Green Communication via Power-Optimized HARQ Protocols

This letter studies the throughput and the outage probability of spectrum sharing networks utilizing hybrid automatic repeat request (HARQ) feedback. We focus on the repetition time diversity and the incremental redundancy HARQ protocols where the results are obtained for both continuous and bursting communication models. The channel data transmission efficiency is investigated in the presence of both secondary user peak transmission power and primary user received interference power constraints. Finally, we evaluate the effect of secondary-primary channel state information imperfection on the performance of the secondary channel. Simulation results show that, while the throughput is not necessarily increased by HARQ, substantial outage probability reduction is achieved in all conditions.

Energy delay tradeoff (EDT) is a fundamental tradeoff that can play a crucial role in understanding the energy efficiency of various transmission schemes. For hybrid automatic repeat request (HARQ) protocols, EDT can be well defined. In this paper, in order to understand the EDT for wireless multiuser systems, we consider downlink channels where the HARQ with incremental redundancy (HARQ-IR) protocol is employed for reliable transmissions to users. For a given total power, the power allocation is studied and its impact on EDT is investigated. It is shown that the multiuser diversity (MD)-based power allocation becomes preferable when a long effective delay is allowed.

Predictor antenna (PA) system is referred to as a system with two sets of antennas on the roof of a vehicle, where the PAs positioned in the front of the vehicle are used to predict the channel state observed by the receive antennas (RAs) that are aligned behind the PAs. In this letter, we study the effect of spatial mismatch on the accuracy of channel state information estimation, and analyze the delay-constrained average rate of hybrid automatic repeat request (HARQ)-based PA systems. We consider variable-length incremental redundancy (INR) HARQ protocol, and derive a closed-form expression for the maximum average rate subject to a maximum delay constraint. Moreover, we study the effect of different parameters such as the vehicle speed, the antenna distance and the rate allocation on the system performance. The results indicate that, compared to the open-loop case, the delay-limited average rate is considerably improved with our proposed PA-HARQ scheme.

In this article, we consider physical-layer security (PLS) of the Internet-of-Things (IoT) communications based on hybrid automatic repeat request (HARQ) protocols in multiple-input single-output single-eavesdropper (MISOSE) channels. Owing to the reciprocity of wireless channels, a negative acknowledge frame can be used to obtain the channel state information (CSI) from a source with multiple antennas to an IoT destination device, and this CSI of a legitimate link is used for beamforming for the next transmission round (TR). Therefore, a higher secrecy rate can be expected from retransmissions with beamforming based on the CSI as compared to the first TR without CSI. To evaluate the secrecy throughput under time-invariant and time-varying channels, connection and secrecy outage probabilities (OPs) are derived. By exploiting the characteristics of the OPs, we suggest an approximated secrecy throughput. We then consider the optimization of the approximated secrecy throughput considering the rate parameters for legitimate and eavesdropping links. With an alternating optimization approach, an algorithm to find convergent system parameters, i.e., the rates for legitimate and eavesdropping links, is proposed. Moreover, an asymptotic analysis with the large number of transmit antennas indicates an interesting behavior of the secrecy rate with regard to the number of TRs. The analytical results are verified by rigorous numerical simulations and they can serve as a useful guideline to those involved in the design of secure IoT communication systems with HARQ in MISOSE channels.

Adaptive channel and power allocation of downlink multi-user MC-CDMA systems

A new hybrid automatic repeat request (HARQ) scheme is proposed for multiple-input multiple-output (MIMO) systems when the acknowledgment (ACK) bundling is applied for packet retransmissions. In the proposed HARQ scheme, both Chase combining (CC) and incremental redundancy (IR) are utilised for a retransmission request, and the proposed HARQ scheme is called a multiple retransmission strategy-based HARQ (MRS-HARQ). During the reception process of the MRS-HARQ, IR packets obtain signal-to-noise ratio gains using the extended detection with CC packets and the improved IR packets are utilised to eliminate the interference from the CC packets. This sequential reliability improvement allows the MRS-HARQ to decrease the occurrence of the deficient transmissions, and the proposed MRS-HARQ can achieve an improved error performance and throughput over the conventional CC-based and IR-based HARQ schemes with the ACK bundling.

We consider power allocation and relay positioning with the objective to minimize system error probability in a dual-hop regenerative relaying system operating under co-channel interference. First, assuming fixed relay location, adaptive power allocation at the source and the relay nodes under joint power constraint is presented. Then considering fixed power allocation scheme, the optimal relay position is obtained. Results show that optimum power allocation, optimum relay location and joint optimization of the power allocation and relay positioning significantly improve the system performance in terms of error probability compared to uniform power allocation and mid-point distance location for the relay node.

In this paper, we propose a cross-layer design which combines adaptive modulation and coding (AMC) at the physical layer with a hybrid automatic repeat request (HARQ) protocol at the data link layer to minimize the packet error rate (PER) and maximize the spectral efficiency. By using Markov model to predict the channel condition of next frame according to the second order statistics characteristics of the former frame, we calculate the conditional probability density function and joint probability density function of signal to noise ratio (SNR). Further, we derive the packet error rate and average spectral efficiency in closed-form for transmission over Nakagami-m fading channels. Numerical results show that the proposed scheme can obtain lower PER and higher spectral efficiency c ompared with traditional HARQ protocol s. The cross-layer design scheme combing type-III HARQ with AMC can achieve the highest spectral efficiency and the lowest PER than type-I HARQ and type-II HARQ.

