Harnessing Large Language Models for Text-Rich Sequential Recommendation

In this paper, alternative direction finding methods have been proposed using deep learning techniques. Firstly, Regeression and Classification models have created by using Convolutional Neural Networks (CNNs). In the second Convolutional Neural Networks and Recurrent Neural Networks (RNNs) have been utilized in the proposed methods. Despite having vast amount of direction finding studies, utilization of neural networks is scarce in literature and past works mostly only includes usage of CNNs. In this study, direction finding is performed by learning signals reaching multiple antenna arrays by networks. Created neural networks have been fed with different data formats and their performances against noisy and no-noise data have been shown. In addition, comparative analysis of the developed models were made in the similar Signal-to-Noise Ratio (SNR) range with the subspace based MUSIC algorithm, which is frequently used in direction finding.

The study presents the results of the development and testing of deep learning neural network architectures, which demonstrate high accuracy rates in classifying neurophysiological data, in particular hemodynamic brain activation patterns obtained by functional near-infrared spectroscopy, during solving mathematical problems on spatial-numerical associations. The analyzed signal represents a multidimensional time series of oxyhemoglobin and deoxyhemoglobin dynamics. Taking the specificity of the fNIRS signal into account, a comparative analysis of 2 types of neural network architectures was carried out: (1) architectures based on recurrent neural networks: recurrent neural network with long short-term memory, recurrent neural network with long short-term memory with fully connected layers, bidirectional recurrent neural network with long short-term memory, convolutional recurrent neural network with long short-term memory; (2) architectures based on convolutional neural networks with 1D convolutions: convolutional neural network, fully convolutional neural network, residual neural network. Trained long short-term memory recurrent neural network architectures showed worse results in accuracy in comparison with 1D convolutional neural network architectures. Residual neural network (model_Resnet) demonstrated the highest accuracy rates in three experimental conditions more than 88% in detecting age-related differences in brain activation during spatial-numerical association tasks considering the individual characteristics of the respondents’ signal.

This paper proposes a novel deep learning architecture involving combinations of Convolutional Neural Networks (CNN) layers and Recurrent neural networks (RNN) layers that can be used to perform segmentation and classification of 5 cardiac rhythms based on ECG recordings. The algorithm is developed in a sequence to sequence setting where the input is a sequence of five second ECG signal sliding windows and the output is a sequence of cardiac rhythm labels. The novel architecture processes as input both the spectrograms of the ECG signal as well as the heartbeats' signal waveform. Additionally, we are able to train the model in the presence of label noise. The model's performance and generalizability is verified on an external database different from the one we used to train. Experimental result shows this approach can achieve an average F1 scores of 0.89 (averaged across 5 classes). The proposed model also achieves comparable classification performance to existing state-of-the-art approach with considerably less number of training parameters.

The presented paper proposes a new speech command recognition model for novel engineering applications with limited resources. We built the proposed model with the help of a Convolutional Recurrent Neural Network (CRNN). The use of CRNN instead of Convolutional Neural Network (CNN) helps us to reduce the model parameters and memory requirement as per resource constraints. Furthermore, we insert transmute and curtailment layer between the layers of CRNN. By doing this we further reduce model parameters and float number of operations to half of the CRNN requirement. The proposed model is tested on Google’s speech command dataset. The obtained result shows that the proposed CRNN model requires 1/3 parameters as compared to the CNN model. The number of parameters of the CRNN model is further reduced by 45% and the float numbers of operations between 2% to 12 % in different recognition tasks. The recognition accuracy of the proposed model is 96% on Google’s speech command dataset, and on laboratory recording, its recognition accuracy is 89%.

Convolutional neural networks (CNN) applications range from recognition and reasoning (such as handwriting recognition, facial expression recognition and video surveillance) to intelligent text applications such as semantic text analysis and natural language processing applications. Two key observations drive the design of a new architecture for CNN. First, CNN workloads exhibit a widely varying mix of three types of parallelism: parallelism within a convolution operation, intra-output parallelism where multiple input sources (features) are combined to create a single output, and inter-output parallelism where multiple, independent outputs (features) are computed simultaneously. Workloads differ significantly across different CNN applications, and across different layers of a CNN. Second, the number of processing elements in an architecture continues to scale (as per Moore's law) much faster than off-chip memory bandwidth (or pin-count) of chips. Based on these two observations, we show that for a given number of processing elements and off-chip memory bandwidth, a new CNN hardware architecture that dynamically configures the hardware on-the-fly to match the specific mix of parallelism in a given workload gives the best throughput performance. Our CNN compiler automatically translates high abstraction network specification into a parallel microprogram (a sequence of low-level VLIW instructions) that is mapped, scheduled and executed by the coprocessor. Compared to a 2.3 GHz quad-core, dual socket Intel Xeon, 1.35 GHz C870 GPU, and a 200 MHz FPGA implementation, our 120 MHz dynamically configurable architecture is 4x to 8x faster. This is the first CNN architecture to achieve real-time video stream processing (25 to 30 frames per second) on a wide range of object detection and recognition tasks.

