Resource Allocation by Fuzzy Based Cluster Using Greedy Algorithm for Secure Communication

5G-based green broadband communication system design with simultaneous wireless information and power transfer

Radio frequency (RF) signals have been relied upon for both wireless information delivery and wireless charging to the massively deployed low-power Internet of Things (IoT) devices. Extensive efforts have been invested in physical layer and medium-access-control layer design for coordinating simultaneous wireless information and power transfer (SWIPT) in RF bands. Different from the existing works, we study the coding controlled SWIPT from the information theoretical perspective with practical transceiver. Due to its practical decoding implementation and its flexibility on the codeword structure, unary code is chosen for joint information and energy encoding. Wireless power transfer (WPT) performance in terms of energy harvested per binary sign and of battery overflow/underflow probability is maximised by optimising the codeword distribution of coded information source, while satisfying required wireless information transfer (WIT) performance in terms of mutual information. Furthermore, a Genetic Algorithm (GA) aided coding design is proposed to reduce the computational complexity. Numerical results characterise the SWIPT performance and validate the optimality of our proposed GA aided unary coding design.

Chapter 10 - Transmit beamforming for simultaneous wireless information and power transfer

Realising both wireless information transfer (WIT) and wireless power transfer (WPT) in the same RF spectral band has imposed great challenges on the system design but the spectral efficiency can be substantially improved, which triggers the significant research interest in the simultaneous wireless information and power transfer (SWIPT). In order to fully exploit the limited spectral resources, a non-orthogonal-multiple-access (NOMA) technique aided SWIPT system is considered for simultaneously realising both of WIT and WPT, which consists of a single access point (AP), a single WPT user and a pair of WIT users. The AP delivers the requested information to the pair of WIT users by adopting the NOMA technique. In order to maximise the amount of energy received by the WPT user, a novel constellation rotation based modulation scheme is proposed for constructively combining the symbols requested by the pair of the WIT users by optimising the constellation rotation angle. By considering the sensitivity of the energy harvester, the simulation results demonstrate that our modulation scheme is capable of efficiently increasing the energy harvested by the WPT user without incurring additional symbol detection errors.

This paper presents the design of a bidirectional wireless power and information transfer system. The wireless information transfer is based on near-field technology, utilizing communication coils integrated into power transfer coils. Compared with conventional far-field-based communication methods (e.g., Bluetooth and WLAN), the proposed near-field-based communication method provides a peer-to-peer feature, as well as lower latency, which enables the simple paring of a transmitter and a receiver for power transfer and the real-time updating of control parameters. Using the established communication, control parameters are transmitted from one side of the system to another side, and the co-control of the inverter and the active rectifier is realized. In addition, this work innovatively presents the communication-signal-based synchronization of an inverter and a rectifier, which requires no AC current sensing in the power path and no complex algorithm for stabilization, unlike conventional current-based synchronization methods. The proposed information and power transfer system was measured under different operating conditions, including aligned and misaligned positions, operating points with different charging powers, and forward and reverse power transfer. The results show that the presented prototype allows a bidirectional power transfer of up to 1.2 kW, and efficiency above 90% for the power ranges from 0.6 kW to 1.2 kW was obtained. Furthermore, the integrated communication is robust to the crosstalk from the power transfer and misalignment, and a zero BER (bit error rate) and ultra-low latency of 15.36 µs are achieved. The presented work thus provides a novel solution to the synchronization and real-time co-control of an active rectifier and an inverter in a wireless power transfer system, utilizing integrated near-field-based communication.

Far-field wireless power transfer (WPT) and simultaneous wireless information and power transfer (SWIPT) have become increasingly important in radio frequency (RF) and communication communities recently. The problem of modulation design for SWIPT has however been scarcely addressed. In this paper, a modulation scheme based on asymmetric phase-shift keying (PSK) is considered, which improves the SWIPT rate-energy tradeoff region significantly. The nonlinear rectifier model, which accurately models the energy harvester, is adopted for evaluating the output direct current (DC) power at the receiver. The harvested DC power is maximized under an average power constraint at the transmitter and a constraint on the rate of information transmitted via a multi-carrier signal over a flat fading channel. As a consequence of the rectifier nonlinearity, this work highlights that asymmetric PSK modulation provides benefits over conventional symmetric PSK modulation in SWIPT and opens the door to systematic modulation design tailored for SWIPT.

