High-performance laser power converters for simultaneous wireless information and power transfer

5G-based green broadband communication system design with simultaneous wireless information and power transfer

Radio frequency (RF) signals have been relied upon for both wireless information delivery and wireless charging to the massively deployed low-power Internet of Things (IoT) devices. Extensive efforts have been invested in physical layer and medium-access-control layer design for coordinating simultaneous wireless information and power transfer (SWIPT) in RF bands. Different from the existing works, we study the coding controlled SWIPT from the information theoretical perspective with practical transceiver. Due to its practical decoding implementation and its flexibility on the codeword structure, unary code is chosen for joint information and energy encoding. Wireless power transfer (WPT) performance in terms of energy harvested per binary sign and of battery overflow/underflow probability is maximised by optimising the codeword distribution of coded information source, while satisfying required wireless information transfer (WIT) performance in terms of mutual information. Furthermore, a Genetic Algorithm (GA) aided coding design is proposed to reduce the computational complexity. Numerical results characterise the SWIPT performance and validate the optimality of our proposed GA aided unary coding design.

Chapter 10 - Transmit beamforming for simultaneous wireless information and power transfer

In cognitive Wireless Radio networks, information transfer and power transfer are given special consideration in next-generation wireless networking devices like Simultaneous Wireless Information and Power Transfer. The benefit of integrating cognitive network concepts is that it provides greater efficiency on energy and spectrum to address interference, fading, and path loss, among many other issues, in certain critical applications. Energy harvesting (EH) is a secure and cost-effective method of powering up cluster heads when needed. The proposed method considers two phases. The first phase is energy harvesting of SUs transferred in power signals send by the hybrid access point during wireless power transfer (WPT). While in the second phrase, Wireless Information Transfer (WIT) phase, the captured energy is used while simultaneously acquiring transmission possibilities. In addition, a fuzzy-based cluster using a greedy algorithm is used to reduce PU secrecy outages and to provide the best ideal result. These may be identified using a convolutional neural network (CNN) to detect and classify distinct attack types. This paper presents an efficient resource allocation using fuzzy logic-based clustering and greedy algorithms, which can provide better performance than other technologies. The subsystem for cognitive radio networks is configured, and the primary nodes’ secrecy is maintained and free of three attacks, and the results are simulated using MATLAB tools.

In this paper, a new mathematical approach for the analysis and optimization of cellular-enabled low-energy mobile devices with simultaneous wireless information and power transfer capabilities is introduced. The proposed methodology relies on modeling the locations of the base stations as points of a spatial Poisson point process, and it leverages stochastic geometry for system-level analysis. The tradeoffs emerging from simultaneous wireless information and power transfer transmission are characterized through the concept of “feasibility regions” and are quantified through the joint cumulative distribution function of harvested power and rate. To gain insight on the achievable performance, in addition, an upper bound is proposed, and its accuracy is discussed. The system model encompasses a realistic channel model that accounts for line-of-sight (LOS) and non-LOS (NLOS) links, different cell association criteria, practical receivers based on time switching and power splitting schemes, and directional beamforming. The analysis shows that optimal values for the time switching and power splitting ratios exist and that directional beamforming and network densification are capable of enhancing system performance. More specifically, high directional antennas lead cellular networks to operate in the noise-limited regime, which is proved to provide optimal performance, and because of the existence of LOS and NLOS links, an optimal deployment density for the base stations is proven to exist for typical system setups.

Antenna beamforming for Simultaneous Wireless Information and Power Transfer (SWIPT) and Wireless Power Transfer (WPT) in an indoor 6G communication system is presented in this paper. The objective function is to maximize the total harvesting power for the SWIPT and WPT nodes with the constraints of the bit error rate and minimum harvesting power. In the study, the power-splitting ratio between harvesting power and decoding information can be adjusted for the SWIPT node. Due to the non-convex problem, we use Self-Adaptive Dynamic Differential Evolution (SADDE) to optimize the designed multi-objective function. We use a symmetric antenna array to study three situations of distance—closer, farther, and similar—between the transmitting antenna and the individual SWIPT and WPT nodes in this paper. Experimental results show that the overall harvesting efficiency is improved, especially in the case of SWIPT nodes closer to the transmitter. The total harvesting power can be improved by 86.7% in the total short-distance case, and by 7.87% in the total long-distance case.

This work presents some recent solutions that exploit the wireless power transfer (WPT) technology for energizing moving vehicles and machinery tools. Such technology is currently experiencing unprecedented interests in non-traditional RF/microwave sectors fields, such the industrial automation and the railway transportation safety. Near-field electromagnetic coupling solutions are presented showing that, in order to obtain efficient performances for broad ranges of operating conditions, the nonlinear electromagnetic co-design of the entire WPT system, from the energy source to the receiver load, needs to be carried out. This technology can be combined with wireless data transfer, thus realizing integrated systems able to simultaneously control the energy transfer and the transmission of data. The adopted operating frequencies are in the MHz range, which is only recently considered for this kind of applications. In particular this work focuses on three different systems: the first one demonstrates the constant powering of “on the move” industrial charts at 6.78 MHz, regardless of the relative position of the transmitter and the receiver sub-systems; the second one presents a novel design of a balise transportation system adopting a high efficiency GaN-based transmitter designed to keep its performance over a wide range of loading conditions; the last one consists of the simultaneous wireless power and data transfer, to a rotating machinery tool, automatically controlled by the powering system based on the coexistence of frequency-diverse inductive and capacitive couplings.

