggested that the present enhanced GA using problem-specific knowledge can be a powerful global search tool for structural topology optimization. Copyright © 2005 John Wiley & Sons, Ltd.

Topology optimization with closed B-splines and Boolean operations

Structural topology optimization has gained widespread attention due to more possibilities of innovative structural design. The current research focus/hotspots, application areas, main research scholars, institutions and the countries involved in structural topology optimization are visually presented through clustering and visual analysis based on CiteSpace. The four metric dimensions of the literatures in this paper are as follows: annual quantity of papers and core countries, core authors and co-authors’ institutions, hotspots and burst terms, and the highly co-cited papers. The results show the research hotspots in this field are concentrated on keywords such as "level set method", "sensitivity analysis", "homogenization", "genetic algorithm", etc. Regarding the research frontier, “moving morphable component (MMC)”, “additive manufacturing (AM)” and “deep learning” are hot topics. In addition, Y. Sui, Z. Kang and O. Sigmund, etc. have high publications. M. Bendsøe and O. Sigmund have high citations. Dalian University of Technology, Technical University of Denmark, etc. are prominent institutions. Moreover, China accounts for more than 34% in the terms of original WOS literatures following by the USA and Australia. This paper could identify structural topology optimization development patterns for the scholars concerned with this field, especially novices, to quickly focus and track the research priorities.

In this study, the binary bat algorithm (BBA) for structural topology optimization is implemented. The problem is to find the stiffest structure using a certain amount of material and some constraints using the bit-array representation method. A new filtering algorithm is proposed to make BBA find designs with no separated objects, no checkerboard patterns, less unusable material, and higher structural performance. A volition penalty function for topology optimization is also proposed to accelerate the convergence toward the optimal design. The main effect of using the BBA lies in the fact that the BBA is able to handle a large number of design variables in comparison with other well-known metaheuristic algorithms. Based on the numerical results of four benchmark problems in structural topology optimization for minimum compliance, the following conclusions are made: (1) The BBA with the proposed filtering algorithm and penalty function are effective in solving large-scale numerical topology optimization problems (fine finite elements mesh). (2) The proposed algorithm produces solid-void designs without gray areas, which makes them practical solutions that are applicable in manufacturing.

During the last 20 years, structural optimization has become one of the most important topics of engineering applications. Design optimization of structure has been an interesting area of research in the field of engineering design for its ability to short the design cycle and to enhance product quality. Significant research activity has occurred in the area of structural optimization in the last decade. Especially for topology optimization of structure, many new theoretical, algorithmic, and computational contributions have resulted by researchers and engineers. Topology optimization is a powerful tool for global and multi-scale design of macrostructures, microstructures, and the cell of prescribed composite materials. The population based evolutionary algorithms have emerged as powerful mechanism for finding optimum solutions of complex optimization problems in engineering during the last two decades. Evolutionary computation is the study of computational systems which use ideas and get inspiration from natural evolution and adaptation [1]. The thinking has wide application in various engineering fields, such as computer science, artificial intelligence, operations research. Genetic algorithm is another kind of bio-inspired optimization method and it is playing an increasingly important role in studies of complex adaptive systems. Its application ranges from adaptive agents in economic theory to the use of machine learning techniques in the design of complex devices and structures, such as aircraft turbines and integrated circuits [2]. Optimization of structures can be classified into three categories: sizing, shaping, and topology optimization. In the topology optimization, it is concerned with the structure members and connectivity between members. In general, it is easily represented by discrete variables rather than by those used for continuous optimization problems. Topology optimization is the most difficult and complex among three categories and it is special useful in developing innovative conceptual designs. Structural optimization, in particular the topology optimization, has been identified as one of the most challenging tasks in structural design. Various techniques and approaches have been established during the last two decades. Topology optimization usually referred to as layout optimization or general shape optimization [3]. It lets engineers get the optimal topology of structure or new configurations during product design phase, as they are implementing the design of the size

Bi-directional evolutionary topology optimization of continuum structures subjected to inertial loads

Structural topology constraints in topology optimization are an important research topic. The structural topology is characterized by the topological invariance of the number of holes. The holes of a structure in 3D space can be classified as internally enclosed holes and external through-holes (or tunnels). The genus is the number of tunnels. This article proposes the quotient set design variable method (QSDV) to implement the inequality constraint on the maximum genus allowed in an optimized structure for 3D structural topology optimization. The principle of the QSDV is to classify the changing design variables according to the connectivity of the elements in a structure to obtain the quotient set and update the corresponding elements in the quotient set to meet the topological constraint. Based on the standard relaxation algorithm discrete variable topology optimization method (DVTOCRA), the effectiveness of the QSDV is illustrated in numerical examples of a 3D cantilever beam.