Early detection and treatment are crucial for recovery from cancer. Due to rapid advancement in medical imaging techniques, today doctors can scan various body parts from different perspectives to diagnose cancer or see the progress during a course of treatment. Such techniques are less painful and require less preparation and recovery. The recent evolution of AI, particularly deep learning algorithms have shown potential in computer-aided diagnosis of cancer. These include analysis of cancer images for detection of tumor region, prognosis, skin tissue inspection, etc. Convolutional Neural Network (CNN) based image processing techniques are showing promising results in the diagnosis of breast cancer, skin cancer, prostate cancer, lung cancer, etc. Literature shows many other CNN-based models such as feed-forward neural network, Deep CNN, Multi-Crop CNN, fully convolutional networks (FCNs), Deep Fully Convolutional Network (DFCNet), Recurrent neural networks, etc. The CNN focus solely on the image-specific features and hence require a lesser number of input parameters. A CNN model reduces the size of the input image vector without losing the features critical for making an accurate prediction. This makes it easier to process and reduces computational complexity. CNNs are also not sensitive to the object positioning in an image since the approximate position of image motifs relative to others is known. CNN deals with the variations in images through augmentation and other pre-processing techniques. This makes them robust to various straining conditions in images. This chapter presents an overview of a generic CNN architecture followed by a discussion on major advances in CNN models and their applications for cancer image analysis.

A hybrid model based on neural networks for biomedical relation extraction

In existing convolutional neural networks (CNNs), both convolution and pooling are locally performed for image regions separately, no contextual dependencies between different image regions have been taken into consideration. Such dependencies represent useful spatial structure information in images. Whereas recurrent neural networks (RNNs) are designed for learning contextual dependencies among sequential data by using the recurrent (feedback) connections. In this work, we propose the convolutional recurrent neural network (C-RNN), which learns the spatial dependencies between image regions to enhance the discriminative power of image representation. The C-RNN is trained in an end-to-end manner from raw pixel images. CNN layers are firstly processed to generate middle level features. RNN layer is then learned to encode spatial dependencies. The C-RNN can learn better image representation, especially for images with obvious spatial contextual dependencies. Our method achieves competitive performance on ILSVRC 2012, SUN 397, and MIT indoor.

Objective. Event-related potential (ERP) sensitivity to faces is predominantly characterized by an N170 peak that has greater amplitude and shorter latency when elicited by human faces than images of other objects. We aimed to develop a computational model of visual ERP generation to study this phenomenon which consisted of a three-dimensional convolutional neural network (CNN) connected to a recurrent neural network (RNN). Approach. The CNN provided image representation learning, complimenting sequence learning of the RNN for modeling visually-evoked potentials. We used open-access data from ERP Compendium of Open Resources and Experiments (40 subjects) to develop the model, generated synthetic images for simulating experiments with a generative adversarial network, then collected additional data (16 subjects) to validate predictions of these simulations. For modeling, visual stimuli presented during ERP experiments were represented as sequences of images (time x pixels). These were provided as inputs to the model. By filtering and pooling over spatial dimensions, the CNN transformed these inputs into sequences of vectors that were passed to the RNN. The ERP waveforms evoked by visual stimuli were provided to the RNN as labels for supervised learning. The whole model was trained end-to-end using data from the open-access dataset to reproduce ERP waveforms evoked by visual events. Main results. Cross-validation model outputs strongly correlated with open-access (r = 0.98) and validation study data (r = 0.78). Open-access and validation study data correlated similarly (r = 0.81). Some aspects of model behavior were consistent with neural recordings while others were not, suggesting promising albeit limited capacity for modeling the neurophysiology of face-sensitive ERP generation. Significance. The approach developed in this work is potentially of significant value for visual neuroscience research, where it may be adapted for multiple contexts to study computational relationships between visual stimuli and evoked neural activity.