This paper proposes a robust simultaneous wireless power and information transfer (SWPIT) system with constant current (CC) or constant voltage (CV) output. This system achieves stable output and high-misalignment-tolerant wireless charging under variable transfer distance and load, even when the system is detuned. First, the frequency and output characteristics are analyzed based on the autonomous circuit principle and coupled mode theory. A method of phase synchronization and eigenfrequency tracking is presented to reduce the fluctuation of output. Second, benefiting from the frequency characteristics of this autonomous system, a low-delay wireless information transfer based on the parity-time symmetry is realized. Moreover, a closed-loop control strategy is designed for CC or CV output. Finally, an experimental prototype is established. The experimental results show that the maximum change rate of output is 2.6% in CC mode and 1.2% in CV mode, within 40% misalignment distance of the largest size in the Y-direction and 10.5% detuning rate.

Antenna beamforming for Simultaneous Wireless Information and Power Transfer (SWIPT) and Wireless Power Transfer (WPT) in an indoor 6G communication system is presented in this paper. The objective function is to maximize the total harvesting power for the SWIPT and WPT nodes with the constraints of the bit error rate and minimum harvesting power. In the study, the power-splitting ratio between harvesting power and decoding information can be adjusted for the SWIPT node. Due to the non-convex problem, we use Self-Adaptive Dynamic Differential Evolution (SADDE) to optimize the designed multi-objective function. We use a symmetric antenna array to study three situations of distance—closer, farther, and similar—between the transmitting antenna and the individual SWIPT and WPT nodes in this paper. Experimental results show that the overall harvesting efficiency is improved, especially in the case of SWIPT nodes closer to the transmitter. The total harvesting power can be improved by 86.7% in the total short-distance case, and by 7.87% in the total long-distance case.

A Wireless Sensor Network (WSN), a combination of autonomous devices, with the properties of sensing, processing and communication, cooperatively monitor physical and environmental conditions. Energy Harvesting (EH) from the surroundings and storing energy for computational purposes can prolong the continuity of operations and life-time of sensor nodes. In this paper we propose a method of wireless power and information transfer in a WSN. The proposed harvest-then-transfer protocol in Wireless Power Communication Networks (WPCN), harvests energy in the downlink and transfers information in the uplink, nodes can be classified into Data Transmitting (DT) or Energy Receiving (ER) based on their energy levels. The ER nodes then get energy while DT nodes transmit data. In a WPCN, the Hybrid access point (H-AP) consists of power beacon (PB) and AP. The PB provides power to the ER nodes while DT nodes send data to the AP in each communication frame. The DT nodes use the Frames Slotted ALOHA (FSA) anti-collision protocol to reduce collisions while sending data. The proposed scheme can be used to achieve a proper power available for nodes in a given frame size.

In this paper, a new mathematical approach for the analysis and optimization of cellular-enabled low-energy mobile devices with simultaneous wireless information and power transfer capabilities is introduced. The proposed methodology relies on modeling the locations of the base stations as points of a spatial Poisson point process, and it leverages stochastic geometry for system-level analysis. The tradeoffs emerging from simultaneous wireless information and power transfer transmission are characterized through the concept of “feasibility regions” and are quantified through the joint cumulative distribution function of harvested power and rate. To gain insight on the achievable performance, in addition, an upper bound is proposed, and its accuracy is discussed. The system model encompasses a realistic channel model that accounts for line-of-sight (LOS) and non-LOS (NLOS) links, different cell association criteria, practical receivers based on time switching and power splitting schemes, and directional beamforming. The analysis shows that optimal values for the time switching and power splitting ratios exist and that directional beamforming and network densification are capable of enhancing system performance. More specifically, high directional antennas lead cellular networks to operate in the noise-limited regime, which is proved to provide optimal performance, and because of the existence of LOS and NLOS links, an optimal deployment density for the base stations is proven to exist for typical system setups.

