• Home
  • Search
  • High Throughput In-Line Coating Metrology Development for Solid Oxide Fuel Cell Manufacturing
  • https://doi.org/10.2172/1784259Copy DOI Icon

High Throughput In-Line Coating Metrology Development for Solid Oxide Fuel Cell Manufacturing

  • May 21, 2021
  • Bryan Blackburn +11 more
Show More
  • Abstract
  • Literature Map
  • Similar Papers
Abstract

Coatings play key roles in solid oxide fuel cell (SOFC) stack durability. For example, diffusion barrier coatings on Cr-containing interconnect and balance of plant (BOP) components protect electrodes from Cr poisoning over the long operational lifetimes (>10,000 hours) of the fuel cell stack. Common defects in coatings, such as cracks, pinholes, and porosity, result in a failure to protect the electrodes, resulting in shorter operational lifetime and thus higher cost. It is very unlikely, even in the best coating process, that all these defects can be mitigated, hence identifying critical defects in parts, and removing defective parts from production before they can damage the stack, becomes paramount. Furthermore, these quality control techniques must be operational in the production/assembly line (in-line), i.e., high throughput and non-destructive, and cost effective. Redox Power Systems, LLC (Redox) together with the National Renewable Energy Laboratory (NREL) developed much needed high throughput, in-line metrology techniques for protective coatings. The overall goal of the project is to lower cost while increasing robustness, reliability, and endurance of SOFC stacks. To accomplish this, we had several objectives, including: to identify key coating and substrate defects that lead to coating failure through the use of detailed characterization methods (e.g., microscopy, XRD, EDS, electrochemistry); to assess capabilities of in-line metrology techniques, e.g., optical profilometry (Redox) and thermography (NREL), to probe these defects, or evidence thereof; demonstrate long-term performance of “defect-free” protective coatings, as identified by in-line metrology, in solid oxide fuel cell (SOFC) stack operation. In the first part of this project, the ability to identify key defects expected to lead to coating and SOFC degradation using in-line metrology tools were evaluated. Coated interconnect samples with controlled defect types and populations were tested under conditions similar to SOFC operation, followed by detailed post-test analysis to reveal the defects responsible for observed degradation. In the second part of the project, the optimal in-line metrology techniques and methodologies were used to map the defect distribution in full-size interconnects with critical defects intentionally allowed to exist in some cases. These interconnects underwent SOFC testing for extended periods (up to ~3,000 hours) followed by post-test analysis to evaluate the effectiveness of in-line metrology techniques in mitigating MCO coating related degradation. Key accomplishments in this project included the following: Demonstrated ASR of < 0.05 ohm-cm2 at 650 °C for 1,000 hours with low defect (determined by in-line metrology) interconnect samples (average ASR=37 milliohms-cm2 after over 1,000 hours). Demonstrated that low defect coatings on interconnects (as screened using in-line metrology) have low volatilization of chromium at ~650 °C for 1,000 hours as detected using Cr-getter material (< 5 at% increase above baseline); 1022 hour duration tests under humidified, elevated temperature (750 °C rather than 650 °C) compared a base case against different coating thicknesses. Demonstrated capability to identify initial key defects of interest with in-line metrology techniques using up to 8 cm by 10 cm having coatings with and without intentional defects of interest using thermal imaging and optical profilometry. Correlated key defects identified using metrology techniques with observed coating performance (e.g., ASR and Cr volatility). Conducted several 4 cm by 4 cm cell tests using MCO-interconnects that were pre-screened using some of the metrology techniques developed in the project (e.g., optical profilometry). An analysis of ASR measurements were able to show that defect-free coatings resulted in the anticipated performance in the cell tests.

Similar Papers
  • Research Article
  • Citations14

Recent developments in control and integration of solid oxide fuel cells: From stack to system

  • Nov 01, 2025
  • Renewable and Sustainable Energy Reviews
  • Xinyu Lu +2
  • Research Article
  • Citations18

Development of mathematical transfer functions correlating Solid Oxide Fuel Cell degradation to operating conditions for Accelerated Stress Test protocols design

  • Feb 06, 2021
  • Journal of Power Sources
  • Pierpaolo Polverino +2
  • Single Report

Transformational Solid Oxide Fuel Cell (SOFC) Technology

  • Jan 30, 2022
  • Hossein Ghezel-Ayagh
  • Research Article
  • Citations9

Modelling and Simulation of a Biomass Gasification-solid Oxide Fuel Cell Combined Heat and Power Plant using Aspen Plus

  • Jul 01, 2009
  • ARROW@Dublin Institute of Technology (Dublin Institute of Technology)
  • Wayne Doherty +2
  • Conference Article
  • Citations2

Solid Oxide Fuel Cell Degradation, Recovery and Control via the Electrical Terminals

  • Jun 30, 2014
  • Peter A Lindahl +4
  • Conference Article
  • Citations2

Dynamic Modeling of SOFC Cogeneration Systems for Light Commercial Applications

  • Jun 30, 2014
  • Kevin J Albrecht +1
  • Research Article

Optical Studies of Dry and Wet Reformed Methane on Solid Oxide Fuel Cell Anodes

  • Apr 29, 2015
  • Electrochemical Society Meeting Abstracts
  • Syed Noorullah Qadri +5
  • Research Article

Microstructure Simulation of Solid Oxide Fuel Cells Under Carbon Deposition Using Phase-Field Modeling

  • Nov 24, 2025
  • Electrochemical Society Meeting Abstracts
  • Ruiyu Zhang +4
  • Dissertation

System Analysis of an Internal Combustion Engine (ICE) – Solid Oxide Fuel Cell (SOFC) Hybrid Cycle

  • Jan 01, 2023
  • Jose Javier Colon Rodriguez
  • Research Article
  • Citations5

MINI CHP BASED ON THE ELECTROCHEMICAL GENERATOR AND IMPEDED FLUIDIZED BED REACTOR FOR METHANE STEAM REFORMING

  • Jan 01, 2017
  • Alternative Energy and Ecology (ISJAEE)
  • A M Dubinin +3
  • Research Article
  • Citations28

A computational fluid dynamics and finite element analysis design of a microtubular solid oxide fuel cell stack for fixed wing mini unmanned aerial vehicles

  • Feb 27, 2019
  • International Journal of Hydrogen Energy
  • B Hari +3
  • Research Article

Field Test Results Of Residential SOFC Co-Generation System At Tokyo Gas

  • Jun 26, 2013
  • Electrochemical Society Transactions
  • Tadaaki Ishikawa +1
  • Research Article
  • Citations69

Cr-poisoning in (La,Sr)(Co,Fe)O3 cathodes after 10,000 h SOFC stack testing

  • Apr 10, 2012
  • Journal of Power Sources
  • J Andreas Schuler +5
  • Research Article
  • Citations54

Parametric exergy analysis of a tubular Solid Oxide Fuel Cell (SOFC) stack through finite-volume model

  • Apr 25, 2009
  • Applied Energy
  • F Calise +2
  • Research Article

A unified standard thermal resistance-impedance-circuit approach for dynamic characteristic analysis of grid-connected solid oxide fuel cell system

  • Apr 01, 2026
  • Case Studies in Thermal Engineering
  • Tong Hao +5
Cactus Communications logo

Copyright 2026 Cactus Communications. All rights reserved.