This article concerns comparative studies on the Automatic Speech Recognition (ASR) model incorporated with the Large Language Model (LLM) used for medical interviews. The proposed solution is tested on polish language benchmarks and dataset with medical interviews. The latest ASR technologies are based on convolutional neural networks (CNNs), recurrent neural networks (RNNs) and Transformers. Most of them work as end-to-end solutions. The presented approach in the case of the Whisper model shows a two-stage solution with End-To-End ASR and LLM working together in a pipeline. The ASR output is an input for LLM. The LLM is a component by which the output from ASR is corrected and improved. Comparative studies for automatic recognition of the Polish language between modern End-To-End deep learning architectures and the ASR hybrid model were performed. The medical interview tests were performed with two state-of-the-art ASR models: OpenAI Whisper incorporated with LLM and Scribe ElevenLabs. Additionally, the results were compared with five more end-to-end models (QuartzNet, FastConformer, Wav2Vec 2.0 XLSR and ESPnet Model Zoo) on Mozilla Common Voice and VoxPopuli databases. Tests were conducted for clean audio signal, signal with bandwidth limitation, and degraded. The tested models were evaluated on the basis of Word Error Rate (WER) and Character Error Rate (CER). The results show that the Whisper model performs by far the best among the open-source models. ElevenLabs Scribe model, on the other hand, performs best for Polish on both general benchmark and medical data.

The main neural network architectures applied for product demand forecasting are examined. Particular attention is given to Recurrent Neural Networks (RNN), which demonstrate high efficiency when working with time series and detecting dependencies within data. A detailed analysis is provided for the Long Short-Term Memory (LSTM) architecture, an advanced variant of RNN that effectively addresses the vanishing gradient problem, a common issue in traditional RNN. Due to its capability to retain information over extended periods, LSTM is ideal for tasks requiring the analysis of long-term dependencies, such as seasonal fluctuations in product demand. The application of Convolutional Neural Networks (CNN) is analyzed, which show strong performance when processing structured data, such as images or matrices. With their ability to effectively detect spatial dependencies, CNN can be useful for demand forecasting when complex relationships between various data features need to be considered, particularly for demand evaluations dependent on multiple factors. The architectures Feedforward Neural Networks (FNN), Gated Recurrent Units (GRU), Attention-based models (ABM) and Autoencoders (AE) are considered, which can also be applied to solve demand forecasting problems. A comparative analysis of the architectures is made in terms of forecast accuracy and ability to work with time series. By evaluating the training speed, data processing time, and reliability of these architectures in terms of the stability of results and forecast reliability, it has been determined that LSTM architectures are the most effective for product demand forecasting. These networks provide high accuracy and reliability of results and perform well with time series, which is crucial for forecasting demand under dynamic conditions.

In this digital era, there is an exponential growth of text-based content in the electronic world. Data as texts exist in the form of documents, social media posts on Facebook, Twitter, etc., logs, sensor data, and emails. Twitter is a social platform where users express their views on various aspects in a day to day life. Twitter produces over 500 million tweets daily that is 6000 tweets per second. Twitter data is, by definition, very noisy and unstructured in nature. Text classifications based on the machine learning techniques have problems like poor generalization ability and sparsity dimension explosion. Classifiers based on deep learning techniques are implemented to improve accuracy to overcome shortcomings of machine learning techniques and to avoid feature extraction processes and have high prediction accuracy and strong learning ability. In this work, the classification of tweets is performed on Covid-19 dataset by implementing deep learning techniques namely Convolution Neural Network (CNN), Recurrent Neural Network (RNN), Recurrent Convolution Neural Network (RCNN), Recurrent Neural Network with Long Short Term Memory (RNN+LSTM), and Bidirectional Long Short Term Memory with Attention (BI-LSTM + Attention). The algorithms are implemented using two-word embedding techniques namely Global Vectors for Word Representation (GloVe) and Word2Vec. RNN with Bidirectional LSTM model has performed better than all the classifiers considered. It has classified the text with an accuracy of 93% and above when used with GloVe and Word2Vec.