In this paper, we provide a comprehensive literature survey on simultaneous wireless information and power transfer (SWIPT) in multi-antenna systems. We first review recent contributions on the theory analysis of SWIPT from information theoretic standpoint and introduce the tradeoff between information transfer and power transfer under various settings. Then, we focus on the utilization of multi-antenna techniques to solve existing problems of SWIPT. Contributions on the implementation aspects of multi-antenna SWIPT are summarized. The performance of SWIPT is evaluated by different metrics, therefore, we review the works on dynamic SWIPT optimization based on objective function using multi-antenna techniques. In addition, the implementation of SWIPT brings up secure issue. Thus, we summarize recent works on secure SWIPT. Finally, we present researches combining SWIPT with state-of-the-art techniques due to potential application in different scenarios.

Energy harvesting (EH), which refers to replenishing energy from the environment, is demonstrated to be a promising approach in reducing the operational expenses (OPEX) and increasing the network lifetime of emerging wireless communication technologies by eliminating the need for frequent battery replacing or recharging of wireless devices. Among various ambient energy sources, the focus of this dissertation is on wireless power transfer (WPT) considering the unique characteristic of radio frequency (RF) signals; that is, they inherently carry both information and energy. A particularly interesting scenario arises when sources support simultaneous wireless information and power transfer (SWIPT) to provide a remote, controllable, and on-demand energy source. In this context, one of the promising deployment approaches is SWIPT-enabled cognitive radio networks (CRNs), which offer significant gains in terms of spectral and energy efficiencies. One of the practical scenarios of RF-powered CRN is deploying a number of distributed cognitive sensor nodes, equipped with RF EH modules, to sense a specific area and send the sensed data to an access point while coexisting with a primary licensed network. However, exploiting the full potentials of SWIPT-enabled CRNs is subject to carefully aligning the requirements of the EH unlicensed secondary receivers (SRs) with those of the legitimate primary receivers (PRs). In light of this, the first contribution of this thesis focuses on investigating the problem of beamforming for the downlink of multi-user multiple-input single-output (MU-MISO) CRNs. With the objective of minimising the transmission power of the secondary base station (SBS), optimal and suboptimal solutions for the formulated optimisation problem are provided by jointly optimising the transmit beamforming vector at the SBS and adjusting the parameters of the energy harvesters at the SRs. It is shown that the obtained solutions are efficient in meeting the EH and quality-of-service (QoS) requirements of the SRs and the levels of interference accepted by the PRs. Apart from SWIPT-enabled CRNs, relay-assisted SWIPT networks are envisioned to be a promising framework offering extended coverage, diversity gains, and enhanced energy efficiency. In this case, the relay network itself can benefit from the relayed transmissions in terms of saving energy, and the harvested energy can be used to charge relay nodes and extend their lifetime as compensation for their role of data forwarding. Nonetheless, a concrete performance analysis on the impact of the involved system parameters such as, the energy conversion efficiency and the location of the EH relay terminal, on the trade-off between the achievable information transfer efficiency and the harvested energy level is crucial for the successful implementation of SWIPT in this context. This inspired the research work in the next two contributions with the main focus on developing novel comprehensive analytical frameworks for the investigation and evaluation of SWIPT relaying systems. Specifically, the second contribution is dedicated to examining the application of noncoherent modulation, which is recognised as an energy efficient modulation scheme for SWIPT, due to its ability to eliminate the need of instantaneous channel state information (CSI) estimation/tracking. Through adopting a moments-based approach, novel expressions are derived for the outage probability, achievable throughput, and average symbol error rate (ASER) of dual-hop SWIPT relaying systems. Furthermore, new asymptotic analytical results are derived for the high SNR regime and are then utilised to analytically quantify the achievable diversity order. The proposed mathematical tools are demonstrated to be an accurate and efficient means by which one can conduct a thorough analysis on the system performance without the burden of Monte Carlo simulations. Finally, the third contribution focuses on SWIPT relaying systems operating in the presence of impulsive non-Gaussian noise, which is typical in several practical scenarios. Several studies show sufficient evidences that impulse man-made noise is encountered in various metropolitan, indoor, and underwater wireless applications. Examples of these sources include automotive ignition, electronic devices, household appliances, medical equipment, and industrial equipment. To characterise the behavior of the system performance under this type of noise, an efficient analytical framework is developed where novel closed-form xpressions for the pairwise error probability (PEP) are derived for two relaying schemes, namely, blind relaying and CSI-assisted relaying, employed under two assumptions imposed on the deployed EH process; namely, instantaneous EH (IEH) and average EH (AEH). Apart from being accurate, the derived expressions are shown to be efficient in quantifying the diversity order of the system and providing a comprehensive study on the impact of the severity of impulsive noise on the behavior of the system.