In spatial modulation (SM) systems, when channel state information is available at the transmitter, adaptive power allocation can be exploited to enhance the SM performance. In this paper, optimal power allocation in SM systems is considered from an information-theoretical view. First, as there is no closed-form expression of the SM capacity, the instantaneous mutual information is formulated in an analytic form for SM systems with two transmit antennas. Then, two power-allocation algorithms are proposed to maximize the SM mutual information. One is a sub-optimal power-allocation algorithm that is established in closed form to maximize the upper bound of SM mutual information. The other is an iterative algorithm for optimal power allocation that is proposed to achieve the maximum mutual information of SM systems while dramatically reducing the operational complexity compared with global computer searching. To evaluate the performance of the proposed power-allocation algorithms, numerical and simulation results are reported in terms of outage capacity and ergodic capacity, which demonstrates that the proposed power-allocation algorithms significantly improve the SM performance, compared with conventional equal-power allocation.

Cross-layer scheduling and hybrid ARQ (HARQ) are effective means to improve the spectral efficiency of wireless systems and have been widely adopted in next generation wireless systems. However, most of the existing works handle HARQ and cross-layer scheduling in a decoupled manner based on heuristic approach. In this paper, we propose an integrated design framework for cross-layer scheduling and HARQ design in TDD multiuser systems with outdated knowledge of channel state information at the base station (CSIT). We focus on incremental redundancy in HARQ and derive the asymptotically optimal cross-layer policy (power allocation, rate allocation and user selection policies) to optimize the system goodput. In addition, we derive analytically closed-form expressions for the average system goodput where we can obtain useful design insights. For instance, the average system goodput scales in the order of O(In L) where L is the maximum transmission number of a packet, illustrating how the HARQ can enhance the cross-layer system goodput gain.

As an efficient supplement for terrestrial communications, e.g., fifth-generation communication networks, satellite communication has been proved as a promising choice to realize seamless coverage, due to its inherent superiority over common wireless communication systems, like large-scale coverage area and flexibility of deployment. In this article, a satellite-terrestrial transmission (STT) system including a satellite transmitter (S) and a group of terrestrial receivers (D) is focused on. Considering the randomness of D and employing stochastic geometry, the outage performance and diversity gain of three hybrid automatic repeat request (HARQ) schemes, generalized slotted ALOHA (GSA), repetition time diversity (RTD) and general incremental redundancy (IR), are respectively studied. In detail, the exact closed-form analytical expression for the outage probability (OP) is derived for the GSA scheme, while the approximated expression for the OP of RTD scheme is presented and a useful expression for the OP of IR scheme is derived. Furthermore, the diversity gains of the three considered HARQ schemes are respectively investigated in STT scenarios. Finally, some numerical results are provided to validate the proposed analysis models.

In this paper, the performance of dual-hop multiple-input multiple-output (MIMO) relay system with transmit beamforming and maximum-ratio combining scheme (MIMO-MRC) for each hop is investigated. Both the relay and destination are subjected to multiple co-channel interferences (CCIs). An exact closed-form outage probability expression is derived for the Rayleigh fading channels. Then, to render more insights into the combined effects of multiple antennas and CCIs, the asymptotic behavior of the outage probability is also presented and discussed. Based on the asymptotic expressions, we explicitly characterize the system diversity order. The results show that the diversity order is essentially directly proportional to the number of antennas at the relay. Furthermore, employing both exact optimal power allocation (OPA) and asymptotic OPA methods, we determine the optimal power allocation (OPA) such that the outage probability is minimized. We show that OPA offers superior performance over uniform power allocation, and highlight a pivotal design choice for maximizing system performance without investing additional resources.

This paper investigates an unmanned aerial vehicle (UAV) enabled full-duplex relaying system. By assuming that the UAV follows a circular trajectory and applies decode-and-forward relaying strategy, we study the joint design of beamforming and power allocation to maximize the instantaneous data rate, under both the individual and the sum power constraints over the source and relay nodes. As the problem is non-convex, we propose an efficient sub-optimal solution based on block-coordinate descent method by decomposing the problem into two sub-problems: a beamforming optimization sub-problem with given power allocation and a power allocation sub-problem with fixed beamforming. For the beamforming design sub-problem, the optimal solution is obtained based on the semi-definite relaxation technique. For the power allocation sub-problem, the optimal solution is obtained in closed form. Then, the closed-form cumulative distribution function and outage probability expressions for sub-optimal beamforming with both uniform power allocation and optimal power allocation are derived. In addition, simple and informative high signal-to-noise ratio (SNR) approximations for outage probability expressions are presented to gain insights. Finally, the optimal flying altitude that minimizes the average outage probability is obtained via one-dimensional search.

A sequential optimization algorithm (SOA) for resource allocation in a cyclic-prefixed single-carrier cognitive relay system is proposed in this study. Both subcarrier pairing (SP) and power allocation are performed subject to a primary user interference constraint to minimize the mean squared error of frequency-domain equalization at the secondary destination receiver. Under uniform power allocation at the secondary source and optimal power allocation at the secondary relay, the ordered SP is proven to be asymptotically optimal in maximizing the matched filter bound on the signal-to-interference-plus-noise ratio. SOA implements the ordered SP before power allocation optimization by decoupling the ordered SP from the power allocation. Simulation results show that SOA can optimize resource allocation efficiently by significantly reducing complexity.

We investigate a power allocation optimization problem under the scenario of multiple cooperative relays and one destination with multiple receiving antennas. We consider the relay protocol, decode and forward (DAF). An optimal power allocation scheme (OPA), through singular value decomposition (SVD) of the channel matrix, is developed among the relay nodes under a certain power constraint to achieve the maximum channel capacity. The expression of the optimal power allocation coefficient is derived using Lagrange multiplier. Simulation results show that the OPA can obtain higher capacity gain and lower outage probability comparing with the uniform power allocation (UPA) scheme. Moreover, we show that the OPA with DAF has better performance than it with AAF.