ABSTRACTIn this paper, the convolutional recurrent neural network (ConvLSTM) architecture is proposed to predict individual stock prices. The characteristics of stock data are automatically extracted through convolutional neural network (CNN). Afterward, the extracted features are inputted into a long short-term memory (LSTM) model with memory characteristics for prediction. Since CNN has been a representation learning model, it is quite appropriate for automatic feature extraction. Besides, the LSTM architecture of the recurrent neural network could effectively surmount the issues of gradient disappearance and expansion of the time series data. Ten stock historical data had been collected in the experimental data set. Furthermore, many commonly used technical indicators are calculated in advance for the expansion of the dimension of the training samples. The experimental results obtain a 3.449 RMSE (root-mean-square error) in average.

Global climate change has become a critical factor influencing marine and coastal safety. According to the Intergovernmental Panel on Climate Change (IPCC) Sixth Assessment Report (AR6), even with global mitigation efforts, the trend of global warming remains irreversible. The increasing intensity of future extreme climate events is expected to affect wave dynamics, storm surges, and coastal hazards. This study aims to assess long-term variations in extreme waves and storm surges around Taiwan under climate change scenarios and to establish design parameters that reflect future conditions for coastal hazard mitigation and engineering applications.Atmospheric data from the EC-Earth3 global climate model under the high-emission scenario (SSP5-8.5) were used to drive wave and ocean models simulating wave fields and storm surge residuals over the Northwest Pacific. To address the coarse resolution of global climate models, an artificial intelligence–based statistical downscaling framework was developed. This approach integrates Convolutional Neural Networks (CNNs) and Recurrent Neural Networks (RNNs) into a Convolutional Recurrent Neural Network (CRNN) architecture, improving spatial and temporal resolution and generating data representative of coastal-scale processes. The downscaled wave and surge results were analyzed using the Generalized Pareto Distribution (GPD) for extreme-value statistics to estimate design wave heights and storm surge residuals corresponding to return periods of 10, 25, 50, 75, 100, and 200 years. Statistical uncertainties were evaluated using a bootstrap resampling method.Results show that under the high-emission scenario, significant wave heights and storm surge residuals exhibit an increasing trend with longer return periods. Wave analysis reveals marked changes in northern coastal waters, where design wave heights increase from 3.05 m to 5.65 m. The eastern coast shows moderate increases (4.08–4.22 m), while the Taiwan Strait and southern waters remain relatively stable at about 3.6 m and 5.2 m, indicating higher sensitivity of the north to extreme forcing. For storm surges, historical maximum residuals ranged from 0.36 m to 1.49 m, while future projections range from 0.31 m to 1.35 m, showing a slight decrease but similar spatial distribution, with larger deviations along western and island coasts. Design storm surge residuals increase with return period, from about 0.20 m for a 10-year event to 0.32 m for a 200-year event. Under future conditions, increases are projected mainly for western and island coasts, with southern and eastern shores also showing gradual rises.Overall, extreme waves and storm surges around Taiwan exhibit long-term variations under climate change. Although short-term fluctuations remain moderate, both wave and surge intensities increase at longer return periods, implying that future coastal design standards should consider higher thresholds. The AI-based downscaling and extreme-value framework established in this study supports quantitative assessment of coastal hazards, engineering design, and adaptation planning in Taiwan.

Following recent advancements in deep learning and artificial intelligence, spoken language identification applications are playing an increasingly significant role in our day-to-day lives, especially in the domain of multi-lingual speech recognition. In this article, we propose a spoken language identification system that depends on the sequence of feature vectors. The proposed system uses a hybrid Convolutional Recurrent Neural Network (CRNN), which combines a Convolutional Neural Network (CNN) with a Recurrent Neural Network (RNN) network, for spoken language identification on seven languages, including Arabic, chosen from subsets of the Mozilla Common Voice (MCV) corpus. The proposed system exploits the advantages of both CNN and RNN architectures to construct the CRNN architecture. At the feature extraction stage, it compares the Gammatone Cepstral Coefficient (GTCC) feature and Mel Frequency Cepstral Coefficient (MFCC) feature, as well as a combination of both. Finally, the speech signals were represented as frames and used as the input for the CRNN architecture. After conducting experiments, the results of the proposed system indicate higher performance with combined GTCC and MFCC features compared to GTCC or MFCC features used individually. The average accuracy of the proposed system was 92.81% in the best experiment for spoken language identification. Furthermore, the system can learn language-specific patterns in various filter size representations of speech files.