Here, the authors investigate robust secure transmission for wireless information and power transfer in heterogeneous networks (HeNets) under the deterministic and stochastic CSI errors, respectively, where one macrocell base station (MBS) and one femtocell base station (FBS) respectively serve to macrocell users (MUs) and femtocell users (FUs). Meanwhile, FUs acquire energy from the FBS and multiple eavesdroppers attempt to wiretap its downlink information. To secure the wireless information and power transfer, the authors propose an artificial noise (AN)‐aided transmission design. Under the deterministic CSI error, the authors jointly design the beamforming and AN vectors of the MBS and FBS to minimise the total transmit power, while satisfying the constraints on the signal‐to‐interference plus noise (SINR) requirement at each MU, energy harvesting (EH) and secrecy outage probability requirement at each FU. This formulated problem is non‐convex. Utilising S‐procedure and successive convex approximation technique, the authors successfully transfer it into a series of convex problems. Under the stochastic CSI error, the joint design problem is formulated with a range of outage probabilistic constraints. Further, the authors, respectively, resort to large deviation and Bernstein‐type inequalities, S‐procedure to convert it into solvable forms. Simulation results demonstrate the effectiveness of the authors’ proposed design.

This work presents some recent solutions that exploit the wireless power transfer (WPT) technology for energizing moving vehicles and machinery tools. Such technology is currently experiencing unprecedented interests in non-traditional RF/microwave sectors fields, such the industrial automation and the railway transportation safety. Near-field electromagnetic coupling solutions are presented showing that, in order to obtain efficient performances for broad ranges of operating conditions, the nonlinear electromagnetic co-design of the entire WPT system, from the energy source to the receiver load, needs to be carried out. This technology can be combined with wireless data transfer, thus realizing integrated systems able to simultaneously control the energy transfer and the transmission of data. The adopted operating frequencies are in the MHz range, which is only recently considered for this kind of applications. In particular this work focuses on three different systems: the first one demonstrates the constant powering of “on the move” industrial charts at 6.78 MHz, regardless of the relative position of the transmitter and the receiver sub-systems; the second one presents a novel design of a balise transportation system adopting a high efficiency GaN-based transmitter designed to keep its performance over a wide range of loading conditions; the last one consists of the simultaneous wireless power and data transfer, to a rotating machinery tool, automatically controlled by the powering system based on the coexistence of frequency-diverse inductive and capacitive couplings.

This paper considers secure communication in a multiuser multiple-input single-output (MISO) downlink system with simultaneous wireless information and power transfer. We study the design of resource allocation algorithms minimizing the total transmit power for the case when the receivers are able to harvest energy from the radio frequency. In particular, the algorithm design is formulated as a non-convex optimization problem which takes into account artificial noise generation to combat potential eavesdroppers, a minimum required signal-to-interference-plus-noise ratio (SINR) at the desired receiver, maximum tolerable SINRs at the potential eavesdroppers, and a minimum required power delivered to the receivers. We adopt a semidefinite programming (SDP) relaxation approach to obtain an upper bound solution for the considered problem. The tightness of the upper bound is revealed by examining a sufficient condition for the global optimal solution. Inspired by the sufficient condition, we propose two suboptimal resource allocation schemes enhancing secure communication and facilitating efficient energy harvesting. Simulation results demonstrate a close-to-optimal performance achieved by the proposed suboptimal schemes and significant transmit power savings by optimization of the artificial noise generation.