A novel parameterization concept for structural truss topology optimization is presented in this article that enables the use of evolutionary algorithms in design of large-scale structures. The representational power of Boolean networks is used here to parameterize truss topology. A genetic algorithm then operates on parameters that govern the generation of truss topologies using this random network instead of operating directly on design variables. A genetic algorithm implementation is also presented that is congruent with the local rule application of the random network. The primary advantage of using a Boolean random network representation is that a relatively large number of ground structure nodes can be used, enabling successful exploration of a large-scale design space. In the classical binary representation of ground structures, the number of optimization variables increases quadratically with the number of nodes, restricting the maximum number of nodes that can be considered using a ground structure approach. The Boolean random network representation proposed here allows for the exploration of the entire topology space in a systematic way using only a linear number of variables. The number of nodes in the design domain, therefore, can be increased significantly. Truss member geometry and size optimization is performed here in a nested manner where an inner loop size optimization problem is solved for every candidate topology using sequential linear programming with move-limits. The Boolean random network and nested inner-loop optimization allows for the concurrent optimization of truss topology, geometry, and size. The effectiveness of this method is demonstrated using a planar truss design optimization benchmark problem.

This article proposes an efficient parameterized level set method (PLSM) for structural topology optimization design with minimum compliance as the objective function and volume fraction as the constraint condition. In the stage of establishing the optimization model, the level set function (LSF) is interpolated using compactly-supported radial basis functions (CS-RBFs) to transform the Hamilton-Jacobi partial differential equation (PDE) into ordinary differential equations (ODEs), thereby making the evolution of the LSF more convenient and efficient, and ensuring the smoothness of the optimization result boundary. The method of moving asymptotes (MMA) is used for solving the established optimization model, and meanwhile the shape sensitivity constraint factor is added to improve computational efficiency. During the evolution of the LSF, an approximate re-initialization scheme is employed to prevent the gradient of the LSF boundary from being too large or too small, thereby improving the numerical stability and the convergence speed of structural topology optimization process. Furthermore, the proposed method is also extensible and applicable to topology optimization of multi-material structures. The feasibility and effectiveness of this method have been verified through several typical numerical examples involving topology optimization of single-material structures and multi-material structures within the framework of minimum compliance design. HIGHLIGHTS An efficient parameterized level set method using the approximate re-initialization scheme is proposed for structural topology optimization. The approximate re-initialization scheme is employed when solving the parameterized level set function via the MMA algorithm. This scheme can prevents the gradient of the level set function boundary from being too large or too small, making the level set function update more stable and accelerating the convergence speed of structural topology optimization. The effectiveness and feasibility of the proposed method are demonstrated through examples of single-material and multi-material structural topology optimization.

Cross-view graph contrastive learning with hypergraph

According to the requirements of the aerospace industry for high strength, high stiffness, and lightweight structural parts, topology optimization has been proved to be an effective product design method. As one of the most conceptual and prospective structural optimization design methods, topology optimization intends to seek the optimal layout of materials in an allowed design region under a given load and boundary conditions. Thus, the object of study in the article is the method of topological optimization of aircraft structures. The goal of this article is to analyze the existing approaches, algorithms, as well as application of the method of topological optimization in the aerospace field in applied problems. The tasks are to describe the existing various approaches methods, features, and research directions of topological optimization as well as to study the possibility of application in the manufacturing process of composite structures. The following results were obtained. The optimization methods are briefly explained and compared, and the advantages and limitations of each approach are discussed. The various ways of simultaneous optimization of fiber orientation and structural topology were described and analyzed. The features of different methods of continuous fiber orientation optimization method were reviewed. The discrete fiber orientation optimization methods were represented. The possibility of multi-scale concurrent topological optimization was described. The combination of topology optimization and additive manufacturing was considered. Finally, the topology optimization of FRC structures which have been resolved in literature are reviewed and the potential research fields requiring more investigation are pointed out. Conclusions. In the article, a comprehensive review of the topology optimization design of FRC structures was presented. The promising way is to combine topology optimization with additive manufacturing techniques. However, these proposed methods may not suitable for other more complex problems, such as bucking stability and natural frequency. Hence, the topology optimization design of complex FRC components under complicated conditions is the main challenge in the future. This can be a new trend in the topology design of FRC structures.

Structural topology optimization seeks to identify the most efficient way to allocate material within a given domain to achieve a specific design objective. This research area has broad applications in various fields, including mechanical design and other physical disciplines. Over the past two decades, a great variety of applications and diverse research papers on structural topology optimization have been undertaken and published in the last two decades to highlight its acceptance and advantages. This paper presents a scientometric analysis of 5713 papers published between 2000 and 2022 to provide an overview and visualization of the development of structural topology optimization. While there are numerous approaches to topology optimization, this study focuses on presenting a quantitative analysis of the most popular and influential methods. The method used in this paper involved data collection and analysis through CiteSpace, one of the most popular software tools in this field. This paper provides a comprehensive overview of the latest developments of research in structural topology optimization and identifies key directions for future research. The analysis of the top 10 co-cited articles revealed four main approaches that have been developed for structural topology optimization.