In this paper, we provide a comprehensive literature survey on simultaneous wireless information and power transfer (SWIPT) in multi-antenna systems. We first review recent contributions on the theory analysis of SWIPT from information theoretic standpoint and introduce the tradeoff between information transfer and power transfer under various settings. Then, we focus on the utilization of multi-antenna techniques to solve existing problems of SWIPT. Contributions on the implementation aspects of multi-antenna SWIPT are summarized. The performance of SWIPT is evaluated by different metrics, therefore, we review the works on dynamic SWIPT optimization based on objective function using multi-antenna techniques. In addition, the implementation of SWIPT brings up secure issue. Thus, we summarize recent works on secure SWIPT. Finally, we present researches combining SWIPT with state-of-the-art techniques due to potential application in different scenarios.

In this letter, we consider a multiple-input-multiple-output (MIMO) downlink system with simultaneous wireless information and power transfer (SWIPT), where the information sent to the desired receiver (DR) may be wiretapped by the malicious energy harvesting (EH) receivers (potential eavesdroppers). Assuming the channel state information (CSI) of the EH receivers is not perfectly known at the transmitter, we aim to maximize the worst-case secrecy rate by jointly designing the precoding matrix, AN covariance matrix and power splitting ratio, under the constraints of total transmit power and harvested energy at receivers. The formulated problem is non-convex and semi-infinite, which is hard to tackle. To solve it, we first deal with the non-convexity caused by CSI errors with the aid of the S-Procedure, and then employ the Taylor series approximation techniques to transfer the nonconvex problem into a convex optimization problem. Based on that, we propose an iterative algorithm with proved convergence to solve the original problem. Simulation results are finally provided to show the effectiveness of our proposed robust transmit design.

In this paper, we propose various kinds of two-way multi-antenna relaying with simultaneous wireless information and power transfer (SWIPT) and investigate their performance. Specifically, we first consider a two-way relay network where two single-antenna end nodes communicate with each other through a multi-antenna relay node that is energy constrained. This relay node harvests energy from the two end nodes and use the harvested energy for forwarding their information. Six relaying schemes that support the considered network then build on the power splitting-based relaying and time switching-based relaying protocols. The average bit error rates of these schemes are evaluated and compared by computer simulations considering several network parameters, including the number of relay antennas, power splitting ratio, and energy harvesting time. Such evaluation and comparison provide useful insights into the performance of SWIPT-based two-way multi-antenna relaying.

In 5G wireless networks, the system capacity and the number of users will be significantly increased. However, the energy consumed for the communication will also be increased, which results in low system energy efficiency. Simultaneous wireless information and power transfer (SWIPT) can enable the user to perform energy harvesting from the radio-frequency signals parallel with the information decoding, which can effectively improve the system energy efficiency. In this paper, we study the energy efficiency optimization problem for the orthogonal frequency-division multiplexing-based 5G wireless networks with SWIPT, in which the subcarrier and power allocation are jointly optimized to maximize the system energy efficiency for single user and multiple user cases. For those two cases, through mathematical transforming, we use the Dinkelbach iterative method and the Lagrange dual method to solve the non-convex energy efficiency optimization problem. Simulation results show that compared with other algorithms, our proposed algorithm can achieve higher energy efficiency.

This paper considers simultaneous wireless information and power transfer (SWIPT) mechanisms in a relaying network with finite blocklength (FBL) codes. The reliability of the network is optimized under both a power splitting (PS) protocol and a proposed joint PS and time switching (TS) protocol. Under both protocols, we first determine the overall error probability formulation of the SWIPT-enabled two-hop transmission in the FBL regime. Subsequently, we state and solve optimization problems minimizing the overall error probability. Via numerical analysis, we show the appropriateness of our analytical model and demonstrate the performance advantage of the proposed protocol in comparison to TS and PS protocols. In addition, we provide interesting insights on the system behavior by characterizing the impact of the blocklength, transmit power and packet size on the reliability performance.

An energy balance cluster network framework based on Simultaneous Wireless Information and Power Transfer

In this paper, we study the Simultaneous Wireless Information and Power Transfer (SWIPT) in a Single-Input Single-Output (SISO) two-user Orthogonal Frequency Division Multiplexing (OFDM) Interference Channel (IFC). We assume that the transmitters are non-cooperative and have perfect knowledge of the local Channel State Information (CSI). We show that the necessary condition for the optimal transmission strategy at high SNR is for the energy transmitter to transmit its signal by allocating its transmit power on a single subcarrier. Accordingly, we propose a one-subcarrier selection method for the energy transmitter and identify the achievable rate-energy region. In addition, we further enlarge the achievable rate-energy region by enabling a basic form of transmitter cooperation where messages are exchanged to inform the energy transmitter about the subcarriers unutilized by the information transmitter.

Adopting the concept of simultaneous wireless information and power transfer (SWIPT), applied over an integrated architecture of receiver, we propose a solution for an improved information decoder. Our research concludes to an enhanced performance with dual objective of pursuing a lower symbol error rate, while at the same time achieving the highest energy harvested in the battery. Information is conveyed by the intensity power levels of the signal, while with the use of pulse energy detection techniques, we can successfully decode it through the energy variation of the receiver. Our contribution, relies on a new sophisticated detection scheme, for non-coherent sequential detection in the integrated receiver. A Viterbi-type trellis-search algorithm, combined with selective store strategy is applied, resulting in a low-complexity, while at the same time more efficient in terms of memory requirements. Simulation results, approach the numerical ones as the observation window L → ∞, thus demonstrating that our proposed sequential decoder leads to a novel SWIPT solution with gains, in terms of SER, lower computational complexity, high energy harvested and memory efficiency.